all | frequencies |
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|
manual | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
User Manual | Users Manual | 992.61 KiB | February 20 2023 | |||
1 |
|
Internal Photos | Internal Photos | 1.30 MiB | February 20 2023 | |||
1 | Internal Photos | February 20 2023 | ||||||
1 |
|
External Photos | External Photos | 1.18 MiB | February 20 2023 | |||
1 | External Photos | February 20 2023 | ||||||
1 |
|
Label & Label Location | ID Label/Location Info | 75.93 KiB | February 20 2023 | |||
1 |
|
Antenna Specification | Test Report | 413.24 KiB | February 20 2023 | |||
1 |
|
Appendix BLE report part 1 | Test Report | 4.93 MiB | February 20 2023 | |||
1 |
|
Appendix BLE report part 2 | Test Report | 4.24 MiB | February 20 2023 | |||
1 |
|
Attestation Statements US agent for service of process | Attestation Statements | 297.75 KiB | February 20 2023 | |||
1 |
|
Attestation Statements part i ii | Attestation Statements | 268.29 KiB | February 20 2023 | |||
1 |
|
BLE Report | Test Report | 1.39 MiB | February 20 2023 | |||
1 | Block Diagram | Block Diagram | February 20 2023 | confidential | ||||
1 |
|
Confidentiality Letter | Cover Letter(s) | 224.22 KiB | February 20 2023 | |||
1 | Operation Description | Operational Description | February 20 2023 | confidential | ||||
1 |
|
Power of Attorney Letter | Cover Letter(s) | 259.06 KiB | February 20 2023 | |||
1 |
|
SAR exclusion report | RF Exposure Info | 555.21 KiB | February 20 2023 | |||
1 | Schematics | Schematics | February 20 2023 | confidential | ||||
1 |
|
Test Setup Photos | Test Setup Photos | 393.80 KiB | February 20 2023 | |||
1 | Attestation Statements | February 20 2023 | ||||||
1 | RF Exposure Info | February 20 2023 |
1 | User Manual | Users Manual | 992.61 KiB | February 20 2023 |
Owner's Manual Arm-type Fully Automatic Digital Blood Pressure Monitor Model DBP-62A2B Arm Type Arm Type Document No. : JDBP-A204-054 Version: Z Date of Issue: 2022.3.4 Contact Information The lay operator or lay responsible or ganization should contact the manufacturer or the representative of manufacturer.
-for assistance,if needed,in setting up,using or maintaining the product,or
-to report unexpected operation or events. Manufactured by JOYTECH Healthcare Co.,Ltd. No.365, Wuzhou Road,Yuhang Economic Development Zone, Hangzhou City,311100 Zhejiang,China Email: info@sejoy.com Telephone: +86-571-81957767 Fax: +86-571-81957750 Contents 1 Safety Notice 2 Safety Notice ............................................................... 02 Unit Illustration ......................................................... 06 Important Testing Guidelines ..................................... 09 Quick Start ................................................................. 10 Unit Operation ........................................................... 11 Battery Installation ........................................... 11 System Settings .................................................. 12 Applying the Arm Cuff ....................................... 14 Thank you for purchasing the DBP-62A2B Blood Pressure Monitor. The unit has been constructed using reliable circuitry and durable materials. Used properly, this unit will provide years of satisfactory use. Indications for use: The Arm-type Fully Automatic Digital Blood Pressure monitors are intended to measure blood pressure(systolic and diastolic) and pulse rate of adults and adolescents over 12 years of age. All functions can be used safely and values can be read out in one LCD DISPLAY. Measurement position is on adult upper arm only. The PATIENT is an intended OPERATOR. Blood pressure measurement determined with this device are equivalent to those obtained by a trained observer using the cuff/ stethoscope auscultation method, within the limits Testing ................................................................ 15 prescribed by the Recognized Consensus Standard (IEC 80601-2-30) for electronic Power Off .............................................................18 Memory Check and Last 3 Test Average
.............19 Memory Deletion ..................................................20 Low Battery Indicator ...........................................20 Bluetooth requirement and connection ...............21 Troubleshooting .....................................................23 Blood Pressure Information ........................................ 24 sphygmomanometers. Precautions to Ensure Safe, Reliable Operation 1. Do not drop the unit. Protect it from sudden jars or shocks. 2. Do not insert foreign objects into any openings. 3. Do not attempt to disassemble the unit. 4. Do not crush the pressure cuff. 5. If the unit has been stored at temperatures below 0 , leave it in a warm place for about 15 minutes before using it. Otherwise, the cuff may not inflate properly. 6. If the unit has been stored at temperatures above 40 , leave it in a cool place for about Blood Pressure Q&A ................................................... 27 15 minutes before using it. Otherwise, the cuff may not inflate properly. Maintenance ............................................................... 28 7. Do not store the unit in direct sunlight, high humidity or dust. 8.To avoid any possibility of accidental strangulation, keep this unit away from children Specifications ............................................................. 30 and do not drape tubing around your neck. Warranty .................................................................... 32 Electromagnetic Compatibility Information .............. 33 Additional Notes ........................................................ 37 9.Ensure that children do not use the instrument unsupervised; some parts are small enough to be swallowed. 10.Some may get a skin irritation from the cuff taking frequent readings over the course of the day, but this irritation typically goes away on its own after the monitor is removed. Safety Notice 3 Safety Notice 4 Important Instructions Before Use 1. Do not confuse self-monitoring with self-diagnosis. Blood pressure measurements should only be interpreted by a health professional who is familiar with your medical history. 2. Contact your physician if test results regularly indicate abnormal readings. 3. If you are taking medication, consult with your physician to determine the most appropriate time to measure your blood pressure. NEVER change a prescribed medication without first consulting with your physician. 4. Individuals with serious circulation problems may experience discomfort. Consult your physician prior to use. 5. For persons with irregular or unstable circulation resulting from diabetes, liver disease, arteriosclerosis or other medical conditions, there may be variations in blood pressure values measured at the wrist versus at the upper arm. Monitoring the trends in your blood pressure taken at either the arm or the wrist is nevertheless useful and important. 6. People suffering from vascular constriction, liver disorders or diabetes, people with cardiac pacemakers or a weak pulse, and women who are pregnant should consult their physician before measuring their blood pressure themselves. Different values may be obtained due to their condition. 