FCC ID: W4512267 915 MHz LoRa Sensor

USER GUIDE LoRa SPY Ref : 11819G TABLE OF CONTENTS I. INTRODUCTION ........................................................................................................................................ 3 a) b) Product contents ....................................................................................................................................................... 3 Symbols ...................................................................................................................................................................... 3 II. INSTALLATION RECOMMENDATIONS ........................................................................................................ 3 a) b) Sources of disturbances or attenuation .................................................................................................................... 3 Positioning ................................................................................................................................................................. 4 III. PRESENTATION ........................................................................................................................................ 4 a) b) Control unit ................................................................................................................................................................ 4 LCD display ................................................................................................................................................................. 5 c) Mounting ................................................................................................................................................................... 5 IV. USE ..................................................................................................................................................... 5 a) OFF state .................................................................................................................................................................... 5 b) Activation ................................................................................................................................................................... 5 c) Turning Off ................................................................................................................................................................. 6 d) Actions on the touch-sensitive button ...................................................................................................................... 6 V. PROBE CONNECTIONS .......................................................................................................................... 6 VI. BATTERY REPLACEMENT .......................................................................................................................... 7 VII. CHARACTERISTICS .................................................................................................................................... 7 a) Compliance .............................................................................................................................................................. 11 VIII. MAINTENANCE ................................................................................................................................... 11 IX. SUITABILITY FOR USE ................................................................................................................................. 12 X. GUARANTEE ........................................................................................................................................... 16 XI. MAINTENANCE CONTRACT ...................................................................................................................... 16 XII. ENVIRONMENTAL PROTECTION .............................................................................................................. 16 JRI 2 I. INTRODUCTION The LoRa SPY is a recorder capable of measuring 1 or 2 physical quantities (T / TH or other quantity depending on the model) and transmitting by radio to monitoring software hosted on a platform. The radio transmission uses the LoRa long-distance network. The LoRa SPY (T0, T1 andT2) comply with EN 12830 and compatible with EN 13486 which defines procedures for periodic verification. a) Product contents 1 LoRa SPY 1 User guide b) Symbols RECYCLING: do not dispose of in a refuse dump or waste disposal bin. Comply with existing legislation for disposal. Power source: this device is powered by a 3.6VDC type AA lithium battery ( ch. V). CE LABELING: this device is certified to conform to European regulations for electrical safety, flammability, disruptive electromagnetic emissions, and immunity to environmental electrical disturbances. Opens www.jri-mysirius.com. FCC ID : W4512267 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation In accordance with FCC requirements, changes or modifications not expressly approved by JRI could void the user's authority to operate this product. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Do not use the device under conditions other than those described in the technical characteristics Risk of fire or explosion in the case of improper use:

- Recharging of the battery

- Short circuiting of the battery If the device is used in a manner not specified by the manufacturer, the protection provided by the device may be compromised. II. INSTALLATION RECOMMENDATIONS The LoRa SPY is a recorder which communicates by radio with software hosted on a Web platform via the LoRa long-distance public network or private network using a LoRa Gateway. To ensure optimal radio transmission, a certain number of recommendations must be respected, as any wireless transmission is subject to disturbances. a) Sources of disturbances or attenuation The presence of obstacles in the wave path around the LoRa SPY or between the LoRa SPY and the Gateway in case of use (wall, furniture, people) or near the antenna. JRI 3 The thickness of an obstacle in the wave path. The attenuation is greater diagonally than perpendicularly A solid metal wall will not allow transmission by radio. A perforated metal wall will allow waves to pass while attenuating them. b) Positioning The LoRa SPY units can be placed either inside or outside the enclosures. For installations outside the enclosure, mount the units sufficiently high on the walls to avoid interference with obstacles and foot traffic. The LoRa SPY uses the LoRa public network. Never place the LoRa SPY unit horizontally. If difficulties persist use the LoRa SPY with remote probe in order to position it in a zone of radio coverage. Also, some specific recommendations for exposure to magnetic fields must be followed : This equipment complies with FCCs radiation exposure limits set forth for an uncontrolled environment under the following conditions :

o This equipment must be installed and operated such that a minimum separation distance of 20cm is maintained between the radiator (antenna) and users/nearby persons body at all time. o This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter To ensure your safety during installation or an intervention on a device placed in a high position, use proper equipment which is in good condition and provides adequate stability, wear appropriate, non-slip shoes and install warning signs around the work area if the intervention takes place in an area of foot traffic. III. PRESENTATION a) Control unit Status LED Internal sensor Light sensor (T1 only) All Models TH3/U Models Battery access LCD display Touch-sensitive button Models T1/TH1 Sensor Models T2/T3 Digital Model Mounting eyelets Le LoRaSPY T1 is equipped with a detector of presence or absence of light. When the LoRaSPY unit is enclosed (in the dark) the measurements are no longer displayed (wheaeas the battery level, the RSSI and the network indicators still are) and its status LED continues to flash. JRI 4 b) LCD display Battery level indicator MySirius connection indicator LoRa networkconnection indicator Searching factory network blinking : Searching for LoRa network Fixed : LoRa network found Empty: LoRa Network not found Connected to MySirius c) Mounting RSSI radio reception level indicator Threshold overrun indicator (

