FCC ID: K44515050 Communication Module

Aug. 10th 2022 MODEL: W0C-430, FCC ID: K44515050, IC: 282F-515050 To whom it may concern:

Since the module is too small to put the FCC and ISED ID even with the font size 4 point. Please contact me if you require any additional information. Sincerely, Kazuyoshi Akaike Business Management Division 1-16-2, Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-8525 Japan

Date: Sep. 15, 2022 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD RE: LETTER FOR CLASS II PERMISSIVE CHANGE To whom it may concern:

We, JVC Kenwood Corporation, request Class II permissive change since an authorized device (FCC ID: K44515050) has changed to add the new host device without any hardware / Software changes.

(Original Grant date: 08/24/2022) Adding New Host product, VP8000-F2 and VP8000-F3 including portable RF Exposure condition. Changing antenna trace design described in technical documents. If you have questions, please contact the undersigned. Sincerely, Company Name: JVCKENWOOD Corporation Company Address: 1-16-2, Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-8525 Japan Contact Person Name (in print): Kazuyoshi Akaike

Date : Nov. 09, 2017 Rev : 3.0 FCC Confidentiality Request Letter HACS-F003 FCC Confidentiality Request Letter HCT America LLC

(TCB@hctamerica.com) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 1 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC Date : Nov. 09, 2017 Rev : 3.0 REVISION TABLE Rev 1.0 2.0 2.1 2.2 3.0 Description of Change Original Release(Obsolete) Updated template(Obsolete) Updated address(Obsolete) Updated address Updated LTC and STC Confidentiality table Date 06/14/2012 10/01/2012 01/10/2014 11/18/2016 11/09/2017 Approved QM QM QM QM QM HACS-F003 FCC Confidentiality Request Letter HCT America LLC

(TCB@hctamerica.com) 1726 Ringwood Avenue San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 2 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC DATE : September 15, 2022 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD SUBJECT : Request for Confidentiality for FCC ID : K44515050 We hereby request confidential treatment of the information accompanying this application as outlined below:

LONG-TERM AND SHORT-TERM CONFIDENTIAL LIST LONG-TERM CONFIDENTIAL Exhibit 1 2 Description Antenna Specification Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Signed by:

Company Name : JVCKENWOOD Corporation Company Address : 1-16-2, Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-

Contact Person Name (in print) : Kazuyoshi Akaike/

8525 Japan HACS-F003 FCC Confidentiality Request Letter Rev : 3.0

FCC ID: K44515000 IC: 282F-515000 Difference between the VP8000-F3 and VP8000-F2. There is no difference in the radio unit. Therefore, it does not affect the test results. The difference point is number of key only. Model name Basic model VP8000-F3 Additional model VP8000-F2 Differential Full Key Standard Key

<Key type>

Basic VP8000-F3 Additional VP8000-F2 Kazuyoshi Akaike Business Management Division JVCKENWOOD Corporation

Date : Jul. 16, 2018 Rev : 3.2 Modular Approval Declaration Letter HACS-F007 Modular Approval Declaration Letter HCT America LLC

(TCB@hctamerica.com) 1726 Ringwood Ave., San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 1 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC Date : Jul. 16, 2018 Rev : 3.2 REVISION TABLE Rev 1.0 2.0 2.1 3.0 3.1 3.2 Description of Change Original Release(Obsolete) Updated Template(Obsolete) Updated address (Obsolete) Updated Template(Obsolete) Updated Address Changed File Name and Split Files FCC/IC Date 06/14/2012 10/01/2012 01/10/2014 03/30/2015 06/21/2018 7/16/2018 Approved QM QM QM QM QM QM HACS-F007 Modular Approval Declaration Letter HCT America LLC

(TCB@hctamerica.com) 1726 Ringwood Ave., San Jose, CA 95131 TEL: +1.510.933.8848, Fax: +1.510.933.8849 Page 2 of 2 This document is electronically controlled. Hard copy documents are uncontrolled. Please check all hard copies against the controlled electronic copy to ensure validity. This document is the confidential property of HCT America LLC. It may not be forwarded or reproduced in whole or in part without written permissions from HCT America LLC Date : 8/29/2022 FCC Modular Approval Attestation FCC ID: K44515050 is seeking FCC equipment authorization as Single Modular Transmitter Single Limited Modular Transmitter Product Information Product Description:

Communication Module Model Name(s):

W0C-0430 FRN:

0008154510 FCC Product ID:

FCC Module ID:

K44515050 Modular Checklist/Information For Modular Approval, the module shall meet all the requirements listed below. Please check () if the module complies with the stated requirement. The modular transmitter must have its own shielding. The modular transmitter must have buffered modulation/data inputs. The modular transmitter must have its own power supply regulation. The modular transmitter must comply with the antenna requirements of section 15.203 and 15.204(c). The modular transmitter must tested in a stand-alone configuration. The modular transmitter must be labeled with its own FCC ID number. The modular transmitter must comply with any specific rule or operating requirements applicable to the transmitter and the manufacturer must provide adequate instruction along with the module to explain any such requirements. The modular transmitter must comply with any applicable RF exposure requirements. If a module(s) does NOT meet one or more of the above listed requirements, the applicant may request Limited Modular Approval (LMA). For LMA, please state details about why the above requirement(s) could not be met; and state how control of the end product, into which the module will be installed, will be maintained by the applicant / manufacturer, such that full compliance of the end product is always ensured:

___________________________________ Company Name: JVCKENWOOD Corporation Company Address: 1-16-2, Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-8525 Contact Name : Kazuyoshi Akaike Japan HACS-F007-1 FCC Modular Approval Declaration Letter Rev : 3.2

Aug. 10th, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Attn: Reviewing Engineer RE: LETTER OF AGENT AUTHORIZATION To whom it may concern:

We, the undersigned, hereby authorize any individual within HCT Co.,Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988,21 U.S.C.862. This agreement expires one year from the current date. Sincerely, Kazuyoshi Akaike Business Management Division 1-16-2, Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-8525 Japan

July 21, 2022 Federal Communications Commission Authorization and Standards Division 7435 Oakland Mills Road Columbia, MD 21046 Re: Change of Identification Authorization Reference: FCC ID: VPYLBEE5HY1MW To whom it may concern:

This letter grants authorization for JVCKENWOOD Corporation to apply to the FCC for a change in identification as specified under 47FR section 2.933 of the FCC rules. This authorization applies to Murata Manufacturing Co., Ltd., Model LBEE5HY1MW, FCC ID: VPYLBEE5HY1MW, originally grant date May 24, 2018 and May 25, 2018. We are aware that JVCKENWOOD Corporation intends to market the above referenced products under JVCKENWOOD Corporations own FCC ID:

K44515050. Sincerely yours,

(Signature) NameKenji Hayashikoshi PositionSenior Manager Team/partDevelopment Sec Murata Manufacturing Co., Ltd

Change of Identification Request Letter July 11, 2022 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Original FCC ID: VPYLBEE5HY1MW / Grant Date: May 25, 2018 / Murata Manufacturing Co., Ltd., Change in FCC ID: K44515050 / JVCKENWOOD Corporation To whom it may concern:

This Change of Identification request applies for a new FCC ID according to 47CFR 2.933(b). This application by JVCKENWOOD Corporation will have new FCC ID: K44515050 under JVCKENWOOD Corporation grantee code for purpose of installation of our host product. The original grant of Murata Manufacturing Co., Ltd., is still remain in effect. Per KDB 249634, 1. Party A(JVC KENWOOD Corporation) Grantee Code: K44 / FRN: 0008154510 2. The equipment is electrically identical, there is no any changes in the design, circuitry or construction and original test results continue to be representative of and applicable to this equipment [FCC ID:

K44515050]. Thank you for your attention in this matter. Authorized by, Company Name : JVCKENWOOD Corporation Company Address : 1-16-2, Hakusan, Midori-ku, Yokohama-shi, Kanagawa, 226-8525 Japan Contact Person Name (in print) : Kazuyoshi Akaike /