7. People suffering from arrhythmias such as atrial or ventricular premature beats or atrial fibrillation only use this blood pressure monitor in consultation with your doctor. In certain cases oscillometric measurement method can produce incorrect readings. 8.Too frequent measurements can cause injury to the patient due to blood flow interference. 9.The cuff should not be applied over a wound as this can cause further injury. 10.DO NOT attach the cuff to a limb being used for IV infusions or any other intravascular access, therapy or an arterio-venous (A-V) shunt. The cuff inflation can temporarily block blood flow, potentially causing harm to the patient. 11.The cuff should not be placed on the arm on the side of a mastectomy. In the case of a double mastectomy use the side of the least dominant arm. 12.Pressurization of the cuff can temporarily cause loss of function of simultaneously used monitoring equipment on the same limb. 13.A compressed or kinked connection hose may cause continuous cuff pressure resulting in blood flow interference and potentially harmful injury to the patient. 14.Check that operation of the unit does not result in prolonged impairment of the circulation of the patient. 15. Product is designed for its intended use only. Do not misuse in any way. 16. Product is not intended for infants or individuals who cannot express their intentions. 17. Prolonged over-inflation of the bladder may cause ecchymoma of your arm. 18. Do not disassemble the unit or arm cuff. Do not attempt to repair. 19. Use only the approved arm cuff for this unit. Use of other arm cuffs may result in incorrect measurement results. 20. The system might produce incorrect readings if stored or used outside the manufacturer's specified temperature and humidity ranges. Make sure to store the blood pressure monitor, children, pets and pests are outside of accessible range. 21. Do not use the device near strong electrical or electromagnetic fields generated by cell phones or other devices, they may cause incorrect readings and interference or become interference source to the device. 22. Do not mix new and old batteries simultaneously. 23. Replace batteries when Low Battery Indicator appears on screen. Replace both batteries at the same time. 24. Do not mix battery types. Long-life alkaline batteries are recommended. 25. Remove batteries from device when not in operation for more than 3 months. 26. Dispose batteries properly; observe local laws and regulations. 27. Only use a recommended class II AC Medical approved adaptor which comply with 2MOPP, and pass IEC 60601-1, IEC 60601-1-2(or FCC) standard . An unauthorized adapter may cause fire and electric shock. 28. Advising operator that Instruction manual/ Booklet must be consulted. 29. Do not use the device during transport vehicles for influencing measurement accuracy such as patient transport in an ambulance or helicopter. 30. Contains small parts that may cause a chocking hazard if swallowed by infants. 31. Please align the polarities of each battery with the +ve and -ve signs imprinted on the battery housing when you replace the batteries . 32.Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper operation. If such use is necessary, this equipment and the other equipment should be observed to verify that they are operating normally. 33.Portable RF communications equipment (including peripherals such as antenna cables and external antennas) should be used no closer than 30 cm (12 inches) to any part of the unit, including cables specified by the manufacturer. Otherwise, degradation of the performance of this equipment could result. 34.the blood pressure monitors equipped with bluetooth(BT) module is only transmit historical blood pressure (BP) from the subject device to a user-supplied digital device, and is not intended for active patient monitoring. 35. It cannot be maintained or repaired during normal use. 36. The service life of the product is about 5 years, the service life of the cuff is about 2 years, and the battery is about 3 months. WARNING SIGNS AND SYMBOLS USED Keep Dry Keep off Sunlight Type BF Equipment Instructions For Use MUST be Consulted Discard the used product to the recycling collection point according to local regulations IP21 IP 21 indicate dust proof and waterproof grade. Number 2 indicate that Protected against solid foreign objects of 12.5 mm and greater; Number 1 indicate that Protection against vertically falling water drops . MR Magnetic Resonance unsafe Safety Notice 5 Unit Illustration 6 Federal Commulcation Commission (FCC) Interference Statement Monitor Unit 1.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2.This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 3.This equipment complies with radio frequency exposure limits set forth by the FCC for an uncontrolled environment. 4.This device must not be co-located or operating in conjunction with any other antenna or transmitter. 5.Essential performance:
Electrosurgery interference recovery Limits of the error of the manometer Reproducibility of the BLOOD PRESSURE DETERMINATION Refer 202.6.2.101 IEC 80601-2-30 Refer 202.12.1.102 IEC 80601-2-30 Refer 201.12.1.107 IEC 80601-2-30 LCD
Memery Button
Set
" Button
START/STOP " Button USB Adapter Jack Unit Illustration 7 Unit Illustration 8 Arm Cuff Contents T A R M L E F i n c h )
( 0 . 4 ~ 0 . 8 i n c h ) 2 2 ~ 3 6 c m 8 . 6 ~ 1 4 . 2 1 ~ 2 c m A r M a i n t e r y I N D E X Arm Cuff Air Plug Display Air Tube 1.Monitor Unit T A R M L E F i n c h )
( 0 . 4 ~ 0 . 8 i n c h ) 2 2 ~ 3 6 c m 8 . 6 ~ 1 4 . 2 1 ~ 2 c m A r M a i n t e r y I N D E X 3.Arm Cuff Group 1 Group 2 Bluetooth Indicator MAM Display Last 3 Tests Average I.H.B./AFib symbol Low Battery Indicator 9 Owner's Manual Arm-type Fully Automatic Digital Blood Pressure Monitor Model DBP-62A2B Arm Type 2.Owner's Manual 4.Storage Bag 5.2MOPPMedical AC Adapter(DC5.0 V,1000mA)
(recommended, not provided) Important Testing Guidelines 9 Quick Start 10 1. Avoid eating, exercising, and bathing for 30 minutes prior to testing. 2. Sit in a calm environment for at least 5 minutes prior to testing. 1. Install batteries 2. Insert cuff air plug into the behind side of monitor unit. (See Figure B)
. (See Figure A ) 3
. Do not stand while testing. Sit in a relaxed position while keeping your arm level with your heart. 4. Avoid speaking or moving body parts while testing. 5. While testing, avoid strong electromagnetic interference such as microwave ovens and cell phones. 6
. Wait 3 minutes or longer before re-testing. 7
. Try to measure your blood pressure at the same time each day for consistency. 8
. Test comparisons should only be made when monitor is used on the same arm, in the same position, and at the same time of day. 9. This blood pressure monitor is not recommended for people with severe arrhythmia. 10. Do not use this blood pressure monitor if the device is damaged. Figure A Figure B 3. Remove thick clothing from the arm area. 4. Rest for several minutes prior to testing. Sit down in a quiet place, preferably at a desk or table, with your arm resting on a firm surface and your feet flat on the floor.
