EN by Blum by Blum SERVO-DRIVE Instruction leaflet www.blum.com Table of contents About these instructions .......................................................................................................................... 2 Warning signs and danger symbols .......................................................................................................... 3 Safety ........................................................................................................................................................ 3 Disposal ................................................................................................................................................... 12 Orientation diagram: SERVO-DRIVE for AVENTOS/SERVO-DRIVE uno for AVENTOS ...................... 14 Orientation diagram: SERVO-DRIVE for LEGRABOX/TANDEMBOX/MOVENTO/TANDEM ............... 14 Orientation diagram: SERVO-DRIVE flex for refrigerators, freezers and dishwashers......................... 15 How to operate: SERVO-DRIVE for AVENTOS/SERVO-DRIVE uno for AVENTOS ............................. 16 How to operate: SERVO-DRIVE for LEGRABOX/TANDEMBOX/MOVENTO/TANDEM ...................... 20 How to operate: SERVO-DRIVE flex for refrigerators, freezers and dishwashers ............................... 22 Troubleshooting: SERVO-DRIVE for AVENTOS/SERVO-DRIVE uno for AVENTOS ........................... 24 Troubleshooting: SERVO-DRIVE for LEGRABOX/TANDEMBOX/MOVENTO/TANDEM ..................... 25 Troubleshooting: SERVO-DRIVE flex .................................................................................................... 26 Technical data ........................................................................................................................................ 28 Simplified EU Declaration of Conformaty Julius Blum GmbH ........................................................... 30 Spare parts form .................................................................................................................................... 31 About these instructions Thank you for your purchase. SERVO-DRIVE, the electrical motion support system from Julius Blum GmbH, is a high-quality product that simplifies everyday kitchen tasks. To safely enjoy the comfort of SERVO-DRIVE, please note the following:
Carefully read the instruction leaflet before use. Please retain the instruction leaflet for the service life of SERVO-DRIVE. Please pass on this instruction leaflet to each subsequent owner or user of SERVO-DRIVE. Instructions are also available on our website. Please search on www.blum.com for
"SERVO-DRIVE instruction leaflet" and download it as a PDF file. Validity and target group This instruction leaflet is intended for all users of SERVO-DRIVE. Assembly, adjustment, initial operation, maintenance and removal may only be carried out by qualified personnel according to the separate installation instructions. 2 EN Warning signs and danger symbols WARNING WARNING indicates a danger that could lead to death or serious injury if not heeded. NOTE NOTE indicates information that should be followed. Safety Principle SERVO-DRIVE complies with current safety standards. Neverthe-
less, certain risk factors will remain if the information contained in this instruction leaflet is not observed. Please be aware that Julius Blum GmbH is not responsible for incidental or consequential damages that may arise due to non-compliance with this instruction leaflet. Safety information The mains plug and the Blum transformer must be easily accessible. Neither the Blum transformer nor any cabling should come into con-
tact with moving parts. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capa-
bilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision. Touching the area around the lift system lever during the opening and closing motion can cause injury. The Blum transformer (Z10NE030) must be connected to an outlet with an earth connection. 3 Intended use SERVO-DRIVE supports the opening and closing of lift systems, the opening of drawers and/or refrigerators and freezers or dishwashers, and may only be used under the following conditions:
in dry, enclosed rooms in combination with AVENTOS lift systems and/or pull-out systems from Julius Blum GmbH within permitted technical specifications in combination with a Blum transformer. Technical data specifications can be found in the Blum sales docu-
mentation. For more information, please see your distributor. Julius Blum GmbH is not liable for any other use. 4 Structural changes and spare parts EN Structural changes and replacement parts not approved by the manu-
facturer affect the safety and functionality of SERVO-DRIVE and are, therefore, not allowed. Only use original spare parts from Julius Blum GmbH. Blum components are the only devices that should be connected to the Blum transformer. Only qualified persons may install or replace Blum components, modify the position of the Blum transformer or modify the cabling. Please make sure that the Blum distance bumper is attached to the front. NOTE To ensure that lift systems, drawers, refrigerators or freezers and dishwashers, cannot be activated unintentionally, we recommend con-
necting the Blum transformer to a switched outlet. For more informa-
tion, please consult an electronics retailer. 5 Children WARNING Opening and closing lift systems may pose a risk of injury to children. Persons, especially children, who are sitting or standing on work surfaces may be pushed from work surfaces or injured when opening and closing a lift system. May pose a choking hazard to children when playing with the SERVO-DRIVE switch. Children could choke on the SERVO-DRIVE switch battery. Make sure that children do not open the SERVO-DRIVE switch as they could choke on parts or the battery from the SERVO-DRIVE switch if they swallow them. Opening drawers may pose a risk of injury to children!
Children should be properly supervised when in the room so that they do not play with the lift system. To ensure that SERVO-DRIVE is not triggered unintentionally, the switched outlet should be turned off. 6 EN Cabinet care and cleaning WARNING Danger of death from electric shock!
There is a danger of electric shock if fluids penetrate the Blum transformer. Before cleaning the front, turn off the switched outlet to which the Blum transformer is connected. Before cleaning the drive unit and/or Blum transformer, disconnect the Blum transformer from the power. Make sure that no water or aggressive cleaning material comes into contact with the drive unit, the Blum transformer or the SERVO-DRIVE switch use a moist cloth. Never open a Blum transformer, drive unit or SERVO-DRIVE switch. Any cabling damage should be immediately corrected by a quali-
fied specialist. Do not cover the Blum transformer with towels or other items danger of overheating. WARNING Danger of injury if the lever springs upward!
There is a danger of injury from the lever springing upwards during improper removal of the front including fittings. Never remove the front for cleaning. Front removal may only be carried out by qualified personnel according to the separate installation instruc-
tions. 7 8 EN 9 10 EN 11 Electrical and electronic appliances must not be disposed of with household waste at the end of their service life. Ask your local authority for information on how to proceed. Blum electrical and electronic appliances meet the requirements of the WEEE Directive 2012/19/EU. Electrical and electronic appliances are collected separately, which enables old appli-
ances to reused or recycled, and their materials to be reused. This is intended to prevent any hazar-
dous materials that may be contained in the appliances from damaging the environment and health during disposal. In most cases, the entire appliance does not need to be disposed of according to the WEEE guidelines, but only the part that is equipped with electrical components. Please refer to the disassembly instructions for information on this. There are free collection points for returning electrical and electronic appliances in your area. You will find further information on this under the following link:
www.blum.com/recycling Batteries must not be disposed of with household waste at the end of their service life. Ask your local authority for information on how to proceed. Batteries used at Blum meet the requirements of the Battery Directive 2006/66/EC. Batteries are collected separately, which enables the batteries or their materials to be recycled. This is intended to prevent any hazardous materials that may be contained in the appliances from damaging the environment and health during disposal. Please refer to the disas-
sembly instructions for information on removing batteries. There are free collection points for returning batteries in your area. Please avoid shorting the contact surfaces when disposing of batteries. 12 EN 13 SERVO-DRIVE for AVENTOS/SERVO-DRIVE uno for AVENTOS SERVO-DRIVE for AVENTOS supports the opening and closing of lift systems in furniture. Orientation diagram 1 3a 3b 2 5 4 1 2 3a 3b 4 5 6 7 Lift mechanism, drive unit and cover cap Lever Blum transformer, 24 Watts Blum plug-in transformer, 12 Watts SERVO-DRIVE switch Blum distance bumper Cabinet Front/Lift system 7 6 SERVO-DRIVE for LEGRABOX/TANDEMBOX/MOVENTO/
TANDEM SERVO-DRIVE supports the opening of drawers. Orientation diagram 1 2 3 4 Drive unit Eject lever Blum transformer Blum distance bumper 4 3 1 2 14 EN SERVO-DRIVE flex for refrigerators and freezers SERVO-DRIVE flex allows handle-less refrigerators and freezers to be opened electromechanically by pressing the front. Orientation diagram 1 3 6 8 2 5 4 7 1 2 3 4 5 6 7 8 Drive unit Catch plate Mounting plate Front fixing Blum distance bumper Assembly jig Front cover Chipboard screws SERVO-DRIVE flex for dishwashers SERVO-DRIVE flex allows handle-less dishwashers to be opened electromechanically by pressing the front. Orientation diagram 1 3 5 7 1 2 3 4 5 6 7 Drive unit Catch plate Mounting plate Front fixing Assembly jig Front cover Chipboard screws 4 6 2 15 SERVO-DRIVE for AVENTOS/SERVO-DRIVE uno for AVENTOS Electrical motion support system The SERVO-DRIVE switch triggers the automatic opening and closing action of SERVO-DRIVE for AVENTOS. Press on the front The lift system opens automatically Press on the SERVO-DRIVE switch The lift system closes automatically 16 EN Manual operation The lift system can be opened or closed manually at any time without damaging SERVO-DRIVE for AVENTOS. Collision detection Leaning protection Manual opening of the lift system by moving it upwards Manual closing of the lift system by moving it downwards The opening and closing action is inter-
rupted automatically via the integrated collision detection feature when the front hits a body part or other object. SERVO-DRIVE for AVENTOS is only trig-
gered by a brief touch. Leaning on the lift system will not open it. 17 Power failure If the power supply is interrupted during the opening or closing process, the SERVO-DRIVE for AVENTOS lift system will remain in that position. The front can be closed manually, or when power is The following parameters must be observed to ensure the error-free functioning of SERVO-DRIVE for AVENTOS:
Blum distance bumpers must be attached to the front to maintain the required distance between the lift system and the cabinet. No items should be placed between the front and the cabinet. NOTE Improper use may cause SERVO-DRIVE for AVENTOS to wear prematurely!
Do not press or pull with force against the movement direction when opening or closing the lift system. Never remove the front. Front removal may only be carried out by qualified personnel. See also the safety section at the first pages of this leaflet. SERVO-DRIVE switch The SERVO-DRIVE switch is battery-operated (CR2032). Only use batteries from reputable manufacturers. A B 18 1 Battery display (LED) 1 2 Battery display (LED) Connect (LED) 1 1 2 Replacing the battery When the battery power begins to weaken, the battery display (LED) will begin to flash red. EN A B 1 2 3 1 2 1 2 3 4 4 1 2 3 4 1 2 3 4 Open the SERVO-DRIVE switch and remove the battery holder Remove the battery Insert new battery (type CR2032), ob-
serving the correct pole connections Close battery holder Open the SERVO-DRIVE switch and remove the battery holder Remove the battery Insert new battery (type CR2032), ob-
serving the correct pole connections Close battery holder If the battery is inserted incorrectly, the SERVO-DRIVE switch battery display will flash red. NOTE The SERVO-DRIVE switch battery must not be recharged or discarded into fire. 19 SERVO-DRIVE for LEGRABOX/TANDEMBOX/MOVENTO/
TANDEM Electrical motion support system When the front and/or handle of the drawer
(A) is pulled or pressed, the eject lever of the drive unit (B) swivels forward and opens the pull-out unit a short distance. The electrical opening support function is only triggered by a brief touch or pull. Leaning on the pull-out unit, for example, will not open it. Leaning protection 20 The following parameters must be observed to ensure the error-free functioning of SERVO-DRIVE:
EN Blum distance bumpers must be attached to the front to ensure the required trigge-
ring signal (2 mm) between the pull-out unit and the cabinet. No items can be clamped between the pull-out unit and the cabinet back and/or SERVO-DRIVE. Blum transformers Blum transformers provide power to the drive unit. Blum transformer function can be checked via the operating mode display (LED). 2 1 3 1 2 3 Power connection Operating mode display
(LED) Serial tag 3 2 NOTE Improper use may cause SERVO-DRIVE for pull-out systems to wear prematurely!
Do not press or pull with force against the movement direction when opening or closing the drawer. 21 SERVO-DRIVE flex Electrical motion support system Pressing the handle-less front will trigger the electromechanical opening of the SERVO-DRIVE flex. 1) Press (do not pull) the front The door (refrigerator or dishwasher) will open slightly for 2.5 sec 1 2) User grips door using slight opening Continues opening process 2b) User does not touch door Door closes again
< 3 s 2a
> 3 s 2b 2 2b 2a
< 3 s
> 3 s 22 EN 23 Problems Battery display on SERVO-DRIVE switch flashes red. Possible cause SERVO-DRIVE switch battery is losing power. Remedy Replace the battery. Battery display lights up red Battery has been inserted incorrectly. Insert the battery correctly. SERVO-DRIVE for AVENTOS does not open or close com-
pletely. The front is not balanced or does not lie flat on the cabinet evenly. Contact your distributor's customer service to readjust the front. SERVO-DRIVE for AVENTOS does not work on one particu-
lar lift system when pressing on the front or using the SERVO-DRIVE switch. SERVO-DRIVE switch battery has run out of power. Replace the battery. Battery was inserted incor-
rectly. SERVO-DRIVE switch is defective. Drive unit is defective. Cabling is defective. Insert the battery correctly. Contact your distributor's customer service to replace the SERVO-DRIVE switch. Contact your distributor's customer service to replace the drive unit. Contact your dealer's custo-
mer service to correct the problem. Remove the obstruction. SERVO-DRIVE for AVENTOS does not close completely. An object is between the lift system and cabinet or jammed between the lever and front. An object juts out over the front edge of the cabinet. Remove the obstruction. Lift mechanism adjustment display lights up. The front is not balanced.
[OK] button of drive unit lights up red continuously 24 Drive unit is defective Replace drive unit Problems SERVO-DRIVE for LEGRABOX/TANDEMBOX/
MOVENTO/TANDEM will not work on any drawers when pushing or pulling. EN Possible cause The Blum transformer is not connected to the power outlet. Remedy Plug in the Blum transformer to the outlet. The power supply has been interrupted. Blum transformer is defective. Check the circuit breaker/
fuse box. If necessary, contact an authorised electrician. If necessary, have the distributor's customer service replace the Blum transformer. Contact your dealer's custo-
mer service to correct the problem. Cabling is defective. SERVO-DRIVE for LEGRABOX/
TANDEMBOX/MOVENTO/TAN-
DEM will not work for an entire cabinet when pushing or pulling. SERVO-DRIVE for LEGRABOX/TANDEMBOX/
MOVENTO/TANDEM will only work when drawer is pulled not by pushing. SERVO-DRIVE for LEGRABOX/TANDEMBOX/
MOVENTO/TANDEM does not work for an individual pull-
out unit neither pulling nor pushing. Object is obstructing path. Remove the obstruction. Blum distance bumper was removed or is defective. Max. fill height of drawer has been exceeded. SERVO-DRIVE is defective. Contact your dealer's custo-
mer service to replace the Blum distance bumper. Open the drawer manually. Remove the items that are too high from the pull-out unit. Contact your distributor's customer service to replace the drive unit. 25 Remedy Wait for the pressure to neutralise (this may take up to 20 sec). Possible cause If the door of the device is left open for a relatively long time, for example when putting away shopping, a vacuum may be created inside the refrigerator or freezer after it has been closed. This may result in it not being possible to open the door of the device for a few seconds. Mounting plate has been instal-
led too far back Check position using as-
sembly template Blum distance bumper pad not inserted or positioned incorrectly Front gap too small Front gap too large Ensure dimensions corre-
spond to assembly instructions Install Blum distance bumper pad Correct positioning Adjust front gap to 2.53 mm (in accordance with instructions for white goods) Trigger fails to initiate move-
ment across entire front height Wireless switches are recommended Incorrect drilling cover (blocked rod) Drill a new front Refrigerator assembly stops have not been removed Remove in accordance with white goods instructions The reference run has not been carried out correctly (e.g. due to manual interference during the reference run). Reset system, begin a new reference run Problems The refrigerator door does not open. SERVO-DRIVE flex for refrigerators, freezers and dishwashers:
Unit does not respond to activation Unit responds slowly to activation Unit does not open fully 26 EN Problems Door does not close Possible cause Catch plate is not installed Remedy Install catch plate Catch plate is positioned incor-
rectly Reposition the catch plate Dishwasher does not close completely Dishwasher locking mechanism has become stiff (depending on model) Push front until it closes
(this is NOT a product defect) 27 Technical data The appliances must only be used in dry, closed rooms. All SERVO-DRIVE appliances are of protec-
tion class III and must only be supplied with safety extra-low voltage (SELV). They are only to be used with the transformers provided by Blum. Input voltage: ......................................................................................100240 VAC 10 % / 5060 Hz Input voltage Japan: ............................................................................... 100 VAC 10 %/50 and 60 Hz Input current: ................................................................................................................................. 0.6 A Output voltage: ......................................................................................................................... 24 VDC Nominal output current: ................................................................................................................ 1.0 A Ambient temperature: ........................................................................................................ 0 to +40 C Protection category: ....................................................................................................................... IP40 Power consumption in standby mode: .................................................................................. <0.075 W Maximum altitude ...........................................................2000 m (at an ambient temperature of 25 C) Input voltage: .................................................................................................100240 VAC / 5060 Hz Input voltage Japan: ............................................................................. 100 VAC 10 % / 50 and 60 Hz Input current: ................................................................................................................................. 0.3 A Output voltage: ......................................................................................................................... 24 VDC Nominal output current: ................................................................................................................ 0.5 A Ambient temperature: ........................................................................................................ 0 to +40 C Protection category: ....................................................................................................................... IP44 Power consumption in standby mode: .................................................................................. <0.075 W Maximum altitude ...........................................................2000 m (at an ambient temperature of 25 C) SERVO-DRIVE for AVENTOS drive unit Supply voltage: .......................................................................................................................... 24 VDC Rated current: ................................................................................................................................ 2.0 A Power consumption in standby mode: ................................................................... 0.6 W (front closed) Ambient temperature: .......................................................................................................... 0 to +40 C Protection category: ........................................................................................................................ IP20 28 EN SERVO-DRIVE for AVENTOS HK top drive unit Supply voltage: .......................................................................................................................... 24 VDC Rated current: ................................................................................................................................ 2.0 A Power consumption in standby mode: ................................................................. <0.6 W (front closed) Ambient temperature: .......................................................................................................... 0 to +40 C Protection category: ........................................................................................................................ IP20 Operating mode: ......................................................................... S3 5% max. 10 movements / 10 min. SERVO-DRIVE drive unit for LEGRABOX/TANDEMBOX/MOVENTO/TANDEM Supply voltage: .......................................................................................................................... 24 VDC Rated current: ................................................................................................................................ 2.0 A Power consumption in standby mode: ....................................................................................... 0.12 W Ambient temperature: .......................................................................................................... 0 to +50 C Protection category: ........................................................................................................................ IP20 Supply voltage: .......................................................................................................................... 24 VDC Rated current: ................................................................................................................................ 2.0 A Power consumption in standby mode (without wireless receiver): ............................................ 0.12 W Power consumption in standby mode (with wireless receiver): ............................................... 0.203 W Ambient temperature: .......................................................................................................... 0 to +50 C Protection category: ........................................................................................................................ IP20 SERVO-DRIVE switch Frequency: ................................................................................................................................ 2.4 GHz Transmission method: ............................................................................ Bidirectional, via a coded wire Range: ................................................................. typically 10 m (depending on material and contents) Ambient temperature: .......................................................................................................... 0 to +40 C Protection category: ........................................................................................................................ IP20 Battery supply: ..................................................................................... 3 V Lithium button cell CR2032 29 Simplified EU Declaration of Conformaty Hereby, Julius Blum GmbH declares that all electrical and electronic article types of Julius Blum GmbH are in compliance with Directive 2011/65/EU. Hereby, Julius Blum GmbH declares that the radio equipment types 21LA001, 21SA001, 21KA001, 2014/53/EU. Hereby, Julius Blum GmbH declares that the electrical and electronic article types Z10A3000, Z10C5000, Z10ZE000 and Z10ZC000 are in compliance with Directive 2014/30/EU. Hereby, Julius Blum GmbH declares that the power supply types Z10NA300 and Z10NE030 are in compliance with Directive 2014/35/EU and Directive 2014/30/EU. The full text of the EU declaration of conformity is available at the following internet address:
www.blum.com/compliance 21P5020 and Z10C5007 are in compliance with Directive 21FA001, 30 EN Spare parts form Name of kitchen distributor/carpenter:
Address:
Name of kitchen owner:
Address:
Commission number:
Fault description:
Part number Z10N Batch number BN Quantity Z10N Z10 21 23 Z10C5007 BN BAU BAU BAU BAU BAU The part number and the batch number can be found here Blum transformer Steckernetzgert Drive unit SERVO-DRIVE switch Wireless receiver 31 l m u B y b t h g i r y p o C
. 9 1 7 0
/
9 3 1
-
A B Julius Blum GmbH Beschlgefabrik Industriestrae 1 6973 Hchst, Austria Tel.: +43 5578 705-0 Fax: +43 5578 705-44 E-Mail: info@blum.com www.blum.com