all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 |
|
Manual Part 1 | Users Manual | 2.35 MiB | ||||
1 |
|
Manual Part 2 | Users Manual | 355.39 KiB | ||||
1 | Attestation Statements | |||||||
1 | Cover Letter(s) | |||||||
1 | Cover Letter(s) | |||||||
1 | External Photos | |||||||
1 | Internal Photos | |||||||
1 | ID Label/Location Info | |||||||
1 | Operational Description | |||||||
1 | RF Exposure Info | |||||||
1 | Test Report | |||||||
1 | Test Setup Photos |
1 | Manual Part 1 | Users Manual | 2.35 MiB |
Trapeze Mobility Point MP-71 Installation Guide Part Number 730-9502-0141 Draft Trapeze Networks, Inc. 5753 W. Las Positas Blvd. Pleasanton, CA 94588 Tel: +1 925-474-2200 Fax: +1 925-251-0642 Toll-Free: 877-FLY-TRPZ (877-359-8779) www.trapezenetworks.com 2006 Trapeze Networks, Inc. All rights reserved. Trademarks Trapeze Networks, the Trapeze Networks logo, the Trapeze Networks flyer icon, Mobility Domain, Mobility Profile, Mobility System, Mobility Exchange, MX, Mobility Point, MP, Mobility System Software, MSS, RingMaster, SentrySweep, Trapeze Access Point Access Protocol, and TAPA are trademarks of Trapeze Networks, Inc. All other products and services are trademarks, registered trademarks, service marks, or registered service marks of their respective owners. Disclaimer All statements, specifications, recommendations, and technical information are current or planned as of the date of the publication of this document. They are reliable as of the time of this writing and are presented without warranty of any kind, expressed or implied. In an effort to continuously improve the product and add features, Trapeze Networks reserves the right to change any specifications contained in this document without prior notice of any kind. Comments and Feedback Your feedback on Trapeze documentation is important to us. Send any comments and suggestions to doc-bugs@trapezenetworks.com. For the most current version of all documentation, see www.trapezenetworks.com. ii Customer Service For general information about Trapeze Networks Mobility System products and services, visit www.trapezenetworks.com. For warranty, license, and support information, visit the following sites:
Warranty and software licenses. Current Trapeze Networks warranty and software licenses are available at www.trapezenetworks.com/services/
warranty.asp. Support services. For information about Trapeze support services, visit www.trapezenetworks.com/services/. Or call 1-866-877-9822 (in the US or Canada) or +1 925-474-2400 and select option 5. Note. TRAPEZE NETWORKS SELLS AND SERVICES ITS PRODUCTS PRIMARILY THROUGH ITS AUTHORIZED RESELLERS AND DISTRIBUTORS. If you purchased your product from an authorized Trapeze reseller or distributor and do not have a service contract with Trapeze Networks, you must contact your local reseller or distributor for technical assistance. Contacting the Technical Assistance Center Contact the Trapeze Networks Technical Assistance Center (TAC) by telephone, email, or fax. If you have a service contract or are a Trapeze Authorized Partner, log in to www.trapezenetworks.com/services/sup_programs.asp for more help. Within the US and Canada, call 1-866-TRPZTAC (1-866-877-9822). From locations outside the US and Canada, call +1 925-474-2400. In non-emergencies, send email to support@trapezenetworks.com. When your case is active, you can fax more information to +1 925-474-2423.
(See TAC Response Time and Information to Have Available on page iv.) iii ConfidentialInternal Use Only25 Oct 06 ConfidentialInternal Use Only TAC Response Time TAC responds to service requests as follows:
Contact method Telephone Priority Emergency Time of call Monday through Friday, 8 a.m. to 6 p.m. Pacific Time (GMT-8) After hours 8 a.m. to 6 p.m. Pacific Time (GMT-8) Emergency Non-emergency Monday through Friday, Probable response time Immediate 1-hour callback Same business day Email Non-emergency After hours Non-emergency Monday through Friday, 8 a.m. to 6 p.m. Pacific Time (GMT-8) Next business day 1-hour callback Non-emergency After hours Next business day Information to Have Available To expedite your service request, have the following information available when you call or write to TAC for technical assistance:
Your company name and address Your name, telephone number, cell phone or pager number, and email address Name, model, and serial number of the product(s) requiring service Software version and release number Wireless client information License levels for RingMaster and Mobility Exchange (MX) products Description of the problem and status of the troubleshooting effort iv Trapeze MP-71 Installation Guide Contents Customer Service. iii 1 Introducing the Trapeze Networks Mobility System . 1 Trapeze Networks Mobility System . 1 Documentation . 2 Safety and Advisory Notices . 3 Text and Syntax Conventions . 4 2 MP-71 Overview . 5 Features and Benefits . 6 Package Checklist . 6 External Hardware Overview . 7 Installation Requirements and Recommendations . 9 RingMaster Network Plan and Work Orders . 9 MX Switch Recommendation . 10 Hardware Connection . 10 3 Technical Specifications. 11 MP-71 Mechanical and Compliance Specifications . 12 Contents v vi Trapeze MP-620 Installation Guide 1 Introducing the Trapeze Networks Mobility System Trapeze Networks Mobility System . 1 Safety and Advisory Notices . 2 This guide shows you how to install a Trapeze Networks Mobility Point
(MP) access point, model MP-71, in a Trapeze Networks Mobility System wireless LAN (WLAN). Read this guide if you are a network administrator or other person installing MP access points in a network. Trapeze Networks Mobility System The Trapeze Networks Mobility System is a system for planning and deploying a secure wireless LAN (WLAN) in an existing wired enterprise network. The Trapeze system provides authenticated connectivity to both wireless and wired users in large environments such as office buildings, hospitals, and university campuses. The Trapeze Mobility System fulfills the three fundamental requirements of an enterprise WLAN: It eliminates the distinction between wired and wireless networks, allows users to work safely from anywhere (secure mobility), and provides a comprehensive suite of intuitive tools for planning and managing the network before and after deployment. Introducing the Trapeze Networks Mobility System 1 Safety and Advisory Notices Chapter 1 The Trapeze Networks Mobility System consists of the following components:
RingMaster tool suitea full-featured graphical user interface (GUI) application for planning, configuring, deploying, and managing a WLAN and its users One or more Mobility Exchange (MX) switchesdistributed, intelligent machines for managing user connectivity, connecting and powering Mobility Point (MP) access points, and connecting the WLAN to the wired network backbone Multiple Mobility Point (MP) access pointswireless access points (APs) that transmit and receive radio frequency (RF) signals to and from wireless users and connect them to an MX switch Mobility System Software (MSS)the operating system that runs all MX switches and MP access points in a WLAN, and is accessible through a command-line interface (CLI), the Web View interface, or the RingMaster GUI Safety and Advisory Notices The following kinds of safety and advisory notices appear in this manual. For translations of all safety warnings, see Trapeze Regulatory Information document. Caution! This situation or condition can lead to data loss or damage to the product or other property. Warning! This situation or condition can cause injury. Warning! High voltage. This situation or condition can cause injury due to electric shock. 2 Trapeze MP-71 Installation Guide Safety and Advisory Notices Chapter 1 Warning! Radiation. This situation or condition can cause injury due to improper handling of fiber-optic equipment. Note. This information is of special interest. Text and Syntax Conventions Trapeze manuals use the following text and syntax conventions:
Convention Monospace text Bold text Italic text Use Sets off command syntax or sample commands and system responses. Highlights commands that you enter or items you select. Designates command variables that you replace with appropriate values, or highlights publication titles or words requiring special emphasis. Menu Name > Command Indicates a menu item that you select. For example, File > New indicates that you select New from the File menu. Enclose optional parameters in command syntax. Enclose mandatory parameters in command syntax. Separates mutually exclusive options in command syntax.
[ ] (square brackets)
{ } (curly brackets)
| (vertical bar) Introducing the Trapeze Networks Mobility System 3 2 MP-71 Overview Features and Benefits . 6 Package Checklist . 6 External Hardware Overview . 7 Installation Requirements and Recommendations . 9 Hardware Connection . 10 Trapeze Networks Mobility Point (MP), model MP-71, provides IEEE 802.11b/g wireless access to the network. MP access points are designed for use with a Trapeze Networks Mobility Exchange (MX) switch. MP access points require hardware installation only. All configuration for an MP access point takes place on the MX switch. Warning! Installation must be performed by qualified service personnel only. Read and follow all warning notices and instructions marked on the product or included in the documentation. Before installing the product, read the Trapeze Regulatory Information document. Note. The MP radios are disabled by default and can be enabled only by a system administrator using the MX switch. MP-71 Overview 5 Features and Benefits Chapter 2 Features and Benefits The MP-71 provides the following features and benefits:
High performance 11 Mbps (802.11b) or 54 Mbps (802.11g) data rate Wi-Fi, WPA interoperability IEEE 802.11b and 802.11g compliant WPA with PSK/TKIP/AES support WPA2 support IEEE 802.3af (PoE) compliance Package Checklist The MP-71 package includes:
One MP-71 Mobility Point (MP) access point User Guide Two reverse polarity SMA antennas Contact Trapeze Networks if there are any incorrect, missing or damaged parts. If possible, retain the carton, including the original packing materials. Use them again to repack the product in case there is a need to return it. 6 Trapeze MP-71 Installation Guide Package Checklist Chapter 2 External Hardware Overview Figures 1 and 2 show the external hardware features of the MP-71. Figure 1. MP-71 Front View Antennas MP-71 Overview 7 Package Checklist Chapter 2 Figure 2. MP-71 Rear View DC Input Reset LAN Figure 3. Placement of MP-71 LEDs 11b/g 100M LINK/ACT Power 8 Trapeze MP-71 Installation Guide Installation Requirements and Recommendations Chapter 2 Table 1. LED Descriptions Status On Off Blinking 802.11b/g Link is activated. No wireless connection No LAN connection Transmit/Receive Data Transmit/Receive Data Netword Link is activated. Power Power No Power N/A Installation Requirements and Recommendations For best results, follow these requirements and recommendations before installing an MP-71 access point. RingMaster Network Plan and Work Orders If you are using RingMaster to plan your Trapeze Networks Mobility System installation, you might want to create and verify a network plan for the entire Trapeze network installation and generate an MP work order, before installing MP access points. A network plan and the MP work orders generated from it provide the following information about MP access point installation and configuration:
Number of MP access points required for adequate WLAN capacity in each coverage area Detailed installation location for each MP access point Settings for all MP access points in the WLAN
(For information about installing RingMaster, creating and verifying a network plan, and generating an MP work order, see the Trapeze RingMaster Users Guide and Trapeze RingMaster Reference Manual.) MP-71 Overview 9 Hardware Connection Chapter 2 MX Switch Recommendation Trapeze Networks recommends that you install and configure an MX switch before installing an MP access point. If the switch is already installed and configured for the MP access point, you can immediately verify the cable connection when you plug the cable into the MP access point. Hardware Connection Placing the MP-71 1 Locate the MP-71 at the center of your wireless network for better coverage of wireless stations. 2 Adjust the direction of the antennas as necessary. Connecting the MP-71 3 Connect the Ethernet cable to an MX, a PoE, or a PoE mid-span injector. 4 Configuration of the MP-71 is performed from an MX or RingMaster. 10 Trapeze MP-71 Installation Guide 3 Technical Specifications This chapter lists the technical specifications for the Trapeze Networks MP-71 access point. Table 2 lists the mechanical and compliance specifications. (For detailed compliance information, see the Trapeze Regulatory Information document.)