(See Figure C ) Figure C 5. Apply cuff to your left arm and keep level with your heart. Bottom of cuff should be placed approximately 1-2cm (0.4-0.8'') above elbow joint. (See Figures D&E) 1
2 c m
0
. 4
0
. 8
) Figure D Figure E 6. Press " START/STOP " Button to start testing. Unit Operation Battery Installation Slide battery cover off as indicated by arrow. Install 4 new AAA alkaline batteries according to polarity. Close battery cover. 11 Unit Operation 12 System Settings With power off, press "SET" button to activate System Settings. The Memory Group icon flashes. 1. Memory group Settings
.Press the SET key to enter the memory group setting, and press the MEM key to select the memory group. 2. Time/Date setting
"SET" button Press MEM button. Press minute in the same way. Every time the selection and continue in succession
( month,day,hour, minute,12/24 hours)
"SET" button again to set the Time/Date mode. Set the year first by adjusting the again to confirm current month. Continue setting the dat, hour and
"SET" button is pressed, it will lock in your AC Adapter jack is on the back side of the monitor. Medical AC adapter(DC 5.0 V,1000mA) can be used with the device (recommended, not provided). The adapter connect pin should be positive inside and negative outside with a 2.1mm coaxial joint. Do not use any other type of AC adapter as it may harm the unit. USB Adapter Jack Note:Power supply is specified as part of ME EQUIPMENT. Unit Operation 13 Unit Operation 14 3.Voice Setting Press pressing the "MEM" button.
"SET" button to enter voice setting mode. Set voice format ON or OFF by 4.Volume Setting Press "SET" button to enter volume setting mode. Set the voice volume by adjusting the "MEM" button . There are six volume levels. 5.MAM Setting Press "SET" button to enter MAM setting mode. Set voice format ON or OFF by pressing the "MEM" button. 6. Saved Settings While in any setting mode, press " START/STOP " button to turn the unit off. All information will be saved. Note: If unit is left on and not in use for 3 minutes, it will automatically save all information and shut off. Applying the Arm Cuff 1. Firmly insert air plug into opening located on behind side of monitor unit. 2. With sticky nylon section facing outward, insert end of cuff underneath metal ring
. of cuff 3. Fasten cuff about 1-2cm (0.4-0.8'') above the elbow joint. For best results apply cuff to bare arm and keep level with heart while testing
. 1
2 c m
0
. 4
0
. 8
) Note: Do not insert air plug into opening located on right side of monitor unit. This opening is designed for an optional power supply only. Unit Operation Testing 1. Power On 15 Unit Operation 16 2. Testing After cuff inflation, air will slowly rise as indicated by the corresponding cuff pressure Press and hold "START/STOP" button to turn the unit on. The LCD screen will appear value. A flashing " " will appear simultaneously on screen signaling heart beat for one second as unit performs a quick diagnosis. A voice tone will indicate when unit is detection. ready for testing.DBP-62A2B have the voice function will carry on the voice broadcast prompt) Note: Unit will not function if residual air from previous testing is present in cuff. The LCD will flash " " until pressure is stabilized. Note: Keep relaxed during testing. Avoid speaking or moving body parts. 3. Result Display The screen will display measurements for systolic and diastolic blood pressure with voice broadcast. An indicator representing the current measurement will appear next to the corresponding WHO Classification. Unit Operation 4. Continuous measurement mode is enabled(MAM Function) 17 Unit Operation Power Off 18 Start the continuous measurement mode. Before the end of the third measurement, the The " START/STOP " button can be pressed to turn off the unit in any mode. The unit can corresponding data will be displayed at the end of each measurement, and a 1-minute countdown turn off the power itself about 3 minutes no operation in any mode. will be performed on the screen. At the end of the third measurement, if there is a significant deviation in one of the three data sets, the next set of tests will be performed and the third measurement results will be displayed. Before that, if the difference between the three sets of data Safety Precaution: If pressure in arm cuff becomes too extreme while testing, was too large, the error was reported directly, while the screen ran a 1-minute countdown to the press the " START/STOP " button to turn power off. The cuff pressure will rapidly next measurement. If three consecutive measurements are wrong, the sphygmomanometer will dissipate once the unit is off. automatically shut down. If three sets of normal data are measured under correct operation, the third correct data is not displayed on the screen, and the average value of the three times is displayed directly. Indicators representing the current measure will appear next to the Arm Shake Indicator corresponding WHO classification. If there is arm movement during the measurement, the " " icon may flash. Indicates that the measurement results may be inaccurate, and the situation will be recorded at the end of the measurement as a reminder. Cuff loose Indicator When starting the measurement, " "will be displayed when the cuff is properly wound. OK When the cuff is too loose, " "will be displayed. At this time, please wear the cuff correctly and start measuring again. Note: Refer to Page 24~25 for detail WHO Blood Pressure Classification Information. Irregular Heartbeat Indicator If the monitor detects an irregular heart rhythm two or more times during the measuring process, the Irregular Heartbeat Symbol " "appears on screen along with IHB measurement results. Irregular heartbeat rhythm is defined as rhythm that is either 25%