High, Low) The LoRa SPY can be mounted in 2 different ways Using a tie wrap to attach it to the Magnetically monitored product Mounting eyelets IV. USE The LoRa SPY has 3 internal magnets for mounting on magnetic metal walls. Magnets The LoRa SPY can only be used with the My Sirius software hosted on a Web platform. a) OFF state As delivered, the LoRa SPY is turned off. It can neither emit nor receive signals. b) Activation 3 3 JRI 5 Once activated, the LoRa SPY measures and transmits its measurements to My Sirius, at the frequency defined in MySirius, then flashes regularly as a function of its status. c) Turning Off 3 d) Actions on the touch-sensitive button Touch duration Mode Activation Measurement

< 3s

-

1s = OK 1s = Technical alarm 3x1s = OK but paused 1s = In alarm state Off

-

V. PROBE CONNECTIONS

>8s during 3s The LoRa SPY remains activated

> 3s during 3s Off Off Front face / Display The Universal LoRa SPY has a quick connector facilitating the installation of different types of sensors. The sensors can be disconnected from the recorder for their replacement or for changing the recorder itself Resistive sensor input NC Resistive sensor power Analog input (Resistance Current Voltage) Logic, count or frequency input GND (0V) NV 4-20mA input Logic, count input 0-1V input

/!\ Connect only sensors which are compatible with the technical characteristics of the devices Sensor default detection is not possible in 0-20mA and 0-1V. JRI 6 VI. BATTERY REPLACEMENT Removing the battery Open the battery cover with a suitable object (2cts coin) to align the marks

(/!\0 = Open ; 1= Closed) Remove the battery from its lodging Replacing the battery Put the new battery in place respecting the polarity KEEP THE BATTERY AWAY FROM FIRE; DO NOT ATTEMPT TO RECHARGE OR SHORT-CIRCUIT IT ONLY USE BATTERIES* SUPPLIED BY JRI (REF : 11596)

*Recommended battery: Saft LS14500 type AA 3.6V 2250mAh VII. CHARACTERISTICS LoRa SPY T0 - Temperature (internal probe) HIM Communication Memory Sensor Operating range Measurement range

: 1 LED RGB + 1 touch-sensitive button

: LoRa 868MHz or 915MHz*

: 10 000 time-stamped measurements

: PT100 sensitive element inside unit

: -35+85C

: -35+85C Accuracy, standard version

: 0.5C from -20C to +30C / 0.8C outside this range Resolution

: 0.01 IP rating Frequency of recording and transmission

: IP 68

: adjustable from 1min to 24h Frequency of measurement

: 1 or 5 min Response time Power source Case Dimensions Weight LoRa SPY T1 - Temperature (internal probe) HIM Communication Memory Sensors Operating range Measurement range Accuracy, standard version Resolution IP rating Frequency of recording and transmission Frequency of measurement Response time Power source Case Dimensions Weight

: ~ 15 min. to 90% of the variation

: 3,6V Lithium battery 2 to 4 years autonomy depending on use

: Polycarbonate Food safe Without magnets

: 87 mm x 64 mm x 25 mm

: ~ 100g

: 1 LED RGB + 1 touch-sensitive button + 1 LED Display

: LoRa 868MHz or 915MHz*

: 10 000 time-stamped measurements

: PT100 sensitive element inside unit Light presence sensor

: -30+70C

: -30+70C

: 0.4C from -20C to +40C / 0.5C outside this range

: 0.01

: IP 68

: adjustable from 1min to 24h (15 min in standard use)

: 1 or 5 min

: ~ 15 min. to 90% of the variation

: 3,6V Lithium battery 2 to 4 years autonomy depending on use

: Polycarbonate Food safe

: 87 mm x 64 mm x 25 mm

: ~ 100g JRI 7 LoRa SPY TH1 - Thermo-Hygro Internal HIM Communication Memory Sensor Operating range Measurement range Accuracy, standard version Temperature Humidity at T between 15 and 25C Resolution IP rating Frequency of recording and transmission Frequency of measurement Response time Power source LoRa SPY N Digital Case Dimensions Weight HIM Communication Memory Sensor Operating range