(For specifications for the MX switch, see the Trapeze Mobility Exchange Installation and Basic Configuration Guide.) Note. This Listed Accessory is designed and approved to be used only with Trapeze Networks Mobility Exchange (MX) models. Note. The MP radios are disabled by default and can be enabled only by the system administrator using the RingMaster management application or the MX switchs command-line interface (CLI). Note. The radio frequency band, operating channels, and transmit power depend on the country of operation specified by the system administrator using RingMaster or the CLI of MX switch. Technical Specifications 11 MP-71 Mechanical and Compliance Specifications Chapter 3 MP-71 Mechanical and Compliance Specifications Table 2 lists the mechanical and compliance specifications for the MP-71. Table 2. MP-71 Mechanical and Compliance Specifications Specification LAN port Power Supply Temperature Range Humidity Modulation Types Network Configuration Operating Frequency Power Injector Physical Size Weight EMC Compliance (Class B) Radio Certification Description 1X RJ-45 10/100 Mbps port with PoE (802.af) support 5V, 2A DC input, requires external power adapter (not supplied) Power over Ethernet (802.3af) Operating: 0 to 40 C (32 - 104F) Storage: -40 to 80 C (-40 to 176 F) 10% to 90% (non-condensing) 802.11g: OFDM 802.11b: CCK Infrastructure Mode: 802.11b/g 802.11b/g:
2.4 GHz to 2.4835 GHz based on country regulations Input: 100-240 VAC, 47-63 Hz, 1.5 A Output: 48 VDC, 1.2 A 190.0 x 145.5 x 29.0 mm (7.48 x 5.73 x 1.14 in) 4.8 kg (10.58 lbs) China: SRRC Taiwan: DGT Australia/New Zealand: ASIN7 3548 South Korea: MIC 12 Trapeze MP-71 Installation Guide MP-71 Mechanical and Compliance Specifications Chapter 3 Table 2. MP-71 Mechanical and Compliance Specifications Specification Safety Standards Description UL/cUL60950-1, IEC60950-1 (CB) IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX, IEEE 802.11b, IEEE 802.11g Technical Specifications 13 Trapeze Networks, Inc. 5753 W. Las Positas Blvd. Pleasanton, CA 94588 Tel: +1 925-474-2200 Fax: +1 925-251-0642 Toll-Free: 877-FLY-TRPZ (877-359-8779) www.trapezenetworks.com Trapeze MP-71 Installation Guide
1 | Manual Part 2 | Users Manual | 355.39 KiB |
Trapeze Regulatory Information Hardware Safety Symbols . 1 Safety and Advisory Notice Conventions . 2 Regulatory Compliance Information . 3 Declarations of Conformity . 8 Translations of Warnings and Warning Conventions . 10 This document contains important safety information. Read all the safety warnings before you begin installation. Hardware Safety Symbols Trapeze Networks Mobility System products are labeled with one or more of the following safety symbols:
Warning! High voltage. Attention! Refer to the manual. Warning! Class 1 Laser. Protective ground (earth) terminal. Frame or chassis terminal. Trapeze Networks, Inc. 5753 W. Las Positas Blvd. Pleasanton, CA 94588 Tel: +1 925-474-2200 Fax: +1 925-251-0642 Toll-Free: 877-FLY-TRPZ (877-359-8779) For the most current version of this document see www.trapezenetworks.com Part Number: 730-9502-0037, Revision G Safety and Advisory Notice Conventions Direct current (DC). Alternating current (AC). Complies with Underwriters Laboratories regulations in United States and Canada. Complies with European Union (CE) regulations. Contains a radio transmitter that complies with the Radio and Telecommunications Technical Equipment (R&TTE) Directive 1995/5/EC to an unharmonized frequency spectrum. Safety and Advisory Notice Conventions The following safety and advisory notices can appear in Trapeze Networks product documentation:
Warning! This situation or condition can cause injury. Warning! High voltage. This situation or condition can cause injury due to electric shock. Warning! Radiation. This situation or condition can cause injury due to improper handling of fiber-optic equipment. Caution! This situation or condition can lead to data loss or damage to the product or other property. Note. This information is of special interest. 2 Trapeze Regulatory Information Regulatory Compliance Information Regulatory Compliance Information Trapeze Networks products cause no electromagnetic interference to other devices if installed and operated properly and without modification. Modification Prohibition Caution! The Part 15 radio device in the access point operates on a noninterference basis with other devices operating at the same frequency. Any modification to this device not expressly approved by Trapeze Networks can void your authority to operate the device. The manufacturer, Trapeze Networks, is not responsible for any interference caused by unauthorized modification of the devices included with this product, or the substitution or attachment of connecting cables or equipment other than supplied by Trapeze Networks. The correction of interference caused by such unauthorized modification, substitution, or attachment is your responsibility. Trapeze Networks and its authorized resellers or distributors are not liable for any damage or violation of government regulations that might arise from failure to comply with these guidelines. Wiring Notice Note. Other than the power cord, the wiring interconnecting these units is designed to be used intra-building only. Federal Communications Commission Notice (United States) This device uses, generates, and radiates radio frequency energy. The radio frequency energy produced by this device is well below the maximum exposure allowed by the Federal Communications Commission