slower or faster than the average rhythm detected while measuring systolic blood pressure and diastolic blood pressure. Consult your physician if the Irregular Heartbeat Symbol
" " frequently appears with your test results. IHB 17 Unit Operation Last 3 Tests Average With power off, press the "MEM" button to activate screen display. After the unit performs a self-diagnosis ,the screen will display the average test results from the last 3 readings of the last group used. The "AVG" symbol will appear along with the corresponding WHO Blood Pressure Indicator. The Memory Check mode can be accessed by pressing "MEM" button. To check the average results from other groups, please press corresponding "GROUP1" button or "GROUP2" button. 19 Unit Operation Memory Check You may check past test results by using the "MEM" button. The most recent test result and oldest test result in memory can be viewed by pressing and holding the "MEM" button. Upon activating test results. you can press the "MEM"
button to scroll through all test results stored in memory. To check the average results from other groups, please press corresponding "GROUP1" button or "GROUP2" button. 20 Press the " MEM" button again, you may check past test results.Upon activating test results, you can press the" MEM"button to scroll through all test results stored in memory. The LCD will display the last memory as NO: 01 reading. ("MEM"button means turn forward) Memory Deletion Memory for a selected group may be deleted while in Memory Check mode. Press and hold the " SET" button for approximately 3 seconds to delete all memory records from the selected group with voice broadcast "Memory Clear" and then transfer into testing mode. Press the
"START/STOP " button to turn the unit off. Note: Past test results will only be displayed from the most recently used memory group. To check past test results in other memory groups, you must Press corresponding button or select the desired group and then turn monitor off . ( See Select Memory Group on Page 16. ) Note: If the first memory data of the current memory group is measuredby the MAM, the LCD will show "MAM" and" AVG ". Note: If the last 3 readings were a MAM average, then the MAM average will be displayed. Note:Memory averaging function will only average individual readings. While reviewing the readings, the MAM average icon may appear on the screen. Press the Set button to review individual readings that make up the MAM average. Note: Memory cannot be recovered once it has been deleted. Low Battery Indicator The unit will broadcast "Low Battery" when battery life is depleting and unable to inflate cuff for testing. The " " appears simultaneously for approximately 5 seconds prior to shutting off. Replace batteries at this time. No memory loss will occur throughout this process. 19 Unit Operation 21 Unit Operation 22 Static Pressure Measurement In the power down state, press and hold the " START/STOP" button, and theninstall the batteries. Until the LCD screen is full, release the " START/STOP" button. 3. Create a new user login, or login with your existing user name and password. 4. Selection device Blood pressure monitor.
-Pairing your monitor with a Smart Device 1. Open the blood pressure monitor and follow the pairing instructions shown on your smart When the LCD screen displays the double zero, the bloodpressure meter is in static state. phone. Software version is displayed:10 is a software version in the figure. The date and time on your monitor will automatically be set when you pair it with your smart device. Note: Only Service personnel permitted to access to this mode, the mode unavailable in normal use. 2. Confirm that your monitor is connected successfully. Bluetooth requirements (Only Bluetooth models have this function When your monitor is connected successfully to your smart phone, it will be display The monitor requires a device with:
. Bluetooth 4.0 or later
. Android 5.0 or later
. IOS 9.0 or later And works with:
. iphone , iPod, iPad
. Android Phones and Tablets Bluetooth connection
-Using for the first time 1. Download the free JoyHealth App: On your mobile phone or table go to www.sejoy.com. Only the Bluetooth model has this feature. 2.Open the App on your phone or tablet. If requested, you should enable Bluetooth on your like below.