: 1 RGB LED + 1 touch-sensitive button + 1 LCD display

: LoRa 868MHz or 915MHz*

: 10 000 time-stamped measurements

: Inside control unit

: -30+70C

: -30+70C and 0 100% RH

: 0.4C from -20 C to +40C / 0.5C outside this range 2% HR from 20% to 80%

4% HR from 0 to 20% and 80% to 100%

: 0.01

: IP 40

: adjustable from 1 min to 24h (15 min in standard use)

: 1 or 5 min

: ~ 5 min. to 90% of the variation

: 3,6V Lithium battery 2 to 4 years autonomy depending on use

: Polycarbonate Food safe

: 87 mm x 64 mm x 25 mm

: ~ 100g

: 1 RGB LED + 1 touch-sensitive button + 1 LCD display

: LoRa 868MHz or 915MHz*

: 10 000 time-stamped measurements

: External to control unit

: -30+70C Measurement range Accuracy, standard version

: according to the type of JRI digital probe

: Accuracy of the JRI digital probes Resolution

: 0.01 IP rating Frequency of recording and transmission

: IP 40

: adjustable from 1min to 24h (5min in standard use) Frequency of measurement

: 1 or 5 min Response time Power source Case Dimensions Weight LoRa SPY TH3 Precision Thermo-Hygro HIM Communication Memory Sensor Standard Industrial Operating range Probe measuring range Probe accuracy at 230,5C Standard Industrial

: Depending of the digital probe used

: 3,6V Lithium battery 2 to 4 years autonomy depending on use

: Polycarbonate Food safe

: 87 mm x 64 mm x 25 mm

: ~ 100g

: 1 RGB LED + 1 touch-sensitive button + 1 LCD display

: LoRa 868MHz or 915MHz*

: 10 000 time-stamped measurements

: External to control unit

: -30 +70C

: -40 +60C and 0-100%HR

: -100 +200C configurable and 0-100%HR Temperature : 0,1C / Humidity : 0,8%RH Temperature : 0,2C / Humidity : 0,8%RH Resolution

: 0.01 IP rating Frequency of recording and transmission

: IP 40

: adjustable from 1min to 24h (5min in standard use) JRI 8 Frequency of measurement

: 1 or 5min Response time Power source Case Dimensions Weight LoRa SPY T2 Standard remote temperature HIM Communication Memory Sensor Operating range Measurement range

: ~ 2 min. to 90% of the variation

: 3,6V Lithium battery 2 to 4 years autonomy depending on use

: Polycarbonate Food safe

: 87 mm x 64 mm x 25 mm

: ~ 100g

: 1 RGB LED + 1 touch-sensitive button + 1 LCD display

: LoRa 868MHz or 915MHz*

: 10 000 time-stamped measurements

: PT100 external probe, non disconnectable, flat cable

: from -30 to +70C and 10 to 90%HR

: - 50 +105C Accuracy, standard version

: 0.3C from -20 to 30C / 0.5C outside this range Accuracy, incubator version

: 0.2C de +30 +50C/ 0.5C outside this range IP rating Cable length

: IP 67

: 30 cm, 3 m PT100 probe resolution Frequency of recording and transmission

: 0.01

: adjustable from 1 to 24h Frequency of measurement

: 1 or 5min Response time Power source Case Dimensions Weight LoRa SPY T3 - Basse Temprature HIM Communication Memory Sensor Operating range Measurement range

: ~ 2 min. to 90% of the variation

: 3,6V Lithium battery 2 to 4 years autonomy depending on use

: Polycarbonate Food safe

: 87 mm x 64 mm x 25 mm

: ~ 100g (without probe)

: 1 RGB LED + 1 touch-sensitive button + 1 LCD display

: LoRa 868MHz or 915MHz

: 10 000 time-stamped measurements

: External PT100 non disconnectable 2,9mm

: -20 to 50C

: -200 to +0C Accuracy, standard version

: 0.2C from 0C to -20C and 0.5C outside this range Accuracy, incubator version IP rating Cable length Frequency of recording and transmission

: 0.01

: IP 65

: 50 cm and 3 m

: adjustable from 5 to 24h Frequency of measurement

: 1 or 5min Response time Power source Case Dimensions Weight JRI

: ~ 2 min. to 90% of the variation

: 3,6V Lithium battery 2 to 4 years autonomy depending on use

: Polycarbonate Food safe

: 87 mm x 64 mm x 25 mm

: ~ 100g (without probe) 9 LoRa SPY T4 Hygitherm (Calibrated for Hot Water Network) HIM Communication Memory

: 1 RGB LED + 1 touch-sensitive button + 1 LCD display

: LoRa 868MHz or 915MHz

: 10 000 time-stamped measurements Sensor (with overmoulded support)

: PT100 non disconnectable Operating range Measurement range Accuracy @55C Resolution IP rating Cable length Frequency of recording and transmission

