KTI-5 NETWORK BOX INSTRUCTION MANUAL MODULE RSEAU MODE DEMPLOI UNIDAD DE RED MANUAL DE INSTRUCCIONES INTERFACCIA IP NETWORK MANUALE DI ISTRUzIONI NETzWERK INTERFACE BEDIENUNgSANLEITUNg NETWERK EENHEID gEBRUIKSAANWIjzINg NETWORK BOX KULLANIM KILAVUzU B5A055500 (M) One or more of the following statements may be applicable:
FCC WARNING This equipment generates or uses radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved by the party responsible/jVC KENWOOD. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. INFORMATION TO THE DIGITAL DEVICE USER REQUIRED BY THE FCC This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can generate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Authorized Representative in Europe:
Amsterdamseweg 37, 1422 AC Uithoorn, The Netherlands Manufacturer:
1162 Hakusan, Midoriku, Yokohamashi, Kanagawa, 2268525 Japan Thank you We are grateful you chosen kEnWooD network box. Warning Do not install the unit in explosive atmospheres (inflammable gas, dust particles, metallic powders, grain powders, etc.). PrECauTionS This unit operates in 13.6 V negative ground systems only!. Check Do not expose the unit to rain or moisture; to prevent fire or electric Do not open the unit under any circumstances; to avoid risk of Do not expose the unit to long periods of direct sunlight, nor place it Do not place the unit in excessively dusty and/or humid areas, nor on voltage of DC power supply before installing the unit. shock. electric shock. close to heating appliances. unstable surfaces. If you detect an abnormal odor or smoke coming from the unit, disconnect the power from the unit immediately. Contact your KENWOOD service center or dealer. information on Disposal of old Electrical and Electronic Equipment (applicable for countries that have adopted separate waste collection systems) Products with the symbol (crossed-out wheeled bin) cannot be disposed as household waste. Old electrical and electronic equipment should be recycled at a facility capable of handling these items and their waste byproducts. Contact your local authority for details in locating a recycle facility nearest to you. Proper recycling and waste disposal will help conserve resources whilst preventing detrimental effects on our health and the environment. 1 unPaCking anD ChECking EQuiPMEnT note: The following unpacking information is for use by your kEnWooD dealer, an authorized kEnWooD service center, or the factory. Carefully unpack the unit. We recommend that you identify the items listed in the following table before discarding the packing material. If any items are missing or have been damaged during shipment, file a claim with the carrier immediately. item N SYNC Cable Cushion Cushion Instruction Manual Part number E30-7717-XX G1D-0077-XX G13-2339-XX B5A-0555-XX Quantity 1 2 4 1 inSTallaTion & ConnECTion note: Please consult your dealer for installing the KTI-5 and repeater. To External DC Power supply KTI-5 IP NETWORK ROUTER HUB NXR-710/810 N S Y N C Supplied N SYNC Cable
(Length: 1 m) Can be used with either connector 2 Attach the KTI-5 to the repeater Accessory Cabinet using the supplied cushion. 1. Attach 4 cushions on the 4 base corners of the KTI-5, and place it into 2. Attach the cushion to the base of the KTI-5, and attach it to the the Accessory Cabinet. Accessory Cabinet. Cushion Cushion Cushion oriEnTaTion rear Panel Indicator Indicators (LAN) DC Power supply connector cable (length: 2 m) Connect to an external DC power supply. n SynC jack Connect to Repeater. lan jack Connect to Ethernet. Use a shielded, Category 5e or higher micro uSB connector This connector is currently not used. ConTrol i/o connector This connector is currently not used. standard LAN cable shorter than 3 meters. 3 indicators indicator STATUS LAN : Right
(100Mbps) LAN : Left
(Link) Color Green Green/ Red/
Yellow/ Blue/
Purple Green Green Meaning Lights while the power is ON. Indicates status condition. Lights when in 100Base-TX mode. Lights when link effective. Blinks when carrier sense operation. 4 2015 JVC KENWOOD Corporation