-Transfer your readings 3. Press the BP [START/STOP] button to turn your monitor off. 1. As soon as your measurement is complete, open the app on your smart phone to transfer your reedings. device. You can enable Bluetooth under the Settings menu on your smart phone or table. 2. You can view your blood pressure readings on the app. Unit Operation 23 Blood Pressure Information 24 Troubleshooting Abnormal phenomenon Cause analysis Processing method Blood Pressure Abnormal sphygmomanometer The armband is tied too tight or too loose, Or the arm strap is tied incorrectly;
Roll the armband correctly Move the arm during measurement or Electronic sphygmomanometer Stay quiet, keep your arm steady, and do not move the monitor Speaking, nervous or emotional during measurement Incorrect measurement posture There is interference in charging process or improper operation in measuring process Instead of talking, take deep breaths to calm your mood and relax your body Adjust posture, see
"Blood pressure gauge Wearing See operation Instructions. The following table shows the error signs that may occur during measurement, possible causes and handling methods. Please measure again using the correct method Error display The cause of the problem The solution Blood pressure is the force of blood pushing against the walls of arteries. It is typically measured in millimeters of mercury (mmHg.) Systolic blood pressure is the maximum force exerted against blood vessel walls each time the heart beats. Diastolic blood pressure is the force exerted on blood vessels when the heart is resting between beats. An individual's blood pressure frequently changes throughout the course of a day. Excitement and tension can cause blood pressure to rise, while drinking alcohol and bathing can lower blood pressure. Certain hormones like adrenaline (which your body releases under stress) can cause blood vessels to constrict, leading to a rise in blood pressure. Er1 Er2 Er3 Er4 Er5 Er6 Er0 Can't detect high and low pressure Please fasten the cuff before measuring If these measuring numbers become too high, it means the heart is working harder Cuff too loose or loose Please fasten the cuff before measuring than it should. Improper compression caused by arm or body movement Hold the arm or body still and measure again The pressure exceeds 300mmHg Please fasten the cuff before measuring The pressure exceeds 15mmHg for 3 minutes Check whether the cuff is knotted or the vent valve is blocked. If the problem persists, contact the manufacturer Blood pressure measurements were out of range Please tighten and measure and measure again .If you cannot solve the problem,please contact the meanufacturer Four sets of results were measured that did not meet MAM requirementsr Please tighten and measure and measure again .If you cannot solve the problem,please contact the meanufacturer g H m m 200 150 100 50 Upper curve : systolic blood pressure Lower curve: diastolic blood pressure Battery dead Replace the battery or connect the power adapter (if any). 6 1 2 1 8 2 4 Time of day Example: fluctuation within a day (male, 35 years old) Note: If you cannot solve the abnormal situation by yourself, you can consult the manufacturer or the manufacturer's designated unit by phone. It is forbidden to disassemble and repair without permission. If necessary, professional maintenance personnel can ask the manufacturer for the list of components and circuit schematic diagram. Blood Pressure Information 25 Blood Pressure Information 26 WHO Blood Pressure Classification Indicator The DBP-62A2 is equipped with a classification indicator based on established guidelines Health Reminder Hypertension is a dangerous disease that can affect the quality of life. It can lead from the World Health Organization. The chart below (color coded on monitor unit) to a lot of problems including heart failure, kidney failure, and cerebral hemorrhaging. indicates test results. Severe Hypertension Moderate Hypertension Mild Hypertension High-n ormal Normal Optimal By maintaining a healthy lifestyle and visiting your physician on a regular basis, hypertension and relative diseases are much easier to control when diagnosed in their early stages.(When in OptimalNormal and High-normal,the light is green. When in Mild Hypertension,the light is yellow.When in Moderate Hypertension,the light is orange. When in Severe Hypertension,the light is red.) Systolic
( mmHg ) 180 160 140 130 120 Severe Hypertension Moderate Hypertension Mild Hypertension High-normal Normal Optimal
Blood Pressure Classification Indicator 80 85 90 100 110 Diastolic
( mmHg ) Note: Do not be alarmed if an abnormal reading occurs. A better indication of an individual's blood pressure occurs after 2-3 readings are taken at the same time each day over an extended period of time. Consult your physician if test results remain abnormal. Blood Pressure Q&A 27 Maintenance 28 Q: What is the difference between measuring blood pressure at home or at a professional healthcare clinic?
A: Blood pressure readings taken at home are now seen to give a more accurate account as they better reflect your daily life. Readings can be elevated when taken in a clinical or medical environment. This is known as White Coat Hypertension and may be caused by feeling anxious or nervous. Note: Abnormal test results may be caused by:
1. Improper cuff placement Make sure cuff is snug-not too tight or too loose. Make sure bottom of the cuff is approximately 1-2cm (1/2'') above the elbow joint. 2. Improper body position Make sure to keep your body in an upright position. 3. Feeling anxious or nervous Take 2-3 deep breaths, wait a few minutes and resume testing. Q: What causes different readings?
A: Blood pressure varies throughout the course of a day. Many factors including diet, stress, cuff placement, etc. may affect an individual's blood pressure. Q: Should I apply the cuff to the left or right arm? What is the difference?
A: Either arm can be used when testing, however, when comparing results, the same arm should be used. Testing on your left arm may provide more accurate results as it is located closer to your heart. Q: What is the best time of day for testing?
A: Morning time or any time you feel relaxed and stress free. 1. Avoid dropping, slamming, or throwing the unit. 2. Avoid extreme temperatures. Do not expose unit directly under sunshine. 3. When cleaning the unit, use a soft fabric and lightly wipe with mild detergent. Use a damp cloth to remove dirt and excess detergent. Maintenance 29 Specifications 30 4. Cuff Cleaning: Do not soak cuff in water! Apply a small amount of rubbing alcohol to a soft cloth to clean cuff's surface. Use a damp cloth (water-based) to wipe clean. Allow cuff to dry naturally at room temperature. The cuff must be cleaned and disinfected before use between different users. Product Description Arm-type Fully Automatic Blood Pressure Monitor Model Display DBP-62A2B LCD Digital Display Size:70mm x 59mm2.76" x 2.32"