(FCC). Operation is subject to the following conditions:
This device may not cause harmful interference. This device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits of a Class B or Class A (as marked) digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment. Trapeze Regulatory Information 3 Regulatory Compliance Information This accepted equipment is designed and tested to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed in accordance with the instruction manual, may cause harmful interference. There is no guarantee that interference will not occur. If this equipment does cause interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to correct the interference by one of the following measures:
Reorient or relocate the device to reorient or relocate the receiving antenna. Increase separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experience radio/TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operating conditions. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. If this device is going to be operated in the 5.15 5.25 GHz frequency range, then it is restricted to indoor environment only. Canadian Department of Communications Industry Canada Notice
(Canada) This digital apparatus meets the requirements of Canadian Interference-Causing Equipment Regulation RSS-210. Cet appareil respecte les exigences du Reglement sur le material broilleur du Canada. This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:
1 This device may not cause harmful interference, and 2 This device must accept any interference received, including interference that may cause undesired operating conditions. 4 Trapeze Regulatory Information Regulatory Compliance Information The installer of this radio equipment must ensure that the antenna is located or pointed such that it does not emit RF field in excess of Health Canada limits for the general population; consult Safety Code 6, obtainable from Health Canadas Web site www.hc-sc.gc.ca/rpb. This equipment complies with the FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body. The device is certified to the requirements of IC RSS-139-1. The use of this device in a system operating either partially or completely outdoors may require the user to obtain a license for the system. For more information, contact your local Industry Canada office. Radio Frequency Compliance Information (European Union) The MP access point has been tested and found to comply with European Telecommunications Standard
(ETS) 300 328 for 2.4-GHz equipment and ETS 301 893 for 5-GHz equipment. These standards cover wideband data transmission systems referred to in European Conference of Postal and Telecommunications Administrations (CEPT) recommendation T/R 10.01. Voluntary Control Council for Interference by Information Technology Equipment Notice (Japan) Translation: This is a Class A product based on the standard of the Voluntary Control Council for Interference by Information Technology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occurs, the user may be required to take corrective actions. Trapeze Regulatory Information 5 Regulatory Compliance Information Regulatory Compliance Notice (Korea) 6 Trapeze Regulatory Information Regulatory Compliance Information Lithium Battery Caution The MX switch contains a lithium battery. If you need to replace the battery, make sure you dispose of the battery properly according to local regulations and replace the battery only with another comparable lithium battery. Caution! Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions. Attentie! Gevaar voor explosie als accu wordt vervangen door onjuist type. Verwijder gebruikte accu's in overeenstemming met de instructies. Vorsicht! Wenn die Batterie durch einen falschen Typ ersetzt wird, besteht das Risiko einer Explosion. Entsorgen Sie die gebrauchten Batterien entsprechend den Anweisungen. Attention ! Risque d'explosion si la batterie est remplace par une batterie non conforme. Jetez les batteries usages selon les instructions. Precaucin! Peligro de explosin si la bateria es reemplazada con otra de tipo incorrecto. Deseche las baterias usadas siguiendo las instrucciones. Advarsel! Lithiumbatteri Eksplosionsfare ved fejlagtig hndtering. Udskiftning m kun ske med batteri af samme fabrikat og type. Trapeze Regulatory Information 7 Declarations of Conformity Declarations of Conformity The following sections contain declarations of conformity. European Union Notice All products labeled with the CE marking comply with the Electromagnetic Compliance (EMC) Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms (ENs). The equivalent international standards are listed in parentheses. EN 55022 (CISPR 22)Electromagnetic Interference EN 55024 (IEC 61000-4-2, -3, -4, -5, -6, -8, -11)Electromagnetic Immunity EN 61000-3-2 (IEC 610000-3-2)Power Line Harmonics EN 61000-3-3 (IEC 610000-3-3)Power Line Flicker EN 60 950 (IEC 60950)Product Safety Products labeled with the CE alert marking contain a radio transmitter that complies with the Radio Equipment and Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC to an unharmonized frequency spectrum, issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms (ENs). Where applicable, the equivalent international standards are listed in parentheses. EN 60 950 (IEC 60950)Product Safety EN 300 328Technical Requirements for Radio Equipment ETS 300 826 and ETS 301 489-17General EMC requirements for radio equipment ETS 301 893Broadband Radio Access Networks (BRAN) HiperLAN/2 Harmonized EN covering essential requirements of Article 3.2 of the R&TTE Directive Point-to-multipoint digital fixed radio systems and antennas To determine the type of transmitter, check the identification label on your product. 8 Trapeze Regulatory Information Declarations of Conformity European Community, Switzerland, Norway, Iceland, and Liechtenstein Declarations Table 1 lists European declarations of conformity with Radio Equipment and Telecommunications Terminal Equipment (R&TTE) Directive 1999/5/EC. Table 1. European Declarations of Conformity with R&TTE Directive 1999/5/EC Language English Deutsch Dansk Espaol Franais slenska Italiano Nederlands Norsk Portugus Suomalainen Svenska Declaration Statement This equipment complies with the essential requirements and other relevant provisions of Directive 1999/5/EC. Dieses Gert entspricht den grundlegenden Anforderungen und den weiteren entsprecheneden Vorgaben der Richtlinie 1999/5/EU. Dette udstyr er i overensstemmelse med de vsentlige krav og andre relevante bestemmelser i Directiv 1999/5/EF. 1999/5/. Este equipo cumple con los requisitos esenciales asi como con otras disposiciones de la Directive 1999/5/EC. Cet appareil est conforme aux exigencies essentialles et aux autres dispositions pertinantes de la Directive 1999/5/EC. essi bnaur samrmist lgbonum krfum og rum kvum tilskipunar 1999/5/ESB. Questo apparato conforme ai requisiti essenziali ed agli altri principi sanciti dalla Direttiva 1999/5/EC. Deze apparatuur voldoet aan de belangrijkste eisen en andere voorzieningen van richtlijn 1999/5/EC. Dette utstyret er i samsvar med de grunnleggende krav og andre relevante bestemmelser i EU-directiv 1999/5/EC. Este equipamento satisfaz os requisitos essenciais e outras provises da Directiva 1999/5/EC. Tm laite tytt direktiivin 1999/5/EY oleelliset vaatimukset ja on siin asetettujen muidenkin ehtojen mukainen. Denna utrustning r i verensstmmelse med de vsentliga kraven och andra relevanta bestmmelser i Direktiv 1999/5/EC. Trapeze Regulatory Information 9 Translations of Warnings and Warning Conventions Translations of Warnings and Warning Conventions Not all of these warnings apply to every Trapeze Networks product. The warnings that apply to a specific product appear in the installation guide for that product. The installation guides containing these warnings are located on the documentation CD. Warning Conventions Warning! This situation or condition can cause injury. Waarschuwing! Deze situatie of omstandigheid kan letsel veroorzaken. Warnung! Diese Situation oder dieser Zustand kann zu Verletzungen fhren. Avertissement ! Cette situation ou cette condition peuvent provoquer des blessures. Aviso Esta situacin o condicin puede causar lesiones. Warning! High voltage. This situation or condition can cause injury due to electric shock. Waarschuwing! Hoog voltage. Deze situatie of omstandigheid kan letsel veroorzaken door elektrische schokken. Warnung! Hochspannung. Diese Situation oder dieser Zustand kann einen Elektroschock verursachen. Avertissement ! Haute tension. Cette situation ou cette condition peuvent provoquer des blessures dues des dcharges lectriques. Aviso Alta tensin. Esta situacin o condicin puede causar lesiones por descarga elctrica. 10 Trapeze Regulatory Information Translations of Warnings and Warning Conventions Warning! Radiation. This situation or condition can cause injury due to improper handling of fiber-optic equipment. Waarschuwing! Straling. Deze situatie of omstandigheid kan letsel veroorzaken door onjuist gebruik van glasvezelapparatuur. Warnung! Strahlung. Diese Situation oder dieser Zustand kann durch falschen Umgang mit glasfaserbasierten Gerten zu Verletzungen fhren. Avertissement ! Radiation. Cette situation ou cette condition peuvent provoquer des blessures dues une manipulation inapproprie dappareils quips de fibres optiques. Aviso Radiacin. Esta situacin o condicin puede causar lesiones debido a un manejo inadecuado del equipamiento de fibra ptica. Qualified Service Personnel Warning Warning! Installation must be performed by qualified service personnel only. Read and follow all warning notices and