: -30 to +70C

: -40 to +85C

: 0.3C on copper tube network 0.5C on HTA tube network

: 0.01

: IP 65

: 2m

: from 1 min to 24h Frequency of measurement

: 1 ou 5 min A reflector to isolate the sensor ambient conditions is available as an option from Response time Power source Case Dimensions Weight LoRa SPY U - Universel HIM Communication Memory Input type :

PT100 input measurement range:

resolution:

accuracy (not including probe) :

Current input measurement range:

resolution:

accuracy (control unit only):

Voltage input measurement range:

resolution:

accuracy (control unit only) On/Off or Count input Type of input measurement range:

resolution:

accuracy Operating range Resolution IP rating Frequency of recording and transmission

: <2min. 90% de la variation

: Lithium battery 3,6v 2 to 4 years life duration depending on use

: Polycarbonate food

: 87 mm x 63 mm x 25 mm

: ~ 100g (excluding probe and wire)

: 1 RGB LED + 1 touch-sensitive button + 1 LCD display

: LoRa 868MHz or 915MHz*

: 10 000 time-stamped measurements

-200C to +300C (*) 0,01C 0,2C from -20C to +50C 0,3C from -80C to -20C and from +50C to +140C 0,5C beyond these ranges 0 to 20 mA or 4-20mA 0,001 mA 0,01 mA 0 1V 0,1 mV 0.5 mV Dry contact or 0-3,3V max 0 65535 signal from 0 to 200Hz 1 1

: 0 to 50C

: 0.01

: IP 34

: adjustable from 1min to 24h Frequency of measurement

: 1 or 5min in standard using MySirius) Response time Power source Case Dimensions Weight

: Depending of the probe used

: 3,6V Lithium battery 2 to 4 years autonomy depending on use

: Polycarbonate Food safe

: 87 mm x 64 mm x 25 mm

: ~ 100g (without probe) JRI 10

*2018 4th trimestrial. a) Compliance All our products are in compliance with the following standards:

EN 12830 CE ERM VIII. MAINTENANCE Yes for T0, T1 and T2 models: these devices must be verified regularly according to EN 13486 (recommendation is once per year) EN 301 489 / EN 61000 / EN 61010 / EN 55022 / EN 300 220 Clean the device with a soft cloth, either dry or slightly moistened with water. To remove stubborn dust, use a cloth soaked in a diluted, non-abrasive detergent. Then wipe carefully with a soft dry cloth. Never use benzene, thinner, alcohol or any type of solvent, which can cause discoloration or deformation of the surfaces. JRI 11 IX. SUITABILITIES FOR USE (LORA SPY T0-T1-T2-T3) JRI 12 JRI 13 JRI 14 JRI 15 X. GUARANTEE Our material is guaranteed for one year, parts and labor, against any manufacturing defect, functional failure or abnormal wear. This guarantee covers only the replacement of parts recognized to be defective as well as the repair of the material in question returned shipping paid to our workshops, and excludes all damages and interest or incidental expenses. The starting point of the guarantee is the date of invoice of the concerned product. The invoice must be provided for any request for application of the guarantee. Repairs under guarantee in no way extend the guarantee period accorded to the product at the time of sale. Deterioration due to any abnormal usage or to storage under adverse environmental conditions is excluded from our guarantee. XI. MAINTENANCE CONTRACT How best to optimize your radiofrequency installation?

Radiofrequency measurement systems communicate through Hertzian waves. Many factors (change in installation, moving, supplemental wall, interference with another radio system) can nonetheless modify the radio pathway previously defined. The use of radiofrequency thus requires periodic monitoring by recognized specialists. It is for this reason that JRI has developed for you the maintenance contract. We simplify your procedures by offering you a fully-integrated solution. This global service offer includes both maintenance and a metrological service, ensuring the optimum functioning of your devices or of your installation. You'll no longer have to worry about the maintenance of your devices!

This maintenance contract allows you to benefit, for a minimum period of 2 years, from a variety of services such as:

- annual or biannual verification of the material

- an extension of the guarantee

- telemaintenance

- telephone assistance +33 (0) 892 680 933 (0,282 HT/min)

- replacement of the material onsite or by a return to the factory

- verification of measurement accuracy (metrological certificate)

- battery replacement

- access to new software versions

- intervention within 48 working hours following identification of the fault by our experts XII. ENVIRONMENTAL PROTECTION JRI recommends to its customers the disposal of their unusable and/or irreparable measurement and recording materials in a manner compatible with the protection of the environment. As the production of waste materials cannot be avoided, these should be reused through the recycling process best adapted to the considered materials and to the protection of the environment. RoHS Directive The RoHS European directive regulates and limits the presence of dangerous substances in electronic and electric equipment (EEE). All new electronic equipment designed, developed and manufactured by JRI are in compliance with the aforementioned Directive 2002/95/CE. JRI 16