5. Do not use petrol, thinners or similar solvents. Measurement Method Oscillometric Method 6. Remove batteries when not in operation for an extended period of time. 7. Do not disassemble product. Systolic Pressure 60mmHg260mmHg Diastolic Pressure 40mmHg200mmHg Pressure Pressure 0mmHg299mmHg 3mmHg Measurement Range Pulse 30 ~ 180 Beats/Minute Pulse 5%
Pressurization Automatic Pressurization Memory 2x120 Memories in Two Groups with Date and Time Irregular Heartbeat Detection WHO Classification Indicator Last 3 Tests Average Low Battery Detection Automatic Power-Off Voice Backlight MAM Function (Customizable voice toggle function) Bluetooth(DBP-62A2B) 4A AA batteries or Medical AC Adapter (DC5.0V, 1000mA)
(recommended, not provided) Approximately 2 months at 3 tests per day Approx.210g (7.41 oz) (excluding battery) Function Power Source Battery Life Unit Weight 8. It is recommended the performance should be checked every 2 years. 9. Expected service life: Approximately three years at 10 tests per day. 10.No service and maintenance while it is in use and maintenance only be performed by service personnel. Service and maintenance require parts, repair, technical support will be provided. Unit Dimensions Approx.124mm X 92mm X 43mm4.88" x 3.62" x 1.69"
Cuff Circumference Fits arm circumference 22-36 cm Fits arm circumference 22-42 cm Fits arm circumference 32-48 cm Specifications Temperature Operating Environment Humidity 10 ~ 40 (50 ~104 15% ~ 93%RH
) Pressure 800hPa~1060hPa Storage Environment Temperature:
-25 ~55
(-13 ~131 Humidity 93% RH Transport Environment Temperature:
-25 ~55
(-13 ~131
) Humidity 93% RH Classification:
Internal Powered Equipment,Type BF ,Cuff is the Applied Part Ingress Protection Rating:
IP21, Indoor Use Only Modulation Type GFSK 31 Warranty 32 Safety Standard(included but not limited) :
1. IEC 80601-2- 30, medical electrical equipment - part 2-30: particular requirements for the basic safety and essential performance of automated noninvasive sphygmomanometers. ( Cardiovascular) 2. ISO 81060- 2, non-invasive sphygmomanometers - part 2: clinical validation of automated measurement type. ( Cardiovascular) 3. AAMI / ANSI ES 60601- 1:2005/(R)2012 and C1:2009/ (R) 2012 and, a2: 2010/(r) 2012 ( consolidated text) medical electrical equipment - - part 1: general requirements for basic safety and essential performance 4. AAMI/ANSI/ IEC 60601-1- 2, Medical Electrical Equipment - - Part 1- 2: General Requirements For Basic Safety And Essential Performance - - Collateral Standard:
Electromagnetic Disturbances - - Requirements And Tests ( General II ( ES/ EMC)). 5. IEC 60601-1- 11, medical electrical equipment - part 1-11: general requirements for basic safety and essential performance - collateral standard: requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment. Version 5.0.1 BT Signal mode The Blood Pressure Monitor is guaranteed for 2-year from the date of purchase. If the Bluetooth Operation frequency 2.4GHz( 2400~2483. 5MHz) Antenna gain 0 dBi Bandwidth 2.0 MHz Specifications are subject to change without notice. Blood Pressure Monitor does not function properly due to defective components or poor workmanship, we will repair or replace it freely. The warranty does not cover damages to your Blood Pressue Monitor due to improper handling. Please contact local retailer for details. Electromagnetic Compatibility Information 33 The device satisfies the EMC requirements of the international standard IEC 60601-1-2. The requirements are satisfied under the conditions described in the table below. The device is an electrical medical product and is subject to special precautionary measures with regard to EMC which must be published in the instructions for use. Portable and mobile HF communications equipment can affect the device. Use of the unit in conjunction with non-approved accessories can affect the device negatively and alter the electromagnetic compatibility. The device should not be used directly adjacent to or between other electrical equipment. Table 1 Guidance and declaration of manufacturer-electromagnetic emissions The device is intended for use in the electromagnetic environment specified below. The customer or the user of the device should assure that it is used in such an environment. Electromagnetic Compatibility Information Table 2 34 Guidance and declaration of manufacturer-electromagnetic immunity The device is intended for use in the electromagnetic environment specified below. The customer or the user of the device should assure that it is used in such an environm-
ent. IMMUNITY test IEC 60601 test level Compliance level Electromagnetic environment
-guidance Electrostatic discharge (ESD) IEC 61000-4-2 8 kV contact 2 kV,4 kV, 8 kV, 15 kV air 8 kV contact 2 kV,4 kV, 8 kV, 15 kV air Floors should be wood, concrete or ceramic tile. If floors are covered with synthetic material, the relative humidity should be at least 30 %. Electrostatic transient/burst IEC 61000-4-4 2 kV , 100kHz, for AC power port 2 kV , 100kHz, for AC power port Mains power quality should be that of a typical commercial or hospital environment. Electromagnetic environment
-guidance The device uses RF energy only for its internal function. Therefore, its emissions are very low and are not likely to cause any interference in nearby electronic equipment. The device is suitable for use in all establishments, including domestic establishments and those directly connected to the public low-voltage power supply network that supplies buildings used for domestic purposes. Emissions test Compliance Radiated emission CISPR 11 Group 1, class B. Conducted emission CISPR 11 Group 1, class B. Harmonic emissions IEC 61000-3-2 Voltage fluctuations/
flicker emissions IEC 61000-3-3 Class A Complies Surge IEC 61000-4-5 0.5kV, 1kV
(differential mode) 0.5kV, 1kV
(differential mode) Mains power quality should be that of a typical commercial or hospital environment. 0 % UT;
0,5 cycle At 0, 45, 90, 135, 180, 225
, 270 and 315 0 % UT;
0,5 cycle At 0, 45, 90, 135, 180, 225
, 270 and 315 Voltage dips, short interrupti-
ons and voltage variations on p-
ower supply in-
put lines 0 % UT; 1 cycle and 70 % UT;
25/30 cycles Single phase:
at 0 0 % UT; 1 cycle and 70 % UT;
25/30 cycles Single phase:
at 0 IEC 61000-4-11 0 % UT;
250/300 cycle 0 % UT;
250/300 cycle Mains power quality should be that of a typical commercial or hospital environment. Power frequency
(50/60 Hz) magnetic field IEC 61000-4-8 30 A/m; 50Hz or 60Hz 30 A/m; 50Hz or 60Hz Power frequency magnetic fields should be at levels charactertic of a typical location in a typical comme-
rcial or hospital environment. Electromagnetic Compatibility Information 35 Electromagnetic Compatibility Information 36 Table 3 Guidance and declaration of manufacturer-electromagnetic immunity Nowadays, many RF wireless equipments have being used in various healthcare locations where medical equipment and/or systems are used. When they are used in close proximity to medical equipment and/or systems, the medical equipment and/or systems basic safety and essential performance may be affected. Arm-type Fully Automatic Digital Blood Pressure Monitor has been tested with the immunity test level in the below table and meet the related requirements of IEC 60601-1-2:2014. The customer and/or user should help keep a minimum distance between RF wireless communications equipment and this medical equipment and/or systems as recommended below. Test frequency