instructions marked on the product or included in the documentation. Before installing the product, read the rest of this document. Waarschuwing! De installatie mag alleen worden uitgevoerd door bevoegd onderhoudspersoneel. Het is essentieel dat u kennis neemt van alle waarschuwingen en instructies aangebracht op het product zelf en/of opgenomen in de documentatie. Voordat u het product installeert, dient u dit document in zijn geheel te hebben gelezen. Warnung! Die Installation darf nur von einem qualifizierten Kundendienstmitarbeiter vorgenommen werden. Lesen Sie alle Warnhinweise und Anweisungen auf dem Produkt oder in der Dokumentation und befolgen Sie sie. Bevor Sie das Produkt installieren, sollten Sie dieses Dokument vollstndig lesen. Avertissement ! Linstallation doit tre effectue uniquement par des techniciens qualifis. Lisez et suivez toutes les notices davertissement et les instructions figurant sur le produit ou comprises dans la documentation. Lisez le reste de ce document avant dinstaller ce produit. Aviso Slo puede realizar la instalacin personal cualificado de asistencia tcnica. Lea y siga todas las notas de advertencia e instrucciones indicadas en el producto o incluidas en la documentacin. Antes de instalar el producto, lea el resto de este documento. Trapeze Regulatory Information 11 Translations of Warnings and Warning Conventions Radio Safety Warnings Warning! Do not operate the MP access point near unshielded blasting caps or in an otherwise explosive environment unless the device has been modified for such use by qualified personnel. Waarschuwing! Het MP-toegangspunt mag niet worden gebruikt in de nabijheid van onafgeschermde slaghoedjes of in een andere explosieve omgeving tenzij het apparaat voor een dergelijk gebruik is aangepast door bevoegd personeel. Warnung! Die MP-Zugriffspunkte sollten nicht neben ungeschirmten Sprengkapseln betrieben oder in einer explosiven Umgebung eingesetzt werden. Fr einen solchen Einsatz muss das Gert von einem qualifizierten Kundendienstmitarbeiter entsprechend angepasst werden. Avertissement ! Le point daccs MP ne doit pas fonctionner prs de dtonateurs non blinds ou dans un autre environnement qui prsent un risque dexplosion, moins que cet appareil nait t adapt en vue dune telle utilisation par du personnel qualifi. Aviso No utilice el punto de acceso de MP cerca de detonadores no blindados ni en un entorno explosivo, a menos que haya sido modificado el dispositivo con ese fin por personal cualificado. Warning! Do not touch or move the MP access point when the antennas are transmitting or receiving. Waarschuwing! Het MP-toegangspunt mag niet worden aangeraakt of verplaatst terwijl de antennes uitzenden of ontvangen. Warnung! Berhren oder bewegen Sie den MP-Zugriffspunkt nicht, whrend die Antennen senden oder empfangen. Avertissement ! Ne touchez ni ne dplacez le point daccs MP lorsque les antennes sont en cours de transmission ou de rception. Aviso No toque ni mueva el punto de acceso de MP cuando las antenas estn transmitiendo o recibiendo seales. 12 Trapeze Regulatory Information Translations of Warnings and Warning Conventions Warning! Do not hold any radio device so that the antenna is very close to or touching the face, eyes, or other exposed body part while the device's radio antenna is transmitting. Waarschuwing! De antenne van een apparaat dat radiogolven aan het uitzenden is, mag nooit vlakbij of tegen het gezicht, de ogen of een andere onbedekt deel van het lichaam worden gehouden. Warnung! Halten Sie die drahtlosen Gerte whrend der bertragung mit der Antenne nicht nahe ans Gesicht, an die Augen oder an andere ungeschtzte Krperteile und berhren Sie die Antenne nicht. Avertissement ! Ne maintenez pas lantenne dun appareil radio prs du visage, des yeux ou dune autre partie du corps expose ou en contact avec ces parties du corps, lorsquelle est en cours de transmission. Aviso No coloque ningn dispositivo de radio demasiado cerca de la antena ni en contacto con la cara, los ojos u otras partes del cuerpo que estn al descubierto mientras la antena de radio del dispositivo est transmitiendo seales. Warning! Before using a wireless device in a hazardous location, consult the local codes, national codes, and safety directors of the location for usage constraints. Waarschuwing! Voordat u een draadloos apparaat gebruikt op een gevaarlijke locatie, dient u de plaatselijke en landelijke voorschriften, en de veiligheidsvoorschriften voor de locatie te raadplegen over eventuele gebruiksbeperkingen. Warnung! Bevor Sie drahtlose Gerte an einem gefhrlichen Standort einsetzen, sollten Sie die lokalen und nationalen Regelungen und Sicherheitsbestimmungen des Standorts auf Nutzungsbeschrnkungen berprfen. Avertissement ! Avant dutiliser un appareil sans fil dans un endroit dangereux, consultez la rglementation locale et nationale ainsi que les responsables de la scurit de lendroit concern pour obtenir des informations relatives aux conditions et aux limites dutilisation de cet appareil. Aviso Antes de utilizar un dispositivo inalmbrico en una ubicacin peligrosa, consulte los cdigos locales y nacionales y a los responsables de seguridad de la ubicacin para conocer las restricciones de uso. Trapeze Regulatory Information 13 Translations of Warnings and Warning Conventions Lightning Warning Warning! Do not connect or disconnect cables or otherwise work with the MP access point hardware during periods of lightning activity. Waarschuwing! Tijdens onweer met bliksem mogen kabels nooit worden aangekoppeld aan of losgekoppeld van het MP-toegangspunt of andere werkzaamheden aan het MP-toegangspunt worden verricht. Warnung! Verbinden und trennen Sie whrend eines Gewitters keine Kabel zum MP-Zugriffspunkt und arbeiten Sie nicht damit. Avertissement ! Ne connectez pas et ne dconnectez pas de cbles et, de manire gnrale, ne travaillez pas sur le matriel du point daccs MP lorsquil y a un risque de foudre. Aviso No conecte ni desconecte cables, ni tampoco trabaje con el hardware del punto de acceso de MP durante una tormenta elctrica. Laser Warning Warning! The gigabit Ethernet fiber-optic interfaces use Class 1 lasers. To reduce the risk of eye injury, do not stare into the interface or otherwise direct the laser beam into your eye. Waarschuwing! De gigabit Ethernet glasvezel interfaces gebruiken Klasse 1 lasers. Teneinde oogletsel te voorkomen, mag u nooit rechtstreeks in de interface kijken of een laserstraal op andere wijze op uw oog richten. Warnung! Fr die Glasfaserschnittstellen werden bei Gigabit-Ethernet Class 1-Laser verwendet. Vermeiden Sie Augenverletzungen, indem Sie nicht in die Schnittstelle schauen oder den Laserstrahl auf Ihr Auge richten. Avertissement ! Les interfaces Gigabit Ethernet fibre optique utilisent des lasers de classe 1. Pour rduire le risque de blessure oculaire, ne regardez pas directement linterface et ne dirigez pas le faisceau laser vers vos yeux. Aviso Las interfaces de fibra ptica Gigabit Ethernet utilizan lseres de Clase 1. Para reducir el riesgo de sufrir lesiones oculares, no mire fijamente la interfaz ni dirija el rayo lser hacia los ojos. 14 Trapeze Regulatory Information Translations of Warnings and Warning Conventions Earth Ground Warning Warning! Earth grounding is required for an MX switch installed in a rack. If you are relying on the rack to provide ground, the rack itself must be grounded with a ground strap to the earth ground. Metal screws attaching the switch to the rack provide ground attachment to the rack. Waarschuwing! Aarding aan de grond is vereist voor een MX switch genstalleerd in een rek. Als u het rek gebruikt als massa, dan dient het rek zelf via een aardingsstrip verbonden te zijn met grondaarding. De metalen bouten waarmee de switch is bevestigd aan het rek zorgen voor aarding van het rek. Warnung! Fr einen MX-Switch, der in einem Rack installiert ist, ist eine Erdung erforderlich. Wenn Sie die Erdung ber das Rack vornehmen mchten, mssen Sie es ber ein Masseband mit der Erde verbinden. Die Erdung zum Rack erfolgt dann ber die Metallschrauben, die den Schalter mit dem Rack verbinden. Avertissement ! La mise la terre est requise pour un commutateur MX install dans un chssis. Si vous utilisez le chssis comme masse, celui-ci doit tre mis la terre au moyen dun cble de mise la terre reli la prise de terre. Les vis mtalliques qui attachent le commutateur au chssis assurent une mise la masse au chssis. Aviso Un interruptor MX instalado en un bastidor necesita una conexin a masa. Para utilizar el bastidor como conexin a masa debe conectar a masa dicho bastidor con una tira de conexin a masa. Los tornillos metlicos que fijan el interruptor al bastidor proporcionan conexin a masa al bastidor. Trapeze Regulatory Information 15 Translations of Warnings and Warning Conventions Rack Installation Warnings Warning! Trapeze Networks recommends that you ask someone to assist you with the remaining steps. If you accidentally drop the MX switch, you can be injured and the switch can be damaged. Waarschuwing! Trapeze Networks adviseert dat u bij het uitvoeren van de resterende stappen iemand ter assistentie vraagt. Als u de MX switch per ongeluk laat vallen, kunt u letsel oplopen en kan de switch beschadigd raken. Warnung! Trapeze Networks empfiehlt, dass Sie jemanden bitten, Ihnen beim Ausfhren der weiteren Schritte zu helfen. Wenn Sie den MX-Switch versehentlich fallen lassen, knnten Sie dadurch verletzt werden und der Switch wird eventuell beschdigt. Avertissement ! Trapeze Networks vous conseille de demander lassistance dune autre personne pour les tapes restantes. Si vous laissez tomber le commutateur MX par accident, vous pouvez vous blesser et le commutateur risque dtre endommag. Aviso Trapeze Networks le recomienda que pida la ayuda de alguien para realizar los pasos restantes. Si el interruptor MX se cae accidentalmente, usted puede sufrir lesiones y el interruptor puede sufrir daos. 2005 Trapeze Networks, Inc. All rights reserved. Trapeze Networks, the Trapeze Networks logo, the Trapeze Networks flyer icon, Mobility System, Mobility Exchange, MX, Mobility Point, MP, Mobility System Software, MSS, RingMaster, AAA Integration and RADIUS Scaling, ActiveScan, AIRS, Bonded Auth, FastRoaming, Granular Transmit Power Setting, GTPS, GuestPass, Layer 3 Path Preservation, Location Policy Rule, LPR, Mobility Domain, Mobility Profile, Passport-Free Roaming, SentryScan, Time-of-Day Access, TDA, TAPA, Trapeze Access Point Access Protocol, Virtual Private Group, VPG, Virtual Service Set, Virtual Site Survey and WebAAA are trademarks of Trapeze Networks, Inc. Trapeze Networks SafetyNet is a service mark of Trapeze Networks, Inc. All other products and services are trademarks, registered trademarks, service marks or registered service marks of their respective owners. 16 Translations of Warnings and Warning Conventions Warning! To prevent the MX switch from slipping, do not release the switch until all the rack-mount screws are tight. Waarschuwing! Laat de MX switch niet los totdat alle bevestigingsbouten goed zijn vastgedraaid om te voorkomen dat de switch uit uw handen glijdt. Warnung! Sie vermeiden, dass der MX-Switch abrutscht, indem Sie ihn festhalten, bis alle Rack-Befestigungsschrauben angezogen sind. Avertissement ! Pour viter que le commutateur MX ne tombe, ne le lchez pas tant que les vis de montage du chssis ne sont pas fixes. Aviso Para evitar que el interruptor MX se caiga, no lo suelte hasta que todos los tornillos del bastidor estn bien apretados. Overcurrent Warning Warning! The MX switch relies on the buildings installation for overcurrent protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 10 A international) is used on the phase conductors. Waarschuwing! De MX switch is afhankelijk van de in het gebouw genstalleerde beveiliging tegen overstroom. Op de fase-aders dient een zekering of circuitonderbreker te worden gebruikt van maximaal 240 V~, 10 A. Warnung! Der Lastschutz des MX-Switch hngt vom Gesamtlastschutz des Gebudes ab. Sie sollten sicherstellen, dass die Phasen mit maximal 240 V~ / 10 A abgesichert sind. Avertissement ! La protection du commutateur MX contre les surintensits dpend de linstallation lectrique du btiment. Assurez-vous quun fusible ou un disjoncteur infrieur ou gal 120 VCA, 15 A .-U. (240 VCA, 10 A pour les autres pays) est utilis sur les conducteurs de phase. Aviso El interruptor MX est protegido contra las sobrecargas de corriente mediante la instalacin del edificio. Asegrese de utilizar un fusible o un disyuntor que no supere los 120 VAC, 15A en EE.UU. (240 VAC, 10 A en el resto del mundo) en los conductores de fase. Trapeze Regulatory Information 17 Translations of Warnings and Warning Conventions 18 Trapeze Regulatory Information
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2007-03-30 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 | Effective |
2007-03-30
|
||||
1 | Applicant's complete, legal business name |
Juniper Networks, Inc.
|
||||
1 | FCC Registration Number (FRN) |
0004536603
|
||||
1 | Physical Address |
1133 Innovation Way
|
||||
1 |
Sunnyvale, California 94089
|
|||||
1 |
United States
|
|||||
app s | TCB Information | |||||
1 | TCB Application Email Address |
c******@curtis-straus.com
|
||||
1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 | Grantee Code |
QZE
|
||||
1 | Equipment Product Code |
150
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 | Name |
M******** G********
|
||||
1 | Title |
Sr. Manager Compliance Engineering
|
||||
1 | Telephone Number |
(408)********
|
||||
1 | Fax Number |
(408)********
|
||||
1 |
m******@juniper.net
|
|||||
app s | Technical Contact | |||||
1 | Firm Name |
Advance Data Technology Corporation (Hwa Ya)
|
||||
1 | Name |
G**** C****
|
||||
1 | Physical Address |
No. 19, Hwa Ya 2nd Rd., Kwei Shan Hsiang
|
||||
1 |
Taoyuan Hsien, 333
|
|||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
G******@adt.com.tw
|
|||||
app s | Non Technical Contact | |||||
1 | Firm Name |
Advance Data Technology Corporation
|
||||
1 | Name |
S******** H****
|
||||
1 | Physical Address |
No. 19, Hwa Ya 2nd Rd., Kwei Shan Hsiang
|
||||
1 |
Taoyuan Hsien, 333
|
|||||
1 |
Taiwan
|
|||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
s******@adt.com.tw
|
|||||
app s | Confidentiality (long or short term) | |||||
1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 | Equipment Class | DTS - Digital Transmission System | ||||
1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 2.4GHz Access Point | ||||
1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 | Modular Equipment Type | Does not apply | ||||
1 | Purpose / Application is for | Original Equipment | ||||
1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 | Grant Comments | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End -users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 | Firm Name |
Bureau Veritas CPS (H.K.) Ltd. Taoyuan Branch
|
||||
1 | Name |
R****** C******
|
||||
1 | Telephone Number |
886-3******** Extension:
|
||||
1 | Fax Number |
886-3********
|
||||
1 |
r******@tw.bureauveritas.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0720000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC