|
app
s
|
Applicant Information
|
|
|
1 2 3 4
|
Effective |
2014-11-07
|
|
1 2 3 4
|
2013-10-31
|
|
1 2 3 4
|
2013-10-22
|
|
1 2 3 4
|
Applicant's complete, legal business name |
Juniper Systems, Inc.
|
|
1 2 3 4
|
FCC Registration Number (FRN) |
0017084591
|
|
1 2 3 4
|
Physical Address |
1132 W 1700 N
|
|
1 2 3 4
|
Logan, Utah 84321
|
|
1 2 3 4
|
United States
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4
|
TCB Application Email Address |
j******@acstestlab.com
|
|
1 2 3 4
|
TCB Scope |
B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27
|
|
1 2 3 4
|
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4
|
Grantee Code |
VSF
|
|
1 2 3 4
|
Equipment Product Code |
23795
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4
|
Name |
G******** D******** S********
|
|
1 2 3 4
|
Title |
Chief Technology Officer
|
|
1 2 3 4
|
Telephone Number |
435-7********
|
|
1 2 3 4
|
Fax Number |
435-7********
|
|
1 2 3 4
|
E-mail |
g******@junipersys.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
| 1 2 3 4 | Yes |
| 1 2 3 4 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 | Equipment Class | PCB - PCS Licensed Transmitter |
| 1 2 3 4 | JBP - Part 15 Class B Computing Device Peripheral |
| 1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | GSM/GPRS/UMTS/HSPA Module |
| 1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment |
| 1 2 3 4 | Change in identification of presently authorized equipment. Original FCC ID: QIPPH8-P Grant Date: 10/21/2011 |
| 1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 | Grant Comments | Output power listed is peak conducted. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. This OEM module is approved for use in products operating as fixed or portable transmitting device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. Antenna gain must meet RF exposure and max radiated output power limits of the applicable rule section. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The max. antenna gain for this device as reported to the FCC is: 0.89 dBi (850MHz) and 1.6 dBi (1900MHz).
Class II Change to address co-location with FCC ID: VSF23545 in the Allegro2 portable host. The highest reported SAR for body-worn accessory and simultaneous transmission exposure conditions are 1.28 W/kg and 1.46 W/kg. |
| 1 2 3 4 | Output power listed is peak conducted. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. This OEM module is approved for use in products operating as fixed or portable transmitting device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. Antenna gain must meet RF exposure and max radiated output power limits of the applicable rule section. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The max. antenna gain for this device as reported to the FCC is: 0.89 dBi (850MHz) and 1.6 dBi (1900MHz).
Class II Change to address co-location with FCC ID: VSF23545 in a portable host.
The highest reported SAR for body-worn accessory and simultaneous transmission exposure conditions are 1.00 W/kg and 1.53 W/kg. |
| 1 2 3 4 | Output power listed is peak conducted. This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations. This OEM module is approved for use in products operating as fixed or portable transmitting device. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. A separate approval is required for portable operating configurations, as defined in 2.1093 of the rules. The final product operating with this transmitter must include operating instructions and applicable warnings for endusers and installers to satisfy RF exposure compliance requirements. Antenna gain must meet RF exposure and max radiated output power limits of the applicable rule section. This Grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. The max. antenna gain for this device as reported to the FCC is: 0.89 dBi (850MHz) and 1.6 dBi (1900MHz). |
| 1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4
|
Firm Name |
TUV SUD America, Inc.
|
|
1 2 3 4
|
Advanced Compliance Solutions, Inc.
|
|
1 2 3 4
|
Name |
S**** W******
|
|
1 2 3 4
|
R****** A******
|
|
1 2 3 4
|
Telephone Number |
678-3********
|
|
1 2 3 4
|
561-9********
|
|
1 2 3 4
|
770-8********
|
|
1 2 3 4
|
Fax Number |
678-3********
|
|
1 2 3 4
|
770-8********
|
|
1 2 3 4
|
E-mail |
s******@tuvam.com
|
|
1 2 3 4
|
s******@acstestlab.com
|
|
1 2 3 4
|
r******@acstestlab.com
|
|