(MHz) Band
(MHz) Service Modulation Maximum power
(W) Distance
(m) Immunity test level
(V/m) 385 380-390 TETRA 400 0.3 27 1.8 2 0.2 0.3 0.3 2 0.3 28 9 28 Pulse modulation 18Hz FM 5 kHz deviation 1 kHz sine 450 430-470 GMRS 460 FRS 460 710 745 780 810 870 930 1720 1845 1970 704-787 LTE Band 13, 17 Pulse modulation 217Hz 800-960 GSM 800/900, TETRA 800, iDEN 820, CDMA 850, LTE Band 5 Pulse modulation 18Hz 1700-1990 GSM 1800;
CDMA 1900;
GSM 1900;
DECT;
LTE Band 1, 3, 4, 25; UMTS Pulse modulation 217Hz 2450 2400-2570 Bluetooth,WLAN, 802.11 b/g/n,RFID 2450,LTE Band 7 Pulse modulation 217Hz 2 0.3 28 5240 5500 5100-5800 5785 WLAN 802.11 a/n Pulse modulation 217Hz 0.2 0.3 9 Table 4 Recommended separation distances between portable and mobile RF communications equipment and the device The device is intended for use in an electromagnetic environment in which radiated therefore disturbances are controlled. The customer or the user of the device can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the device as recommended below, according to the maximum output power of the communications equipment. Rated maximum output power of transmitter Separation distance according to frequency of transmitter m 80 MHz to 800 MHz 800 MHz to 2.7 GHz W 0.01 0.1 1 10 100 0.12 0.38 1.2 3.8 12 0.23 0.73 2.3 7.3 23 For transmitters rated at a maximum output power not listed above, the recommended separation distance d in metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer. 2 0.3 28 NOTE1 At 80 MHz and 800 MHz, the separation distance for th frequency range applies. e higher NOTE2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from structures, objects and people. Additional Notes 37 Additional Notes 38 Important Instructions Before Use 1. WARNING: Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper operation. If such use is necessary, this equipment and the other equipment should be observed to verify that they are operating normally. 2.WARNING: PORTABLE RF communications equipment (including peripherals such as antenna cables and external antennas) should be used no closer than 30 cm (12 inches) to any part of Arm-
type Fully Automatic Digital Blood Pressure Monitor, including cables specified by the MANUFACTURER. Otherwise, degradation of the performance of this equipment could result. 3.The software identifier refer to the software evaluation report , and the file code is JYRJ210108001. 4.verify manometer pressure accuracy:
In the power down state, press and hold the " START/STOP" button, and theninstall the batteries. Until the LCD screen is full, release the " START/STOP" button. When the LCD screen displays the double zero, the bloodpressure meter is in static state. At this point, 500ml gas capacity, calibrated standard pressure gauge and manual pressure device can be connected to the sphygmomanometer through the sleeve interface of the sphygmomanometer, and manual pressure can be applied to the effective display range of the sphygmomanometer, and then the difference between the reading of the sphygmomanometer and that of the standard pressure gauge can be compared.This mode can be used to verify manometer pressure accuracy. 5.Contraindications:
Product is not intended for infants or individuals who cannot express their intentions. 6.Intended Use The digital blood pressure monitor are reusable for clinical and home use and are non-invasive blood pressure measurement systems designed to measure the systolic and diastolic blood pressure and pulse rate of adolescents and adults individual by using a non-invasive technique, which is a well-known technique in the market called the oscillometric method. it can measure the systolic blood pressure, diastolic blood pressure and pulse rated on up-arm,and the device is reusable for clinical or home use. 7.The patient is the operator:
the PATIENT is an intended OPERATOR. the PATIENT Do not carry out other maintenance operations except to replace the battery. 8.WARNING:
Do not modify this equipment without authorization of the manufacturer. 9. ESSENTIAL PERFORMANCE Maintenance advice:
Pressure calibration will be carried out when this product leaves the factory. Patients can use the method described in the section "Verify Manometer Pressure Accuracy" to verify the accuracy. If the accuracy deviation is large, please contact the manufacturer to recalibration. 10.Mechanical strength and resistance to heatThe resistance to heat will be retained by device during the EXPECTED SERVICE LIFE of the ME EQUIPMENT. 11.Do not place the blood pressure monitor and cuff at will. It will cause asphyxiation if the child swallows or twine around his neck. 12.The cuff and the case of the blood pressure monitor have been tested for biocompatibility and do not contain allergenic or harmful materials.Please stop using it if allergy occurs during use. 13.Warning:
Non-professionals do not modify the equipment, otherwise it will make the equipment measurement is not accurate. 14.Warning:
Do not expose the equipment for a long time, otherwise it will reduce the performance of the equipment. 15.Warning:
This device is not used for children and pets 16.Clean:
The equipment can be cleaned by lay operator according to the cleaning procedures in the instructions 17.Warning:
Do not use a damaged cuff for blood pressure measurement. 18.Warning:
When measuring with the cuff, if the tester feels seriously uncomfortable, press the button of the blood pressure monitor to deflate the cuff, or remove the cuff directly from the arm. 19.Warning:
If an unexpected reading occurs, the operator can take several more measurements and consult a doctor. 20.Warning:
This equipment is used outside the specified environment, may damage the equipment, and may be inaccurate measurement. 21.ME equipment not intended for use in conjunction with flammable agents ME equipment not intended for use in oxygen rich environment Correct Disposal of This Product
(Waste Electrical & Electronic Equipment) This marking shown on the product indicates that it should not be disposed with other household waste at the end of its life. To prevent potential harm to the environment or to human health, please separate this product from other types of wastes and recycle it responsibly. When disposing this type of product, contact the retailer where product was purchased or contact your local government office for details regarding how this item can be disposed in an environmentally safe recycling center. Business users should contact their supplier and check the terms and conditions of the purchasing agreement. This product should not be mixed with other commercial wastes for disposal. This product is free of hazardous materials.
