GardCharge GC101 User Manual GardCharge GC101 Smart USB Timer Charger Protector - A perfect companion device for your Smart Phone,Power Bank and other USB Devices
Product Interface
( As a standalone device , or use with optional App for advanced control ) USB port for smart phone , power bank , or other USB devices GGaardCChharge GardCharge
LED Green - ON Red - OFF RESET
(Re - activate previous User Setting)
App Description ( for advanced control ) App Icon Notations Real - Time Count Down Time in HH:MM:SS format Count Down Timer Set - Time in HH : MM : SS format Display in : Meter Mode / Timer Mode
/ Power Meter Factory Default ( 6 hours ) Satting for :
Count Down Timer /
Over Current Setting /
Low Current Limit & Time Offset Count Down Timer
( Set - Time in HH : MM : SS format ) EX : Connect the device for more than 1 hour , is power off Over Current Setting
( Over load protection ) EX : Connect the device for more than5.0A , is power off Low Current Limit & Time Offset
( Avoid overcharging ) EX : When a low current is less than 0.05A , continuously over 20 minutes is power off Timer ON/OFF Smart Wireless Control ( EX : Power bank / Lamp / Fan... ) ON / OFF Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device , pursuant to Part 15 of the FCC Rules . These limits are designed to provide reasonable protection against harmful interference in a residential installation . This equipment generates , uses and can radiate radio frequency energy and , if not installed and used in accordance with the instructions , may cause harmful interference to radio communications . However , there is no guarantee that interference will not occur in a particular installation . If this equipment does cause harmful interference to radio or television reception , which can be determined by turning the equipment off and on , the user is encouraged to try to correct the interference by one of the following measures :
. Reorient or relocate the receiving antenna . Increase the separation between the equipment and receiver . Connect the equipment into an outlet on a circuit different from that to which the receiver is connected . Consult the dealer or an experienced radio / TV technician for help . FCC Caution : To assure continued compliance , any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
( Example - use only shielded interface cables when connecting to computer or peripheral devices ) . FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter . than 4.0A , is power off This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions :
( 1 ) This device may not cause harmful interference , and
( 2 ) This device must accept any interference received , including interference that may cause undesired operation . FCC ID : UVXGC101001