companies    
happy holidays!

FCC ID: QZE100 2.4GHz/5GHz Mini-PCI Module for Access Point

by: Juniper Networks, Inc. latest update: 2004-09-10 model: 100

Six grants have been issued under this FCC ID from 07/09/2003 to 09/10/2004 (this is one of three releases in 2004 for this grantee). Public details available include frequency information, internal & external photos, and manuals. some products also feature user submitted or linked drivers, password defaults, instructions, warrantee terms, & troubleshooting guides.
permalink for this FCC identifier
search for: Repair details
from iFixIt
 Trade-in? Recycling locations
|
|
|   
eg for Slack usage
all frequencies exhibits applications
manuals
app s submitted / available
1 2 3 4 5 6 Installation Guide Users Manual pdf 1.14 MiB / October 09 2004
1 2 3 4 5 6 Regulatory Information Users Manual pdf 405.18 KiB / October 09 2004
1 2 3 4 5 6 User Manual Users Manual pdf 1.41 MiB January 06 2004
1 2 3 4 5 6
Cover Letter(s) pdf October 09 2004
1 2 3 4 5 6
Cover Letter(s) pdf October 09 2004
1 2 3 4 5 6
Internal Photos pdf October 09 2004
1 2 3 4 5 6
Test Report pdf October 09 2004
1 2 3 4 5 6
Attestation Statements pdf October 09 2004
1 2 3 4 5 6
Parts List/Tune Up Info pdf January 06 2004
1 2 3 4 5 6
Parts List/Tune Up Info pdf January 06 2004
1 2 3 4 5 6
Parts List/Tune Up Info pdf January 06 2004
1 2 3 4 5 6
Cover Letter(s) pdf January 06 2004
1 2 3 4 5 6
Cover Letter(s) pdf January 06 2004
1 2 3 4 5 6
Test Setup Photos pdf January 06 2004
1 2 3 4 5 6
Cover Letter(s) pdf June 10 2003
1 2 3 4 5 6
Cover Letter(s) pdf June 10 2003
1 2 3 4 5 6
Test Report pdf June 10 2003
1 2 3 4 5 6
Internal Photos pdf September 07 2003
1 2 3 4 5 6
Internal Photos pdf September 07 2003
1 2 3 4 5 6
Parts List/Tune Up Info pdf September 07 2003
1 2 3 4 5 6
External Photos pdf September 07 2003
1 2 3 4 5 6
ID Label/Location Info pdf September 07 2003
1 2 3 4 5 6
Test Report pdf September 07 2003
1 2 3 4 5 6
Internal Photos pdf September 07 2003
1 2 3 4 5 6
ID Label/Location Info pdf April 02 2004 / September 07 2003
1 2 3 4 5 6
ID Label/Location Info pdf April 02 2004 / September 07 2003
1 2 3 4 5 6
RF Exposure Info pdf September 07 2003
1 2 3 4 5 6
Cover Letter(s) pdf September 07 2003
1 2 3 4 5 6
Test Report pdf September 07 2003
1 2 3 4 5 6
Test Report pdf September 07 2003
1 2 3 4 5 6
Test Report pdf September 07 2003
1 2 3 4 5 6
Test Report pdf September 07 2003
1 2 3 4 5 6 Installation Guide Users Manual pdf 1.14 MiB / October 09 2004
1 2 3 4 5 6 Regulatory Information Users Manual pdf 405.18 KiB / October 09 2004
1 2 3 4 5 6 User Manual Users Manual pdf 1.41 MiB January 06 2004

frequency equipment class purpose
1 2004-09-10 5745 ~ 5825 DTS - Digital Transmission System Class II permissive change or modification of presently authorized equipment
2 5260 ~ 5320 NII - Unlicensed National Information Infrastructure TX
3 2004-05-25 5745 ~ 5825 DTS - Digital Transmission System
4 2003-10-06 5745 ~ 5825 DTS - Digital Transmission System
5 2003-07-09 5260 ~ 5320 NII - Unlicensed National Information Infrastructure TX Original Equipment
6 5745 ~ 5825 DTS - Digital Transmission System