1 | Label & Label Location | ID Label/Location Info | 75.93 KiB | February 20 2023 |
Size: 40mm x25mm Arm-Type Fully Automatic Digital Blood Pressure Monitor Model:
DBP-62A2B Manufacturers by JOYTECH Healthcare Co., Ltd. No. 365, Wuzhou Road, Yuhang Economic Develop-
ment Zone, Hangzhou City,311100 Zhejiang, China Power: 5.0V DC ,1000mA,5.0W; (or Batteries 4x 1.5V AAA) Series number:
Manufacturing Date:
FCC ID:2AQVU0035 Made in China IP21 MR
1 | Attestation Statements US agent for service of process | Attestation Statements | 297.75 KiB | February 20 2023 |
Attestation Statements Date: February 16, 2023 TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for FCC ID: 2AQVU0035 JOYTECH Healthcare Co.,Ltd. the undersigned, hereby authorize CTI U.S. Inc. to act as our designated U.S. agent for service of process, JOYTECH Healthcare Co.,Ltd. accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. CTI U.S. Inc. accepts the responsibility to act as designated U.S. agent for service of process, provides an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Information:
Company name: JOYTECH Healthcare Co.,Ltd. Contact Name: Lan Yingting Address: No.365, Wuzhou Road, Yuhang Economic Development Zone, Hangzhou City, Zhejiang, 311100, China Telephone No: 0571-81957767 Email: cel@sejoy.com U. S. Agent Information:
FRN: 0033406968 Name: CTI U.S. Inc. Address: Suite 230, 1455 CTI U.S. Inc.Lincoln Parkway, Atlanta, GA, 30346 Contact Person: Robin Zhang Tel.: 248-461-3673 Email: robin.zhang @cti-cert.com Applicant Signature: Dow jingtie4 Agent Signature:
(if the agent is different from the applicant) Applicant printed name: Lan Yingting Agent printed name: Robin Zhang
1 | Attestation Statements part i ii | Attestation Statements | 268.29 KiB | February 20 2023 |
JOYTECH Healthcare Co.,Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: February 14, 2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AQVU0035 JOYTECH Healthcare Co.,Ltd. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Signature: L On yet printed name: Lan Yingting Rev 2/13/2023 JOYTECH Healthcare Co.,Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: February 14, 2023 Ref: Attestation Statements Part 2.911(d)(5)(ii FCC ID: 2AQVU0035 JOYTECH Healthcare Co.,Ltd. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely, Signature: bow oy printed name: Lan Yingting Rev 2/13/2023
1 | Confidentiality Letter | Cover Letter(s) | 224.22 KiB | February 20 2023 |
JOYTECH HEALTHCARE CO., LTD. Federal Communications Commission Authorization and Evaluation Division Confidentiality Request regarding application for certification of FCC ID: 2AQVU0035 Pursuant to Sections 0.457 and 0.459 of the Commissions Rules, we hereby request confidential treatment of information accompanying this application as outlined below:
Exhibit Type File Name
(Block Diagram, Schematics, Operational (Block Diagram.pdf, Schematics.pdf, Description) Operational Description.pdf) The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Pursuant to DA04-1705 June 15, 2004 of the Commissions public notice, we also request temporary confidential treatment of information accompanying this application as outlined below:
Exhibit Type File Name Sincerely, Signature: | ee Tyoy printed name: Lan Yingting Rev 11/20/07
1 | Power of Attorney Letter | Cover Letter(s) | 259.06 KiB | February 20 2023 |
JOYTECH HEALTHCARE CO., LTD. Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: January 7, 2023 SUBJECT: FCC Application for (FCC 1D: 2AQVU0035) . *
To Whom It May Concern:
We, the undersigned, hereby authorize Mina Xu at Centre Testing International Group Co., Ltd / Building C, Hongwei Industrial Park Block 70, Bao'an District, Shenzhen, China on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by Mina Xu at Centre Testing International Group Co., Ltd /
Building C, Hongwei Industrial Park Block 70, Bao'an District, Shenzhen, China on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Signature: | pur yey printed name: Lan Yingting C:\Users\Administrator\Desktop\5. EED320818975 DBP-62A2B FCC 477 {F\POA Letter.docx
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2023-02-20 | 2402 ~ 2480 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2023-02-20
|
||||
1 | Applicant's complete, legal business name |
JOYTECH HEALTHCARE CO., LTD.
|
||||
1 | FCC Registration Number (FRN) |
0027764067
|
||||
1 | Physical Address |
No.365, Wuzhou Road, Yuhang Economic Development Zone
|
||||
1 |
No.365, Wuzhou Road
|
|||||
1 |
Hangzhou City, Zhejiang, N/A
|
|||||
1 |
China
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
T******@timcoengr.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
2AQVU
|
||||
1 | Equipment Product Code |
0035
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
L******** Y********
|
||||
1 | Title |
QA
|
||||
1 | Telephone Number |
0571-********
|
||||
1 | Fax Number |
0571-********
|
||||
1 |
c******@sejoy.com
|
|||||
app s | Technical Contact | |||||
n/a | ||||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Arm-type Fully Automatic Digital Blood Pressure Monitor | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Power listed is conducted. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Centre Testing International Group Co., Ltd
|
||||
1 | Name |
V**** Z****
|
||||
1 | Telephone Number |
N/A********
|
||||
1 |
z******@cti-cert.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0011000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC