FCC ID: W4512484 LORA TEMP

LoRa TEMP USER GUIDE Ref : 12628 0 2 0 2 y r a u n a J TABLE OF CONTENTS I. INTRODUCTION ..................................................................................................................................... 3 Box contents .............................................................................................................................................................. 3 Symbols ...................................................................................................................................................................... 3 II. INSTALLATION RECOMMANDATIONS ..................................................................................................... 4 Sources of disturbances or attenuation .................................................................................................................... 4 Positioning ................................................................................................................................................................. 4 III. PRESENTATION ..................................................................................................................................... 5 a) Case ............................................................................................................................................................................ 5 b) Mounting ................................................................................................................................................................... 5 IV. USE ..................................................................................................................................................... 6 a) Device activation ....................................................................................................................................................... 6 Turning off the device ................................................................................................................................................ 6 LED functionality ........................................................................................................................................................ 6 V. BATTERY REPLACEMENT ...................................................................................................................... 7 Removal of the battery .............................................................................................................................................. 7 Installation of the new battery .................................................................................................................................. 7 a) b) a) b) b) c) a) b) VI. CHARACRERISTICS ................................................................................................................................. 8 a) Compliance ................................................................................................................................................................ 8 VII. CLEANING ............................................................................................................................................ 9 VIII. GUARANTEE .......................................................................................................................................... 9 IX. MAINTENANCE CONTRACT ...................................................................................................................... 9 ENVIRONMENTAL PROTECTION .......................................................................................................... 10 X. JRI 2 I. INTRODUCTION The LoRa TEMP is a temperature indicator measuring temperature and transmitting data wirelessly to a web platform using the LoRa long-distance network. The LoRa TEMP complies with the ISO EN 13485 standard a) Box contents 1 LoRa TEMP 1 battery 1 wall mounting device 1 user guide b) Symbols RECYCLING: electrical items should be disposed of separately from household waste. For more information on collection, re-use and recycling schemes, contact your local waste service authorities. Power source: the LoRa TEMP is powered by a type A lithium battery ( ch. V). CE LABELING: this device is certified to comply with European regulations for electrical safety, flammability, disruptive electromagnetic emissions, and immunity to environmental electrical disturbances. Redirect to JRI MySirius home page FCC ID: W4512484 Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .This equipment should be installed and operated with minimum distance 20cm between the radiator your body.

Do not use the device under conditions other than those described in the technical characteristics Risk of fire or explosion in case of improper use:

- Recharging of the battery

- Short circuiting of the battery If the device is used in a manner not specified by the manufacturer, the protection provided by the device may be compromised. JRI 3 II. INSTALLATION RECOMMANDATIONS The LoRa TEMP is a temperature indicator communicating in radio frequency with software hosted on a web platform via the public LoRa long distance network or via a private gateway. To ensure optimal radio transmission, a number of recommendations must be observed, since any wireless transmission is subject to interference a) Sources of disturbances or attenuation The presence of obstacles in the wave path around the LoRa TEMP or between the LoRa TEMP and the Gateway (wall, furniture, people) or near the antenna. The thickness of an obstacle in the wave path. The attenuation is greater diagonally than perpendicularly A solid metal wall will not allow transmission by radio. A perforated metal wall will allow waves to pass while attenuating them. b) Positioning or any nearby persons. The LoRaTEMP can be placed inside or outside the monitored unit at a least 20 cm from the user For installations outside the monitored unit, put the device sufficiently high on the wall to avoid interference with obstacles and people passing by. The LoRa TEMP uses the LoRa public network. Never place the LoRa TEMP horizontally. To ensure your safety during installation or an intervention on a device placed in a high position, use proper equipment which is in good condition and provides adequate stability. Wear appropriate, non-slip shoes and install warning signs around the work area if the intervention takes place in a high traffic area. JRI 4 III. PRESENTATION a) Case Eyelet Bar code, serial number, CE and FCC labels Back panel:

Battery cover ON/OFF button b) Mounting The LoRa TEMP can be mounted in two different ways:

Via the eyelet:

Via the supplied wall-mount bracket Use a string to attach the device to the unit being monitored Install the wall-mount bracket using screws White status LED eyelet JRI 5 IV. USE When you receive the LoRa TEMP it is turned off: it can neither send nor receive data. a) Device activation To activate the LoRa TEMP press and hold the On/Off button for more than 3 seconds. Once the device has been activated it starts measuring and transmitting data to MySirius at the set intervals. Note: The LED lights up when the minimum press time is reached, allowing you to know when to release the On/Off button.

>3 b) Turning off the device To turn off the LoRa TEMP, press and hold the On/Off button for approximately 3 to 6 seconds. Note: a user configurable parameter on MySirius makes it possible to prevent an unwanted deactivation if the on/off button is pressed accidentally.

>3s <6s c) LED functionality OFF Stopping DEVICE STATUS LED BEHAVIOUR No light ON (connected to MySirius) 1 fast blink (10ms) every 5 seconds Steady light on for 3 seconds when the action has been taken into account Activation and connection with JRI MySirius in progress 1 fast blink every 1 second. No network/gateway connection No light (indcator off) Technical default Threshold alarm 2 fast blinks (10 ms) every 5 seconds

(the blinking stops when the problem has been corrected) FSK mode (factory network) 1 slow blink (100 ms) every 5 sec. JRI 6 V. BATTERY REPLACEMENT a) Removal of the battery Lift the back panel off Remove the grid Take the battery out of its compartment. b) Installation of the new battery Insert the new battery into the battery compartment and make sure that it is properly aligned. Put the grid back Put the back panel back Battery detection is confirmed by the activation of the LED for a couple of seconds. The device can be switched on when the LED stops flashing. KEEP THE BATTERY AWAY FROM FIRE, DO NOT ATTEMPT TO RECHARGE OR SHORT CIRCUIT IT Recommended battery : LS14500 type AA 3.6V 2600 mAh or LS17500 3.6V 3600 mAh JRI 7 VI. CHARACRERISTICS LoRa TEMP - (internal probe) HMI Communication Memory Sensor Operating range Measurement range Storage temperature Accuracy Resolution IP rating Shock rating Recording and transmission interval Measurement interval Response time Power Source

: 1 white LED + 1 push button

CE frequency: 867.1-867.9MHz, 868.1-868.5MHz FCC frequency: 902.3-914.9 MHz, 903~914.2 MHz

: 100 time-stamped measurements

: Internal Cl A PT100 sensor

: -30+70C

: -30+70C

: -40+85C

: 0.5C from 0C to +25C / 1C from -20C to 0C and from +25C to +70C / 2C from -30C to -20C

: 0.01 C

: IP65 with condensation resistance

: IK05

: adjustable from 5 min to 24h

: adjustable from 5 min to 24h

: ~ 10 min

: Lithium battery type A (14 or 17 mm in diameter)

- Battery life ( 14 mm ): 5 years with the following uage profile:

Fixed measurement interval : 10mn Recording Interval: 120 mn Transmission interval: 6 hours

- Battery life (17 mm ): 7 years with the following uage profile:

Fixed measurement interval : 10mn Recording Interval: 120 mn Transmission interval: 6 hours

: White ABS Food contact safe

: 65 mm x 65 mm x 28 mm

: ~ 100 gr Case Dimensions Weight a) Compliance CE Marking RED Directive 2014/53/EU Radio 868: ETSI EN 300 220-1 V3.1.1 (2017-02), ETSI EN 300 220-2 V3.2.1 (2018-06) Audio/video, information and communication technology equipment:

EN62368-1:2014+A11:2017 EMC: ETSI EN 301 489-1 V2.2.3 (2019-11) /ETSI EN 301 489-3 V2.1.1 (2019-03) FCC: 15C 470 Mhz : CCC Reach ROHS NF EN 13485 Classe 1 Lora WAN Certification JRI 8 VII. CLEANING Clean the device with a soft, dry or sligthly damp cloth. To remove stubborn stains, use a cloth soaked with a mild non-abrasive detergent solution, then wipe the surface with a soft, dry cloth. Don't use benzene, thinners, alcohol or other types of solvents which might damage the finish. VIII. GUARANTEE Our products carry a one-year guarantee against manufacturing defects, malfunction, or abnormal wear. This guarantee does not cover damage caused by accidental misuse, incorrect use of the product, abnormal storage conditions, neglect in product use, or modification of hardware/software not carried out by JRI. This guarantee is limited to the sole replacement of the defective parts and the repair of the involved instrumnets, returned carriage paid to our factory, and excludes any damage or ancillary costs. The guarantee starts from the date of the invoicing of the concerned product. For any guarantee application request, the purchase invoice should be produced. Under-guarantee repairs do not extend the guarantee limit granted at the sale of the product. IX. MAINTENANCE CONTRACT How best to optimize your radiofrequency installation?

Radiofrequency measurement systems communicate through Hertzian waves. Many factors (change in installation, moving, supplemental wall, interference with another radio system) can nonetheless modify the radio pathway previously defined. The use of radiofrequency thus requires periodic monitoring by recognized specialists. It is for this reason that JRI has developed for you the maintenance contract. We simplify your procedures by offering you a fully integrated solution. This global service offer includes both maintenance and metrological services, ensuring optimum function of your devices or of your installation. You'll no longer have to worry about the maintenance of your devices!

This maintenance contract allows you to benefit, for a minimum period of 2 years, from a variety of services such as:

- annual or biannual verification of the material

- an extension of the guarantee

- telemaintenance

- telephone assistance +33 (0) 892 680 933 (0,282 /min)

- replacement of the material onsite or by a return-to-factory

- verification of measurement accuracy (metrological certificate)

- battery replacement

- access to new software versions

- intervention within 48 working hours following the identification of the fault by our experts JRI 9 X. ENVIRONMENTAL PROTECTION JRI recommends to dispose unusable and/or irreparable measurement and recording materials in a manner compatible with the protection of the environment. As the production of waste materials cannot be avoided, these should be reused through the recycling process best adapted to the concerned materials and to the protection of the environment. RoHS Directive The RoHS European directive regulates and limits the presence of dangerous substances in electronic and electric equipments (EEE). All new electronic equipments designed, developed and manufactured by JRI are in compliance with the aforementioned Directive 2002/95/CE. 867.1-867.9MHz, 868.1-868.5MHz:

Maximum Transmit Power is 11.32dBm. JRI 10

EXHIBIT A - FCC ID LABEL AND LOCATION FCC ID Label FCC ID Label Location Information The label shown shall be permanently affixed at a conspicuous location on the device and be readily visible to the user at the time purchase (Labeling requirements per 2.925)

JRI Address: 16, rue louis rameau Bezons,France Email: bruno.peyrichou@group-mms.com Tel: +33139963300 Fax: +33139963333 Date: 2020/04/21 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To whom it may concern:

The RF chip, model SX1276, which installed in our product LORA TEMP, Model:

12484, FCC ID: W4512484, supports frequency range of 137-1020MHz and modulations of FSK, GFSK, MSK, GMSK, LoRa and OOK. For use in America and this chip only support 902-928MHz and LoRa. The other bands and modulations was disabled by the manufacturer in the software. The end user has no capability to activate it. Sincerely Yours, Signature:

Pascal Vermeersch CEO

JRI 16, rue louis rameau Bezons,France Tel: +33139963300 Fax: +33139963333 Email: bruno.peyrichou@group-mms.com Date: 2020-2-24 FCC Authorization FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization To whom it may concern:

21 U.S.C. 862. Sincerely Yours, Signature:

Pascal Vermeersch CEO We JRI, the undersigned, hereby authorizes Bay Area Compliance Laboratories Corporation to act on its behalf in all matters relating to application for Equipment authorization, including the signing of all documents relating to these matters. All acts carried out by Bay Area Compliance Laboratories Corporation on our behalf shall have the same effect as our own action. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, This authorization is valid until further written notice from the applicant. QA-FR-170-B 7/29/2014

JRI 16, rue louis rameau Bezons,France Tel: +33139963300 Fax: +33139963333 Email: bruno.peyrichou@group-mms.com FCC Confidential Authorization Date: 2020-2-24 FEDERAL COMMUNICATIONS COMMISSIONS Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request regarding application for certification of FCC ID: W4512484 In accordance with Sections 0.457 and 0.459 of the Commissions Rules, JRI hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Block Diagram Schematics Operation Description The above materials contain proprietary and confidential information not customarily released to the public. The public disclosure of these materials provides unjustified benefits to its competitors in the market. Sincerely Yours, Signature:

Pascal Vermeersch CEO