Application Forms

app s Applicant Information
1 2 3 4 5 6 Effective 2004-09-10
1 2 3 4 5 6 2004-05-25
1 2 3 4 5 6 2003-10-06
1 2 3 4 5 6 2003-07-09
1 2 3 4 5 6 Applicant's complete, legal business name Juniper Networks, Inc.
1 2 3 4 5 6 FCC Registration Number (FRN) 0004536603
1 2 3 4 5 6 Physical Address 1133 Innovation Way
1 2 3 4 5 6 Sunnyvale, California 94089
1 2 3 4 5 6 United States
app s TCB Information
1 2 3 4 5 6 TCB Application Email Address r******@nemko.com
1 2 3 4 5 6 m******@ccsemc.com
1 2 3 4 5 6 TCB Scope A4: UNII devices & low power transmitters using spread spectrum techniques
app s FCC ID
1 2 3 4 5 6 Grantee Code QZE
1 2 3 4 5 6 Equipment Product Code 100
app s Person at the applicant's address to receive grant or for contact
1 2 3 4 5 6 Name M****** G********
1 2 3 4 5 6 Title Sr. Manager Compliance Engineering
1 2 3 4 5 6 Telephone Number (408)********
1 2 3 4 5 6 Fax Number (408)********
1 2 3 4 5 6 E-mail m******@juniper.net
app s Technical Contact
n/a
app s Non Technical Contact
n/a
app s Confidentiality (long or short term)
1 2 3 4 5 6 Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:Yes
1 2 3 4 5 6 No
1 2 3 4 5 6 Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:No
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
app s Cognitive Radio & Software Defined Radio, Class, etc
1 2 3 4 5 6 Is this application for software defined/cognitive radio authorization?No
1 2 3 4 5 6 Equipment ClassDTS - Digital Transmission System
1 2 3 4 5 6 NII - Unlicensed National Information Infrastructure TX
1 2 3 4 5 6 Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)2.4GHz/5GHz Mini-PCI Module for Access Point
1 2 3 4 5 6 2.4GHz/5GHz Mini-PCI Module For Access Point
1 2 3 4 5 6 Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?No
1 2 3 4 5 6 Modular Equipment TypeDoes not apply
1 2 3 4 5 6 Purpose / Application is forClass II permissive change or modification of presently authorized equipment
1 2 3 4 5 6 Original Equipment
1 2 3 4 5 6 Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?Yes
1 2 3 4 5 6 No
1 2 3 4 5 6 Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?No
1 2 3 4 5 6 Grant CommentsClass II Permissive Change Filing. Limited Module Approval. Output power listed is conducted. The transmitter module can only be installed by the Grantee. OEM or user installation is prohibited. When external antennas are used, professional installation is required. Co-located operating conditions with dual transmitter modules have been investigated as documented in the previous filing. This device must be marketed for indoor user only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.
1 2 3 4 5 6 Class II Permissive Change filing. Limited Module Approval. Output power listed is conducted. The transmitter module can only be installed by the Grantee. OEM or user installation is prohibited. Co-located operating conditions with dual transmitter modules have been investigated as documented in the previous filing. This device must be marketed for indoor user only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.
1 2 3 4 5 6 Limited module approval. User installation is prohibited. In this Class II permissive change filing, three external antennas (6dBi, 7dBi section and 10 dBi directional) are added for use in 2.4GHz band only. When external antennas are used, professional installation is required. Co-located operating conditions with dual transmitter modules have been investigated as documented in the previous filings. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented under this FCC ID number, and must be installed in the manner specified therein. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.
1 2 3 4 5 6 Added 802.11g modulation in this Class II permissive change filing. Limited Module Approval. Output power listed isn conducted. The transmitter module can only be installed by the Grantee. OEM or user installation is prohibited. Co-located operating conditions with dual transmitter modules have been investigated as documented in this filing. This device must be marketed for indoor user only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.
1 2 3 4 5 6 Limited Module Approval. Output power listed isn conducted. The transmitter module can only be installed by the Grantee. OEM or user installation is prohibited. Co-located operating conditions with dual transmitter modules have been investigated as documented in this filing. This device must be marketed for indoor user only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.
1 2 3 4 5 6 Limited Module Approval. Output power listed isn conducted. The transmitter module can only be installed by the Grantee. OEM or user installation is prohibited. Co-located operating conditions with dual transmitter modules have been investigated as documented in this filing. This device must be marketed for indoor user only. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. The only antennas approved for use with this module are those documented in the filing, and must be installed in the manner specified therein. End-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements.
1 2 3 4 5 6 Is there an equipment authorization waiver associated with this application?No
1 2 3 4 5 6 If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?No
app s Test Firm Name and Contact Information
1 2 3 4 5 6 Firm Name Nemko USA, Inc.
1 2 3 4 5 6 Compliance Certification Services Inc
1 2 3 4 5 6 Name R**** S******
1 2 3 4 5 6 S****** C********
1 2 3 4 5 6 Telephone Number 858-7******** Extension:
1 2 3 4 5 6 408-4******** Extension:
1 2 3 4 5 6 Fax Number 858-4********
1 2 3 4 5 6 408-4********
1 2 3 4 5 6 E-mail R******@nemko.com
1 2 3 4 5 6 s******@ccsemc.com
Equipment Specifications
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
1 1 15C 36 2412 2462 0.0861
1 2 15C 36 5745 5825 0.203
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
2 1 15E 5180 5240 0.015
2 2 15E 5260 5320 0.024
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
3 1 15C 36 CE 2412 2462 0.0861
3 2 15C CE 5745 5825 0.203
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
4 1 15C CE 2412 2462 0.0861
4 2 15C CE 5745 5825 0.203
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
5 1 15E CE 5180 5240 0.015
5 2 15E CE 5260 5320 0.024
Line Rule Parts Grant Notes Lower Frequency Upper Frequency Power Output Tolerance Emission Designator Microprocessor Number
6 1 15C CE 2412 2462 0.0861
6 2 15C CE 5745 5825 0.203

 

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details

recent releases: 2ASCB-DH043TLB D2G Group LLC O551753824 SWAGTEK ZD3FTF360 Feitian Technologies Co., Ltd. Q9R-5500050000 Stryker Instruments 2ASRT-NPX550 Screeneo Innovation SA

 

  This product uses the FCC Data API but is not endorsed or certified by the FCC