all | frequencies |
|
|
|
|
|
|
|
exhibits | applications |
---|---|---|---|---|---|---|---|---|---|---|
manuals | photos | label |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 |
|
05 Short-Term Confidential User Manual-1 | Users Manual | 2.83 MiB | September 29 2022 / January 08 2023 | delayed release | ||
1 2 3 4 |
|
05 Short-Term Confidential User Manual-2 | Users Manual | 1.77 MiB | September 29 2022 / January 08 2023 | delayed release | ||
1 2 3 4 |
|
04 Short-Term Confidential Internal Photo | Internal Photos | 774.75 KiB | September 29 2022 / January 08 2023 | delayed release | ||
1 2 3 4 |
|
04 Short-Term Confidential External Photo 1 | External Photos | 309.75 KiB | September 29 2022 / January 08 2023 | delayed release | ||
1 2 3 4 |
|
04 Short-Term Confidential External Photo 2 | External Photos | 327.47 KiB | September 29 2022 / January 08 2023 | delayed release | ||
1 2 3 4 |
|
04 Short-Term Confidential External Photo 3 | External Photos | 309.49 KiB | September 29 2022 / January 08 2023 | delayed release | ||
1 2 3 4 | ID Label/Location Info | September 29 2022 | ||||||
1 2 3 4 |
|
01 FCC 2.911(d)(5) Attestation | Attestation Statements | 324.53 KiB | September 07 2023 | |||
1 2 3 4 |
|
01 FCC Agent Attestation Agent | Attestation Statements | 41.11 KiB | September 07 2023 | |||
1 2 3 4 |
|
01 FCC Agent Attestation Applicant | Attestation Statements | 322.52 KiB | September 07 2023 | |||
1 2 3 4 |
|
02 FCC Authorization Letter | Cover Letter(s) | 316.40 KiB | September 07 2023 | |||
1 2 3 4 |
|
02 FCC Class II Permissive Change Letter | Cover Letter(s) | 323.65 KiB | September 07 2023 | |||
1 2 3 4 |
|
02 FCC Request for Confidentiality Letter | Cover Letter(s) | 342.03 KiB | September 07 2023 | |||
1 2 3 4 |
|
03 FCC RF Exposure | RF Exposure Info | 20.50 KiB | September 07 2023 | |||
1 2 3 4 |
|
03 FCC Test Report DSS | Test Report | 2.52 MiB | September 07 2023 | |||
1 2 3 4 |
|
03 FCC Test Setup Photo DSS | Test Setup Photos | 155.31 KiB | September 07 2023 | |||
1 2 3 4 | 04 Confidential Theory of Operation Response to Inquiry to FCC | Operational Description | September 07 2023 | confidential | ||||
1 2 3 4 | Cover Letter(s) | September 29 2022 | ||||||
1 2 3 4 | Test Report | September 29 2022 | ||||||
1 2 3 4 |
|
03 FCC RF Exposure DTS | RF Exposure Info | 25.45 KiB | September 29 2022 | |||
1 2 3 4 |
|
03 FCC Test Report DTS | Test Report | 2.17 MiB | September 29 2022 | |||
1 2 3 4 |
|
03 Short-Term Confidential FCC Test Setup Photo DTS | Test Setup Photos | 388.85 KiB | September 29 2022 / January 08 2023 | delayed release | ||
1 2 3 4 |
|
03 Short-Term Confidential Test Setup Photo - Antenna | Test Setup Photos | 1.90 MiB | September 29 2022 / January 08 2023 | delayed release | ||
1 2 3 4 | 07 Confidential Block Diagram | Block Diagram | September 29 2022 | confidential | ||||
1 2 3 4 | 07 Confidential Block Diagram RF | Block Diagram | September 29 2022 | confidential | ||||
1 2 3 4 | 08 Confidential Theory of Operation | Operational Description | September 29 2022 | confidential | ||||
1 2 3 4 | 08 Confidential Theory of Operation-Differences | Operational Description | September 29 2022 | confidential | ||||
1 2 3 4 | 09 Confidential Schematics | Schematics | September 29 2022 | confidential | ||||
1 2 3 4 |
|
03 FCC RF Exposure DSS | RF Exposure Info | 29.33 KiB | September 29 2022 | |||
1 2 3 4 |
|
03 Short-Term Confidential FCC Test Setup Photo DSS | Test Setup Photos | 369.87 KiB | September 29 2022 / January 08 2023 | delayed release | ||
1 2 3 4 |
|
03 FCC RF Exposure NII | RF Exposure Info | 26.32 KiB | September 29 2022 | |||
1 2 3 4 |
|
03 FCC Test Report NII | Test Report | 3.79 MiB | September 29 2022 | |||
1 2 3 4 |
|
03 Short-Term Confidential FCC Test Setup Photo NII | Test Setup Photos | 386.28 KiB | September 29 2022 / January 08 2023 | delayed release | ||
1 2 3 4 | 08 Confidential Theory of Operation-Channel List | Operational Description | September 29 2022 | confidential | ||||
1 2 3 4 | 08 Confidential Theory of Operation-Software Security | Operational Description | September 29 2022 | confidential |
1 2 3 4 | 05 Short-Term Confidential User Manual-1 | Users Manual | 2.83 MiB | September 29 2022 / January 08 2023 | delayed release |
MONITOR WITH RECEIVER INSTRUCTION MANUAL DMX809S DMX8709S ENGLISH This instruction manual is used to describe the models listed above. Model availability and features (functions) may differ depending on the country and sales area. Take the time to read through this instruction manual. Familiarity with installation and operation procedures will help you obtain the best performance from your new receiver. For your records Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model DMX809S/DMX8709S Serial number US Residents Only Register your Kenwood product at https://www.kenwood.com/usa/
Register Online 2022 JVCKENWOOD Corporation B5A-4045-00 (KN) 00_DMX_809S_KN.indb 1 00_DMX_809S_KN.indb 1 2022/07/15 13:00 2022/07/15 13:00 Important Notice Important Notice To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGS and CAUTIONS in this manual. Please keep the manual in a safe and accessible place for future reference. WARNINGS To prevent accidents and damages DO NOT install any unit or wire any cable in a CAUTIONS To care for the unit If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit. To care for the monitor The monitor built into this unit has been produced with high precision, but it may have some ineffective dots. This is inevitable and is not considered defective. location where;
it may obstruct the steering wheel and gearshift Do not expose the monitor to direct sunlight. Do not operate the touch panel using a ball-point lever operations. pen or similar tool with a sharp tip. it may obstruct the operation of safety devices such Touch the keys on the touch panel with your finger as air bags. it may obstruct visibility. DO NOT raise the volume level too much, as this will make driving dangerous by blocking outside sounds, and may cause hearing loss. DO NOT operate the unit while driving. If you need to operate the unit while driving, be sure to look around carefully. Stop the car before performing any complicated operations. The driver must not watch the monitor while driving. directly (if you are wearing a glove, take it off). When the temperature is very cold or very hot... Chemical changes occur inside, causing malfunction. Pictures may not appear clearly or may move slowly. Pictures may not be synchronized with the sound or picture quality may decline in such environments. On the volume setting Digital devices produce very little noise compared with other sources. Lower the volume before playing these digital sources to avoid damaging the speakers by sudden increase of the output level. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. i ENGLISH 00_DMX_809S_KN.indb i 00_DMX_809S_KN.indb i 2022/07/15 13:00 2022/07/15 13:00 Important Notice Important Notice Suppliers Declaration of Conformity Trade Name:
Products:
Model Name:
Responsible Party: JVCKENWOOD USA CORPORATION KENWOOD MONITOR WITH RECEIVER DMX809S/DMX8709S 4001 Worsham Avenue, Long Beach, CA 90808, U.S.A. PHONE: 1-800-252-5722 CAUTION This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from persons body. About GPS When you turn on this unit for the first time, you must wait while the system acquires GPS signals from satellites. This process could take up to several minutes. Make sure your vehicle is outdoors in an open area away from tall buildings and trees for fastest acquisition. Once the system acquires GPS signals, this unit will acquire them quickly each time you turn on this unit. THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. ISED Caution This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. 00_DMX_809S_KN.indb ii 00_DMX_809S_KN.indb ii About this manual The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels. This manual mainly explains operations using the buttons on the monitor panel and keys on the touch panel. For operations using the remote controller, see page 53.
< > indicates the various screens/menus/
operations/settings that appear on the touch panel.
[ ] indicates the keys and source names on the touch panel. Indication language: English indications are used for the purpose of explanation. You can select the indication language from the <Setup> menu
(page 50). This symbol on the product means there are important operating and maintenance instructions in this manual. Be sure to carefully read instructions in this manual. ENGLISH ii 2022/07/15 13:00 2022/07/15 13:00 Contents Contents Component Names and Basic Operations ..... 3 Monitor panel ....................................................................................3 Home screen ......................................................................................3 Turning on the power ..................................................................3 Turning off the power ..................................................................3 Putting the unit in standby .......................................................4 Turning off the screen ..................................................................4 Adjusting the volume ...................................................................4 Attenuating the sound ................................................................4 Initial settings .....................................................................................4 Date and clock settings ...............................................................5 In-Car Connections ............................................. 6 USB connection ................................................................................6 Bluetooth connection ................................................................7 Connections setting ................................................................... 11 Various Screens and Operations ...................12 Source/option selection screen .......................................... 12 Source control screen ................................................................ 13 List/setting screen........................................................................ 14 Apps ....................................................................14 Using Apps of iPhone Apple CarPlay ........................ 14 Using the Apps of an Android device Android Auto ........................................................................ 16 Using the Apps of an Android device USB Mirroring ........................................................................... 17 USB ......................................................................18 Playback operations .................................................................... 18 Video playback operations ..................................................... 19 Search operations ........................................................................ 20 Settings for USB playback ....................................................... 21 HD Radio (for DMX809S) ..............................21 About HD Radio Technology ............................................ 21 Listening to the radio................................................................. 22 Changing the receive mode ................................................. 23 Presetting stations in the memory .................................... 23 Selecting a preset station ........................................................ 24 Using Emergency Alert ............................................................. 24 Radio (for DMX8709S) .....................................25 Listening to the radio................................................................. 25 Presetting stations in the memory .................................... 26 Selecting a preset station ........................................................ 27 SiriusXM Satellite Radio ........................... 27 Listening to the SiriusXM Satellite Radio ..................... 28 Selecting a channel ..................................................................... 29 Presetting channels in the memory ................................. 29 Selecting a preset channel ..................................................... 30 Replaying content ....................................................................... 30 SiriusXM Satellite Radio features ......................................... 30 Content Alert................................................................................... 31 Setting reception restrictions ............................................... 33 Resetting the SiriusXM Satellite Radio settings ......... 34 Other External Components ..........................35 HDMI/AV-IN devices ................................................................... 35 Cameras .............................................................................................. 35 Using an external component via ADS adapter OEM Features........................................................................... 36 Bluetooth Device ............................................37 Bluetooth mobile phone ......................................................... 37 Bluetooth mobile phone settings ...................................... 39 Bluetooth audio player ............................................................. 40 Settings ..............................................................42 Audio settings ................................................................................ 42 Display settings .............................................................................. 46 Input settings .................................................................................. 48 System settings.............................................................................. 50 Remote Controller ............................................52 Preparation ....................................................................................... 52 Basic operations for KCA-RCDV340 ................................... 53 Installation and Connection ...........................54 Before installation ........................................................................ 54 Installing the unit.......................................................................... 56 Removing the unit ..........................................................56 Installing the supplied GPS antenna ................................ 57 Connecting external components .................................... 58 Wiring connection ....................................................................... 59 References .........................................................60 Maintenance ................................................................................... 60 More information ......................................................................... 60 Troubleshooting ...............................................62 Specifications ....................................................66 Trademarks and Licenses ................................68 Important Notice on Software ............................................. 69 EULA ..................................................................................................... 70 2 ENGLISH 00_DMX_809S_KN.indb 2 00_DMX_809S_KN.indb 2 2022/07/15 13:00 2022/07/15 13:00 Component Names and Basic Operations Component Names and Basic Operations Monitor panel 1 2 3 4 5 6 7 6 VOICE button: (Press) Activates the voice recognition. When no device for Apple CarPlay, Android Auto, and Bluetooth phone is connected, pressing and holding this button displays Bluetooth pairing waiting dialog (page 7). 7 VOL J/K buttons 8 USB terminal from the rear panel The buttons on the monitor illuminate and change the color periodically with the unit turned on. To change the color, see page 47. Touching the operation keys performs the following actions:
1 Displays the control screen of current source. 2 Displays the source/option selection screen. 3 Short-cut playback source icons 4 Displays the Hands Free screen when a Bluetooth phone is connected. When connected as Apple CarPlay or Android Auto, it works as a phone provided in Apple CarPlay or Android Auto. Turning on the power
(USB1)5V 1.5A 8 Home screen 1 Remote sensor 2 Screen (touch panel) 3 Monitor panel 4 HOME button
(Press): Turns on the power.
(Hold): Turns off the power. HOME
(Press): Displays the Home screen (see the following) while the power is on. 5 MENU/DISP OFF button MENU (Press): Pops up the function menu
(page 13). DISP OFF (Hold): Turns off the screen. 00_DMX_809S_KN.indb 3 00_DMX_809S_KN.indb 3 You can customize the Home screen (page 48). To display the Home screen from other screens, press the HOME button. Jan. Jan. 98.3 MHz HD Radio Apple CarPlay Android Auto TEL Eg. Home screen for DMX809S When you turn on this unit for the first time, you must wait while the system acquires GPS signals from satellites. This process could take up to several minutes. Turning off the power
(Hold) ENGLISH 3 2022/07/15 13:00 2022/07/15 13:00 Component Names and Basic Operations Component Names and Basic Operations Putting the unit in standby Adjusting the volume Initial settings 1 Display the source/option selection screen. From the Home screen (page 3), touch as follows:
You can adjust the volume (00 to 40) by pressing VOL J to increase and pressing VOL K to decrease. When volume level is below 15, holding VOL J increases the volume continuously to level 15. 2 Put the unit in standby. Attenuating the sound On the source/option selection screen (page 12):
On the source control screen:
To cancel attenuation:
Turning off the screen On the monitor panel To turn on the screen: Press the DISP OFF button on the monitor panel or touch the screen.
(Hold) On the pop-up menu To turn on the screen: Touch the screen. When you power on the unit for the first time or initialized, the <Initial Setup> screen appears. Perform the initial settings. Initial Setup Demonstration Language Front Camera Rear Camera User Customize Viewing Angle ON OFF English Enter Enter Enter Enter Enter Finish Once completed, Home screen appears.
<Demonstration> (page 48) ON (Initial): Activates the display demonstration. OFF: Deactivates the display demonstration.
<Language> (page 50) Select the text language used for on-screen information. English (Initial)/Espaol/Franais GUI Language (Local (the language selected above)
(Initial)/English): Selects the language used for displaying operation keys and menu items.
<Front Camera> (page 48) Make the settings to display the picture from the connected front view camera. 4 ENGLISH 00_DMX_809S_KN.indb 4 00_DMX_809S_KN.indb 4 2022/07/15 13:00 2022/07/15 13:00 Component Names and Basic Operations Component Names and Basic Operations
<Rear Camera> (page 49) Make the settings to display the picture from the connected rear view camera.
<User Customize> (page 47) Change the display design.
<Viewing Angle> (page 48) Select the viewing angle in relation to the monitor to make the image on the screen easier to see. Under 0 (Initial)/5/10/15/20 Date and clock settings 1 Display the Home screen. 2 Display the <Setup> screen. From the Home screen (page 3), touch as follows:
3 Display the <System> screen (1), and then enter the item-setting screen you want to change (2). Setup Audio Language English Display Clock Input Time Format System Time Zone Clock Adjust Enter Enter Enter Enter Eg. When selecting <Clock>
4 Set or adjust the date and clock items.
<Clock>*
Select the method to set the date and clock. GPS-SYNC (Initial): Synchronizes the clock time with GPS. Manual: Sets the clock manually using <Clock Adjust>. See the following.
<Time Format>
Select the time display format.
[12-Hour] (Initial)/[24-Hour]
<Time Zone>
Select the time zone for your residential area. Pacific Time (Initial)/Central Time/Mountain Time/Eastern Time, etc.
<Clock Adjust>
Touch [J]/[K] (1) to adjust the date (year/month/
date), and adjust the hour/minute. Touch [SET] (2) to finish setting the clock. Clock Adjust Year Month Date Hour Minute 2022
1
1 AM4
1 SET
<Daylight Saving Time>
(Not used when the clock is set manually) Activate this by selecting the additional time for Daylight Saving Time (if available in your residential area). OFF (Initial)/30min/1Hr
* You can also display the <Clock> screen by touching the clock area if shown on the Home screen. 00_DMX_809S_KN.indb 5 00_DMX_809S_KN.indb 5 ENGLISH 5 2022/07/15 13:00 2022/07/15 13:00 In-Car Connections In-Car Connections To operate your smartphone hands-free, and Apps of the smartphone (Apple CarPlay, Android Auto, and USB MIrroring), the following connnections are required. For Wired Apple CarPlay (page 14), connect For USB Mirroring (page 17) connect the Android device both with USB and Bluetooth. For Hands-Free Phone (page 37), and Bluetooth audio player (page 40), connect your device with Bluetooth. For SiriusXM Connect Vehicle Tuner connection and its usage, see pages 27 and 58. For ADS adapter connection and its usage, see pages 36 and 58. For HDMI device connection and its usage, see pages 35 and 58. For AV-IN device connection and its usage, see pages 35 and 58. iPhone with USB. For Wireless Apple CarPlay (page 14), connect iPhone with Bluetooth (Wi-Fi is auto-connected). For Android Auto (page 16):
Android device with Android version 6.0 or later can be used with USB (In this case, Bluetooth is auto-connected, but Wi-Fi is not available) To wirelessly use Android Auto with this unit, connect Android device with Bluetooth (Wi-Fi is auto-connected) You need a compatible Android device (see below) with an active data plan. An Android device with Android version 11 or later and 5 GHz Wi-Fi (subject to local regulations*); or A Google-branded or Samsung-branded device with Android version 10; or A Samsung Galaxy S8, Galaxy S8+ or Note 8, with Android 9 You can find more information at
<g.co/androidauto/requirements>.
* Refer to the local regulations of your residential area. USB connection Connect your smartphone (iPhone or Android device) for using Apps on the screen of this unit. You can also connect a USB mass storage class device such as a USB memory, digital audio player, etc. to the unit. But you cannot connect a PC, portable HDD and USB hub. iPhone/Android device A B USB device
(USB1)5V 1.5A USB terminal from the rear panel A For connecting your Android device, use the USB cable (commecially available) B For connecting your iPhone, use the USB cable for iPhone KCA-iP103 (optional accessory) 6 ENGLISH 00_DMX_809S_KN.indb 6 00_DMX_809S_KN.indb 6 2022/07/15 13:00 2022/07/15 13:00 In-Car Connections In-Car Connections Bluetooth connection Information for using Bluetooth devices Bluetooth is a short-range wireless radio communication technology for mobile devices such as mobile phones (smartphones), portable PCs, and other devices. Bluetooth devices can be connected without cables and communicate with each other. Some Bluetooth devices may not be used with this unit depending on the Bluetooth version of the device. Pairing a Bluetooth device When you connect a Bluetooth device to the unit for the first time, register the device to this unit (pairing). Pairing allows Bluetooth devices to communicate with each other. The pairing method differs depending on the Bluetooth version of the device. For devices with Bluetooth 2.1:
You can pair the device and the unit using SSP
(Secure Simple Pairing) which only requires confirmation. For devices with Bluetooth 2.0:
You need to enter a PIN code both on the device and the unit for pairing. Once the connection is established, it is registered in the unit until you initialize the Bluetooth settings
(page 50) or the unit itself (page 51). Up to five devices can be registered in total. To use the Bluetooth function, you need to turn on the Bluetooth function of the device. Auto pairing When <Auto Pairing> is set to [ON] (page 40), Bluetooth devices are automatically paired. For iPhone with Apple CarPlay and Android device with Android Auto: When the device is connected via USB, it is automatically paired regardless of this setting. Pairing a Bluetooth device using SSP
(for Bluetooth 2.1) 1 Display the Home screen. 2 Display the <Device List> screen. From the Home screen (page 3), touch as follows:
Automatic Wi-Fi connections This unit is equipped with the Wi-Fi function. You can turn on or off the Wi-Fi function on the
<Wireless SETUP> settings. To use the Wi-Fi function, select [Wi-Fi] (page 51). Once your iPhone or Android device is paired successfully with Bluetooth or connected with USB for Apple CarPlay or for Android Auto, it is automatically connected with Wi-Fi. And from the next time on, it is automatically connected through Wi-Fi. Turn on the Bluetooth and Wi-Fi functions on your iPhone or Android device. It is necessary to connect the GPS antenna in order to use wireless Apple CarPlay. Then, on the <Setup> screen, touch as follows:
[System] <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, touch as follows:
<Device List> : [Enter]
You can also use the pop-up function menu to display the <Device List> screen (page 13). 3 Make the unit ready for pairing. On the <Device List> screen:
Please open Bluetooth settings on your device and select the device name below DMXXXXXXX Cancel 00_DMX_809S_KN.indb 7 00_DMX_809S_KN.indb 7 ENGLISH 7 2022/07/15 13:00 2022/07/15 13:00 In-Car Connections In-Car Connections 4 Search for the unit (DMX809S or DMX8709S) from your Bluetooth device. 5 Confirm the request both on the device and the unit. On the device: Confirmation method varies for the device. On the unit:
BT Pairing request To perform BT Pairing Please confirm the device display DMXXXXXX (device name) 012345 (PIN code) Pair Cancel Pairing is complete. To reject the request: Touch [Cancel]. 6 Register the usage of the Bluetooth device. See Registering the usage of the devices on page 9. Once pairing is completed... For iPhone compatible with wireless Apple CarPlay A confirmation message appears. Touch [Yes] to displays the Apple CarPlay screen for wireless connection. Touch [No] not to use Apple CarPlay for the time being. To use Apple CarPlay, select it on the
<Device List> screen. For Android device compatible with Android Auto When [Android Auto] (initial) is selected for the
<Android Mode Select> setting (page 11), Android Auto is automatically activated, and this Android device is registered as Android Auto device. If Apple CarPlay is active currently, a warning message may appear, asking whether Android Auto or Apple CarPlay is to be used (depending on iPhone version). 8 ENGLISH 00_DMX_809S_KN.indb 8 00_DMX_809S_KN.indb 8 Pairing a Bluetooth device using a PIN code
(for Bluetooth 2.0) 1 Display the Home screen. 2 Display the <PIN Code Set> screen. From the Home screen (page 3), touch as follows:
Then, on the <Setup> screen, touch as follows:
[System] <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, touch as follows:
<PIN Code> : [Enter]
3 Enter the PIN code. PIN Code Set 0000 1 4 7 2 5 8 0 3 6 9 Enter Clear Initial PIN Code: [0000]
If you do not need to change the PIN code [0000], just touch [Enter]. To change the PIN code, see page 11. 2022/07/15 13:00 2022/07/15 13:00 In-Car Connections In-Car Connections 4 Make the unit ready for pairing. On the <Device List> screen:
Please open Bluetooth settings on your device and select the device name below DMXXXXXXX Cancel 5 Search for the unit (DMX809S or DMX8709S) from your Bluetooth device. 6 Select the unit (DMX809S or DMX8709S) on your Bluetooth device. Pairing is complete. 7 Register the usage of the Bluetooth device. See Registering the usage of the devices that follows. Once pairing is completed, see page 8. For iPhone compatible with wireless Apple CarPlay For Android device compatible with Android Auto Registering the usage of the devices You can confirm and change the usage (profile) of the registered devices on the <Device List> screen. You can also connect/disconnect and delete unwanted devices on the device list. 1 Display the <Device List> screen. From the Home screen (page 3), touch as follows:
Then, on the <Setup> screen, touch as follows:
[System] <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, touch as follows:
<Device List> : [Enter]
Device List Device Name 1 Device Name 2 Device Name 3 Device Name 4 Device Name 5 Device Name 6 Touch [ < ] scrolls the text if not all of the text is shown. For list/setting screen operations, see also page 14. 2 Select the device you want to use. Device List Device Name 1 Device Name 2 Device Name 3 Device Name 4 Device Name 5 Device Name 6 When Apple CarPlay or Android Auto is activated for the selected device, it will be disconnected. A warning message appears. Touch [Yes] to continue. 3 Select the profile for the selected device. Please Select a profile TEL(HFP)1 TEL(HFP)2 Audio(A2DP) / APP(SPP) USB Mirroring Close The currently activated (connected) devices are highlighted on the list. Six devices can be displayed on the list; five devices connected by Bluetooth and one by USB. You can also use the pop-up function menu to display the <Device List> screen (page 13).
[TEL(HFP)1]/[TEL(HFP)2]: To use the device as hands-free phone 1 and 2.
[Audio(A2DP)/APP(SPP)]: To use the device as Bluetooth audio or Apps (Apple CarPlay/Android Auto).
[USB Mirroring]: To use the device as USB Mirroring. 00_DMX_809S_KN.indb 9 00_DMX_809S_KN.indb 9 ENGLISH 9 2022/07/15 13:00 2022/07/15 13:00 In-Car Connections In-Car Connections 4 Touch [Close] to finish. The <Device List> screen is displayed again. This unit searches for the device you have just set the usage (profile) for, and activates the device if it is connected. About the profile icons Available profile for the listed devices are in white. When the profile is active for the devices, it becomes blue. Unavailable device and profile are in gray. Bluetooth icon is displayed only when the device is connected by Bluetooth. Apple CarPlay and Android Auto icons illuminate when they are active. Mirroring icon is displayed when the device is selected as Mirroring in profile setting. Icon Profile Status (on/off/unavailable) Bluetooth Bluetooth connection Adding the registered devices 1 Display the <Device List> screen. From the Home screen (page 3), touch as follows:
Deleting the registered devices 1 Display the <Device List> screen. From the Home screen (page 3), touch as follows:
Then, on the <Setup> screen, touch as follows:
[System] <Connections SETUP> : [Enter]
Then, on the <Setup> screen, touch as follows:
[System] <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, touch as follows:
<Device List> : [Enter]
2 Activate registration. On the <Device List> screen:
On the <Connections SETUP> screen, touch as follows:
<Device List> : [Enter]
2 Display the <Device Remove> screen. On the <Device List> screen:
HFP1 Hands-Free phone 1 3 Follow the procedure previously 3 Select the device you want to delete. HFP2 Hands-Free phone 2 A2DP Bluetooth audio player SPP Apps Apple CarPlay Android Auto Apple CarPlay Android Auto Mirroring USB Mirroring 10 ENGLISH 00_DMX_809S_KN.indb 10 00_DMX_809S_KN.indb 10 explained. Pairing a Bluetooth device using SSP
(for Bluetooth 2.1), see page 7. Pairing a Bluetooth device using a PIN code
(for Bluetooth 2.0), see page 8. Device Remove All All CP Device 1 Device 2 Delete Device 3 AAP Device 1 BT Device 1 To select all devices, touch [
To deselect all devices, touch [
]. 4 Touch [Delete]. A warning message appears. Touch [Yes] to delete. 2022/07/15 13:00 2022/07/15 13:00 In-Car Connections In-Car Connections Connections setting You can change various settings for the connected devices. 1 Display the <Connections SETUP> screen. From the Home screen (page 3), touch as follows:
Then, on the <Setup> screen, touch as follows:
[System] <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, you can change and confirm the following item settings. For list/setting screen operations, see also page 14. Connections SETUP Device List PIN Code Enter 0000 Device Name Bluetooth Device Address
(Model name) 00:00:00:00:00:00:00 Initialize TEL SETUP Enter Enter Connections SETUP Wi-Fi Setup Device Audio Control Enter Enter Driving Position Left Right Android Mode Select Reset Android Auto Wireless Connection Enter Enter
<Device List>
Devices connected for Apple CarPlay, Android Auto, USB Mirroring, Bluetooth phone, and Bluetooth audio are listed. You can check their names and their status on the list (page 10).
<PIN Code>
To change the PIN code, enter a new PIN code and touch [Enter] to finish. To correct the PIN code input, touch and hold
[Clear], and re-enter the PIN code. This setting is available only when iPhone with Apple CarPlay is not connected.
<Device Name>
Shows the device name of this unit to be shown on the Bluetooth device DMX809S or DMX8709S.
<Bluetooth Device Address>
Shows the Bluetooth device address of this unit.
<Initialize>
Initialize the Bluetooth settings (page 50).
<TEL SETUP>
See step 2 on page 40. This setting is available only when iPhone with Apple CarPlay is not connected.
<Wi-Fi Setup>
Shows the device name, device address and password of this unit.
<Device Audio Control>
Go to step 2 on page 12.
<Driving Position>
Set your drivers seat portion of your car [LEFT]
(initial) or [RIGHT]. This setting changes the sidebar/button position of Apple CarPlay/Android Auto screens accordingly with the driver seat position. This setting is available only when iPhone with Apple CarPlay and Android device with Android Auto are not connected.
<Android Mode Select>
Select Android device usage for Apps either
[Android Auto] (initial) (page 16) or [Mirroring for Android] (page 17). This setting is available only in Standby Mode with no device connected via USB.
<Reset Android Auto Wireless Connection>
Reset Android Auto wireless connection when you want to change the password for wireless connection manually. The system of this unit is rebooted after touching [Yes]. 00_DMX_809S_KN.indb 11 00_DMX_809S_KN.indb 11 ENGLISH 11 2022/07/15 13:00 2022/07/15 13:00 In-Car Connections In-Car Connections Various Screens and Operations Various Screens and Operations 2 Touch [ENTER] to display the selected item screen. You can display or change to other screens at any time to show information, change the playback source, change the settings, etc. On the <Device Audio Control> screen:
Device Audio Control Guidance/Voice Recognition Volume Phone Incoming Volume Phone Calling/Talking Volume Speech Quality Adjust Media Volume Enter Enter Enter Enter 15
<Guidance/Voice Recognition Volume> can be set separately for <Apple CarPlay> and
<Android Auto> within the range of 00 to 40
(Initial: 19).
<Phone Incoming Volume>, <Phone Calling/
Talking Volume> can be set separately for
<Apple CarPlay> and <Android Auto/
Bluetooth> within the range of 00 to 40 (Initial:
15).
<Speech Quality Adjust>:
<Microphone Level> can be set within the range of 10 to +10 (Initial: 4).
<Echo Cancel Level>, <Noise Reduction Level> can be set within the range of 5 to +5
(Initial: 0).
<Media Volume> can be set within the range of 00 to 40 (Initial: 15). Source/option selection screen
] on the Home screen to display the source/
Touch [
option selection screen. Only the available icons at that time are shown on the screen. Now Playing
[TEL]
[USB]
[HD Radio]
1 Camera Apple CarPlay Android Auto Bluetooth Audio TEL USB 2
[Radio]
Apps SETUP HD Radio SiriusXM USB Mirroring HDMI
[SiriusXM]
2 Source/option keys
[Apple CarPlay] Displays the home screen of Apple CarPlay.
[Android Auto]
Displays the home screen of Android Auto.
[Bluetooth Audio]
Plays a connected Bluetooth audio player. Displays the phone control screen. Plays files on a USB device.
(For DMX809S) Switches to the HD Radio broadcast.
(For DMX8709S) Switches to the radio broadcast. Switches to the SiriusXM radio broadcast. Eg. Source/option selection screen for DMX809S Touching the operation keys performs the following actions:
1 Left-side keys
[Now Playing]
[Camera]
[Apps]
[SETUP]
Displays the control screen of current source. Switches to the camera view
(page 35). Switches to the currently available Apps[Apple CarPlay] or
[Android Auto]. Displays the <Setup> screen
(page 42).
[USB Mirroring] Displays the screen of USB Mirroring.
[HDMI]
[AV-IN]
Switches to the HDMI device. Switches to the external AV component connected to the AV-
IN input terminal.
[STANDBY]
Puts the unit in standby.
[OEM Features]
Switches to the source connected via ADS adapter. 12 ENGLISH 00_DMX_809S_KN.indb 12 00_DMX_809S_KN.indb 12 2022/07/15 13:00 2022/07/15 13:00 Various Screens and Operations Various Screens and Operations To change the page: Touch [ > ] / [ < ]. Current page is shown by the page indication on the top of the screen. To return to the Home screen: Press the HOME button on the monitor panel. Touch [] to scroll the text if not all of the text is Using the pop-up function menu shown. Touch [ < ] to widen the window to show more detailed information. Then touch [ > ] to close the window. 3 Phone control screen indicator Touch to display the phone control screen You can easily access the frequently used features. 1 Display the pop-up function menu. Source control screen
(page 38). You can operate the playback source using the source control screen. The operation keys and information displayed vary for each source. Here the common operation keys are explained. For more about the other operation keys, see the respective page of each source section. 4 Sound attenuating key (page 4) 5 TEL indicator is shown when a hands-free phone is connected. 6 Clock display 7 Operation window tab Touch [ > ] to widen the operation window to show more operation keys besides those shown on the operation key area (q). Then touch [ < ] to close the window. 8 For DMX809S: EA indicator (page 24) 9 For DMX8709S: TI indicator (page 26) p SiriusXM signal strength indicator (page 28) q Operation key area 1 Current playback source icon and name Touch [ > ] to show the source icons on the Home screen. Then touch [ < ] to hide the other icons. 2 Content information area 2 Touch one of the following items you want to use. Standby
Device List] Displays the <Device List>
Screen Adjustment]
Display
OFF]
Camera]
SETUP]
Standby]
screen (page 9). Displays the <Screen Adjustment> screen
(page 48). Turns off the screen. To turn on the display, touch anywhere on the screen. Displays the view from the connected camera (page 35). Displays the <Setup> screen
(page 42). Icon varies depending on current playing source. 00_DMX_809S_KN.indb 13 00_DMX_809S_KN.indb 13 ENGLISH 13 2022/07/15 13:00 2022/07/15 13:00 Various Screens and Operations Various Screens and Operations To close the pop-up function menu: Touch the screen anywhere other than the pop-up function menu. List/setting screen Below are the common operation keys which appear on the list/setting screen. The appearance or location of the operation keys may differ, however the similar operation keys have the same operations. Available operation keys differ depending on the setting screens. Not all these operation keys are shown on every screen. 4 (Not displayed for folder list) Enters alphabet search to list the items in alphabetical order.*2 When a key pad is displayed, follow the procedure below. 1 Touch the first letter you want to search for. To search by a number, touch [1,2,3...]. To search by a symbol, touch [#]. 2 Select your desired item on the search result list. 5 Returns to the root folder.*2 6 Returns to the upper layer.*2 7 Changes the page to display more items. 8 Returns to the previous screen.
*1 Only for Bluetooth Audio
*2 Only for USB Play A-Z Top Up Touching the operation keys performs the following actions:
1 Return to the upper layer.*1 2 Finishes the setting and closes the current screen. 3 Plays all files in the folder containing the current file. 14 ENGLISH 00_DMX_809S_KN.indb 14 00_DMX_809S_KN.indb 14 AppsApps You can use the Apps installed in your iPhone and Android device by using Apple CarPlay, Android Auto, and USB Mirroring. For iPhone: You can use Apple CarPlay (see the following). For Android device: You can use Android Auto
(page 16) and USB Mirroring (page 17). Preparation:
Make sure that the microphone is connected
(page 59). Using Apps of iPhone Apple CarPlay About Apple CarPlay Apple CarPlay is a smarter, safer way to use your iPhone in the car. Apple CarPlay takes the things you want to do with iPhone while driving and displays them on the screen of this unit. You can get directions, make calls, send and receive messages, and listen to the music from iPhone while driving. You can also use Siri voice control to make it easier to operate iPhone. For details about Apple CarPlay, visit
<https://apple.com/ios/carplay/>. 2022/07/15 13:00 2022/07/15 13:00 AppsApps Compatible iPhone devices You can use Apple CarPlay with the following iPhone models. iPhone 6S, 6S Plus, 7, 7 Plus, 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max, SE (1st/2nd generation), 12, 12 mini, 12 Pro, 12 Pro Max, 13, 13 mini, 13 Pro, 13 Pro Max Starting Apple CarPlay Once the wireless setting and connection is done for the first time, the source is automatically changed, and you can use of the Apps of the connected iPhone. Unlock your iPhone beforehand. You cannot use Apple CarPlay when the screen recording function is enabled on the iPhone. Connecting iPhone compatible with Apple CarPlay See pages 6 to 10. To change the source from the others Touch [Apple CarPlay] on the source/option selection screen (page 12). If two iPhone devices compatible with Apple CarPlay are connected wirelessly, the device recognized first is used for Apple CarPlay. To use the other iPhone, select it on the <Device List>. Now Playing Camera Apple CarPlay Android Auto Bluetooth Audio TEL USB Apps SETUP HD Radio SiriusXM USB Mirroring HDMI Eg. Source/option selection screen for DMX809S The Apple CarPlay screen is displayed. Apple CarPlay screen operation You can use the Apps of the connected iPhone. The items displayed and the language used on the screen differ among the connected devices. 1 Application buttons Starts the application. 2 Short cut buttons 3 [
] button
(Touch) Displays the home screen of Apple CarPlay.
(Hold) Activates Siri. 4 [HOME] button*
Exits the Apple CarPlay screen and displays the Home screen.
* This icon design may change depending on the iOS version. To exit the Apple CarPlay screen Touch [HOME] on the Apple CarPlay screen, or press HOME button on the monitor panel. 00_DMX_809S_KN.indb 15 00_DMX_809S_KN.indb 15 ENGLISH 15 2022/07/15 13:00 2022/07/15 13:00 AppsApps Using Siri You can activate Siri while the Apple CarPlay screen is displayed. On the monitor panel:
1 Press the 2 Talk to Siri through the microphone. button on the monitor panel. To deactivate Siri, press the button again. On the Apple CarPlay screen:
1 Touch and hold [
2 Talk to Siri through the microphone. To deactivate Siri, touch [
]. Using the Apps of an Android device Android Auto About Android Auto Android Auto enables you to use features of your Android device convenient for driving. You can easily access route guidance, make calls, listen to music, and access convenient features on the Android device while driving. For details about Android Auto, visit <https://www. android.com/auto/> and <https://support.google. com/androidauto>. Compatible Android devices See page 6. Connecting an Android device compatible with Android Auto See pages 6 to 10. If two Android devices compatible with Android Auto are connected wirelessly, the device recognized first is used for Android Auto. To use the other Android device, select it on the <Device List>. Bluetooth mobile phone currently connected is disconnected when Android device with Android Auto is connected with Bluetooth. Starting Android Auto Selecting [Android Auto] on the screen displays the Android Auto screen and enable use of the Apps of the connected Android device. Unlock your Android device beforehand. Preparation:
Select [Android Auto] for the <Android Mode Select> setting (page 11). To change the source from the others Touch [Android Auto] on the source/option selection screen (page 12). Now Playing Camera Apple CarPlay Android Auto Bluetooth Audio TEL USB Apps SETUP HD Radio SiriusXM USB Mirroring HDMI Eg. Source/option selection screen for DMX809S The Android Auto screen is displayed. 16 ENGLISH 00_DMX_809S_KN.indb 16 00_DMX_809S_KN.indb 16 2022/07/15 13:00 2022/07/15 13:00 AppsApps Operation buttons on the Android Auto screen You can perform the operations of the Apps of the connected Android device. The items displayed on the screen differ among the connected Android device. 1 1 Application/information buttons Starts the application or displays information. To exit the Android Auto screen Press the HOME button on the monitor panel. Using voice guidance of the Android device You can activate the voice guidance of the Android device while the Android Auto screen is displayed. 1 Press the VOICE button on the monitor panel. The voice guidance is activated. 2 Speak to the microphone to operate the Android device. To cancel the voice guidance, press the button. Each time you press the button, the voice guidance turns on and off. Using the Apps of an Android device USB Mirroring This feature is only used with Android device. By installing KENWOODs Mirroring OA App into your Android device, the screen of the Android device is displayed on the monitor panel of this unit, and you can operate the Android device using the touch panel of this unit. For details about KENWOODs Mirroring, visit
<https://www.kenwood.com/cs/ce/>. Compatible Android device Android version 7.0 or later Installing KENWOODs Mirroring OA App You can obtain Mirroring OA for KENWOOD in Google Play. Make sure to install the most recent version into your Android device. When you use Mirroring OA for KENWOOD for the first time, the terms of service are displayed. It is necessary to agree to the terms of service to use this feature. Connecting an Android device with KENWOODs Mirroring OA App installed Connect an Android device with KENWOODs Mirroring OA App installed via both USB and Bluetooth connection (page 6). Starting USB Mirroring Preparation:
Unlock your Android device beforehand. Make sure that the KENWOODs Mirroring OA App is installed. Select [Mirroring for Android] for the <Android Mode Select> setting (page 11). 1 Connect the Android device. 1 Connect the device with Bluetooth. Pair the device with the unit via Bluetooth. See Pairing a Bluetooth device on page 7. Select [USB Mirroring] on the profile setting of the <Device List> screen (page 9). 2 Then, connect the device with USB. Then follow steps 2 to 4 below on the Android device screen:
2 Touch the icon of KENWOODs Mirroring OA App. 00_DMX_809S_KN.indb 17 00_DMX_809S_KN.indb 17 ENGLISH 17 2022/07/15 13:00 2022/07/15 13:00 AppsApps USBUSB 3 Touch [OK] to start KENWOODs Mirroring Playback operations 1 Displays/hides the following operation keys OA App. 4 Touch [Start now] to capture the Android device screen to the screen of this unit. 5 Touch [USB Mirroring]. On the source/option selection screen (page 12):
Now Playing Camera Apple CarPlay Android Auto Bluetooth Audio TEL USB Apps SETUP HD Radio SiriusXM USB Mirroring HDMI Eg. Source/option selection screen for DMX809S The Android device screen is displayed on the monitor screen of this unit. You can access your Android device from this unit. Start playing the USB All files in the USB device will be played repeatedly until you change the source or disconnect the USB device. When no USB device is connected:
Connect a USB device to the USB terminal. The playback source changes to [USB] and playback starts. When a USB device is already connected:
Select [USB] as the source. From the Home screen (page 3), touch as follows:
Playback information and key operation To exit the Android device screen Press the HOME button on the monitor panel. USB
Selects a folder.
[MODE]
Selects repeat playback mode by touching repeatedly.*
Displays the <USB Mode> screen. 2 Jacket picture (artwork) is shown if any 3 Playing time/playback status 4 Content information Touching [< ] scrolls the text if not all of the text is shown. 5 Operation keys
Displays the <Equalizer> screen
(page 42). Displays the search method selection window.
[S]/[T]
(Touch) Selects a file.
(Hold) Reverses/forwards search.
[IW]
Starts/pauses playback. Selects random playback mode.*
6 Repeat/Random mode indicator 7 File type indicator (MUSIC/MOVIE/PICTURE) 8 Current playback file information
(file type/folder no./file no.)
* You cannot activate repeat playback mode and random playback mode at the same time. 18 ENGLISH 00_DMX_809S_KN.indb 18 00_DMX_809S_KN.indb 18 2022/07/15 13:00 2022/07/15 13:00 USBUSB Selecting the file type to play You can specify the file type to play. USB File type Audio Select the file type as follows:
[Audio]
[Video]
[Photo]
Plays back audio files. Plays back video files. Plays back still picture files (Slide Show). You can select the picture to use for display background (see <User Customize> on page 47). If the USB contains no files of the selected type, the message "No File" appears. In this case, select the correct file type. Video playback operations While watching a video, you can use the following features. Touch screen operations Video menu control Menu Control Touching the numbered areas above performs the following actions:
1 Displays the video menu control. 2 Displays the video source control screen. 3 Goes to the previous file. 4 Goes to the next file. Touching the operation keys performs the following actions:
1
[ Aspect]
Displays the <Aspect> screen. Touch [ Aspect] to select the aspect ratio.
<Full>: For 16:9 original pictures 4:3 signal 16:9 signal
<Normal>: For 4:3 original pictures 4:3 signal 16:9 signal
<Auto>: The aspect ratio is automatically selected to match the incoming signals. 00_DMX_809S_KN.indb 19 00_DMX_809S_KN.indb 19 ENGLISH 19 2022/07/15 13:00 2022/07/15 13:00 USBUSB
[ Picture Adjust]
Displays the <Screen Adjustment>
screen. 1 Touch [DIM ON] or [DIM OFF] to turn on or off the dimmer. 2 Touch [+]/[] to adjust the other items.
<Contrast>: Adjusts the contrast
(10 to +10).
<Bright>: Adjusts the brightness
(15 to +15).
<Color>: Adjusts the color
(10 to +10). Search operations You can search files to play. 1 Display the search method selection screen. On the source control screen:
2 Select the search method.
<Tint>: Adjusts the tint (10 to +10). Folder List Video source control screen USB Category Search Play Link Search Folder List Top Up
[Category List]
[Link Search]
[Folder List]
Search a file by its category (only for audio files). Search a file of the same artist/
album/genre with the audio file currently selected. Select a file in the folder list. 3 Follow the following procedure for
<Category List>, <Link Search> and
<Folder List>. For list screen operations, see also page 14. 1 File type 2 Playback status 3 Current playback folder no./file no. 4 Playing time 5 Playback mode indicator (Repeat/Random) 20 ENGLISH 00_DMX_809S_KN.indb 20 00_DMX_809S_KN.indb 20
<Category Search>
This is only used for audio files. To change the file type, see page 19. 1 Select your desired category. Category Search Artists Albums Genres Songs Play A-Z Top Up List of the selected category appears. 2 Select your desired file on the list.
<Link Search>
This is only used for audio files. To change the file type, see page 19. 1 Select the tag information. Link Search Artist name Album title Genre Play A-Z Top Up List of the contents containing the same tag with the file currently playing file is displayed. 2 Select your desired file on the list. 2022/07/15 13:00 2022/07/15 13:00 USBUSB
<Folder List>
Select the folder, and then the item in the selected folder. Folder List Folder name 1 Folder name 2 Audio file 1 Audio file 2 Video file 1 Play Top Up Touching [ < ] scrolls the text if not all of the text is shown. Settings for USB playback 1 Display the <USB Mode> screen. On the source control screen:
HD Radio (for DMX809S) HD Radio
(for DMX809S) You can tune in to both HD Radio and conventional FM/AM radio programs. To find HD Radio stations in your area, visit
<http://www.hdradio.com>. About HD Radio Technology 2 Make the settings. USB Mode Drive Select 4:3LBNext Adjacent to traditional main stations are HD2/HD3 Channels, providing new original formats on the FM dial. HD Radio broadcasts deliver crystal-clear, CD-like digital audio quality to consumers.
<Drive Select>
Next: Switch between internal memory and the memory source of the connected device (such as mass storage device). Provides song name, artist, station ID, and other relevant data to enrich the listening experience. Delivers critical and life-saving messages to the public during emergency situation. 00_DMX_809S_KN.indb 21 00_DMX_809S_KN.indb 21 ENGLISH 21 2022/07/15 13:00 2022/07/15 13:00
(for DMX809S) HD Radio (for DMX809S) HD Radio Listening to the radio Playback information on the source control screen This unit alarms you emergency when receiving the alarm signals (page 24). Radio Select [HD Radio] as the source. From the Home screen (page 3), touch as follows:
The last channel you selected is tuned in, and the source control screen for the channel is displayed. When receiving the analog signal broadcast, the information on the screen is different from above. See page 25 for the information displayed while receiving analog signals. 1 Selects the band (AM/FM1/FM2/FM3) Each time you touch [FM], FM band changes in order of FM1, FM2, and FM3. 2 HD Radio sub-channel indicator 3 Station (channel) information area Call letter/Slogan/Artist/PTY/Message Touching [< ] scrolls the text if not all of the text is shown. Touching [PTY] switches between [PTY], [PS],
[Radio Text] and [Message]. 4 Current station frequency 5 Displays the preset stations window (page 24) To hide the window, touch [ > ]. 6 [P1] [P5]
(Touch) Selects a preset channel.
(Hold) Presets the current channel. 7 Displays/hides the following operation keys
[PTY]
[SEEK]
(For FM stations) Enters PTY search mode. 1 Touch [PTY]. 2 Touch and hold a PTY code to search for. If there is a station broadcasting a program of the same PTY code as you have selected, that station is tuned in. Selects the seek mode for [S]/
[T]. AUTO1*: (Initial): Auto search AUTO2*: Tunes in preset stations one after another MANU*: Manual search
* This setting also affects the [CHJ/CHK]
operation. 22 ENGLISH 00_DMX_809S_KN.indb 22 00_DMX_809S_KN.indb 22 2022/07/15 13:00 2022/07/15 13:00
(for DMX809S) HD Radio (for DMX809S) HD Radio
[AME ]
[MODE]
[Emergency Alert]
[Alert Message Log]
(Hold) Starts auto-memory presetting of the stations. Displays the <Radio Mode> screen. Activates or deactivates Emergency Alert. Displays the received alert message log. 8 EA indicator (page 24) 9 Operation keys
[CHJ]/
[CHK]
[S]/[T]
Displays the <Equalizer> screen
(page 42). Selects a sub-channel when receiving an HD Radio multicast channel. Searches for a station. The search method differs according to the selected setting for [SEEK]. p ST indicator Lights up when receiving a FM broadcast with sufficient strength. q Seek mode indicator w HD indicator Lights up when receiving an HD Radio broadcast. e MC indicator Lights up when receiving an HD Radio multi-
channel broadcast. r HD Radio reception mode indicator Received signal is indicated DIGITAL or ANALOG. 00_DMX_809S_KN.indb 23 00_DMX_809S_KN.indb 23 Changing the receive mode Presetting stations in the memory You can change HD Radio receive mode. 1 Display the <Radio Mode> screen. On the source control screen:
2 Select receive mode. Radio Mode Receive Mode Auto
[Auto]
[Digital]
[Analog]
Switches the receiving signal automatically digital or analog. Select this to tune in to the digital audio signals. Select this to tune in to the analog audio signals. You can preset five stations each for AM and FM1/
FM2/FM3. Automatic presetting AME (Auto Memory) 1 Select the band. On the source control screen:
FM1 FM3 2 Start AME.
(Hold) The preset stations differ depending on the <Receive Mode> setting. When [Digital] is selected, main channels (HD1) of digital broadcasting stations are preset. When [Analog] is selected, analog broadcasting stations are preset. When [Auto] is selected, both digital and analog broadcasting are preset. ENGLISH 23 2022/07/15 13:00 2022/07/15 13:00
(for DMX809S) HD Radio (for DMX809S) HD Radio Manual presetting You can store either main channel (HD1) or sub-
channel (HD2 HD8) for digital broadcasting stations. 1 Select the band, and then tune in to a station you want to preset. On the source control screen:
FM1 FM3 2 Select a desired channel if available. 3 Select a preset number to store into. Selecting a preset station Using Emergency Alert 1 Select the band, then display the preset station window. On the source control screen:
FM1 FM3 You can activate Emergency Alert and check Alert Message log. Activating Emergency Alert On the source control screen:
2 Select a preset station. Radio AM FM1 P1 FM1 P2 FM1 P3 FM1 P4 FM1 P5 FM1 Emergency Alert is activated, and the EA indicator lights up as follows. White: When the current station supports Emergency Alert. Orange: When Emergency Alert is not available. Red: When Emergency Alert is received or snoozed. To deactivate, touch [Emergency Alert] again. Radio AM FM1 P1 FM1 P2 FM1 P3 FM1 P4 FM1 P5 FM1
(Hold) To show the details of the item, touch [< ]. You can also select a preset channel by touching
[P1] [P5]. To hide the window: Touch [ > ]. The station selected in step 1 is stored into the preset number [P1] to [P5] you have selected. 24 ENGLISH 00_DMX_809S_KN.indb 24 00_DMX_809S_KN.indb 24 2022/07/15 13:00 2022/07/15 13:00
(for DMX809S) HD Radio (for DMX809S) HD Radio When an alert message is received:
The following alert message screen appears. 05:00PM / Category Name / Call Sign
(Message) Snooze Ignore After checking the message, touch [Snooze] or
[Ignore].
[Snooze]
[Ignore]
The same alert message does not interrupt again for 10 minutes. The same alert message does not interrupt again for next 12 hours. The alert message screen goes off. Checking Alert Message Log You can confirm the details of the alert messages received. 1 Display the <Alert Message Log> screen. On the source control screen:
2 Select the emergency alert message to confirm. Touching [ < ] scrolls the text if not all of the text is shown. For list screen operations, see also page 14. Alert Message log yy-mm-dd_hh:mm P yy-mm-dd_hh:mm P yy-mm-dd_hh:mm P yy-mm-dd_hh:mm P yy-mm-dd_hh:mm P The selected message is displayed. Touch [Close]
to close the message window. To deactivate, touch [Emergency Alert] again. 00_DMX_809S_KN.indb 25 00_DMX_809S_KN.indb 25 Radio (for DMX8709S) Radio
(for DMX8709S) Listening to the radio This unit alarms you emergency when receiving an alarm signal from FM broadcast. Select [Radio] as the source. From the Home screen (page 3), touch as follows:
The last station you selected is tuned in, and the source control screen for the station is displayed. Playback information on the source control screen Radio 1 Selects the band (AM/FM1/FM2/FM3) Each time you touch [FM], FM band changes in order of FM1, FM2, and FM3. ENGLISH 25 2022/07/15 13:00 2022/07/15 13:00 Radio (for DMX8709S) Radio (for DMX8709S) 2 Station information area Touching [<] scrolls the text if not all of the text is shown. Touching [Radio Text] switches between [Radio Text], [Radio Text Plus] and [PTY]. 3 Current station frequency 4 Displays the preset stations window (page 27) To hide the window, touch [ > ]. 5 [P1] [P5]
(Touch) Selects a preset station.
(Hold) Presets the current station. 6 Displays/hides the following operation keys
[AME
[MONO]
[TI]
(Hold) Preset the stations automatically.
(For FM stations) Activates monaural mode for better FM reception (stereo effect will be lost). The MONO indicator lights up. To deactivate, touch [MONO] again.
(For FM RBDS stations) Activates TI standby reception mode. When TI is activated, the unit is ready to switch to Traffic Information if available. The TI indicator lights up in white. If the TI indicator lights up in orange, tune in to another station providing Radio Broadcast Data System signals. The volume adjustment made for Traffic Information is automatically memorized and used. To deactivate, touch [TI] again. 7 Indicators TI indicator ST/MONO indicator The ST indicator lights up when receiving an FM stereo broadcast with sufficient signal strength. Seek mode indicator 8 Operation keys
[PTY]
[SEEK]
[S]/[T]
Displays the <Equalizer> screen
(page 42).
(For FM RBDS stations) Enters PTY search mode. 1 Touch [PTY]. 2 Touch and hold a PTY code to search for. If there is a station broadcasting a program of the same PTY code as you have selected, that station is tuned in. Selects the seek mode for [S]/
[T]. AUTO1 (Initial): Auto search AUTO2: Tunes in preset stations one after another MANU: Manual search Searches for a station. The search method differs according to the selected setting for [SEEK] (see above). Presetting stations in the memory You can preset five stations each for AM and FM1/
FM2/FM3. Automatic presetting AME (Auto Memory) 1 Select the band On the source control screen:
FM1 FM3 2 Start AME.
(Hold) The local stations with the strongest signals are found and stored automatically. 26 ENGLISH 00_DMX_809S_KN.indb 26 00_DMX_809S_KN.indb 26 2022/07/15 13:00 2022/07/15 13:00 Radio (for DMX8709S) Radio (for DMX8709S) Manual presetting 1 Select the band, and then tune in to a station you want to preset. On the source control screen:
FM1 FM3 Selecting a preset station 1 Select the band, and then display the preset station window. On the source control screen:
FM1 FM3 2 Select a preset number to store into. 2 Select a preset station. Radio AM FM1 P1 FM1 P2 FM1 P3 FM1 P4 FM1 P5 FM1
(Hold) Radio AM FM1 P1 FM1 P2 FM1 P3 FM1 P4 FM1 P5 FM1 The station selected in step 1 is stored into the preset number [P1] to [P5] you have selected. To show the details of the item, touch [< ]. You can also select a preset channel by touching
[P1] [P5]. To hide the window: Touch [ > ]. SiriusXM Satellite Radio SiriusXM Satellite Radio Only SiriusXM brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Connect Vehicle Tuner and subscription are required. For more information, visit <www.siriusxm.com>. Connecting SiriusXM Connect Vehicle Tuner See page 58. Activating subscription 1 Check your Radio ID. The SiriusXM Satellite Radio ID is required for activation and can be found by tuning to Channel 0 as well as on the label found on the SiriusXM Connect Vehicle Tuner and its packaging. The Radio ID does not include the letters I, O, S or F. 2 Activate the subscription. For users in the U.S.A.:
Online:
Visit <www.siriusxm.com/activatenow>
Phone: Call SiriusXM Listener Care at 1-866-635-2349 For users in Canada:
Online: Visit <www.siriusxm.ca/activate>
Phone: Call XM Customer Care at 1-888-539-7474 3 Confirm the activation. A confirmation message appears. Touch [Return]. 00_DMX_809S_KN.indb 27 00_DMX_809S_KN.indb 27 ENGLISH 27 2022/07/15 13:00 2022/07/15 13:00 SiriusXM Satellite Radio SiriusXM Satellite Radio Listening to the SiriusXM Satellite Radio Select [SiriusXM] as the source. From the Home screen (page 3), touch as follows:
[SEEK]
Activates or deactivates the content alert for traffic and weather. Changes the seek mode for [CHJ]/
[CHK]. SEEK1 (Initial): Skips to another available channel. SEEK2: Skips to another preset channel.
[S]/[T] Controls playback during content
[SCAN]
[Live]
[Direct Channel]
replay. Starts TuneScan. Switches between replay mode and live broadcast. Enter the channel number to select a channel. Changes the page in the window to display other operation keys. 2 Displays album artwork for most SiriusXM music channels (cache real-time images for current channel only) 3 Station (channel) information area a Channel name Touching [
contents in b, c, and d as follows.
] changes the displayed b Artist Category c Song title Channel description d Information Related channel Touching [<] scrolls the text if not all of the text is shown. 4 Displays the preset channel window (page 30) To hide the window, touch [ > ]. 5 [P1] [P5]
(Touch) Selects a preset channel.
(Hold) Presets the current channel. 6 Selects the band (SXM1/SXM2/SXM3/SXM4) The channel no. currently selected is displayed. 7 Playback status and time code for the buffered data and replay mode The time code shows you the point in the replay buffer you are listening to. (Eg. 5:00 means that you are listening to audio that is 5 minutes behind the current broadcast.) 8 SiriusXM signal strength indicator 9 Seek mode indicator p Replay time bar for replay mode Gray: The remaining capacity Blue: The amount of buffered contents q Operation keys
[IW]
[CHJ]/
[CHK]
Displays the <Equalizer> screen
(page 42). Displays the <Channel List> screen. Starts/pauses the content replay. Selects the channel. To select all Channels, make sure
[SEEK1] is selected as the seek mode. To select only preset channels, make sure [SEEK2] is selected as the seek mode. 2022/07/15 13:00 2022/07/15 13:00 The last channel you selected is tuned in, and the source control screen for the channel is displayed. Playback information on the source control screen SriusXM 1 Displays/hides the following operation keys
[MODE]
Displays the <SiriusXM Mode>
screen.
(Hold) Registers the current artist to the alert contents.
(Hold) Registers the current song to the alert contents. 28 ENGLISH 00_DMX_809S_KN.indb 28 00_DMX_809S_KN.indb 28 SiriusXM Satellite Radio SiriusXM Satellite Radio Selecting a channel You can select the channel by directly entering channel number or by selecting it on the channel list. Selecting a channel directly When you enter the channel number of parental-
locked channel (page 33), the <Parental Code Check> screen appears. Enter the correct parental code to access the channel. 1 Display the <Direct Channel> entry screen. On the source control screen:
2 Enter the channel number (1), and then confirm (2). Direct Channel
Clear Enter To correct misentry, touch [Clear]. 00_DMX_809S_KN.indb 29 00_DMX_809S_KN.indb 29 Selecting a channel on the list 1 Display the <Channel List> screen. On the source control screen:
2 Select a category (1), and then select a channel (2). Channel List Channel All Channels 100Ch Channel Name Category Name 1 105Ch Channel Name Category Name 2 110Ch Channel Name Category Name 3 115Ch Channel Name Category Name 4 120Ch Channel Name To list all the channels, touch [All Channels]. Touch the info change key above the list
([Channel]/[Artist]/[Song Title]/[Info]) to change the list. Presetting channels in the memory You can preset five channels for each band. 1 Select the band, and then tune in to a channel you want to preset. On the source control screen:
2 Select a preset number to store into. SiriusXM P1 P2 P3 P4 P5
(Hold) The channel selected in step 1 is stored into the preset number [P1] to [P5] you have selected. ENGLISH 29 2022/07/15 13:00 2022/07/15 13:00 SiriusXM Satellite Radio SiriusXM Satellite Radio Selecting a preset channel Replaying content
[IW]
Starts/pauses playback. 1 Select the band, and then display the preset channel window. On the source control screen:
2 Select a preset channel. SiriusXM P1 100Ch P2 105Ch P3 110Ch P4 115Ch P5 120Ch Channel Name Channel Name Channel Name Channel Name Channel Name To show the details of the item, touch [< ]. You can also select a preset channel by touching
[P1] [P5]. To hide the window: Touch [ > ]. You can also select the preset channels by touching
[CHJ]/[CHK] (page 28). You can pause, rewind and replay the contents of the currently tuned channel. The SiriusXM Connect Vehicle Tuner continually buffers up to 60 minutes of audio. If you change to another channel during replay, the buffered contents will be lost. The time code is updated every second. 1 Display the operation keys for replay. On the source control screen:
2 Perform the replay operations. SiriusXM
[S]/[T]
Skips the current track. Touching [S] within 2 seconds of the beginning of the current track returns to the previous track. Touching [S] after 2 seconds or more of the current track returns to the beginning of the track.
(Hold) Reverses/forwards search.
[Live]
Returns to the live (current broadcast) position. SiriusXM Satellite Radio features SmartFavorites
(Available for SXV200 or later) User stored channels (P1 to P5) are recognized as SmartFavorites channels. SiriusXM Connect Vehicle Tuner automatically buffers their broadcast content. When you select a SmartFavorites channel, you can rewind and replay up to 30 minutes of any of the missed news, talk, sports or music content. While SmartFavorites channel is tuned in, the album artwork of the playback song is displayed on the screen if any. If not available, station logo, channel logo, etc. will be displayed. If you change to another band, the buffered content is cleared. 30 ENGLISH 00_DMX_809S_KN.indb 30 00_DMX_809S_KN.indb 30 2022/07/15 13:00 2022/07/15 13:00 SiriusXM Satellite Radio SiriusXM Satellite Radio TuneStart When you select a SmartFavorites channel, you can listen to the current song from the beginning. 1 Display the <SiriusXM Mode> screen. On the source control screen:
2 Activate TuneStart. On the <SiriusXM Mode> screen, touch as follows:
<TuneStart> : [ON]
To deactivate TuneStart: Touch [OFF] in step 2. TuneScan You can get a short preview of the songs you have missed on each of your SmartFavorites music channels and the currently tuned music channel. Activate TuneScan to start scanning the first 6 seconds of the recorded music contents. Start TuneScan. On the source control screen:
The unit starts scanning. The I icon is displayed on the screen when TuneScan is activated. To select the previous/next music content, touch
[S] or [T]. To end scanning and continue listening to the current music content, touch [SCAN]. To exit scanning, touch and hold [SCAN]. Content Alert The unit informs you when receiving the content you are interested in, such as music, information about a sports team, weather and traffic information. For list screen operations, see also page 14. Registering items for Contents Alert You can register your favorite artists, songs or teams. Up to 50 contents can be registered. For artists/songs While listening to your favorite artist/song:
On the source control screen:
(Hold) Touching the operation keys performs the following actions:
(Hold) Registers the artist of the current song.
(Hold) Registers the current song. For teams 1 Display the <SiriusXM Mode> screen. On the source control screen:
2 Display the <Alert Team Select> screen. On the <SiriusXM Mode> screen, touch as follows:
<Alert Team Select> : [Enter]
3 Select the league (1) and the team (2), then register into the content alert (3). Alert Team Select League1 League2 League3 League4 League5 Team1 Team2 Team3 Team4 Team5 To show the details of the item, touch [< ]. 00_DMX_809S_KN.indb 31 00_DMX_809S_KN.indb 31 ENGLISH 31 2022/07/15 13:00 2022/07/15 13:00 SiriusXM Satellite Radio SiriusXM Satellite Radio Selecting items for Content Alert You can select items (artists/songs/teams) on the list, so that this unit informs you once the selected item starts being broadcast. For artists/songs/teams 1 Display the <SiriusXM Mode> screen. On the source control screen:
To delete the registered items: Touch and hold the item you want to delete in step 2. The [
selected item. Touch the [
] icon and a check mark appear beside the
] icon to delete. Activating Content Alert For artists/songs/teams 1 Display the <SiriusXM Mode> screen. On the source control screen:
To delete all registered contents: Touch and hold
] for <Content Alerts Contents Set> in
[All Clear step 2. For traffic and weather information 1 Display the <SiriusXM Mode> screen. On the source control screen:
2 Activate Content Alert. On the <SiriusXM Mode> screen:
<Content Alerts> : [ON]
2 Display the <Content Alerts Contents Set>
screen. On the <SiriusXM Mode> screen, touch as follows:
<Content Alerts Contents Set> : [SET]
2 Select the city you desire traffic and 3 Select the category (1), then the item (2). weather information for. To deactivate Content Alert: Touch [OFF] in step 2. For traffic and weather information Make sure <Content Alerts> is set to [ON]. On the source control screen:
Content Alerts Contents Set Artist Title Team 000Ch Ch Name 000Ch Ch Name 000Ch Ch Name 000Ch Ch Name 000Ch Ch Name SiriusXM Mode Content Alerts ON OFF Content Alerts Contents Set SET All Clear Alert Team Select Enter Traffic Weather Jump City Select Los Angeles SiriusXM Reset Reset A check mark appears beside the selected item. To show the details of the item, touch [<]. When traffic and weather starts being broadcast, this unit automatically switches the channel broadcasting the information. To deactivate the Content Alert: Touch [
] again. 32 ENGLISH 00_DMX_809S_KN.indb 32 00_DMX_809S_KN.indb 32 2022/07/15 13:00 2022/07/15 13:00 SiriusXM Satellite Radio SiriusXM Satellite Radio Switching to your favorite content For artists/songs/teams When the contents of artist/song/team registered for Content Alert is being broadcast, an alert appears on the screen. Touch [Jump], and then select the item to jump to on the <Content Alerts> screen. Content Alerts Artist 1/ Channel Name Artist 2/ Channel Name Song 1/ Channel Name Song 2/ Channel Name Team 1/ Channel Name Team 2/ Channel Name To show the details of the item, touch [<]. For traffic and weather information When a traffic and weather information for the selected city status being broadcast, the unit automatically switches the channel. Setting reception restrictions You can limit access to SiriusXM channels, such as those with mature content. 4 Enter a new four-digit code, and then touch [Enter] to confirm. 5 Repeat step 4 to confirm the new code. Changing the parental code The initial setting is 0000. Changing the code does not change the
<ParentalControl>/<Parental Lock Channel Selection> settings. 1 Display the <SiriusXM Mode> screen. On the source control screen:
Activating parental control You can set the parental control feature to lock any SiriusXM channels or automatically lock all channels classified as mature by SiriusXM. 1 Display the <SiriusXM Mode> screen. On the source control screen:
2 Display the <Parental Code Check>
Control>. 2 Select the desired mode for <Parental
[OFF]
Deactivates parental control.
[Mature]
[User]
Locks channels classified as mature by SiriusXM. Locks selected channels. To lock channels, see page 34. 3 Enter the parental code to confirm your selection. screen. On the <SiriusXM Mode> screen, touch as follows:
<Parental Code> : [Change]
3 Enter the four-digit code (initial: 0000)
(1), and then touch [Enter] (2) to confirm. Parental Code Check Enter Old Code
1 4 7 Clear Cancel 2 5 8 0 3 6 9 Enter To clear the last entry, touch [Clear]. To cancel setting the code, touch [Cancel]. 00_DMX_809S_KN.indb 33 00_DMX_809S_KN.indb 33 ENGLISH 33 2022/07/15 13:00 2022/07/15 13:00 SiriusXM Satellite Radio SiriusXM Satellite Radio Parental Lock channel selection 5 Repeat step 4 to set the parental lock on This option allows you to manually select the channels to be locked by the parental control feature. You can only change the setting if
<ParentalControl> is set to [User]. 1 Display the <SiriusXM Mode> screen. On the source control screen:
2 Display the <Parental Lock Channel Selection> screen. On the <SiriusXM Mode> screen, touch as follows:
<Parental Lock Channel Selection> : [SET]
3 Enter the parental code. The <Parental Lock Channel Selection> screen appears. 4 Select a category (1), and then a channel
(2). Parental Lock Channel Selection All Channels 100Ch Channel Name Category Name 1 105Ch Channel Name Category Name 2 110Ch Channel Name Category Name 3 115Ch Channel Name Category Name 4 120Ch Channel Name A check mark appears beside the selected channel. To show the details of the item, touch [<]. To list all the channels, select [All Channels]. multiple channels. To deactivate parental lock for all locked channels:
Select [All Clear] for <Parental Lock Channel Selection> in step 1, then enter the parental code. Skipping unwanted channels If you do not want to receive some channels, you can skip them. 1 Display the <SiriusXM Mode> screen. On the source control screen:
2 Display the <Skip Channel Selection>
screen. On the <SiriusXM Mode> screen, touch as follows:
<Skip Channel Selection> : [SET]
3 Select a category (1), and then a channel
(2). Skip Channel Selection All Channels 100Ch Channel Name Category Name 1 105Ch Channel Name Category Name 2 110Ch Channel Name Category Name 3 115Ch Channel Name Category Name 4 120Ch Channel Name A check mark appears beside the selected channel. To show the details of the item, touch [<]
To list all the channels, select [All Channels]. 4 Repeat step 3 to skip multiple channels. To clear the channel skipping for all skipped channels: Touch and hold [All Clear Channel Selection> in step 2.
] for <Skip Resetting the SiriusXM Satellite Radio settings You can reset all the SiriusXM settings you made and restore the initial settings. 1 Display the <SiriusXM Mode> screen. On the source control screen:
2 Reset the settings. On the <SiriusXM Mode> screen, touch and hold as follows:
<SiriusXM Reset> : [Reset
34 ENGLISH 00_DMX_809S_KN.indb 34 00_DMX_809S_KN.indb 34 2022/07/15 13:00 2022/07/15 13:00 Other External Components Other External Components HDMI/AV-IN devices Connecting external components See page 58. Using the HDMI device 1 Select [AV-IN] as the source. From the Home screen (page 3), touch as follows:
[Aspect]
Preparation:
Select [HDMI] for the <Wireless SETUP> setting when using the HDMI device connected to the HDMI terminal (page 51). When selecting [Camera] for the <AV Input>
setting (page 49), you cannot select [AV-IN]. 2 Turn on the connected component and start playing the source. 1 Select [HDMI] as the source. From the Home screen (page 3), touch as follows:
Video menu control You can display the video menu control while watching the video from the external components. Touch the upper portion of the screen. 2 Turn on the connected HDMI device and start playing the source. Using the AV-IN component Preparation:
Select [AV-IN] for the <AV Input> setting when connecting the external AV device to the AV-IN terminals (page 49). The <Menu Control> screen appears. Only for [AV-IN]: Displays the <Aspect>
setting screen. Touch [Aspect] to select the aspect ratio.
<Full>: For 16:9 original pictures 4:3 signal 16:9 signal
<Normal>: For 4:3 original pictures 4:3 signal 16:9 signal
[Picture Adjust]
Displays the <Screen Adjustment>
screen (page 48). Cameras Install the cameras (separately purchased) in the appropriate position according to the instructions supplied with the cameras. Connecting a front/rear view camera See page 58. To use the rear view camera, a reverse lead (REVERSE) connection is required (page 59). When connecting the front/rear view camera, set the <Front Camera> and <Rear Camera> settings correctly (pages 48 and 49). 00_DMX_809S_KN.indb 35 00_DMX_809S_KN.indb 35 ENGLISH 35 2022/07/15 13:00 2022/07/15 13:00 Other External Components Other External Components Connecting a camera to the AV-IN terminals See page 58. When connecting the external camera to the AV-IN terminals, select [Camera] for the <AV Input>
setting (page 49). For the rear view camera: The rear view screen is displayed by shifting the gear to the reverse (R) position when <Rear Camera Interruption> is set to
[ON] (page 49). A caution message appears on the screen. To remove the caution message, touch the screen. For the front view camera: The front view screen is displayed by releasing the gear from the reverse (R) position when <Front Camera Interruption> is set to other than [OFF] (page 49). Watching camera view 1 Display the camera view. From the Home screen (page 3), touch as follows:
The camera view screen of one of the connected camera is displayed. 36 ENGLISH 00_DMX_809S_KN.indb 36 00_DMX_809S_KN.indb 36 2 Change the camera view. Touch the upper portion of the screen shown below. Each time you touch, camera view changes among front view camera, rear view camera, and AV-IN camera. To display parking guide line
(Only for the rear view camera) Touch the area shown below, or set <Parking Guidelines> to [ON] (page 49). To close the parking guidelines, touch the same area again. To exit the camera screen Press the HOME button on the monitor panel or touch the area shown below. Using an external component via ADS adapter OEM Features By connecting this unit to the bus system of the vehicle using iDatalink (commercially available), this unit can access the satellite radio source provided for the vehicle and vehicle information can be displayed on this unit. Displayable screens, key names, and screen names vary depending on the type of the connected iDatalink and the model of the vehicle. For details, visit <www.idatalink.com/>. Connecting an ADS adapter See page 58. Using an external component via an ADS adapter For settings to use an ADS adapter, see page 51. 1 Select OEM Features as the source. From the Home screen (page 3), touch as follows:
When the gear is released from the reverse (R) position, the screen also returns to the previous playback source screen. 2022/07/15 13:01 2022/07/15 13:01 Other External Components Other External Components Bluetooth Device Bluetooth Device
[Satellite Radio]
[Media Player]
[TEL]
[BT Streaming]
[Gauges]
[Climate]
[Parking Assist]
Displays the control screen of the satellite radio source provided for the vehicle. Displays the control screen of the media player source provided for the vehicle. Displays the control screen of the Bluetooth hands-free function provided for the vehicle. Displays the control screen of the Bluetooth streaming function provided for the vehicle. Displays the information about the instruments such as a speedometer. Displays the information about the air conditioner of the vehicle. Displays the information about the Parking Distance Sensor of the vehicle.
[Vehicle Info] Displays the information about the
[Radar Detector]
tire pressures of the vehicle. Displays the information about the Radar Detector. 2 Select the information you want or the playback source to play. When you select the playback source, turn on the connected component and start playing the source. You can use the mobile phone and portable audio player connected through Bluetooth. While using Apple CarPlay, Android Auto, or USB Mirroring, use their features for hands-free phones and audio playback. (The Bluetooth device currently connected is disconnected when an iPhone with Apple CarPlay or an Android device with Android Auto is connected.) Note While driving, do not perform complicated operations such as dialing numbers, using the phone book, etc. When you perform these operations, stop your car in a safe place. To use the Bluetooth function, you need to turn on the Bluetooth function of the device. Some Bluetooth devices may not be used with this unit depending on the Bluetooth version of the device. When a Bluetooth mobile phone is connected, the signal strength and battery level are displayed when the information is acquired from the device. If your mobile phone supports PBAP (Phone Book Access Profile), you can display the following items on the touch panel when the mobile phone is connected. Phone book Dialed calls, received calls, and missed calls (up to 10 entries in total) Two devices for Bluetooth mobile phone and one for Bluetooth audio can be connected at a time. However, when [Bluetooth Audio] is selected as the source, you can connect up to five Bluetooth audio devices and switch between these five devices. Bluetooth mobile phone When a call comes in, this unit automatically enters
[TEL], and when it ends, go back to the previous source. When a call comes in... 1 2 Device Name 1 Device Name 2 Incoming Call Name 1234XXXXXX 1 Phone device information Either hands-free phone 1 or 2 is highlighted to indicate which phone is ringing when a call comes in. Touching the operation keys performs the following actions:
Answers a call. Rejects a call. Call information is displayed if acquired. Phone operation is not available while the picture from any camera is displayed. 00_DMX_809S_KN.indb 37 00_DMX_809S_KN.indb 37 ENGLISH 37 2022/07/15 13:01 2022/07/15 13:01 Bluetooth Device Bluetooth Device During a call... 1 2 Phone Name 1 Phone Name 2 Talking... Name 1234XXXXXX NR LEVEL
+1
EC LEVEL DTMF MIC LEVEL
+1
+1
Making a call 1 Display the phone control screen. From the Home screen (page 3), touch as follows:
Touching the operation keys performs the following actions:
Ends a call.
Switches between hands-free mode and phone mode.
[DTMF]
NR LEVEL
EC LEVEL
MIC LEVEL
Enters DTMF (Dual Tone Multi Frequency). You can send a text using the keypad. Adjusts the noise reduction level.
(5 to 5) Adjusts the echo volume level.
(5 to 5) Adjusts the volume level of the microphone. (10 to 10) Press the VOL J/K buttons on the monitor panel to adjust the volume of the call or earpiece. 2 Select which phone to use if two mobile phones are connected. 1 2 Device Name 1 Device Name 2 1234XXXXXX X 1 4 7
2 5 8 0/+
3 6 9
The active device is highlighted.
* Displays the <Connections SETUP> screen (page11). 3 Select a method to make a call (1 5). 1 2 Device Name 1 Device Name 2 1234XXXXXX X 1 4 7
2 5 8 0/+
3 6 9
1 From the call history* (missed calls/received calls/dialed calls) 2 From the phone book*
3 From the preset list 4 Use direct number entry 5 Use voice dialling
* Applicable only for mobile phone compatible with PBAP (Phone Book Access Profile). 4 Select a contact (1), then make a call (2). When item 1, 2 or 3 is selected in step 2:
1 2 Device Name 1 Device Name 2 Name 1 1234XXXXXX Name 2 2345XXXXXX Name 3 3456XXXXXX Name 4 4567XXXXXX Name 5 8901XXXXXX A-Z To use alphabet search in the phone book 1 Touch [
2 Touch the first letter you want to search for on A-Z]. the keypad. To search for a number, touch [1,2,3...]. 3 Select a contact you want to call from the list. Phone book search results:
Sort order, display order or any other equivalent settings of the phone may affect and show different search results (page display). 38 ENGLISH 00_DMX_809S_KN.indb 38 00_DMX_809S_KN.indb 38 2022/07/15 13:01 2022/07/15 13:01 Bluetooth Device Bluetooth Device To display other phone numbers in the same contact You can store up to ten phone numbers per contact. 1 Touch [> ]. 2 Select a contact you want to call from the list. Presetting phone numbers You can preset up to five phone numbers. 1 Display the phone control screen. From the Home screen (page 3), touch as follows:
When item 4 is selected in step 3:
Enter the phone number (1), then make a call (2). 1 2 Device Name 1 Device Name 2 1234XXXXXX X 1 4 7
2 5 8 0/+
3 6 9
To enter +, touch and hold [0/+]. To delete the last entry, touch [ X ]. When item 5 is selected in step 3:
Say the name of the person you want to call. Available only when the connected mobile phone has a voice recognition system. If the unit cannot find the target, Please speak into the microphone appears. Touch [Start], and then say the name again. To cancel voice dialling, touch [Cancel]. 2 Select which phone to use if two mobile phones are connected. 1 2 Device Name 1 Device Name 2 1234XXXXXX X 1 4 7
2 5 8 0/+
3 6 9
The active device is highlighted.
* Displays the <Connections SETUP> screen (page11). 3 Select call history or phone book (1), and then select a contact (2) to preset. 1 2 Device Name 1 Device Name 2 Name 1 1234XXXXXX Name 2 2345XXXXXX Name 3 3456XXXXXX Name 4 4567XXXXXX Name 5 8901XXXXXX A-Z 4 Select a preset number to store into. 1 2 Device Name 1 Device Name 2 1234XXXXXX 2345XXXXXX 3456XXXXXX No preset No preset
(Hold) To delete the contact in the preset number: Touch
] besides the contact on the preset list. Bluetooth mobile phone settings You can change various settings for using Bluetooth devices on the <TEL SETUP> screen. 1 Display the <TEL SETUP> screen. From the Home screen (page 3), touch as follows:
Then, on the <Setup> screen, touch as follows:
[System] <Connections SETUP> : [Enter]
<TEL SETUP> : [Enter]. On the <TEL SETUP> screen, you can change and confirm the following items. 00_DMX_809S_KN.indb 39 00_DMX_809S_KN.indb 39 ENGLISH 39 2022/07/15 13:01 2022/07/15 13:01 Bluetooth Device Bluetooth Device 2 Make the settings.
<Auto Response>
ON: The unit answers the incoming calls automatically in 5 seconds. OFF (Initial): The unit does not answer the calls automatically. Answer the calls manually.
<Auto Pairing>
ON (Initial): Bluetooth devices are automatically paired. For iPhone with Apple CarPlay and Android device with Android Auto: When the device is connected via USB, it is automatically paired regardless of this setting OFF: Cancels. (Not available)
<Auto Connect>
ON (Initial): Automatically establishes a connection with the already registered Bluetooth device when the unit is turned on. OFF: Cancels.
<Bluetooth HF/Audio>
Select the speakers used for Bluetooth mobile phones and Bluetooth audio players. Front Only: Front speakers only. All (Initial): All speakers. Bluetooth audio player Select [Bluetooth Audio] as the source. From the Home screen (page 3), touch as follows:
The <Bluetooth Audio> screen is displayed. 1 Jacket picture (artwork) is shown if any 2 Playing time/playback status 3 Tag data* (current file title/artist name/album title) Pressing [< ] scrolls the text if not all of the text is shown. 4 Signal strength and battery level
(Appears only when the information is acquired from the device.) 5 Device name Touching the device name shows the
<KENWOOD Music Mix> screen (page 41). 6 Displays/hides other available operation keys
Selects random playback mode. Selects repeat playback mode by touching repeatedly. Displays the <Connections SETUP>
screen (page 11). 7 Operation keys
[S]/[T]
Displays the <Equalizer> screen
(page 42). Displays the category list.
(Touch) Selects a file.
(Hold) Reverses/forwards search.
[I]
[W]
Starts playback. Pauses playback. 8 Repeat mode indicator 9 Random mode indicator
* Available only for devices compatible with AVRCP 1.3. 40 ENGLISH 00_DMX_809S_KN.indb 40 00_DMX_809S_KN.indb 40 2022/07/15 13:01 2022/07/15 13:01 Bluetooth Device Bluetooth Device Selecting an audio file from the menu KENWOOD Music Mix 1 Display the audio menu. On the source control screen:
You can connect up to five Bluetooth audio devices at the same time. You can easily switch between these five devices by playing music from the device. 2 Select a category (1), and then select a desired item (2). For list screen operations, see also page 14. Bluetooth Audio Playlists Artist Album Songs Genre Bluetooth Audio Artist 1 Artist 2 Artist 3 Artist 4 Artist 5 Select an item in each layer until you reach and select the desired file. 00_DMX_809S_KN.indb 41 00_DMX_809S_KN.indb 41 1 Display the device list for KENWOOD Music Mix. On the source control screen:
(Device name) List of the registered devices is displayed. KENWOOD Music Mix Play Device Name Bluetooth Audio 1 Bluetooth Audio 2 Bluetooth Audio 3 Bluetooth Audio 4 Bluetooth Audio 5 2 Select the device (1) and start playback
(2). KENWOOD Music Mix Play Device Name Bluetooth Audio 1 Bluetooth Audio 2 Bluetooth Audio 3 Bluetooth Audio 4 Bluetooth Audio 5 The selected device starts playback. The meaning of the icons and their colors:
Icon Meaning Device used currently for <Bluetooth Audio>. Touch to display the <Device List>
screen (page 9). Devices ready for KENWOOD Music Mix. Touch to select the playback device. Touch to start playing back the selected device. When the playback starts, the background of the icon becomes blue.
* When the icon and background color are gray, the device is not available. ENGLISH 41 2022/07/15 13:01 2022/07/15 13:01 Settings Settings Audio settings 1 Display the <Audio> screen. On the source/option selection screen (page 12):
Then, on the <Setup> screen, touch as follows:
[Audio] (1) [Enter] for the item you adjust (2). Setup Audio Equalizer Display Sound Effect Input Fader / Balance System Speaker / Xover Time Alignment Enter Enter Enter Enter Enter
<Equalizer>
The following adjustments are memorized for each source until you adjust the sound again. Selecting a preset sound mode Select a preset sound mode on the <Equalizer>
screen (1). Pops/Easy/Top40/Jazz/Powerful/Rock/Flat
(Initial)/Bass Boost/User1/User2/User3/User4 Equalizer SRC Name Preset Flat
[dB]
+9
+7
+5
+3 0
-3
-5
-7
-9 62.5 100 160 250 400 630 1k 1.6k 2.5k 4k 6.3k 10k 16k [Hz]
Bass EXT ON OFF SW Level 0 EQ INIT ALL SRC 2 Adjust the item. The <Audio> settings are not adjustable;
When the unit is in standby (STANDBY). When the Bluetooth phone is used (making or receiving a call, during a call, or while voice dialling).
<SW Level>
Adjusts the subwoofer level (2). Not adjustable when <None> is selected for subwoofer on the <Speaker Select> screen
(page 44). When Apple CarPlay or Android Auto is used for 50 to +10 (Initial: 0) phone calling. To apply the adjusted equalizer to all playback sources, touch [ALL SRC], and then touch [OK] to confirm. Store your own sound adjustments 1 Select one of the User mode (User1 User4) to store your adjustment into. 2 Select a band (1), adjust the level (2), and then adjust the sound (3). Equalizer SRC Name Preset User1
[dB]
+9
+7
+5
+3 0
-3
-5
-7
-9 62.5 100 160 250 400 630 1k 1.6k 2.5k 4k 6.3k 10k 16k [Hz]
Bass EXT ON OFF SW Level 0 EQ INIT ALL SRC Repeat 1 and 2 to adjust the level of other bands. Finally adjust the following items.
<Bass EXT>
Activates/deactivates bass. ON/OFF (Initial) To clear the adjustment, touch [EQ INIT]. Once the adjustment screen is closed, your adjustment is memorized. 42 ENGLISH 00_DMX_809S_KN.indb 42 00_DMX_809S_KN.indb 42 2022/07/15 13:01 2022/07/15 13:01 Settings Settings
<Sound Effect>
Adjust the sound effect.
<Loudness>
Adjusts loudness. OFF (Initial)/Low/High
<Bass Boost>
Selects the bass boost level. OFF (Initial)/Level 1/Level 2/Level 3
<Drive Equalizer>
Reduces the driving noise by raising the bandwidth. OFF (Initial)/ON
<Space Enhancer>
Virtually enhances the sound space using the Digital Signal Processor (DSP) system (except for Digital Radio and Radio). Select the enhance level. OFF (Initial)/Small/Medium/Large
<Supreme>
Compensates the sound lost while audio compression process (except for analog signals). OFF/ON (Initial)
<Realizer>
Virtually makes the sound more realistic using the Digital Signal Processor (DSP) system. Select the sound level. OFF (Initial)/Level 1/Level 2/Level 3 00_DMX_809S_KN.indb 43 00_DMX_809S_KN.indb 43
<Stage EQ>
Moves the center of the sound to the lower or higher point. Select the height. OFF (Initial)/Low/Middle/High
<Fader/Balance>
Touch [J]/[K]/[H]/[I] or drag the mark to adjust.
<Fader>
When <X'over Network> is set to [2 way], you can adjust the front and rear speaker output balance. F15 to R15 (Initial: 0)
<Balance>
Adjusts the left and right speaker output balance. L15 to R15 (Initial: 0) To clear the adjustment: Touch [Center].
<Speaker/Xover>
Preparation:
Before making the adjustment for <Speaker/X'over>, select the appropriate crossover network mode according to the speaker system (2-way speaker system or 3-way speaker system). 1 Put the unit in standby. From the Home screen (page 3), touch as follows:
2 Display the <Xover Network> screen. Press the VOL K button on the monitor panel and touch the upper right portion on the touch panel at the same time:
[2 way]
3 Select the crossover network mode. Select this when 2-way system speakers are used (front/rear). Select this when 3-way system speakers are used (tweeter/mid range/subwoofer).
[3 way]
A confirmation message appears. Touch [Yes]. ENGLISH 43 2022/07/15 13:01 2022/07/15 13:01 Settings Settings Now, you can adjust the <Speaker/X'over>
settings. 1 Display the <Setup> <Audio>
<Speaker/X'over> screens (page42). 2 Select a car type (1), select the location of the speakers (2)*, and then display the
<Speaker Select> screen (3). Car Setting OFF OFF Front Lower Door Area 3 Select the speaker type (1), select the size of the selected speaker (2), and then display the <Xover> screen (3). Speaker Select 6 1/2 inch If a speaker is not connected, select [None]. When setting the front speakers, select the speaker size for <Tweeter>.
* <Speaker Location> is available only when <Xover Network> is set to [2 way].
<Speaker Location> for rear speakers is only available when the rear speakers are selected for <Speaker Select>. 4 Adjust the crossover frequency of the selected speaker. Adjustable items vary depending on the selected speaker type/speaker size/crossover settings.
<Gain>/<TW Gain>
Adjusts the output volume of respective speaker.
<HPF FREQ>/<LPF FREQ>
Adjusts the crossover frequency for respective speaker.
<Slope>
Adjusts the crossover slope for respective speaker.
<Phase>
Selects the phase for the speaker.
<Time Alignment>
This setting improves the sound field for the seats you select.
<Position>
You can select either <Listening Position> or <Front Focus> on the screen. You cannot use both setting at the same time. X'over Front TW Gain Gain HPF FREQ
[dB]
0dB 8dB 30Hz Slope
-24dB/Oct
[Hz]
Eg. when adjusting <X'over> for front speakers 44 ENGLISH 00_DMX_809S_KN.indb 44 00_DMX_809S_KN.indb 44 2022/07/15 13:01 2022/07/15 13:01 Settings Settings
<Listening Position>
This setting is used for both 2-way speaker system and 3-way speaker system. 1 Specify your favorite listening position. 1 Touch [Listening Position]. 2 Select the listening position [All] (Initial),
[FrontL], [Front R] or [Front All]*. 3 Touch [Adjust]. Position Listening Position Front Focus Front L Front All Front R All Adjust
* [Front All] is selectable only when <X'over Network> is set to [2 way]. 2 Touch [Distance] (1), and then enter the distance from your listening position to each speaker (2). 3.48 ft 0.00 ms 3.48 ft 0.00 ms 3.48 ft 0.00 ms 3.48 ft 0.00 ms 3.48 ft 0.00 ms 3 Touch [Gain] (1), and then adjust the sound level of each speaker (2). Time Alignment Tweeter 0.0 dB Front L 0.0 dB Rear L 0.0 dB Subwoofer 0.0 dB Front R 0.0 dB Rear R 0.0 dB To initialize the setting value: Touch [Initialize].
<Front Focus>
When you select 2-way speaker system, you can use this setting, enabling you to focus the imaginary sound localization for the seat you select. 1 Select the listening position. 1 Touch [Front Focus]. 2 Select from [FrontL], [Front R], [Front All
(Priority L)], [Front All (Priority R)], [All
(Priority L)], or [All (Priority R)]. Priority means to which seats (left or right) the sound localization tends to be shifted. 3 Touch [Adjust]. Determining the delay time adjustment If you specify the distance from the center of your listening position to every speaker, the delay time is automatically computed and set. Eg. When [Front All] is selected as the listening position Position Listening Position Front Focus Front L Front All Priority L All Priority L Front R Front All Priority R All Priority R Adjust
+3.5 ft 1.4 ft 2.45 ft 4.9 ft
+2.45 ft
+0 ft 00_DMX_809S_KN.indb 45 00_DMX_809S_KN.indb 45 ENGLISH 45 2022/07/15 13:01 2022/07/15 13:01 Settings Settings 2 Touch [Distance] (1), and then adjust the following parameters (2). 3 Touch [Gain] (1), and then adjust the sound level of each speaker (2). Front Focus Adjust Distance Gain 0.94ms 0.94ms 0.94ms 0.94ms 0.94ms Sound Image LR(Front) Sound Image LR(Rear) Size of the Virtual Sound Field Subwoofer Delay Initialize Front Focus Adjust Tweeter 0.0 dB Front L 0.0 dB Rear L 0.0 dB Subwoofer 0.0 dB Front R 0.0 dB Rear R 0.0 dB Display settings 1 Display the <Display> screen. On the source/option selection screen (page 12):
Then, on the <Setup> screen, touch as follows:
[Display] (1) [Enter] for the item you adjust or the appropriate setting for the item (2).
[Sound Image LR (Front)]
[Sound Image LR (Rear)]
[Size of the Virtual Sound Field]
Locates the sound image in front of the front seats, and adjust the balance. You can mute the sounds of the rear speakers and subwoofer. Locates the sound image in front of the rear seats, and adjust the balance. Adjusts the virtual sound field to the desired field size. If the sound image moves out of the front position, adjust
[Sound Image LR (Front)]/
[Sound Image LR (Rear)].
[Subwoofer Delay]
Adjusts the delay time of subwoofer sound. To close and finish the parameter setting, touch
[Close]. 46 ENGLISH 00_DMX_809S_KN.indb 46 00_DMX_809S_KN.indb 46 To initialize the setting value: Touch [Initialize]. Setup
<Volume Offset>
Adjust and store the auto-adjustment volume level for each source. The volume level will automatically increase or decrease when you change the source. 5 to +5 (Initial: 0) Audio Dimmer Display User Customize Input OSD Clock System Demonstration Scroll Auto Enter ON ON OFF OFF ON Once OFF 2 Adjust the item if more steps are required. See the respective explanation that follows.
<Dimmer>
Auto (Initial): Dims the screen and button illumination when you turn on the headlights. The ILLUMI lead connection is required
(page 59). ON: Activates dimmer. OFF: Deactivates dimmer. 2022/07/15 13:01 2022/07/15 13:01 Settings Settings
<User Customize>
You can change the following items. Background image of the Home screen Display background by using your desired still image file (JPEG/BMP/PNG) Illumination color of the buttons on the monitor panel Home screen display pattern You can also adjust the illumination color yourself. Touch the white-colored box, and then [Edit] to display the illumination color adjustment screen, then select the dimmer setting and adjust the color. The adjustment is saved in the white-colored box. Selecting a changes the illumination color gradually.
<Home Design>: Changes the display pattern of the Home screen.
<Background>: Changes the background image of the Home screen. To store your own image into <User>.
<Panel Color>: Changes the illumination color of the buttons on the monitor panel. To store your own scene for <Background>
When using an image file, make sure that the resolution is 800 x 480 pixels. You cannot capture copyrighted content and images. The color of the captured image may look different from that of the actual scene. a To store your own illumination color setting into the white-colored box. 00_DMX_809S_KN.indb 47 00_DMX_809S_KN.indb 47 1 While playing Slide Show, display the
<User Customize> screen. 1 Press the HOME button on the monitor panel. The Home screen is displayed. 2 Touch [
], and then [
The <Setup> screen is displayed.
]. 3 Then, on the <Setup> screen, touch as follows:
[Display] <User Customize>: [Enter]
2 Display the <Background> screen, and then touch, and then touch [
Capture]. The current still picture is displayed on the screen.
3 Touch [
Moves to the following still picture. Capture] to capture the image. A confirmation message appears. Touch [Yes] to store the captured image into [User]. (The existing image is replaced with the new one.) To return to the previous screen, touch [No]. To cancel the capture, touch [Cancel].
<OSD Clock>
ON (Initial): Displays the clock while the screen is off, or while a video source is playing. OFF: Cancels. ENGLISH 47 2022/07/15 13:01 2022/07/15 13:01 Settings Settings
<Demonstration>
ON (Initial): Activates the display demonstration. OFF: Deactivates the display demonstration.
<Scroll>
ON (Initial): Scrolls the displayed information repeatedly. Once: Scrolls the displayed information once. OFF: Cancels. Touching [ < ] scrolls the text regardless of this setting.
<Home Customize>
Changes the playback sources to display on the Home screen (page 3). 1 Select the source to replace (1), and then select a new source (2) to display on the Home screen. Eg. Home Customize screen for DMX809S 2 Repeat step 1 to replace the other playback sources. 48 ENGLISH 00_DMX_809S_KN.indb 48 00_DMX_809S_KN.indb 48
<Screen Adjustment>
Adjust the following items related to the screen. Select [DIM ON] (dimmer on) or [DIM OFF] (dimmer off), then change the following settings:
<Contrast>
Adjusts the contrast. 10 to +10 (Initial: 0 for both dimmer on and off)
<Bright>
Adjusts brightness. 15 to +15 (Initial: 0 for dimmer on, and +15 for dimmer off)
<Color>
Adjusts the color. 10 to +10 (Initial: 0 for both dimmer on and off)
<Tint>
Adjusts the tint. 10 to +10 (Initial: 0 for both dimmer on and off)
<Viewing Angle>
Select the viewing angle in relation to the monitor to make the image on the screen easier to see. Under 0 (Initial)/5/10/15/20 Input settings 1 Display the <Input> screen. On the source/option selection screen (page 12):
Then, on the <Setup> screen, touch as follows:
[Input] (1) [Enter] for the item you adjust or the appropriate setting for the item (2). Setup Audio Front Camera Display Rear Camera Input Parking Assist Enter Enter Enter System AV Input AV-IN Camera 2 Adjust the item if more steps are required. See the respective explanation that follows.
<Front Camera>
Configure the front view camera settings.
<Front Camera>
ON: Select this when the front view camera is connected. OFF (Initial): Select this when no front view camera is connected. 2022/07/15 13:01 2022/07/15 13:01 Settings Settings
<Front Camera Interruption>
When you shift the gear from the reverse position (R) to another position, the view screen changes to the front view screen automatically and remains for the preset period of time. Selectable when <Front Camera> and <Rear Camera Interruption> are set to [ON].
<Guidelines Setup>
Adjust the parking guidelines according to the size of the car, parking space and so on. When adjusting the parking guidelines, make sure to use the parking brake to prevent the car from moving. mark (1), and then adjust the position of Select the the selected mark (2). 5 Sec/10 Sec/15 Sec/20 Sec. OFF (Initial): Not used.
<Rear Camera>
Configure the rear view camera settings.
<Rear Camera Interruption>
ON (Initial): Displays the picture from the rear view camera when you shift the gear to the reverse (R) position. A caution message appears on the screen. To remove the caution message, touch the screen. OFF: Select this when no rear view camera is connected.
<Parking Guidelines>
ON (Initial): Displays the parking guidelines. OFF: Hides the parking guidelines. Initialize Make sure that A and B are horizontally parallel, and that C and D are the same length. Touch and hold [Initialize
] for 2 seconds to set all the marks to the initial default position.
<Reverse with ATT>
ON (Initial): The sound is attenuated while the gear is shifted to the reverse (R) position. OFF: Not used.
<Parking Assist>
Configure settings for using the ADS adapter.
<Parking Assist Display>
When an ADS adapter is connected, you can display information about obstacles around the car. ON: Always displays information. Dyn. (Initial): Displays information when the sensor detects obstacles. OFF: Cancels.
<Parking Assist Position>
Select where information about obstacles is displayed on the screen. Left/Right (Initial)
<AV Input>
Select the usage of the AV-IN input terminal
(adjustable only in Standby Mode (page 4)). AV-IN (Initial): Select this when an external AV device is connected. To watch the connected device, select [AV-IN] on the source/option selection screen. Camera: Select this to watch the view from the connected camera. To watch the camera view, select [Camera] on the source/option selection screen. 00_DMX_809S_KN.indb 49 00_DMX_809S_KN.indb 49 ENGLISH 49 2022/07/15 13:01 2022/07/15 13:01 Settings Settings System settings 1 Display the <System> screen. On the source/option selection screen (page 12):
Then, on the <Setup> screen, touch as follows:
[System] (1) [Enter] for the item you adjust or the appropriate setting for the item (2). Setup Audio Language English Display Clock Input Time Format System Time Zone Clock Adjust Enter Enter Enter Enter
<Time Format>
Select the time display formateither [12-Hour]
(Initial) or [24-Hour].
<Time Zone>
Select the time zone for your residential area. For details, see page 5.
<Clock Adjust>
Adjust the date and clock manually. For details, see page 5.
<Daylight Saving Time>
(Not used when the clock is set manually) Activate this by selecting the additional time for Daylight Saving Time (if available in your residential area). For details, see page 5. 2 Adjust the item if more steps are required. See the respective explanation that follows.
<Language>
Select the text language used for on-screen information. For details, see page 4. Please Ignition Off appears when the setting is changed. Turn the ignition switch off then on to enable the change.
<Connections SETUP>
Specify or confirm the connected devices information.
<Device List>
Shows the list of the connected (registered) devices. For details, see page 9.
<PIN Code>
Shows the current PIN code for this unit. This setting is available only when iPhone with Apple CarPlay is not connected.
<Clock>
Set the date and clock adjustment method. For details, see page 5.
<Device Name>
Shows the device name of this unitDMX809S or DMX8709S.
<Bluetooth Device Address>
Shows the Bluetooth device address of this unit.
<Initialize>
Touch and hold [Enter] to reset all settings you have made for using Bluetooth mobile phones and Bluetooth audio players.
<TEL SETUP>
Configure settings for using Bluetooth mobile phones. For details, see page 40. This setting is available only when iPhone with Apple CarPlay is not connected.
<Wi-Fi Setup>
Shows the device name, device address and password of this unit.
<Device Audio Control>
Adjust the device sounds. For details, see page 11.
<Driving Position>
Set your drivers seat position of your car [LEFT]
(initial) or [RIGHT]. This setting changes the sidebar/button position of Apple CarPlay/Android Auto screens accordingly with the driver seat position. This setting is available only when iPhone with Apple CarPlay and Android device with Android Auto are not connected.
<Android Mode Select>
Select your Android usage either [Android Auto]
(initial) or [Mirroring for Android]. This setting is available only in Standby Mode with no device connected via USB. 50 ENGLISH 00_DMX_809S_KN.indb 50 00_DMX_809S_KN.indb 50 2022/07/15 13:01 2022/07/15 13:01 Settings Settings
<Reset Android Auto Wireless Connection>
Reset the password of Android Auto wireless connection. For details, see page 11.
<Beep>
This setting is available only when 2-way speaker system is selected (page 43). ON (Initial): Activates the key-touch tone. OFF: Deactivates the key-touch tone.
<SETUP Memory>
Memorize, recall, or clear the settings you have made. The memorized settings are kept even when the unit is reset. Available only when <SETUP Memory> is set to
[Unlock] (selected initially). Touch [Yes] to display the setting screen, then select an operation:
Recall: Recalls the memorized settings. Memory: Memorizes the current settings. Clear: Clears the currently memorized settings and return to the factory (initial) settings. Cancel: Cancels. A confirmation message appears. Touch [Yes]. You can also set to lock the <SETUP Memory> from being changed. Touch [Lock] to lock the settings. Some items in <Setup> menu, eg. <Speaker/
Xover>, cannot be adjusted when [Lock] is selected.
<Wireless SETUP>
You can change this setting only in Standby Mode without Apple CarPlay/Android Auto connected. HDMI: Select this to use the connected HDMI device.
(Wi-Fi is not available) Wi-Fi (initial) : Select this to use the Wi-Fi function.
<OEM Setup>
Get information, and change the settings for using the ADS adapter.
<Initialize>
Initialize all settings you have made. Touch and hold
[Enter] to initialize the settings. After initializing the settings, adjust the settings on the <Initial Setup> screen.
<Serial Number>
Displays the serial number.
<System Information>
Update the system by connecting a USB device containing an update file. To obtain the update file, visit
<https://www.kenwood.com/cs/ce/>. Connect a USB device with the update file to the unit. System Information Application Version System Version GNSS Version HD Radio Version Vxxx Vxxx Vxxx Vxxx Update Update Update Update Update starts. It may take a while. If the update has been completed successfully, Update Completed. Please Ignition OFF appears.
<Application Version>
Updates the system application.
<System Version>
Updates the system.
<GNSS Version>
Updates the Global Navigation Satellite firmware.
<HD Radio Version> (Only for DMX809S) Updates the HD Radio firmware. Do not disconnect the USB device while updating. If the update has failed, turn the ignition switch off then on, and retry the update.
<Open Source Licenses>
Shows the Open Source Licenses. 00_DMX_809S_KN.indb 51 00_DMX_809S_KN.indb 51 ENGLISH 51 2022/07/15 13:01 2022/07/15 13:01 Remote Controller Remote Controller To use the remote controller, purchase optional remote controller, KCA-RCDV340. When using the remote controller, refer also to the instruction manual supplied with the remote controller. Remote sensor*
MODE FNC/PBC V.SEL DVD SETUP RETURN AUDIO ANGLE
* DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting). KCA-RCDV340 Preparation Battery installation Use two AAA/R03-size batteries. Insert the batteries with the +
and poles aligned properly, following the illustration inside the case. Always insert batteries from poles to avoid bending the springs. CAUTION Do not leave the remote controller in hot places such as on the dashboard. Risk of the fire of explosion if the battery is replaced by an incorrect type. Ensure to replace only with the same type. Risk of fire, explosion or the leakage of flammable liquid or gas if the battery is left in an extremely high temperature surrounding environment and/
or subjected extremely low air pressure. The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like Risk of fire, explosion or the leakage of flammable liquid or gas if the battery is disposed into fire or a hot oven, recharged, shorted, mechanically crushed or cut of the battery. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician. 52 ENGLISH 00_DMX_809S_KN.indb 52 00_DMX_809S_KN.indb 52 2022/07/15 13:01 2022/07/15 13:01 Remote Controller Remote Controller If the Remote Controller operates only over shorter distances or does not operate at all, it is possible that the batteries are depleted. In such instances, replace both batteries with new ones. Remote Controller mode switch The functions operated from the remote controller differ depending on the position of the mode switch. AUD DVD T V AUD mode: Switch to this mode when controlling a selected source or tuner source, etc. DVD mode: Not used. TV mode: Not used. Basic operations for KCA-RCDV340 MODE FNC/PBC V.SEL DVD SETUP RETURN AUDIO ANGLE Common operations ENTER Not used for this unit. DVDSETUP Not used for this unit. RETURN AUDIO Not used for this unit. Not used for this unit. SUBTITLE Not used for this unit. ANGLE ZOOM OPEN 2 ZONE R.VOL CLEAR Not used for this unit. Not used for this unit. Not used for this unit. Not used for this unit. Not used for this unit. Not used for this unit. SRC Selects the source. Hangs up the incoming/current call. Audio file/Video file/Picture file FM+ / AM Selects a folder. VOL J/K ATT Adjusts the volume level. Attenuates/restores the sound. S / T IW Selects a file. Starts/pauses playback. Answers incoming calls. FNC/PBC/MENU Switches the control screen of MODE/
TOP MENU source. Changes the aspect ratio. The aspect ratio changes each time you press this key. V.SEL Not used for this unit. HD Radio*1/Radio*2/SiriusXM FM+ / AM Selects the band. S / T IW Searches for stations/channels.*3 Switches the seek mode. 00_DMX_809S_KN.indb 53 00_DMX_809S_KN.indb 53 ENGLISH 53 2022/07/15 13:01 2022/07/15 13:01 Remote Controller Remote Controller Installation and Connection Installation and Connection 0 9 Specifies preset number. (1-5) Specifies the frequency of the station to receive to search for in direct search. This section is for the professional installer. For safetys sake, leave wiring and mounting to professionals. Consult the car audio dealer. DIRECT Enters direct search mode. WARNINGS
*1 Only for DMX809S.
*2 Only for DMX8709S.
*3 The search method differs according to the selected seek mode. USB FM+ / AM Selects a folder. S / T IW Selects a file. Starts/pauses playback. Searching for station frequency/channel number directly While listening to the radio, you can search for a channel or station frequency directly using the number buttons. 1 Press DIRECT to enter the search mode. 2 Press a number button to select a desired item (channel or station frequency). To confirm the selection, press S / T. To exit the search mode: Press DIRECT. DO NOT connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. DO NOT cut out the fuse from the ignition wire (red) and the battery wire (yellow). The power supply must be connected to the wires via the fuse. Always connect the ignition wire (red) and the battery wire (yellow) to the power source running through the fuse box. CAUTIONS Install this unit in the console of your car. Do not touch the metal parts of this unit during and shortly after the use of the unit. Metal parts such as the heat sink and enclosure become hot. When parking at a low ceiling area, turn off the unit to store the antenna. As when the unit is installed in the car with the function of auto antenna; the radio antenna extends automatically when you turn on the unit with the antenna control wire (ANT. CONT) connected (page 59). Before installation Precautions on installation and connection Mounting and wiring this product requires skills and experience. For best safety, leave the mounting and wiring work to professionals. Mount the unit so that the mounting angle is 30 or less. Make sure to ground the unit to a negative 12 V DC power supply. Do not install the unit in a location exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. Do not press hard on the panel surface when installing the unit to the car. Otherwise scratches, damage, or failure may result. If the power is not turned on (Miswiring DC Offset Error, Warning DC Offset Error is displayed), the speaker wire may have a short circuit or have touched the chassis of the car and the protection function may have been activated. In this case, the speaker wire should be checked. Keep all cables away from heat dissipating metal parts. 54 ENGLISH 00_DMX_809S_KN.indb 54 00_DMX_809S_KN.indb 54 2022/07/15 13:01 2022/07/15 13:01 Installation and Connection Installation and Connection If your cars ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, such as with battery wires, the battery may be drained. If the fuse blows, first make sure the wires are not touching to cause a short circuit, then replace the old fuse with one with the same rating. Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps and do not let the cable out at the ends of the unconnected wires or the terminals. Secure the wires with cable clamps and wrap vinyl tape around the wires that comes into contact with metal parts to protect the wires and to prevent short circuit. Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the wires or ground them to any metal part in the car. When only two speakers are being connected to the system, connect both connectors either to the front output terminals or to the rear output terminals (do not mix front and rear). For example, if you connect the connector of the left speaker to a front output terminal, do not connect the connector to a rear output terminal. Parts list for installation Installation procedure Note: This parts list does not include all the package contents. Wiring harness ( 1) Extension wire, 2 m ( 1) Flat head screws, M5 8 mm ( 6)
[ Round head screws, M5 x 8 mm ( 6) Microphone, 3 m ( 1)
] Trim plate ( 1) Mounting sleeve ( 1)
\ Extraction keys ( 2) GPS antenna, 3.5 m ( 1) Metal plate ( 1) 1 Remove the key from the ignition and disconnect the battery. 2 Make the proper input and output wire connections for each unit. 3 Connect the speaker wires of the wiring harness. 4 Connect the wires of the wiring harness in the following order: ground, battery, ignition. 5 Connect the wiring harness to the unit. 6 Install the unit in your car. Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg., the sound may skip). 7 Reconnect the battery. 8 Initialize the unit (page51). 9 Configure <Initial Setup> (page4). 00_DMX_809S_KN.indb 55 00_DMX_809S_KN.indb 55 ENGLISH 55 2022/07/15 13:01 2022/07/15 13:01 Installation and Connection Installation and Connection Installing the unit Installing the trim plate Installing the unit using the mounting bracket removed from the car
2 When the lower level is removed, remove from the upper two catches of the trim plate (]).
Car bracket*
Removing the unit Note: Select the appropriate screws (supplied) for the mounting bracket.
* Shape of your car brackets may differ. 1 Remove the trim plate (]) by inserting the two extraction keys (\) as illustrated. The frame can be removed from the top side in the same manner. 3 Insert the extraction keys (\) deeply into the slots on each side. Installing the unit using the mounting sleeve
Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. 56 ENGLISH 00_DMX_809S_KN.indb 56 00_DMX_809S_KN.indb 56 2022/07/15 13:01 2022/07/15 13:01 Installation and Connection Installation and Connection 4 Lower the extraction keys (\) toward the bottom, and pull out the unit halfway while pressing towards the inside.
Be careful to avoid injury from the catch pins on the extraction key. 5 Pull the unit all the way out with your hands, being careful not to drop it. Installing the supplied GPS antenna GPS antenna is installed inside of the car. It should be installed as horizontally as possible to allow easy reception of the GPS satellite signals. 1 Clean your dashboard or other surface. 2 Remove the separator of the metal plate
(). 3 Press the metal plate () down firmly on your dashboard or other mounting surface. You can bend the metal plate () to conform to a curved surface, if necessary. 4 Remove the separator of the GPS antenna
(), and stick the antenna to the metal plate (). Notes on using the supplied GPS antenna () Use the supplied GPS antenna (). Using the GPS antenna other than the supplied one may cause a drop in positioning accuracy. Depending on the type of car, reception of the GPS satellite signals might not be possible with an inside installation. Please install the supplied GPS antenna () in an area away from any antennas that are used with CB radios or satellite televisions. The supplied GPS antenna () should be installed at a position that is spaced at least 30 cm (12 inch) from cellular phone or other transmitting antenna. Signals from the GPS satellite may be interfered with by these types of communication. Painting the supplied GPS antenna () with
(metallic) paint may cause a drop in performance. 00_DMX_809S_KN.indb 57 00_DMX_809S_KN.indb 57 ENGLISH 57 2022/07/15 13:01 2022/07/15 13:01 Installation and Connection Installation and Connection Connecting external components FRONT VIEW CAMERA
(USB1)5V 1.5A 1 GPS antenna input (GPS) (page 57) 2 HDMI terminal 3 Rear view camera input (R-CAM) 4 Video output (V-OUT) 5 Audio video input (AV-IN) 6 iDatalink input for connecting an ADS adapter
(commercially available) 7 Expansion port for connecting SiriusXM Connect Vehicle Tuner (EXT I/F) (commercially available) 2 Use HDMI cable KCA-HD200 (optional accessory). W H D W: 11.1 mm or less H: 7.7 mm or less D: 21.5 mm or less When you connect the cable to HDMI terminal, detach the fixture. After connecting the cable, attach the fixture back using the screw. 8 Front view camera input 9 Microphone input (MIC) (page 59) p Antenna terminal q USB terminal w Output terminals*
Left output (White) Right output (Red) REAR: Rear speaker preouts FRONT: Front speaker preouts SW: Subwoofer preouts For 3-way crossover:
REAR: Tweeter preouts FRONT: Mid range speaker preouts SW: Subwoofer preouts
* When connecting an external amplifier, connect its ground wire to the chassis of the car; otherwise the unit may be damaged. HDMI cable Fixture 5 Connect the following type of 4-pole mini plug:
1 3 24 7 1 Left audio 2 Right audio 3 Ground 4 Composite video Antenna SiriusXM Connect Vehicle Tuner
(Commercially available) 58 ENGLISH 00_DMX_809S_KN.indb 58 00_DMX_809S_KN.indb 58 2022/07/15 13:01 2022/07/15 13:01 Installation and Connection Installation and Connection Wiring connection 10 A fuse Connect to the video out terminal of the front camera Connect the antenna cord to the antenna terminal USB terminal (1 m)
(USB1)5V 1.5A Connect a USB device Purple with white stripe Light green REVERSE PRK SW White ] / White with black stripe [
Gray ] / Gray with black stripe [
Green ] / Green with black stripe [
Purple ] / Purple with black stripe [
Brown Orange with white stripe Light blue with yellow stripe Blue with white stripe (12 V 350 mA) Red (Ignition wire) Yellow (Battery wire) Black (Ground wire) MUTE ILLUMI STEERING WHEEL REMOTO INPUT REMOTE CONT ANT.CONT P.CONT To the cars reverse lamp harness when using the optional rear view camera Extension wire ( ) To the cars parking brake detection switch harness
(For best safety, be sure to connect the parking sensor.) To front speakers (left) / Mid-range speakers (left) for 3-way crossover To front speakers (right) / Mid-range speakers (right) for 3-way crossover To rear speakers (left) / Tweeters (left) for 3-way crossover To rear speakers (right) / Tweeters (right) for 3-way crossover
(Not used for this unit) To the car light control switch To the steering wheel remote control adapter (not supplied) To the power control terminal when using the optional power amplifier (Or) To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna Ignition key switch Car fuse To the car chassis Car battery ENGLISH 59 00_DMX_809S_KN.indb 59 00_DMX_809S_KN.indb 59 2022/07/15 13:01 2022/07/15 13:01 References References Maintenance Cleaning the unit Do not use any solvent (for example, thinner, benzine, etc.), detergent, or insecticide. This may damage the monitor or the unit. Gently wipe the panel with a soft, dry cloth. More information About USB playback Important Make sure all important data has been backed up to avoid losing the data. We bear no responsibility for any loss of data stored in the devices while using this unit. Notes on using a USB device Avoid using the USB device if it might affect driving safety. When connecting with a USB cable, use a USB 2.0 cable. Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case, disconnect the USB device, and turn off then on this unit. Do not pull out and connect the USB device repeatedly while Reading is shown on the screen. Operation and power supply may not work as intended for some USB devices. Do not leave a USB device in the car, or expose to direct sunlight or high temperatures to prevent deformation or damage to the device. 60 ENGLISH 00_DMX_809S_KN.indb 60 00_DMX_809S_KN.indb 60 Playable files This unit can play back the following files with following codec and extension code:
Audio files: MP3 (.mp3), WMA (.wma), WAV (.wav), AAC (.m4a), FLAC (.flac) Picture files: JPEG (.jpg, .jpeg)/PNG (.png)/BMP
(.bmp) Video files: MPEG1, 2 (.mpg, .mpeg)/MPEG4
(.mp4)/H.264 (.h264)/MWV (.mwv)/MKV (.mkv) This unit can show or display the following Tag:
MP3: ID3 Tag (version 1.0/1.1/2.2/2.3/2.4) WMA Tag WAV Tag AAC Tag FLAC Tag Jacket picture (artwork):
Picture size: 32 32 to 1 232 672 resolution Data size: less than 500 KB File type: JPEG, PNG, BMP Audio file conditions This unit can play back files that meet the conditions below:
Bit rate:
MP3: MPEG1 Audio Layer 3: 32 kbps 448 kbps This unit cannot play back the following files:
MP3 files encoded with MP3i and MP3 PRO format. MP3 files encoded with Layer 1/2. WMA files encoded with lossless, professional, and voice format. MPEG2 Audio LSF Layer: 32 kbps 384 kbps WMA files which are not based upon Windows Media Audio. WMA/AAC files copy-protected with DRM WMA: Up to 320 kbps AAC: Max 288 kbps per channel/48 kHz Bit number:
WAV: 4 bits 32 bits FLAC: 4 bits 32 bits Sampling frequency:
MP3: MPEG1 Audio Layer 3: 32 kHz 48 kHz MPEG2 Audio LSF Layer: 16 kHz 24 kHz WMA: 8 kHz 48 kHz AAC: 8 kHz 96 kHz WAV: 44.1 kHz 192 kHz FLAC: 8 kHz 192 kHz Files recorded in VBR (variable bit rate), and have a discrepancy in elapsed time indication. 2022/07/15 13:01 2022/07/15 13:01 References References Video file conditions Streams that conform to:
MPEG1/MPEG2:
Audio: MP1, MP2, MP3, AAC-LC, AC3, LPCM Video: MPEG1, MPEG2 MPEG4:
Audio: MP3, AAC Video: MPEG4 H.264:
Audio: MP3, AAC Video: H.264 MKV:
Audio: MP3, AC3, LPCM, AAC-LC/HE, AAC, Cook Video: H.264, MPEG-4 AVC, MPEG4, WMV WMV:
Audio: WMA Video: Windows Media Video 9 Maximum bit rate:
MPEG1: Max 4 Mbps MPEG4/H.264/WMV: Max 8 Mbps Picture size MPEG1: 176 x 144 , 352 x 240 , 720 x 480 (30fps) MPEG2: 176 x 144, 352 x 288, 320 x 240, 720 x 480, 720 x 576, 1 440 x 1 080, 1 280 x 720, 1 920 x 1 080 H.264: 1 920 x 1 080 (30fps) WMV: 1 280 x 720 (60fps), 1 920 x 1 080 (30fps) MPEG4: 1 920 x 1 080 (30fps) Other playable conditions:
Video file size: Less than 2 GB MPEG1/MPEG2: File format: SP@LL, SP@ML, MP@
LL, MP@ML, MP@H-14 , MP@HL, HP@LL, HP@ML, HP@H-14, HP@HL Folder/file limitations This unit can recognize:
A total of 5 000 files 250 folders each for video files/photo files and a maximum of 999 files per folder The maximum number of characters is 260 characters for folder name plus file name (when the characters are 1 byte). Unplayable USB device This unit may not play back files in a USB device properly when using a USB extension cable. USB devices equipped with special functions such as data security functions cannot be used with the unit. Do not use a USB device with nine or more partitions. Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose. This unit may not recognize a memory card inserted into a USB card reader. About Apple CarPlay The following iPhone devices can be used iPhone 6S, 6S Plus, 7, 7 Plus, 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max, SE (1st/2nd generation), 12, 12 mini, 12 Pro, 12 Pro Max, 13, 13 mini, 13 Pro, 13 Pro Max The GPS antenna must be connected to use Apple CarPlay wirelessly with Wi-Fi. Although the service area is expanding, Apple CarPlay service is NOT available in some markets. Please check the latest information concerning availability in your region from the below website. http://www.apple.com/ios/feature-
availability/#applecarplay-applecarplay About Android Auto Although the service area is expanding, Android Auto service is NOT available in some markets. Please check the latest information concerning availability in your region from the below website. https://support.google.com/androidauto/
00_DMX_809S_KN.indb 61 00_DMX_809S_KN.indb 61 ENGLISH 61 2022/07/15 13:01 2022/07/15 13:01 References References About USB Mirroring Depending on the connected Android device, you may need to enable virtual keyboard setting on your smartphone to display software keyboard on the screen of this unit and on your Android device. The audio may be of poor quality, interrupted or skipped, depending on several conditions such as network condition, the application and etc. If you perform pairing with another device during mirroring, mirroring (audio and/or video) will be disturbed or paused. Some Apps may not support audio sharing (no sound from the background playback source). Some operations may not work depending on the compatibility between this unit, Mirroring OA for KENWOOD App and your Android device. Troubleshooting Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. For operations with external components, refer also to the instructions supplied with the adapters used for connection (as well as the instructions supplied with the external components). General No sound comes out of the speakers. Adjust the volume to the optimum level. Check the cords and connections. No picture is displayed on the screen. Turn on the screen (page 4). The unit does not work at all. Initialize the unit (page 51). The remote controller does not work. Replace the battery. No Signal/No Video Signal appears. Start playback on the external component connected to this unit. Check the cords and connections. Signal input is too weak. Miswiring DC Offset Error/Warning DC Offset Error appears. A speaker cord has shorted or it has come into contact with the car chassis. Wire or insulate the speaker cord as appropriate, turn the ignition switch off then on. Parking off appears. No playback picture is shown when the parking brake is not engaged. Bluetooth connection The Bluetooth device does not detect this unit. Turn off, then turn on the Bluetooth device. Turn off, then turn on this unit. This unit does not pair with the Bluetooth device. If the device is connected via USB cable, disconnect it, and retry. Turn off, then turn on the Bluetooth device. The device is disconnected automatically or the device cannot be connected. When iPhone compatible with Apple CarPlay is connected to the USB terminal, it cannot be connected via Bluetooth. Use the phone and audio player function on the Apple CarPlay screen. When an Android device compatible with Android Auto is connected to the USB terminal, the device is connected via Bluetooth automatically, and the Bluetooth mobile phone currently connected is disconnected. 62 ENGLISH 00_DMX_809S_KN.indb 62 00_DMX_809S_KN.indb 62 2022/07/15 13:01 2022/07/15 13:01 Troubleshooting Troubleshooting The Bluetooth connection between the Bluetooth device and the unit is unstable. Delete the unused registered Bluetooth device from the unit (page 10). Connection Error appears. The device is registered but the connection has failed. Connect the registered device using the
<Device List> screen (page 9). Please Wait... appears. The unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again. Initialize Error appears. The unit has failed to initialize the Bluetooth module. Try the operation again. Wi-Fi connection iPhone for Apple CarPlay or Android device for Android Auto cannot be connected wirelessly. You can turn on or off the Wi-Fi function on the
<Wireless SETUP> settings. To use the Wi-Fi function, select [Wi-Fi] (page 51). Apps Apple CarPlay:
[Apple CarPlay] is not highlighted on the source/
option selection screen. Check the version of the connected iPhone whether it is compatible with Apple CarPlay. Check the iPhone is connected properly for Apple CarPlay. You can check the connection referring to the <Device List> screen. Sound is too loud or small while using Apple CarPlay. Adjust <Guidance/Voice Recognition Volume>,
<Phone Incoming Volume>, <Phone Calling/
Talking Volume> or <Media Volume> for
<Apple CarPlay> (page 12). The Home screen appears while using Apple CarPlay. Wi-Fi is disconnected. Android Auto:
[Android Auto] is not highlighted on the source/
option selection screen. Check whether [Android Auto] is selected in the
<Android Mode Select> (page 50). Check the version of the connected Android device whether it is compatible with Android Auto. Check the Android device is connected properly for Android Auto. You can check the connection referring to the <Device List> screen. The Home screen appears while using Android Auto. Wi-Fi is disconnected. Sound is too loud or small while using Android Auto. Adjust <Guidance/Voice Recognition Volume>,
<Phone Incoming Volume>, <Phone Calling/
Talking Volume> or <Media Volume> for
<Android Auto> (page 12). Android Auto is deactivated. When you start Apple CarPlay, Android Auto is deactivated. USB Mirroring:
[USB Mirroring] is not highlighted on the source/
option selection screen. Check whether [Mirroring for Android] is selected in the <Android Mode Select> (page 50). Check the version of the connected Android devicewhether it is compatible with USB Mirroring. Check the Android device is connected properly for USB Mirroring. You can check the connection referring to the <Device List> screen. Check KENWOOD's Mirroring OA App is activated on Android device. USB Mirroring is deactivated. When you start Apple CarPlay, USB Mirroring is deactivated. No sounds from Android device come out of the speakers. Check the Android device is connected properly with Bluetooth. 00_DMX_809S_KN.indb 63 00_DMX_809S_KN.indb 63 ENGLISH 63 2022/07/15 13:01 2022/07/15 13:01 Troubleshooting Troubleshooting USB No File appears. The loaded USB does not contains any file of the selected type (audio/video/photo). Select the correct file type or replace the USB. HD Radio (for DMX809S) Sound quality changes when receiving HD Radio stations. Fix the <Receive Mode> setting either [Digital] or
[Analog] (page 23). Reading does not disappear from the screen. Turn the power off and on again. While playing a file, sound is sometimes interrupted. The tracks are not properly copied into the USB device. Copy the files again, and try again. Files are not played back as you have intended them to play. Playback order may differ from the one played back using other players. The source does not change to [USB] when you connect a USB device while listening to another source or USB Device Error appears when you connect a USB device. The USB port is drawing more power than the design limit. Turn the power off and unplug the USB device. Then, turn on the power and reattach the USB device. If the above does not solve the problem, turn the power off and on before replacing with another USB device. No sound can be heard. The <Receive Mode> setting is not appropriate. Select the appropriate mode [Digital], [Analog]. or [Auto] (page 23). Radio (for DMX8709S) AME automatic presetting does not work. Store stations manually (page 26). Static noise while listening to the radio. Connect the antenna firmly. HDMI HDMI device connected to the HDMI terminal cannot be used. This is normal when [Wi-Fi] is selected for the
<Wireless SETUP> setting (page 51). Select [HDMI] to use the HDMI device. No picture appears on the screen. While driving, no video is shown. You can only listen to the sounds. Turn on the HDMI device if it is not on. Connect the HDMI device correctly. AV-IN No picture appears on the screen. While driving, no video is shown. You can only listen to the sounds. Select [AV-IN] for <AV Input> setting (page 49). Turn on the external component if it is not on. Connect the external component correctly. Cameras No picture appears on the screen. Connect the camera correctly. Picture from the camera connected to the AV-IN terminal is not displayed on the screen. Select [Camera] for <AV Input> setting
(page 49). SiriusXM Satellite Radio SXM No Signal appears. Make sure the antenna of the SiriusXM Connect Vehicle Tuner is mounted outside the car. Move the car to an area with a clear view of the sky. SXM Check Antenna appears. Check the antenna connection of the SiriusXM Connect Vehicle Tuner, and make sure the antenna is firmly attached to the tuner. Check whether the antenna cable of the SiriusXM Connect Vehicle Tuner is bent or broken. If it is damaged, replace the whole antenna unit. 64 ENGLISH 00_DMX_809S_KN.indb 64 00_DMX_809S_KN.indb 64 2022/07/15 13:01 2022/07/15 13:01 Troubleshooting Troubleshooting SXM Check Tuner appears. Make sure the SiriusXM Connect Vehicle Tuner is connected to the unit. SXM Chan Unavailable appears.
(Appears on the screen for about 5 seconds, then returns to the previous channel):
The selected channel is no longer available. Select another channel or continue listening to the previous channel. SXM Ch Unsubscribed appears.
(Appears on the screen for about 5 seconds, then returns to the previous channel) The selected channel is not part of your current subscription plan. Call 1-866-635-2349 (USA) or 1-888-539-7474 (Canada) to subscribe. SXM Subscription Updated Press Return to Continue appears. Your subscription has been updated. Press the appropriate button to continue. SXM Channel Locked appears. The selected channel has been locked by the parental controls. Enter the parental lock code when you are asked. SXM Incorrect Lock Code appears. You have entered an incorrect lock code. Enter the correct parental lock code. Bluetooth hands-free phone Phone is disconnected. When iPhone for Apple CarPlay or Android Auto device is connected, the currently connected Bluetooth device is disconnected. Use Apple CarPlay or Android Auto screen for phone. Phone sound quality is poor. Echo or noise occurs. Reduce the distance between the unit and the Bluetooth mobile phone. Move the car to a place where you can get a better signal reception. Adjust the sound quality using <Microphone Level>, <Echo Cancel Level>, <Noise Reduction Level> (page 12). The unit does not respond when you try to copy the phone book to the unit. You may have tried to copy the same entries (as stored) to the unit. No Data appears. No phone book data is contained in the connected Bluetooth phone. Dial Error appears. Dialing has failed. Try the operation again. Hung Up Error appears. The call has not ended yet. Park your car, and use the connected mobile phone to end the call. Pick Up Error appears. The unit has failed to receive a call. Bluetooth audio Bluetooth audio played is disconnected. When iPhone for Apple CarPlay or Android Auto device is connected, the currently connected Bluetooth device is disconnected. The sound is interrupted or skipped while using a Bluetooth audio player. Reduce the distance between the unit and the Bluetooth audio player. Disconnect the device connected for Bluetooth phone if any. Turn off, then turn on the unit.
(When the sound is not yet restored) connect the player again. The connected audio player cannot be controlled. Check whether the connected audio player supports AVRCP (Audio/Video Remote Control Profile). 00_DMX_809S_KN.indb 65 00_DMX_809S_KN.indb 65 ENGLISH 65 2022/07/15 13:01 2022/07/15 13:01 Specifications Specifications Monitor section Picture Size (W H) Display System Drive System Number of Pixels Effective Pixels Pixel Arrangement Back Lighting 6.75 inches (diagonal) wide 151.8 mm 79.7 mm
(6" 3-1/7") TN LCD panel TFT active matrix system 1 152 000
(800H 480V RGB) 99.99%
RGB striped arrangement LED USB I/F section Connector Type USB Standard File System Maximum Power Supply Current D/A Converter Audio Decoder Video Decoder Frequency Response Total Harmonic Distortion Signal to Noise Ratio Dynamic Range Type-A USB 2.0 Full Speed/High Speed FAT 16/32, exFAT DC 5 V 1.5 A 24 bit MP3/WMA/AAC/WAV/FLAC MPEG1/MPEG2/MPEG4/
WMV/H.264/MKV 192 kHz Sampling:
20 Hz to 20 000 Hz 96 kHz Sampling:
20 Hz to 20 000 Hz 48 kHz Sampling:
20 Hz to 20 000 Hz 44.1 kHz Sampling:
20 Hz to 20 000 Hz 0.010% (1 kHz) 98.5 dB 89 dB Bluetooth section Bluetooth V5.0 2.402 GHz to 2.480 GHz Line of sight approx. 10 m
(32.8 ft) Technology Frequency Maximum Communication Range Audio Codec Multi Profile Support Multi Profile Profile SBC/AAC HFP (Hands Free Profile) V1.8 SPP (Serial Port Profile) A2DP (Advanced Audio Distribution Profile) V1.3.2 AVRCP (Audio/Video Remote Control Profile) V1.6.2 PBAP (PhoneBook Access Profile) Wi-Fi section IEEE Standard 802.11 a/b/g/n/ac Frequency Range Channels Transfer rates (MAX) Dual Band (2.4 GHz/5 GHz) Auto (1-11ch) Auto (149,153,157,161ch) 11a: 54 Mbps / 11b: 11 Mbps /
11g: 54 Mbps / 11n: 150 Mbps
/ 11ac: 433 Mbps 66 ENGLISH 00_DMX_809S_KN.indb 66 00_DMX_809S_KN.indb 66 2022/07/15 13:01 2022/07/15 13:01 Tweeter HPF:
13 Band Frequency (Hz):
62.5/100/160/250/400/630/
1k/1.6k/2.5k/4k/6.3k/10k/
16k Gain (dB):
9/8/7/6/5/4/3/2/
1/0/1/2/3/4/5/6/7/8/9 Mid Range HPF:
Gain (dB):
8/7/6/5/4/3/2/1/0 Frequency (Hz):
Through/30/40/50/60/70/
80/90/100/120/150/180/
220/250 Slope (dB/Oct.):
6/12/18/24 Gain (dB):
8/7/6/5/4/3/2/1/0 Frequency (Hz):
30/40/50/60/70/80/90/100/
120/150/180/220/250/
Through Slope (dB/Oct.):
6/12/18/24 Gain (dB):
8/7/6/5/4/3/2/1/0 Phase: Normal/Reverse Mid Range LPF:
Subwoofer LPF:
Frequency (Hz):
1k/1.6k/2.5k/4k/5k/6.3k/8k/
10k/12.5k Slope (dB/Oct.):
6/12 Gain (dB):
8/7/6/5/4/3/2/1/0 Phase: Normal/Reverse Frequency (Hz):
Through/30/40/50/60/70/
80/90/100/120/150/180/
220/250 Slope (dB/Oct.):
6/12 Frequency (Hz):
1k/1.6k/2.5k/4k/5k/6.3k/8k/
10k/12.5k/Through Slope (dB/Oct.):
6/12 Gain (dB):
8/7/6/5/4/3/2/1/0 Phase: Normal/Reverse Frequency (Hz):
30/40/50/60/70/80/90/100/
120/150/180/220/250/
Through Slope (dB/Oct.):
6/12 Gain (dB):
8/7/6/5/4/3/2/1/0 Phase: Normal/Reverse Specifications Specifications DSP section Equalizer Band Tweeter:
HPF:
LPF:
00_DMX_809S_KN.indb 67 00_DMX_809S_KN.indb 67 Digital FM radio section (for DMX809S) Frequency Range
(Frequency Step) Frequency Response
(3.0 dB) Signal to Noise Ratio FM radio section 87.9 MHz to 107.9 MHz
(200 kHz) 20 Hz to 20 kHz 75 dB (STEREO) 87.9 MHz to 107.9 MHz
(200 kHz) 7.2 dBf (0.63 V/75 ) Frequency Range
(Frequency Step) Usable Sensitivity
(S/N: 30 dB) Quieting Sensitivity
(DIN S/N: 46 dB) Frequency Response
(3.0 dB) Signal to Noise Ratio Selectivity (400 kHz) > 80 dB Stereo Separation 30 Hz to 15 kHz 68 dB (MONO) 40 dB (1 kHz) 15.2 dBf (1.58 V/75 ) Digital AM radio section (for DMX809S) Frequency Range
(Frequency Step) Frequency Response
(3.0 dB) Signal to Noise Ratio 530 kHz to 1 700 kHz (10 kHz) 40 Hz to 15 kHz 70 dB (STEREO) ENGLISH 67 2022/07/15 13:01 2022/07/15 13:01 Specifications Specifications AM radio section Frequency Range
(Frequency Step) Usable Sensitivity Video section Color System of External Video Input External Video Input Level (RCA jack)/
(mini jack) External Audio Max Input Level (mini jack) Video Input Level
(RCA jack) Video Output Level
(RCA jack) Audio section Maximum Power Output (Front & Rear) Typical Power Output (Front & Rear) Output Frequency Band Preout Level Preout Impedance Speaker Impedance 68 ENGLISH 530 kHz to 1 700 kHz (10 kHz) 29 dB (28.2 V) NTSC/PAL 1 Vp-p/75 1 Vp-p/75 2 V/25 k 1 Vp-p/75 1 Vp-p/75 50 W 4 Full Bandwidth Power (at less than 1% THD) 22 W 4 20 Hz to 88 000 Hz DMX809S: 5V/10 k DMX8709S: 4V/10 k 600 4 to 8 HDMI I/F section Connector Type Input Resolution Input Audio Type General Operating Voltage Installation Dimensions
(W H D) Weight (Main Unit) Type-D VGA
(640 x 480p @ 59.94 Hz/60 Hz) 480p
(720 x 480p @ 59.94 Hz/60 Hz) 32 kHz/44.1 kHz/48 kHz/
88.2 kHz/96 kHz/176.2 kHz/
192 kHz 16 bit/20 bit/24 bit Linear PCM 12 V DC car battery Main unit:
180 mm 100 mm 75 mm
(7-1/16" 3-15/16"
2-15/16") With sleeve:
182 mm 111 mm 74 mm
(7-3/16" 4-3/8" 2-15/16") 1.2 kg (2.7 lbs) (including trim plate and sleeve) Design and specifications are subject to change without notice. Trademarks and Licenses Trademarks and Licenses Windows Media is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft. Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance. Apple, iPhone, and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries. Apple, Siri, Apple CarPlay and Apple CarPlay logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. Google, Android, Android Auto, Google Maps and other marks are trademarks of Google LLC. To use Android Auto on your car display, youll need an Android Auto compatible vehicle or aftermarket stereo, an Android phone running Android 6.0 or higher, an active data plan, and the Android Auto app. 00_DMX_809S_KN.indb 68 00_DMX_809S_KN.indb 68 2022/07/15 13:01 2022/07/15 13:01 Trademarks and Licenses Trademarks and Licenses Wi-Fi is a registered trademark of Wi-Fi Alliance. The Wi-Fi CERTIFIED Logo is a registered trademark of Wi-Fi Alliance. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. SiriusXM and all related marks and logos are trademarks of Sirius XM Radio, Inc. All rights reserved. HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. For patents see http://dts.com/patents. HD Radio and the HD, HD Radio, and ARC logos are registered trademarks or trademarks of iBiquity Digital Corporation in the United States and/or other countries. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM THIS PRODUCT IS LICENSED UNDER THE MPEG-
4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR
() ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (MPEG-4 VIDEO) AND/OR () DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://
WWW.MPEGLA.COM Font for the this product is RT Font designed and THIS PRODUCT IS LICENSED UNDER THE VC-1 sold by Ricoh Industrial Solutions Inc. Linux is the registered trademark of Linus Torvalds in the U.S. and other countries. THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO
(i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD ("AVC VIDEO") AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO
( i ) ENCODE VIDEO IN COMPLIANCE WITH THE VC-1 STANDARD (VC-1 VIDEO) AND/OR ( ii ) DECODE VC-1 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE VC-1 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW. MPEGLA.COM Important Notice on Software The software embedded in this product comprises a number of independent software components, each of which is copyrighted by JVCKENWOOD Corporation or by a third party. This product uses software components that are based on an End-User License Agreement (hereinafter called EULA) stipulated by JVCKENWOOD Corporation and by third parties. The EULA dictates the availability of the source codes of free-software components as a prerequisite to distributing them in executable form under the terms of the GNU General Public License or the Lesser General Public License (hereinafter called GPL/LGPL). To get information about the software components that are subject to the terms of the GPL/LGPL, please visit the following Website:
Website URL https://www2.jvckenwood.com/gpl/
Queries concerning the contents of the source code or the like will not be accepted. Please note that software components based on a EULA that is not subject to the terms of the GPL/LGPL or those that have been developed or created by JVCKENWOOD Corporation will be excluded from the scope of source code disclosure. Because licenses to use software components distributed under the GPL/LGPL are offered to the customers for free of charge, no warranty is granted to the customers, whether explicitly or implicitly, to the extent of the applicable laws. 00_DMX_809S_KN.indb 69 00_DMX_809S_KN.indb 69 ENGLISH 69 2022/07/15 13:01 2022/07/15 13:01 Trademarks and Licenses Trademarks and Licenses Unless otherwise stipulated by the applicable laws or agreed upon in writing, the copyright holders or those who are entitled to modify and redistribute the software components are not held responsible for any and all damages resulting from their use or from inability to use them. For more information about the terms of use of the software components, required items of compliance and so on, please refer to the GPL/LGPL. Customers wishing themselves to use a software component that is subject to the GPL/LGPL embedded in this product are encouraged to read the terms of the corresponding license before use. Because each individual license is prescribed by a third party other than JVCKENWOOD Corporation, the original (English) of the license is presented. EULA Software License Agreement JVCKENWOOD Corporation (hereinafter called Licensor) holds either the copyright to the embedded software or the right to sublicense it. This agreement establishes the conditions under which the customer uses this Licensed Software. The customer shall agree to the terms of this license agreement before proceeding to use Licensed Software. This agreement is deemed to have taken effect when the customer (hereinafter called User) has used a product implementation of Licensed Software. The Licensed Software may contain software Licensor has been licensed to use by third parties directly or indirectly. Some third parties may have terms of use prescribed for their customers, apart from this Software License Agreement. This agreement does not apply to such software. Be sure to consult Important Notice on Software as presented separately. Article 1 (General) Licensor grants to User a non-exclusive, non-assignable right of use Licensed Software within the country where the User purchases the Product (hereinafter the
"Country") (except for the exception provided for in Paragraph 1, Article 3). Article 2 (Right of Use) 1. The rise of use granted under this agreement is the right to use Licensed Software in this product. 2. User may not duplicate, copy, modify, add to, translate or otherwise alter, or loan licensed Software and the associated literature in whole or in part. 3. Use of Licensed Software is limited to a private extent , and Licensed Software may not be distributed, licensed or sublicensed for any purposes whatsoever, including commercial use. 4. User shall use Licensed Software as per the instruction manual or instructions given in the help file and may not use or duplicate data in violations of the regulations of the Copyright Law or other governing laws by using Licensed Software in whole or in part. Article 3 (Terms of License) 1. In assigning this product, User may not retain the original copy of the embedded Licensed Software (including associated literature, updates and upgrades) and any duplicates and associated literature with regard to the license to use Licensed Software. User may transfer Licensed Software only to the condition of binding the assignee to abide by the terms of this Software License Agreement. 2. User may not reverse-engineer, disassemble, decompile or otherwise analyze the source code of Licensed Software. 70 ENGLISH 00_DMX_809S_KN.indb 70 00_DMX_809S_KN.indb 70 2022/07/15 13:01 2022/07/15 13:01 Trademarks and Licenses Trademarks and Licenses Article 4 (Rights to Licensed Software) All rights to Licensed Software and the associated literature, including copyrights, shall reside with Licensor or the original right holder who has granted the Right of Use and right to sublicense to Licensor
(hereinafter referred to as Original Right Holder), and User does not have any rights other than Right of Use granted hereunder with regard to Licensed Software and the associated literature. Article 5 (Exemption Granted to Licensor) 1. Licensor and Original Right Holder do not assume any responsibility for damages caused to User or third parties resulting from the exercise by User of the license granted hereunder, unless otherwise provided by any law to the contrary. 2. Licensor does not warrant Licensed Software to be merchantable, compatible and fit for specific purposes. Article 6 (Responsibility for Third Parties) If disputes over the infringement of third parties intellectual property rights, such as copyrights and patent rights, arise out of the use of Licensed Software by User, User shall resolve these disputes at Users own expenses while keep Licensor and Original Right Holder harmless. Article 7 (Secrecy Obligation) User shall keep confidential Licensed Software provided hereunder, information contained in the associated literature or the like and those provisions of this agreement not yet in public knowledge and may not disclose or leak these to third parties without prior written consent from Licensor. Article 8 (Cancellation of the Agreement) Licensor reserves the right to cancel this agreement forthwith and claim compensation from User for the damages caused by such cancellation when User:
(1) Breaches any of the provisions of this agreement, or
(2) Has received a petition for seizure, provisional seizure, provisional disposition or any other kind of compulsory execution. Article 9 (Destruction of Licensed Software) If this agreement is terminated under the provision of the foregoing paragraph, User shall destroy Licensed Software, along with all associated literature and its duplicates, within two (2) weeks from the date of termination. Article 10 (Copyright Protection) 1. Copyrights and all other intellectual property rights relating to Licensed Software shall reside with Licensor and Original Right Holder and in no circumstances with User. 2. User shall abide by the laws relating to copyrights and intellectual property rights in using Licensed Software. Article 11 (Export Control) 1. Licensed Software and the associated literature or the like may not be exported to places outside the Country (including transmission outside the Country over the Internet or the like). 2. User agrees that Licensed Software is subject to export controls imposed by the Country and the United States of America. 3. User agrees to comply with all the international and domestic laws that apply to this software (U.S. Export Administration Regulations and regulations established by the U.S., the Country and their governmental agencies regarding usage by end users and export destinations). Article 12 (Miscellaneous) 1. Even if this agreement is invalidated in part by law, all other provisions shall remain in effect. 2. Licensor and User shall consult each other in good faith to resolve any matters not provided for in this agreement or questions arising from the interpretation of this agreement. 3. Licensor and User agree that this agreement is governed by the law of Japan and that all dispute involving claims and obligations that may arise out of this agreement will be settled by arbitration at the Tokyo District Court as the court of first instance. 00_DMX_809S_KN.indb 71 00_DMX_809S_KN.indb 71 ENGLISH 71 2022/07/15 13:01 2022/07/15 13:01 00_DMX_809S_KN.indb 72 00_DMX_809S_KN.indb 72 2022/07/15 13:01 2022/07/15 13:01 00_DMX_809S_KN.indb 73 00_DMX_809S_KN.indb 73 2022/07/15 13:01 2022/07/15 13:01 For updated information (the latest Instruction Manual, system updates, new functions, etc.), please visit the following website:
<https://www.kenwood.com/cs/ce/>
00_DMX_809S_KN.indb 1 00_DMX_809S_KN.indb 1 2022/07/15 13:01 2022/07/15 13:01
1 2 3 4 | 05 Short-Term Confidential User Manual-2 | Users Manual | 1.77 MiB | September 29 2022 / January 08 2023 | delayed release |
ENGLISH MONITOR WITH RECEIVER INSTRUCTION MANUAL KW-M785BW This instruction manual is used to describe the models listed above. Model availability and features (functions) may differ depending on the country and sales area. B5A-4051-00 (KN) 00_KW_M785BW_K.indb 1 00_KW_M785BW_K.indb 1 2022/07/25 9:44 2022/07/25 9:44 Important Notice Important Notice To ensure proper use, please read through this manual before using this product. It is especially important that you read and observe WARNINGS and CAUTIONS in this manual. Please keep the manual in a safe and accessible place for future reference. WARNINGS To prevent accidents and damages DO NOT install any unit or wire any cable in a location where;
it may obstruct the steering wheel and gearshift lever operations. CAUTIONS To care for the unit If you have parked the car for a long time in hot or cold weather, wait until the temperature in the car becomes normal before operating the unit. To care for the monitor The monitor built into this unit has been produced with high precision, but it may have some ineffective dots. This is inevitable and is not considered defective. Do not expose the monitor to direct sunlight. Do not operate the touch panel using a ball-point pen or similar tool with a sharp tip. it may obstruct the operation of safety devices such Touch the keys on the touch panel with your finger as air bags. it may obstruct visibility. DO NOT raise the volume level too much, as this will make driving dangerous by blocking outside sounds, and may cause hearing loss. DO NOT operate the unit while driving. If you need to operate the unit while driving, be sure to look around carefully. Stop the car before performing any complicated operations. The driver must not watch the monitor while driving. directly (if you are wearing a glove, take it off). When the temperature is very cold or very hot... Chemical changes occur inside, causing malfunction. Pictures may not appear clearly or may move slowly. Pictures may not be synchronized with the sound or picture quality may decline in such environments. On the volume setting Digital devices produce very little noise compared with other sources. Lower the volume before playing these digital sources to avoid damaging the speakers by sudden increase of the output level. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. i ENGLISH 00_KW_M785BW_K.indb i 00_KW_M785BW_K.indb i 2022/07/25 9:44 2022/07/25 9:44 Important Notice Important Notice Suppliers Declaration of Conformity JVC Trade Name:
MONITOR WITH RECEIVER Products:
Model Name:
KW-M785BW Responsible Party: JVCKENWOOD USA CORPORATION 4001 Worsham Avenue, Long Beach, CA 90808, U.S.A. PHONE: 1-800-252-5722 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
(2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. ISED Caution This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-exempt RSS(s). Operation is subject to the following two conditions:
1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. 00_KW_M785BW_K.indb ii 00_KW_M785BW_K.indb ii CAUTION About this manual This equipment complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules. This equipment should be installed and operated keeping the radiator at least 20 cm or more away from persons body. About GPS When you turn on this unit for the first time, you must wait while the system acquires GPS signals from satellites. This process could take up to several minutes. Make sure your vehicle is outdoors in an open area away from tall buildings and trees for fastest acquisition. Once the system acquires GPS signals, this unit will acquire them quickly each time you turn on this unit. The displays and panels shown in this manual are examples used to provide clear explanations of the operations. For this reason, they may be different from the actual displays or panels. This manual mainly explains operations using the buttons on the monitor panel and keys on the touch panel. For operations using the remote controller, see page 51.
< > indicates the various screens/menus/
operations/settings that appear on the touch panel.
[ ] indicates the keys and source names on the touch panel. Indication language: English indications are used for the purpose of explanation. You can select the indication language from the <Settings> menu
(page 47). This symbol on the product means there are important operating and maintenance instructions in this manual. Be sure to carefully read instructions in this manual. ENGLISH ii 2022/07/25 9:44 2022/07/25 9:44 Contents Contents Component Names and Basic Operations ..... 3 Monitor panel ....................................................................................3 Home screen ......................................................................................3 Turning on the power ..................................................................3 Turning off the power ..................................................................3 Adjusting the volume ...................................................................4 Attenuating the sound ................................................................4 Turning off the AV source ..........................................................4 Initial settings .....................................................................................4 Date and clock settings ...............................................................5 In-Car Connections ............................................. 5 USB connection ................................................................................6 Bluetooth connection ................................................................6 Connections setting ................................................................... 10 Various Screens and Operations ...................12 Source/option selection screen .......................................... 12 Source control screen ................................................................ 12 List/setting screen........................................................................ 13 Apps ....................................................................14 Using Apps of iPhone Apple CarPlay ........................ 14 Using the Apps of an Android device Android Auto ........................................................................ 16 Using the Apps of an Android device USB Mirroring ........................................................................... 17 Tuner ...................................................................22 Listening to the radio................................................................. 22 Setting the tuner mode............................................................ 23 Presetting stations in the memory .................................... 23 Selecting a preset station ........................................................ 24 SiriusXM Satellite Radio ........................... 24 Listening to the SiriusXM Satellite Radio ..................... 25 Selecting a channel ..................................................................... 26 Presetting channels in the memory ................................. 26 Selecting a preset channel ..................................................... 27 Replaying content ....................................................................... 27 SiriusXM Satellite Radio features ......................................... 27 Content Alert................................................................................... 28 Setting reception restrictions ............................................... 30 Resetting the SiriusXM Satellite Radio settings ......... 31 Other External Components ..........................32 HDMI/AV-IN devices ................................................................... 32 Cameras .............................................................................................. 32 Using an external component via ADS adapter Maestro ....................................................................................... 33 Bluetooth Device ............................................34 Bluetooth mobile phone ......................................................... 34 Bluetooth mobile phone settings ...................................... 36 Bluetooth audio player ............................................................. 37 USB ......................................................................18 Playback operations .................................................................... 18 Video playback operations ..................................................... 19 Search operations ........................................................................ 20 Settings for USB playback ....................................................... 21 Settings ..............................................................39 Audio settings ................................................................................ 39 Display settings .............................................................................. 43 Input settings .................................................................................. 46 System settings.............................................................................. 47 Remote Controller ............................................50 Preparation ....................................................................................... 50 Basic operations (RM-RK258) ................................................. 51 Searching for an item directly .............................................. 51 Installation and Connection ...........................52 Before installation ........................................................................ 52 Installing the unit.......................................................................... 53 Removing the unit ....................................................................... 54 Installing the supplied GPS antenna ................................ 54 Connecting external components .................................... 55 Wiring connection ....................................................................... 56 References .........................................................57 Maintenance ................................................................................... 57 More information ......................................................................... 57 Troubleshooting ...............................................59 Specifications ....................................................63 Trademarks and Licenses ................................66 Important Notice on Software ............................................. 67 EULA ..................................................................................................... 67 2 ENGLISH 00_KW_M785BW_K.indb 2 00_KW_M785BW_K.indb 2 2022/07/25 9:44 2022/07/25 9:44 Component Names and Basic Operations Component Names and Basic Operations Monitor panel 1 2 3 4 5 6 7
(USB1)5V 1.5A 8 1 Remote sensor 2 Screen (touch panel) 3 Monitor panel 4 FNC -
button FNC (Press): Pops up the function menu (page 13)
(Hold): Changes the screen from the playback source to the others. While Apple CarPlay or Android Auto is connected, switches to the current background playback source screen and vice versa. While no device for Apple CarPlay or Android Auto is connected, switches to the current background playback source screen and the other setting-related screen, home screen, or source selection screen and vice versa. 5 6 button: (Press) Activates the voice recognition. When no device for Apple CarPlay, Android Auto, and Bluetooth phone is connected, pressing and holding this button displays Bluetooth pairing waiting dialog (page 7).
(Press): Turns on the power.
(Hold): Turns off the power.
(Press): Displays the Home screen (see the button following) while the power is on. 7 Volume +/ buttons 8 USB terminal from the rear panel The buttons on the monitor illuminate and change the color periodically with the unit turned on. To change the color, see page 44. Home screen You can customize the Home screen (pages 44 to 45) To display the Home screen from other screens, press the
button. Touching the operation keys performs the following actions:
1 The current playback source information. Displays the current playing source control screen. Touching [ < ] scrolls the text if not all of the text is shown. 2 Selects the playback source. To change the sources, see page 45. 3 Displays the <Settings> screen. 4 Displays the clock time and/or artwork screen. To change the information, see page 45. When you touch the clock time indication, you can move to the <Clock> screen, see page 5. 5 Displays all selectable playback sources and options. Turning on the power When you turn on this unit for the first time, you must wait while the system acquires GPS signals from satellites. This process could take up to several minutes. Apple CarPlay Where you are now in this <
Sat. Jan. 01 2022 Turning off the power On the monitor panel:
(Hold) 00_KW_M785BW_K.indb 3 00_KW_M785BW_K.indb 3 ENGLISH 3 2022/07/25 9:44 2022/07/25 9:44 Components Name and Basic Operations Components Name and Basic Operations On the screen:
1 Display the source/option selection screen. On the Home screen:
Turning off the AV source 1 Display the source/option selection screen. On the Home screen:
2 Turn off the power. On the source/option selection screen (page 12):
2 Turn off the AV source. On the source/option selection screen (page 12):
Adjusting the volume You can adjust the volume (00 to 40) by pressing + to increase and pressing to decrease. When volume level is below 15, holding + increases the volume continuously to level 15. Attenuating the sound On the source control screen:
. To cancel attenuation:
4 ENGLISH 00_KW_M785BW_K.indb 4 00_KW_M785BW_K.indb 4 You can also use the pop-up function menu
(page 13). Initial settings When you power on the unit for the first time or initialize the unit, the <Initial Settings> screen appears. Perform the initial settings. Initial Settings Demonstration ON OFF Language Front Camera Rear Camera User Customize Viewing Angle English Enter Enter Enter Enter Finish Once completed, Home screen appears.
<Demonstration> (page 45) ON (Initial): Activates the display demonstration. OFF: Deactivates the display demonstration.
<Language> (page 47) Select the text language used for on-screen information. English (Initial)/Espaol/Franais GUI Language (Local (the language selected above)
(Initial)/English): Selects the language used for displaying operation keys and menu items.
<Front Camera> (page 46) Make the settings to display the picture from the connected front view camera.
<Rear Camera> (page 46) Make the settings to display the picture from the connected rear view camera
<User Customize> (page 44) Change the display design.
<Viewing Angle> (page 46) Select the viewing angle in relation to the monitor to make the image on the screen easier to see. Under 0 (Initial)/5/10/15/20 2022/07/25 9:44 2022/07/25 9:44 Components Name and Basic Operations Components Name and Basic Operations Date and clock settings You can adjust the date and clock as follows using the
<System> screen. 1 Display the Home screen. 2 Display the <Settings> screen. On the Home screen:
3 Display the <System> screen (1), and then enter the item-setting screen you want to change (2). Settings Audio Language English Display Clock Input Time Format System Time Zone Key Clock Adjust Enter Enter Enter Enter Eg. when selecting <Clock>
4 Set or adjust the date and clock.
<Clock> *
Select the method to set the date and clock. GPS-SYNC (Initial): Synchronizes the clock time with GPS. Manual: Sets the clock manually using <Clock Adjust>. See the following. 00_KW_M785BW_K.indb 5 00_KW_M785BW_K.indb 5
<Time Format>
Select the time display format. 12-Hour (Initial)/24-Hour
<Time Zone>
Select the time zone for your residential area. Pacific Time (Initial)/Central Time/Mountain Time/Eastern Time, etc.
<Clock Adjust>. Touch [J]/[K] (1) to adjust the date (year/month/
date), and adjust the hour/minute. Touch [SET] (2) to finish setting the clock. Clock Adjust Year Month Date Hour Minute 2022
1
1 AM4
1 SET
<Daylight Saving Time>
(Not used when the clock is set manually) Activate this by selecting the additional time for Daylight Saving Time (if available in your residential area). OFF (Initial)/30min/1Hr In-Car Connections In-Car Connections To operate your smartphone hands-free, and Apps of the smartphone (Apple CarPlay, Android Auto, and USB MIrroring), the following connnections are required. For Wired Apple CarPlay (page 14), connect iPhone with USB. For Wireless Apple CarPlay (page 14), connect iPhone with Bluetooth (Wi-Fi is auto-connected). For Android Auto (page 16):
Android device with Android version 6.0 or later can be used with USB (In this case, Bluetooth is auto-connected, but Wi-Fi is not available) To wirelessly use Android Auto with this unit, connect Android device with Bluetooth (Wi-Fi is auto-connected) You need a compatible Android device (see below) with an active data plan. An Android device with Android version 11 or later and 5 GHz Wi-Fi (subject to local regulations*); or A Google-branded or Samsung-branded device with Android version 10; or A Samsung Galaxy S8, Galaxy S8+ or Note 8, with Android 9 You can find more information at
<g.co/androidauto/requirements>.
* You can also display the <Clock> screen by touching the clock
* Refer to the local regulations of your residential area. area if shown on the Home screen. ENGLISH 5 2022/07/25 9:44 2022/07/25 9:44 In-Car Connections In-Car Connections For USB Mirroring (page 17) connect the Android device both with USB and Bluetooth. For Hands-Free Phone (page 34) and Bluetooth audio player (page 37), connect your device with Bluetooth. For SiriusXM Connect Vehicle Tuner connection and its usage, see pages 24 and 55. For ADS adapter connection and its usage, see pages 33 and 55. For HDMI device connection and its usage, see pages 32 and 55. For AV-IN device connection and its usage, see pages 32 and 55. USB connection Bluetooth connection Connect your smartphone (iPhone or Android device) for using Apps on the screen of this unit. You can also connect a USB mass storage class device such as a USB memory, digital audio player, etc. to the unit. But you cannot connect a PC, portable HDD and USB hub. iPhone/Android device A B USB device
(USB1)5V 1.5A USB terminal from the rear panel A For connecting your Android device, use the USB cable (commercially available) B For connecting your iPhone, use the USB cable for iPhone KS-U62 (optional accessory) Information for using Bluetooth devices Bluetooth is a short-range wireless radio communication technology for mobile devices such as mobile phones (smartphones), portable PCs, and other devices. Bluetooth devices can be connected without cables and communicate with each other. Some Bluetooth devices may not be used with this unit depending on the Bluetooth version of the device. Pairing a Bluetooth device When you connect a Bluetooth device to the unit for the first time, register the device to this unit (pairing). Pairing allows Bluetooth devices to communicate with each other. The pairing method differs depending on the Bluetooth version of the device. For devices with Bluetooth 2.1:
You can pair the device and the unit using SSP
(Secure Simple Pairing) which only requires confirmation. For devices with Bluetooth 2.0:
You need to enter a PIN code both on the device and the unit for pairing. 6 ENGLISH 00_KW_M785BW_K.indb 6 00_KW_M785BW_K.indb 6 2022/07/25 9:44 2022/07/25 9:44 In-Car Connections In-Car Connections Once the connection is established, it is registered in the unit until you initialize the Bluetooth settings
(page 48) or the unit itself (page 49). Up to five devices can be registered in total. To use the Bluetooth function, you need to turn on the Bluetooth function of the device. Auto pairing When <Auto Pairing> is set to [ON] (page 37), Bluetooth devices are automatically paired. For iPhone with Apple CarPlay and Android device with Android Auto: When the device is connected via USB, it is automatically paired regardless of this setting. Automatic Wi-Fi connections This unit is equipped with the Wi-Fi function. You can turn on or off the Wi-Fi function on the
<Wireless SETUP> settings. To use the Wi-Fi function, select [Wi-Fi] (page 49). Once your iPhone or Android device is paired successfully with Bluetooth or connected with USB for Apple CarPlay or for Android Auto, it is automatically connected with Wi-Fi. And from the next time on, it is automatically connected through Wi-Fi. Turn on the Bluetooth and Wi-Fi functions on your iPhone or Android device. It is necessary to connect the GPS antenna in order to use wireless Apple CarPlay. Pairing a Bluetooth device using SSP
(for Bluetooth 2.1) 1 Display the Home screen. 2 Display the <Device List> screen. From the Home screen (page 3), touch as follows:
Then, on the <Settings> screen, touch as follows:
[System] <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, touch as follows:
<Device List> : [Enter]
You can also use the pop-up function menu to display the <Device List> screen (page 13). 3 Make the unit ready for pairing. On the <Device List> screen:
Please open Bluetooth settings on your device and select the device name below KW-MXXXXX Cancel 4 Search for the unit KW-M785BW from your Bluetooth device. 5 Confirm the request both on the device and the unit. On the device:
Confirmation method varies for the device. On the unit:
BT Pairing request To perform BT Pairing Please confirm the device display KW-MXXXXX (device name) 012345 (PIN code) Pair Cancel Pairing is complete. To reject the request: Touch [Cancel]. 6 Register the usage of the Bluetooth device. See "Registering the usage of the devices" on page 9. 00_KW_M785BW_K.indb 7 00_KW_M785BW_K.indb 7 ENGLISH 7 2022/07/25 9:44 2022/07/25 9:44 In-Car Connections In-Car Connections Once pairing is completed... For iPhone compatible with wireless Apple CarPlay A confirmation message appears. Touch [Yes] to displays the Apple CarPlay screen for wireless connection. Touch [No] not to use Apple CarPlay for the time being. To use Apple CarPlay, select it on the
<Device List> screen. For Android device compatible with Android Auto When [Android Auto] (initial) is selected for the
<Android Mode Select> setting (page 11), Android Auto is automatically activated, and this Android device is registered as Android Auto device. If Apple CarPlay is active currently, a warning message may appear, asking whether Android Auto or Apple CarPlay is to be used (depending on iPhone version). 4 Make the unit ready for pairing. On the <Device List> screen:
Please open Bluetooth settings on your device and select the device name below KW-MXXXXX Cancel 5 Search for the unit KW-M785BW from your Bluetooth device. 6 Select the unit KW-M785BW on your Bluetooth device. Pairing is complete. 7 Register the usage of the Bluetooth device. See "Registering the usage of the devices" that follows. Once pairing is completed, see the leftmost column. For iPhone compatible with wreless Apple CarPlay For Android device compatible with Android Auto Pairing a Bluetooth device using a PIN code
(for Bluetooth 2.0) 1 Display the Home screen. 2 Display the <PIN Code Set> screen. From the Home screen (page 3), touch as follows:
Then, on the <Settings> screen, touch as follows:
[System] <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, touch as follows:
<PIN Code> : [Enter]
3 Enter the PIN code. PIN Code Set 0000 1 4 7 2 5 8 0 3 6 9 Enter Clear Initial PIN code : [0000]
If you do not need to change the PIN code [0000], just touch [Enter]. To change the PIN code, see page 11. 8 ENGLISH 00_KW_M785BW_K.indb 8 00_KW_M785BW_K.indb 8 2022/07/25 9:44 2022/07/25 9:44 In-Car Connections In-Car Connections Registering the usage of the devices You can confirm and change the usage (profile) of the registered devices on the <Device List> screen. You can also connect/disconnect and delete unwanted devices on the device list. 1 Display the <Device List> screen. From the Home screen (page 3), touch as follows:
Then, on the <Settings> screen, touch as follows:
[System] <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, touch as follows:
<Device List> : [Enter]
Device List Device Name 1 Device Name 2 Device Name 3 Device Name 4 Device Name 5 Device Name 6 The currently activated (connected) devices are highlighted on the list. Six devices can be displayed on the list; five devices connected by Bluetooth and one by USB. You can also use the pop-up function menu to display the <Device List> screen (page 13). Touch [ < ] scrolls the text if not all of the text is shown. For list/setting screen operations, see also page 13. 2 Select the device you want to use. 4 Touch [Close] to finish. The <Device List> screen is displayed again. This unit searches for the device you have just set the usage (profile) for, and activates the device if it is connected. Device List Device Name 1 Device Name 2 Device Name 3 Device Name 4 Device Name 5 Device Name 6 When Apple CarPlay or Android Auto is activated for the selected device, it will be disconnected. A warning message appears. Touch [Yes] to continue. 3 Select the profile for the selected device. Please Select a profile TEL(HFP)1 TEL(HFP)2 Audio(A2DP) / APP(SPP) USB Mirroring Close
[TEL(HFP)1]/[TEL(HFP)2]: To use the device as hands-free phone 1 and 2.
[Audio(A2DP)/APP(SPP)]: To use the device as Bluetooth audio or Apps (Apple CarPlay/Android Auto).
[USB Mirroring]: To use the device as USB Mirroring. About the profile icons Available profile for the listed devices are in white. When the profile is active for the devices, it becomes blue. Unavailable device and profile are in gray. Bluetooth icon is displayed only when the device is connected by Bluetooth. Apple CarPlay and Android Auto icons illuminate when they are active. Mirroring icon is displayed when the device is selected as Mirroring in profile setting. Icon Profile Status (on/off/unavailable) Bluetooth Bluetooth connection HFP1 Hands-Free phone 1 HFP2 Hands-free phone 2 A2DP Bluetooth audio player SPP Apps Apple CarPlay Android Auto Apple CarPlay Android Auto Mirroring USB Mirroring 00_KW_M785BW_K.indb 9 00_KW_M785BW_K.indb 9 ENGLISH 9 2022/07/25 9:44 2022/07/25 9:44 In-Car Connections In-Car Connections Adding the registered devices 1 Display the <Device List> screen. From the Home screen (page 3), touch as follows:
Deleting the registered devices 1 Display the <Device List> screen. From the Home screen (page 3), touch as follows:
Then, on the <Settings> screen, touch as follows:
[System] <Connections SETUP> : [Enter]
Then, on the <Settings> screen, touch as follows:
[System] <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, touch as follows:
<Device List> : [Enter]
2 Activate registration. On the <Device List> screen:
On the <Connections SETUP> screen, touch as follows:
<Device List> : [Enter]
2 Display the <Device Remove> screen. On the <Device List> screen:
3 Select the device you want to delete. 3 Follow the procedure previously explained. Pairing a Bluetooth device using SSP
(for Bluetooth 2.1), see page 7. Pairing a Bluetooth device using a PIN code
(for Bluetooth 2.0), see page 8. Device Remove All All CP Device 1 Device 2 Delete Device 3 AAP Device 1 BT Device 1 To select all devices, touch [
To deselect all devices, touch [
]. 4 Touch [Delete]. A warning message appears. Touch [Yes] to delete. Connections setting You can change various settings for the connected devices. 1 Display the <Connections SETUP> screen. From the Home screen (page 3), touch as follows:
Then, on the <Settings> screen, touch as follows:
[System] <Connections SETUP> : [Enter]
On the <Connections SETUP> screen, you can change and confirm the following item settings. For list/setting screen operations, see also page 13. Connections SETUP Device List PIN Code Enter 0000 Device Name Bluetooth Device Address
(Model name) 00:00:00:00:00:00:00 Initialize TEL SETUP Enter Enter Connections SETUP Wi-Fi Setup Device Audio Control Enter Enter Driving Position Left Right Android Mode Select Reset Android Auto Wireless Connection Enter Enter 10 ENGLISH 00_KW_M785BW_K.indb 10 00_KW_M785BW_K.indb 10 2022/07/25 9:44 2022/07/25 9:44 In-Car Connections In-Car Connections
<Device List>
Devices connected for Apple CarPlay, Android Auto, USB Mirroring, Bluetooth phone, and Bluetooth audio are listed. You can check their names and their status on the list (page 9).
<PIN Code>
To change the PIN code, enter a new PIN code and touch [Enter] to finish To correct the PIN code input, touch and hold
[Clear], and re-enter a new PIN code. This setting is available only when iPhone with Apple CarPlay is not connected.
<Device Name>
Shows the device name of this unit to be shown on the Bluetooth device KW-M785BW.
<Bluetooth Device Address>
Shows the Bluetooth device address of this unit.
<Initialize>
Initialize the Bluetooth settings (page 48).
<TEL SETUP>
See step 2 on page 37. This setting is available only when iPhone with Apple CarPlay is not connected.
<Wi-Fi Setup>
Shows the device name, device address and password of this unit.
<Device Audio Control>
Go to step 2.
<Driving Position>
Sets your drivers seat position of your car [LEFT]
(initial) or [RIGHT]. This setting changes the sidebar/button position of Apple CarPlay/Android Auto screens accordingly with the driver seat position. This setting is available only when iPhone with Apple CarPlay and Android device with Android Auto are not connected.
<Android Mode Select>
Selects Android device usage for Apps either
[Android Auto] (initial) (page 16) or [Mirroring for Android] (page 17). This setting is available only when AV source is turned off with no device connected via USB.
<Reset Android Auto Wireless Connection>
Reset Android Auto wireless connection when you want to change the password for wireless connection manually. The system of this unit is rebooted after touching [Yes]. 2 Touch [ENTER] to display the selected item screen. On the <Device Audio Control> screen:
Device Audio Control Guidance/Voice Recognition Volume Phone Incoming Volume Phone Calling/Talking Volume Speech Quality Adjust Media Volume Enter Enter Enter Enter 15
<Guidance/Voice Recognition Volume> can be set separately for <Apple CarPlay> and
<Android Auto> within the range of 00 to 40
(Initial: 19).
<Phone Incoming Volume>, <Phone Calling/
Talking Volume> can be set separately for
<Apple CarPlay> and <Android Auto/
Bluetooth> within the range of 00 to 40 (Initial:
15).
<Speech Quality Adjust>:
<Microphone Level> can be set within the range of 10 to +10 (Initial: 4).
<Echo Cancel Level>, <Noise Reduction Level> can be set within the range of 5 to +5
(Initial: 0).
<Media Volume> can be set within the range of 00 to 40 (Initial: 15). 00_KW_M785BW_K.indb 11 00_KW_M785BW_K.indb 11 ENGLISH 11 2022/07/25 9:44 2022/07/25 9:44 Various Screens and Operations Various Screens and Operations You can display or change to other screens at any time to show information, change the playback source, change the settings, etc. Source/option selection screen Touch [
option selection screen.
] on the Home screen to display the source/
Camera Apps SETUP Now Playing Bluetooth Audio Apple CarPlay Android Auto Bluetooth Audio Phone USB AV-IN Tuner SiriusXM USB Mirroring HDMI AV Off Maestro Power Off
[Apple CarPlay] Displays the home screen of Apple Source control screen You can operate the playback source using the source control screen. The operation keys and information displayed vary for each source. Here the common operation keys are explained. For more about the other operation keys, see the respective page of each source section. CarPlay.
[Android Auto]
Displays the home screen of Android Auto.
[Bluetooth Audio]
Plays a connected Bluetooth audio player.
[Phone]
[USB]
[AV-IN]
[Tuner]
[SiriusXM]
Displays the phone control screen. Plays files on a USB device. Switches to the external AV component connected to the AV-
IN input terminal. Switches to the radio broadcast. Switches to the SiriusXM radio broadcast. Touching the operation keys performs the following actions:
[USB Mirroring] Displays the screen of USB Mirroring.
[HDMI]
[AV Off]
[Maestro]
Switches to the HDMI device. Turn off the AV source. Switches to the Maestro option screen.
[Power Off]
Turns off the power. To return to the Home screen Press the
[X].
button on the monitor panel or touch
[Camera]
Switches to the camera view.
[Apps]
Switches to the currently available Apps [Apple CarPlay] or
[Android Auto].
[Now Playing]
Displays the source currently played back.
[SETUP]
Displays the <Settings> screen.
[X]
Close the screen and return to the Home screen. 12 ENGLISH 00_KW_M785BW_K.indb 12 00_KW_M785BW_K.indb 12 1 Current playback source icon and name Touch [ > ] to show the source icons on the Home screen. Then touch [ < ] to hide the other icons. 2 Content information area Touch [ < ] to scroll the text if not all of the text is shown. Touch [ < ] to widen the window to show more detailed information. Then touch [ > ] to close the window. 3 Phone control screen indicator Touch to display the phone control screen (page 35). 2022/07/25 9:44 2022/07/25 9:44 Various Screens and Operations Various Screens and Operations 4 Sound attenuating key (page 4) 5 TEL indicator is shown when a hands-free phone is connected. 6 Clock display 7 Operation window tab Touch [ > ] to widen the operation window to show more operation keys besides those shown on the operation key area (p). Then touch [ < ] to close the window. 8 TI indicator (page 22) 9 SiriusXM signal strength indicator (page 25) p Operation key area Using gesture control You can also control playback by moving your finger on the touch panel as follows (for some sources, the gesture control is not available). Sliding the finger up/down:
Selects a folder. Sliding the finger left/right:
Selects a file. Moving your finger clockwise/counterclockwise:
Increases/decreases the volume. Using the pop-up function menu You can easily access the frequently used features. 1 Display the pop-up function menu. To close the pop-up function menu Press FNC-
on the monitor panel or touch the screen anywhere other than the pop-up function menu. List/setting screen Below are the common operation keys which appear on the list/setting screen. The appearance or location of the operation keys may differ, however the similar operation keys have the same operations. Available operation keys differ depending on the setting screens. Not all these operation keys are shown on every screen. Play A-Z Top Up 2 Touch one of the following items you want to use.
Displays the <Device List> screen
(page 9).
(Touch) Switches the screen.
(Hold) Turns off the screen. Displays the <Settings> screen
(page 39). Displays the <User Customize>
screen and you can change the background screen (page 44). Displays the <Screen Adjustment> screen (page 46). Displays the view from the connected camera (page 33).
* You can change the last four items to display on the pop-up function menu. For details, see <Key Customize> on page 49. 00_KW_M785BW_K.indb 13 00_KW_M785BW_K.indb 13 ENGLISH 13 2022/07/25 9:44 2022/07/25 9:44 Various Screens and Operations Various Screens and Operations AppsApps Touching the operation keys performs the following actions:
1 Return to the upper layer.*1 2 Finishes the setting and closes the current screen. 3 Plays all files in the folder containing the current file.*2 4 (Not displayed for folder list) Enters alphabet search You can use the Apps installed in your iPhone and Android device by using Apple CarPlay, Android Auto, and USB Mirroring. For iPhone: You can use Apple CarPlay (see the following). For Android device: You can use Android Auto
(page 16) and USB Mirroring (page 17). Compatible iPhone devices You can use Apple CarPlay with the following iPhone models. iPhone 6S, 6S Plus, 7, 7 Plus, 8, 8 Plus, X, XS, XS Max, XR,11, 11 Pro, 11 Pro Max, SE (1st/2nd generation),12, 12 mini, 12 Pro, 12 Pro Max, 13, 13 mini, 13 Pro, 13 Pro Max to list the items in alphabetical order. *2 When a key pad is displayed, the follow the procedure below. 1 Touch the first letter you want to search for. To search by a number, touch [1,2,3...]. To search by a symbol, touch [#]. 2 Select your desired item on the search result list. 5 Returns to the root folder.*2 6 Return to the upper layer.*2 7 Changes the page to display more items. 8 Returns to the previous screen.
*1 0nly for Bluetooth Audio
*2 0nly for USB Preparation:
Make sure that the microphone is connected (page 56). Connecting iPhone compatible with Apple CarPlay See pages 5 to . If two iPhone devices compatible with Apple CarPlay are connected wirelessly, the device recognized first is used for Apple CarPlay. To use the other iPhone, select it on the <Device List> screen. Using Apps of iPhone Apple CarPlay About Apple CarPlay Apple CarPlay is a smarter, safer way to use your iPhone in the car. Apple CarPlay takes the things you want to do with iPhone while driving and displays them on the screen of this unit. You can get directions, make calls, send and receive messages, and listen to the music from iPhone while driving. You can also use Siri voice control to make it easier to operate iPhone. For details about Apple CarPlay, visit
<https://apple.com/ios/carplay/>. 14 ENGLISH 00_KW_M785BW_K.indb 14 00_KW_M785BW_K.indb 14 2022/07/25 9:44 2022/07/25 9:44 AppsApps Starting Apple CarPlay Apple CarPlay screen operation Using Siri Once the wireless setting and connection is done for the first time, the source is automatically changed, and you can use of the Apps of the connected iPhone. Unlock your iPhone beforehand. You cannot use Apple CarPlay when the screen recording function is enabled on the iPhone. To change the source from the others Touch [Apple CarPlay] on the source/option selection screen (page 12). Camera Apps SETUP Now Playing Bluetooth Audio Apple CarPlay Android Auto Bluetooth Audio Phone USB AV-IN Tuner SiriusXM USB Mirroring HDMI AV Off Maestro Power Off The Apple CarPlay screen is displayed. 00_KW_M785BW_K.indb 15 00_KW_M785BW_K.indb 15 You can use the Apps of the connected iPhone. The items displayed and the language used on the screen differ among the connected devices. You can activate Siri while the Apple CarPlay screen is displayed. On the monitor panel:
1 Press the 2 Talk to Siri through the microphone. button on the monitor panel. To deactivate Siri, press the button again. 1 Application buttons Starts the application. 2 Short cut buttons 3 [
] button
(Touch) Displays the home screen of Apple CarPlay.
(Hold) Activates Siri. 4 [HOME] button*
Exits the Apple CarPlay screen and displays the Home screen.
* This icon design may change depending on the iOS version. To exit the Apple CarPlay screen Touch [HOME] on the Apple CarPlay screen, or press button on the monitor panel. the
On the Apple CarPlay screen:
1 Touch and hold [
2 Talk to Siri through the microphone. To deactivate Siri, touch [
]. Switching the Apple CarPlay screen and the current playback source screen You can switch the Apple CarPlay screen and the current playback source screen when the App of the Apple CarPlay without audio-output is used. Press and hold FNC-
monitor panel. Each time you press and hold the button, the screen button on the alternates. You can also use the pop-up function menu
(page 13). The screen cannot be switched in some cases, such as while the picture from the connected camera or a message window is displayed. ENGLISH 15 2022/07/25 9:44 2022/07/25 9:44 AppsApps Using the Apps of an Android device Android Auto About Android Auto Android Auto enables you to use features of your Android device convenient for driving. You can easily access route guidance, make calls, listen to music, and access convenient features on the Android device while driving. For details about Android Auto, visit <https://www. android.com/auto/> and <https://support.google. com/androidauto>. Compatible Android devices See page 5. Starting Android Auto Selecting [Android Auto] on the screen displays the Android Auto screen and enable use of the Apps of the connected Android device. Unlock your Android device beforehand. Operation buttons on the Android Auto screen You can perform the operations of the Apps of the connected Android device. The items displayed on the screen differ among the connected Android device. Preparation:
Select [Android Auto] for the <Android Mode Select> setting (page 11). To change the source from the others Touch [Android Auto] on the source/option selection screen (page 12). Camera Apps SETUP Now Playing Bluetooth Audio 1 1 Application/information buttons Starts the application or displays information. Connecting an Android device compatible with Android Auto See pages 5 to . Apple CarPlay Android Auto Bluetooth Audio Phone USB AV-IN Tuner SiriusXM USB Mirroring HDMI AV Off If two Android devices compatible with Android Auto are connected wirelessly, the device recognized first is used for Android Auto. To use the other Android device, select it on the <Device List> screen. Bluetooth mobile phone currently connected is disconnected when Android device with Android Auto is connected with Bluetooth. Maestro Power Off The Android Auto screen is displayed. To exit the Android Auto screen Press the button on the monitor panel.
Using voice guidance of the Android device You can activate the voice guidance of the Android device while the Android Auto screen is displayed. 1 Press the button on the monitor panel. The voice guidance is activated. 2 Speak to the microphone to operate the Android device. 16 ENGLISH 00_KW_M785BW_K.indb 16 00_KW_M785BW_K.indb 16 2022/07/25 9:44 2022/07/25 9:44 AppsApps To cancel the voice guidance, press the button. Each time you press the button, the voice guidance turns on and off. Switching the Android Auto screen and the current playback source screen You can switch the Android Auto screen and the current playback source screen when the App of the Android Auto without audio-output is used. Press and hold FNC-
monitor panel. Each time you press and hold the button, the screen button on the alternates. You can also use the pop-up function menu
(page 13). The screen cannot be switched in some cases, such as while the picture from the connected camera or a message window is displayed. Using the Apps of an Android device USB Mirroring This feature is only used with Android device. By installing JVCs Mirroring OA App into your Android device, the screen of the Android device is displayed on the monitor panel of this unit, and you can operate the Android device using the touch panel of this unit. For details about JVCs Mirroring, visit
<https://www.jvc.net/cs/car/>. Compatible Android devices Android version 7.0 or later Installing JVCs Mirroring OA App You can obtain Mirroring OA for JVC in Google Play. Make sure to install the most recent version into your Android device. When you use Mirroring OA for JVC for the first time, the terms of service are displayed. It is necessary to agree to the terms of service to use this feature. Connecting an Android device with JVCs Mirroring OA App installed Connect an Android device with JVCs Mirroring OA App installed via both USB and Bluetooth connection
(page 6). Starting USB Mirroring Preparation:
Unlock your Android device beforehand. Make sure that the JVCs Mirroring OA App is installed. Select [Mirroring for Android] for the <Android Mode Select> setting (page 11). 1 Connect the Android device. 1 Connect the device with Bluetooth. Pair the device with the unit via Bluetooth. See "Pairing a Bluetooth device"" on page 6. Select [USB Mirroring] on the profile setting of the <Device List> screen (page 9). 2 Then, connect the device with USB. Then follow steps 2 to 4 below on the Android device screen:
2 Touch the icon of JVCs Mirroring OA App. 3 Touch [OK] to start JVCs Mirroring OA App. 4 Touch [Start now] to capture the Android device screen to the screen of this unit. 00_KW_M785BW_K.indb 17 00_KW_M785BW_K.indb 17 ENGLISH 17 2022/07/25 9:44 2022/07/25 9:44 AppsApps USBUSB 5 Touch [USB Mirroring]. On the source/option selection screen (page 12). Camera Apps SETUP Now Playing Bluetooth Audio Apple CarPlay Android Auto Bluetooth Audio Phone USB AV-IN Tuner SiriusXM USB Mirroring HDMI AV Off Maestro Power Off The Android device screen is displayed on the monitor screen of this unit. You can access your Android device from this unit. To exit the Android device screen Press the button on the monitor panel.
Playback operations Starting playing the USB All files in the USB device will be played repeatedly until you change the source or disconnect the USB device. When no USB device is connected:
Connect a USB device to the USB terminal. The playback source changes to [USB] and playback starts. When a USB device is already connected:
Select [USB] as the source. From the Home screen (page 3), touch as follows:
Playback information and key operation USB 1 Displays/hides the following operation keys
Selects a folder.
Selects repeat playback mode by touching repeatedly.*
[MODE]
Displays the <USB Mode> screen. 2 Jacket picture (artwork) is shown if any 3 Playing time/playback status 4 Content information Touching [ < ] scrolls the text if not all of the text is shown. 5 Operation keys
Displays the <Equalizer> screen
(page 39).
Displays the search method selection window.
[S]/[T]
(Touch) Selects a file.
(Hold) Reverses/forwards search.
[IW]
Starts/pauses playback. Selects random playback mode.*
6 Repeat/Random mode indicator 7 File type indicator (MUSIC/MOVIE/PICTURE) 8 Current playback file information
(file type/folder no./file no.)
* You cannot activate repeat playback mode and random playback mode at the same time. 18 ENGLISH 00_KW_M785BW_K.indb 18 00_KW_M785BW_K.indb 18 2022/07/25 9:44 2022/07/25 9:44 USBUSB Selecting the file type to play You can specify the file type to play. USB Video playback operations While watching a video, you can use the following features. Video menu control Menu Control Touch screen operations File type Audio Select the file type as follows:
[Audio]
[Video]
[Photo]
Plays back audio files. Plays back video files. Plays back still picture files (Slide Show). You can select the picture to use for display background (see <User Customize> on page 44). If the USB contains no files of the selected type, the message "No File" appears. In this case, select the correct file type. Touching the operation keys performs the following actions:
1
Touching the numbered areas above performs the following actions:
1 Displays the video menu control. 2 Displays the video source control screen. 3 Goes to the previous file. 4 Goes to the next file. Displays the <Aspect> screen. Touch [ Aspect] to select the aspect ratio.
<Full>: For 16:9 original pictures 4:3 signal 16:9 signal
<Normal>: For 4:3 original pictures 4:3 signal 16:9 signal
<Auto>: The aspect ratio is automatically selected to match the incoming signals. 00_KW_M785BW_K.indb 19 00_KW_M785BW_K.indb 19 ENGLISH 19 2022/07/25 9:44 2022/07/25 9:44 USBUSB
Displays the <Screen Adjustment>
screen. 1 Touch [DIM ON] or [DIM OFF] to turn on or off the dimmer. 2 Touch [+]/[] to adjust the other items.
<Contrast>: Adjusts the contrast
(10 to +10).
<Bright>: Adjusts the brightness
(15 to +15).
<Color>: Adjusts the color
(10 to +10).
<Tint>: Adjusts the tint (10 to +10). Video source control screen USB
<Category Search>
This is only used for audio files. To change the file type, see page 19. 1 Select your desired category. Category List Artists Albums Genres Songs Play A-Z Top Up List of the selected category appears. 2 Select your desired file on the list . Search operations You can search files to play. 1 Display the search method selection screen. On the source control screen:
2 Select the search method. Folder List Category List Link Search Folder List Play Top Up
[Category List]
Search a file by its category (only for audio files).
[Link Search]
Search a file of the same artist/
album/genre with the audio file currently selected.
[Folder List] Select a file in the folder list. 1 File type 2 Playback status 3 Current playback folder no./file no. 4 Playing time 5 Playback mode indicator (Repeat/Random) 3 Follow the following procedure for
<Category List>, <Link Search> and
<Folder List>. For list screen operations, see also page 13. 20 ENGLISH 00_KW_M785BW_K.indb 20 00_KW_M785BW_K.indb 20 2022/07/25 9:44 2022/07/25 9:44 USBUSB
<Link Search>
This is only used for audio files. To change the file type, see page 19. 1 Select the tag information. Link Search Artist name Album title Genre Play A-Z Top Up
<Folder List>
Settings for USB playback Select the folder, and then the item in the selected folder. 1 Display the <USB Mode> screen. On the source control screen:
Folder List Folder name 1 Folder name 2 Audio file 1 Audio file 2 Video file 1 Play Top Up 2 Make the settings. USB Mode Drive Select Next
<Drive Select>
Next: Switch between internal memory and the memory source of the connected device (such as mass storage device). List of the contents containing the same tag with the file currently playing file is displayed. 2 Select your desired file on the list. Touching [ < ] scrolls the text if not all of the text is shown. 00_KW_M785BW_K.indb 21 00_KW_M785BW_K.indb 21 ENGLISH 21 2022/07/25 9:44 2022/07/25 9:44 Tuner Tuner Listening to the radio This unit alarms you emergency when receiving an alarm signal from FM broadcast. Select [Tuner] as the source. From the Home screen (page 3), touch as follows:
The last station you selected is tuned in, and the source control screen for the station is displayed. Playback information on the source control screen TUNER 1 Selects the band (AM/FM1/FM2/FM3) Each time you touch [FM], FM band changes in
[TI]
order of FM1, FM2, and FM3. 2 Station information area Touching [ < ] scrolls the text if not all of the text is shown. Touching [Radio Text] switches between [Radio Text], [Radio Text Plus] and [PTY]. 3 Current station frequency 4 Displays the preset stations window (page 24) To hide the window, touch [ > ]. 5 [P1] [P5]
(Touch) Selects a preset station.
(Hold) Presets the current station. 6 Displays/hides the following operation keys
[SSM ]
[MONO]
(For FM stations)
(Hold) Preset the stations automatically.
(For FM stations) Activates monaural mode for better FM reception
(stereo effect will be lost). The MONO indicator lights up. To deactivate, touch [MONO]
again.
(For FM RDBS stations) Activates TI Standby Reception mode. When TI is activated, the unit is ready to switch to Traffic Information if available. The TI indicator lights up in white. If the TI indicator lights up in orange, tune in to another station providing Radio Broadcast Data System signals. The volume adjustment made for Traffic Information is automatically memorized and used. To deactivate, touch [TI] again.
[MODE]
(For FM stations) Displays the
<Tuner Mode> screen. 7 Indicators TI: Lights up white when receiving the traffic information, and lights in orange when TI Standby Reception is on standby. ST: Lights up when receiving a stereo broadcast MONO: Lights up when receiving stations in monaural forcibly. AUTO1/AUTO2/MANU: Seek mode indicator 22 ENGLISH 00_KW_M785BW_K.indb 22 00_KW_M785BW_K.indb 22 2022/07/25 9:44 2022/07/25 9:44 Tuner Tuner 8 Operation keys
Displays the <Equalizer> screen
(page 39).
[PTY]
[SEEK]
(For FM RDBS stations) Enters PTY search mode. 1 Touch [PTY]. 2 Touch and hold a PTY code to search for. If there is a station broadcasting a program of the same PTY code as you have selected, that station is tuned in. Selects the seek mode for [S]/
[T]. AUTO1 (Initial): Auto search AUTO2: Tunes in preset stations one after another MANU: Manual search Setting the tuner mode Presetting stations in the memory You can change the tuner channel interval setting depending on the area where you use this unit. 1 Display the <Tuner Mode> screen. On the source control screen:
2 Select the area where you use this unit. Tuner Mode Area Setting US SA Europe You can preset five stations each for AM and FM1/
FM2/FM3. Automatic presetting SSM (Strong-
station Sequential Memory) (For FM only) 1 Select the FM band (1 3) On the source control screen:
FM1 FM3 2 Start SSM.
(Hold) The local stations with the strongest signals are found and stored automatically.
[S]/[T]
Searches for a station. The search method differs
[US] (initial) according to the selected setting for [SEEK] (see above).
[SA]
[Europe]
Select this when using this unit in North/Central/South America. FM and AM intervals are set to 200 kHz and 10 kHz respectively. Select this when using this unit in South American countries where the FM interval is 50 kHz and AM interval is 10 kHz. Select this when using this unit in any other areas. FM and AM intervals are set to 50 kHz and 9 kHz respectively. 00_KW_M785BW_K.indb 23 00_KW_M785BW_K.indb 23 ENGLISH 23 2022/07/25 9:44 2022/07/25 9:44 Tuner Tuner Manual presetting Selecting a preset station 1 Select the band, and then tune in to a station you want to preset. On the source control screen:
FM1 FM3 1 Select the band, and then display the preset station window. On the source control screen:
FM1 FM3 SiriusXM Satellite Radio SiriusXM Satellite Radio Only SiriusXM brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Connect Vehicle Tuner and subscription are required. For more information, visit <www.siriusxm.com>. Connecting SiriusXM Connect Vehicle Tuner 2 Select a preset station. See page 55. 2 Select a preset number to store into. TUNER AM FM1 TUNER AM FM1 P1 FM1 P2 FM1 P3 FM1 P4 FM1 P5 FM1 P1 FM1 P2 FM1 P3 FM1 P4 FM1 P5 FM1
(Hold) Activating subscription 1 Check your Radio ID. The SiriusXM Satellite Radio ID is required for activation and can be found by tuning to Channel 0 as well as on the label found on the SiriusXM Connect Vehicle Tuner and its packaging. The Radio ID does not include the letters I, O, S or The station selected in step 1 is stored into the preset number [P1] to [P5] you have selected. To show the details of the item, touch [ < ]. You can also select a preset channel by touching
[P1] [P5]. To hide the window: Touch [ > ]. F. 2 Activate the subscription. For users in the U.S.A.:
Online:
24 ENGLISH 00_KW_M785BW_K.indb 24 00_KW_M785BW_K.indb 24 Visit <www.siriusxm.com/activatenow>
Phone: Call SiriusXM Listener Care at 1-866-635-2349 For users in Canada:
Online: Visit <www.siriusxm.ca/activate>
Phone: Call XM Customer Care at 1-888-539-7474 3 Confirm the activation. A confirmation message appears. Touch [Return]. 2022/07/25 9:44 2022/07/25 9:44 SiriusXM Satellite Radio SiriusXM Satellite Radio Listening to the SiriusXM Satellite Radio Select [SiriusXM] as the source. From the Home screen (page 3), touch as follows:
[SEEK]
Activates or deactivates the content alert for traffic and weather. Changes the seek mode for [CHJ]/
[CHK]. SEEK1 (Initial): Skips to another available channel. SEEK2: Skips to another preset channel.
[S]/[T] Controls playback during content replay.
[SCAN]
Starts TuneScan.
[Live]
[Direct Channel]
Switches between replay mode and live broadcast. Enter the channel number to select a channel. Changes the page in the window to display other operation keys. 2 Displays album artwork for most SiriusXM music channels (cache real-time images for current channel only) 3 Station (channel) information area a Channel name Touching [
contents in b, c, and d as follows.
] changes the displayed b Artist Category c Song title Channel description d Information Related channel Touching [ < ] scrolls the text if not all of the text is shown. 4 Displays the preset channel window (Page 27) To hide the window, touch [ > ]. 5 [P1] [P5]
(Touch) Selects a preset channel.
(Hold) Presets the current channel. 6 Selects the band (SXM1/SXM2/SXM3/SXM4) The channel no. currently selected is displayed. 7 Playback status and time code for the buffered data and replay mode The time code shows you the point in the replay buffer you are listening to. (E.g. 5:00 means that you are listening to audio that is 5 minutes behind the current broadcast.) 8 SiriusXM signal strength indicator 9 Seek mode indicator p Replay time bar for replay mode Gray: The remaining capacity Red: The amount of buffered contents q Operation keys
[IW]
[CHJ]/
[CHK]
Displays the <Equalizer> screen
(page 39). Displays the <Channel List> screen. Starts/pauses the content replay. Selects the channel. To select all channels, make sure
[SEEK1] is selected as the seek mode. To select only preset channels, make sure [SEEK2] is selected as the seek mode. ENGLISH 25 2022/07/25 9:44 2022/07/25 9:44 The last channel you selected is tuned in, and the source control screen for the channel is displayed. Playback information on the source control screen M SriusXM 1 Displays/hides the following operation keys
[MODE]
Displays the <SiriusXM Mode>
screen.
(Hold) Registers the current artist to the alert contents.
(Hold) Registers the current song to the alert contents. 00_KW_M785BW_K.indb 25 00_KW_M785BW_K.indb 25 SiriusXM Satellite Radio SiriusXM Satellite Radio Selecting a channel You can select the channel by directly entering channel number or by selecting it on the channel list. Selecting a channel directly When you enter the channel number of parental-
locked channel (page 30), the <Parental Code Check> screen appears. Enter the correct parental code to access the channel. 1 Display the <Direct Channel> entry screen. On the source control screen:
2 Enter the channel number (1), and then confirm (2). Direct Channel
Clear Enter To correct misentry, touch [Clear]. 26 ENGLISH 00_KW_M785BW_K.indb 26 00_KW_M785BW_K.indb 26 Selecting a channel on the list 1 Display the <Channel List> screen. On the source control screen:
Presetting channels in the memory You can preset five channels for each band. 1 Select the band, and then tune in to a channel you want to preset. On the source control screen:
2 Select a category (1), and then select a channel (2). Channel List Channel All Channels 100Ch Channel Name Category Name 1 105Ch Channel Name Category Name 2 110Ch Channel Name Category Name 3 115Ch Channel Name Category Name 4 120Ch Channel Name To list all the channels, touch [All Channels]. Touch the info change key above the list
([Channel]/[Artist]/[Song Title]/[Info]) to change the list 2 Select a preset number to store into. SiriusXM P1 P2 P3 P4 P5
(Hold) The channel selected in step 1 is stored into the preset number [P1] to [P5] you have selected. 2022/07/25 9:44 2022/07/25 9:44 SiriusXM Satellite Radio SiriusXM Satellite Radio Selecting a preset channel Replaying content You can pause, rewind and replay the contents of the currently tuned channel. The SiriusXM Connect Vehicle Tuner continually buffers up to 60 minutes of audio. If you change to another channel during replay, the buffered contents will be lost. The time code is updated every second. 1 Display the operation keys for replay. On the source control screen:
2 Perform the replay operations. SiriusXM 1 Select the band, and then display the preset channel window. On the source control screen:
2 Select a preset channel. SiriusXM P1 100Ch P2 105Ch P3 110Ch P4 115Ch P5 120Ch Channel Name Channel Name Channel Name Channel Name Channel Name To show the details of the item, touch [< ]. You can also select a preset channel by touching
[P1] [P5]. To hide the window: Touch [ > ]. You can also select the preset channels by touching
[CHJ]/[CHK] (page 25).
[IW]
[S]/[T]
Starts/pauses playback. Skips the current track. Touching [S] within 2 seconds of the beginning of the current track returns to the previous track. Touching [S] after 2 seconds or more of the current track returns to the beginning of the track.
(Hold) Reverses/forwards search.
[Live]
Returns to the live (current broadcast) position. SiriusXM Satellite Radio features SmartFavorites
(Available for SXV200 or later) User stored channels (P1 to P5) are recognized as SmartFavorites channels. SiriusXM Connect Vehicle Tuner automatically buffers their broadcast content. When you select a SmartFavorites channel, you can rewind and replay up to 30 minutes of any of the missed news, talk, sports or music content. While SmartFavorites channel is tuned in, the album artwork of the playback song is displayed on the screen if any. If not available, station logo, channel logo, etc. will be displayed. If you change to another band, the buffered content is cleared. 00_KW_M785BW_K.indb 27 00_KW_M785BW_K.indb 27 ENGLISH 27 2022/07/25 9:44 2022/07/25 9:44 SiriusXM Satellite Radio SiriusXM Satellite Radio TuneStart When you select a SmartFavorites channel, you can listen to the current song from the beginning. 1 Display the <SiriusXM Mode> screen. On the source control screen:
2 Activate TuneStart. On the <SiriusXM Mode> screen, touch as follows:
<TuneStart> : [ON]
To deactivate TuneStart: Touch [OFF] in step 2. TuneScan You can get a short preview of the songs you have missed on each of your SmartFavorites music channels and the currently tuned music channel. Activate TuneScan to start scanning the first 6 seconds of the recorded music contents. Start TuneScan. On the source control screen:
The unit starts scanning. The I icon is displayed on the screen when TuneScan is activated. 28 ENGLISH 00_KW_M785BW_K.indb 28 00_KW_M785BW_K.indb 28 To select the previous/next music content, touch
[S] or [T]. To end scanning and continue listening to the current music content, touch [SCAN]. To exit scanning, touch and hold [SCAN]. For teams 1 Display the <SiriusXM Mode> screen. On the source control screen:
2 Display the <Alert Team Select> screen. On the <SiriusXM Mode> screen, touch as follows:
<Alert Team Select> : [Enter]
3 Select the league (1) and the team (2), then register into the content alert (3). Alert Team Select League1 League2 League3 League4 League5 Team1 Team2 Team3 Team4 Team5 To show the details of the item, touch [< ]. Content Alert The unit informs you when receiving the content you are interested in, such as music, information about a sports team, weather and traffic information. For list screen operations, see also page 13. Registering items for Contents Alert You can register your favorite artists, songs or teams. Up to 50 contents can be registered. For artists/songs While listening to your favorite artist/song:
On the source control screen:
(Hold) Touching the operation keys performs the following actions:
(Hold) Registers the artist of the current song.
(Hold) Registers the current song. 2022/07/25 9:44 2022/07/25 9:44 SiriusXM Satellite Radio SiriusXM Satellite Radio Selecting items for Content Alert You can select items (artists/songs/teams) on the list, so that this unit informs you once the selected item starts being broadcast. For artists/songs/teams 1 Display the <SiriusXM Mode> screen. On the source control screen:
To delete the registered items: Touch and hold the item you want to delete in step 3. The [
selected item. Touch the [
] icon and a check mark appear beside the
] icon to delete. To delete all registered contents: Touch and hold
] for <Content Alerts Contents Set> in
[All Clear step 2. For traffic and weather information 1 Display the <SiriusXM Mode> screen. On the source control screen:
2 Display the <Content Alerts Contents Set>
screen. On the <SiriusXM Mode> screen, touch as follows:
<Content Alerts Contents Set> : [SET]
3 Select the category (1), then the item (2). Content Alerts Contents Set Artist Title Team 000Ch Ch Name 000Ch Ch Name 000Ch Ch Name 000Ch Ch Name 000Ch Ch Name 2 Select the city you desire traffic and weather information for. SiriusXM Mode Content Alerts ON OFF Content Alerts Contents Set SET All Clear Alert Team Select Enter Traffic Weather Jump City Select Los Angeles SiriusXM Reset Reset A check mark appears beside the selected item. To show the details of the item, touch [< ]. When traffic and weather starts being broadcast, this unit automatically switches to the channel broadcasting the information. Activating Content Alert For artists/songs/teams 1 Display the <SiriusXM Mode> screen. On the source control screen:
2 Activate Content Alert. On the <SiriusXM Mode> screen, touch as follows:
<Content Alerts> : [ON]
To deactivate Content Alert: Touch [OFF] in step 2. For traffic and weather information Make sure <Content Alerts> is set to [ON]. On the source control screen:
To deactivate the Content Alert: Touch [
] again. 00_KW_M785BW_K.indb 29 00_KW_M785BW_K.indb 29 ENGLISH 29 2022/07/25 9:44 2022/07/25 9:44 SiriusXM Satellite Radio SiriusXM Satellite Radio Switching to your favorite content For artists/songs/teams When the contents of artist/song/team registered for Content Alert is being broadcast, an alert appears on the screen. Touch [Jump], and then select the item to jump to on the <Content Alerts> screen. Content Alerts Artist 1/ Channel Name Artist 2/ Channel Name Song 1/ Channel Name Song 2/ Channel Name Team 1/ Channel Name Team 2/ Channel Name To show the details of the item, touch [< ]. For traffic and weather information When a traffic and weather information for the selected city starts being broadcast, the unit automatically switches to the channel. Setting reception restrictions You can limit access to SiriusXM channels, such as those with mature content. Changing the parental code The initial setting is 0000. Changing the code does not change the
<ParentalControl>/<Parental Lock Channel Selection> settings. 30 ENGLISH 00_KW_M785BW_K.indb 30 00_KW_M785BW_K.indb 30 1 Display the <SiriusXM Mode> screen. 4 Enter a new four-digit code, and then On the source control screen:
touch [Enter] to confirm. 2 Display the <Parental Code Check>
screen. On the <SiriusXM Mode> screen, touch as follows:
<Parental Code> : [Change]
3 Enter the four-digit code (initial: 0000)
(1), and then touch [Enter] (2) to confirm. Parental Code Check Enter Old Code
1 4 7 Clear Cancel 2 5 8 0 3 6 9 Enter 5 Repeat step 4 to confirm the new code. Activating parental control You can set the parental control feature to lock any SiriusXM channels or automatically lock all channels classified as mature by SiriusXM. 1 Display the <SiriusXM Mode> screen. On the source control screen:
2 Select the desired mode for <Parental Control>.
[OFF]
[Mature]
Deactivates parental control. Locks channels classified as mature by SiriusXM. To clear the last entry, touch [Clear]. To cancel setting the code, touch [Cancel].
[User]
Locks selected channels. To lock channels, see page 31. 3 Enter the parental code to confirm your selection. 2022/07/25 9:44 2022/07/25 9:44 SiriusXM Satellite Radio SiriusXM Satellite Radio Parental Lock channel selection This option allows you to manually select the channels to be locked by the parental control feature. You can only change the setting if
<ParentalControl> is set to [User]. 1 Display the <SiriusXM Mode> screen. On the source control screen:
2 Display the <Parental Lock Channel Selection> screen. On the <SiriusXM Mode> screen, touch as follows:
<Parental Lock Channel Selection> : [SET]
3 Enter the parental code. The <Parental Lock Channel Selection> screen appears. 4 Select a category (1), and then a channel
(2). Parental Lock Channel Selection All Channels 100Ch Channel Name Category Name 1 105Ch Channel Name Category Name 2 110Ch Channel Name Category Name 3 115Ch Channel Name Category Name 4 120Ch Channel Name 5 Repeat step 4 to set the parental lock on multiple channels. To deactivate parental lock for all locked channels:
Select [All Clear] for <Parental Lock Channel Selection> in step 2, then enter the parental code. Skipping unwanted channels If you do not want to receive some channels, you can skip them. 1 Display the <SiriusXM Mode> screen. On the source control screen:
2 Display the <Skip Channel Selection>
screen. On the <SiriusXM Mode> screen, touch as follows:
<Skip Channel Selection> : [SET]
3 Select a category (1), and then a channel
(2). Skip Channel Selection All Channels 100Ch Channel Name Category Name 1 105Ch Channel Name Category Name 2 110Ch Channel Name Category Name 3 115Ch Channel Name Category Name 4 120Ch Channel Name A check mark appears beside the selected channel. To show the details of the item, touch [< ]. To list all the channels, select [All Channels]. A check mark appears beside the selected channel. To show the details of the item, touch [< ]. To list all the channels, select [All Channels]. 4 Repeat step 3 to skip multiple channels. To clear the channel skipping for all skipped channels: Touch and hold [All Clear Channel Selection> in step 2.
] for <Skip Resetting the SiriusXM Satellite Radio settings You can reset all the SiriusXM settings you made and restore the initial settings. 1 Display the <SiriusXM Mode> screen. On the source control screen:
2 Reset the settings. On the <SiriusXM Mode> screen, touch and hold as follows:
<SiriusXM Reset> : [Reset
00_KW_M785BW_K.indb 31 00_KW_M785BW_K.indb 31 ENGLISH 31 2022/07/25 9:44 2022/07/25 9:44 Other External Components Other External Components HDMI/AV-IN devices Using the AV-IN component
Connecting external components See page 55. Using the HDMI device Preparation:
Select [HDMI] for the <Wireless SETUP> setting when using the HDMI device connected to the HDMI terminals (page 49). 1 Select [HDMI] as the source. From the Home screen (page 3), touch as follows:
Preparation:
Select [AV-IN] for the <AV Input> setting when connecting the external AV device to the AV-IN terminals (page 47). 1 Select [AV-IN] as the source. From the Home screen (page 3), touch as follows:
When selecting [Camera] for the <AV Input>
setting (page 47), you cannot select [AV-IN]. 2 Turn on the connected component and start playing the source. 2 Turn on the connected HDMI device and Video menu control start playing the source. You can display the video menu control while watching the video from the external components. Touch the upper portion of the screen. The <Menu Control> screen appears. Only for [AV-IN]: Displays the <Aspect>
setting screen. Touch [ Aspect] to select the aspect ratio.
<Full>: For 16:9 original pictures 4:3 signal 16:9 signal
<Normal>: For 4:3 original pictures 4:3 signal 16:9 signal
Displays the <Screen Adjustment>
screen (page 46). Cameras Install the cameras (separately purchased) in the appropriate position according to the instructions supplied with the cameras. Connecting a front/rear view camera See page 55. To use the rear view camera, a reverse lead (REVERSE) connection is required (page 56) . When connecting the front/rear view camera, set the <Front Camera> and <Rear Camera> settings correctly (page 46). 32 ENGLISH 00_KW_M785BW_K.indb 32 00_KW_M785BW_K.indb 32 2022/07/25 9:44 2022/07/25 9:44 Other External Components Other External Components Connecting a camera to the AV-IN terminals See page 55. When connecting the external camera to the AV-IN terminals, select [Camera] for the <AV Input>
setting (page 47). For the rear view camera: The rear view screen is displayed by shifting the gear to the reverse (R) position when <Rear Camera Interruption> is set to
[ON] (page 46). A caution message appears on the screen. To remove the caution message, touch the screen. For the front view camera: The front view screen is displayed by releasing the gear from the reverse (R) position when <Front Camera Interruption> is set to other than [OFF] (page 46). Watching camera view 1 Display the camera view. From the Home screen (page 3), touch as follows:
The camera view screen of one of the connected camera is displayed. 2 Change the camera view. Touch the upper portion of the screen shown below. Each time you touch, camera view changes among front view camera, rear view camera, and AV-IN camera. To display parking guide line
(Only for the rear view camera) Touch the area shown below, or set <Parking Guidelines> to [ON] (page 46) . To close the parking guidelines, touch the same area again. To exit the camera screen Press the
the area shown below. button on the monitor panel or touch Using an external component via ADS adapter Maestro By connecting this unit to the bus system of the vehicle using iDatalink (commercially available), this unit can access the satellite radio source provided for the vehicle and vehicle information can be displayed on this unit. Displayable screens, key names, and screen names vary depending on the type of the connected iDatalink and the model of the vehicle. For details, visit <www.idatalink.com/>. Connecting an ADS adapter See page 55. Using Maestro 1 Display the <Maestro> menu screen. From the Home screen (page 3), touch as follows:
When the gear is released from the reverse (R) position, the screen also return to the previous playback source screen. 00_KW_M785BW_K.indb 33 00_KW_M785BW_K.indb 33 ENGLISH 33 2022/07/25 9:44 2022/07/25 9:44 Other External Components Other External Components Bluetooth Device Bluetooth Device
[Satellite Radio]
[Media Player]
[TEL]
[BT Streaming]
[Gauges]
[Climate]
[Parking Assist]
Displays the control screen of the satellite radio source provided for the vehicle. Displays the control screen of the media player source provided for the vehicle. Displays the control screen of the Bluetooth hands-free function provided for the vehicle. Displays the control screen of the Bluetooth streaming function provided for the vehicle. Displays the information about the instruments such as a speedometer. Displays the information about the air conditioner of the vehicle. Displays the information about the Parking Distance Sensor of the vehicle.
[Vehicle Info] Displays the information about the tire pressures of the vehicle.
[Radar Detector]
Displays the information about the Radar Detector. 2 Select the information you want or the playback source to play. When you select the playback source, turn on the connected component and start playing the source. You can use the mobile phone and portable audio player connected through Bluetooth. While using Apple CarPlay, Android Auto, or USB Mirroring, use their features for hands-free phones and audio playback. (The Bluetooth device currently connected is disconnected when an iPhone with Apple CarPlay or an Android device with Android Auto is connected.) Note While driving, do not perform complicated operations such as dialing numbers, using the phone book, etc. When you perform these operations, stop your car in a safe place. To use the Bluetooth function, you need to turn on the Bluetooth function of the device. Some Bluetooth devices may not be used with this unit depending on the Bluetooth version of the device. When a Bluetooth mobile phone is connected, the signal strength and battery level are displayed when the information is acquired from the device. If your mobile phone supports PBAP (Phone Book Access Profile), you can display the following items on the touch panel when the mobile phone is connected. Phone book Dialed calls, received calls, and missed calls (up to 100 entries in total) Two devices for Bluetooth mobile phone and one for Bluetooth audio can be connected at a time. However, when [Bluetooth Audio] is selected as the source, you can connect up to five Bluetooth audio devices and switch between these five devices. Bluetooth mobile phone When a call comes in, this unit automatically enters
[Phone], and when it ends, go back to the previous source. When a call comes in... 1 2 Device Name 1 Device Name 2 Incoming Call Name 1234XXXXXX 1 Phone device information Either hands-free phone 1 or 2 is highlighted to indicate which phone is ringing when a call comes in. Touching the operation keys performs the following actions:
Answers a call. Rejects a call. Call information is displayed if acquired. Phone operation is not available while the picture from any camera is displayed. 34 ENGLISH 00_KW_M785BW_K.indb 34 00_KW_M785BW_K.indb 34 2022/07/25 9:44 2022/07/25 9:44 Bluetooth Device Bluetooth Device During a call... 1 2 Device Name 1 Device Name 2 Talking... Name 1234XXXXXX NR LEVEL
+0 EC LEVEL DTMF MIC LEVEL
+0
+0 Making a call 1 Display the phone control screen. From the Home screen (page 3), touch as follows:
Touching the operation keys performs the following actions:
Ends a call.
Switches between hands-free mode and phone mode.
[DTMF]
Enters DTMF (Dual Tone Multi Frequency). You can send a text using the keypad. NR LEVEL
EC LEVEL
Adjusts the noise reduction level.
(5 to 5) Adjusts the echo volume level.
(5 to 5) MIC LEVEL
Adjusts the volume level of the microphone. (10 to 10) Press volume + / buttons on the monitor panel to adjust the volume of the call or earpiece. 2 Select which phone to use if two mobile phones are connected. 1 2 Device Name 1 Device Name 2 1234XXXXXX X 1 4 7
2 5 8 0/+
3 6 9
The currently active device is highlighted.
* Displays the <Connections SETUP> screen (page 10). 3 Select a method to make a call (1 5). 1 2 Device Name 1 Device Name 2 1234XXXXXX X 1 4 7
2 5 8 0/+
3 6 9
1 From the call history* (missed calls/received calls/dialed calls) 2 From the phone book*
3 From the preset list (page 36) 4 Use direct number entry 5 Use voice dialing
* Applicable only for mobile phone compatible with PBAP (Phone Book Access Profile). 4 Select a contact (1), then make a call (2). When item 1, 2 or 3 is selected in step 3:
1 2 Device Name 1 Device Name 2 Name 1 1234XXXXXX Name 1 2345XXXXXX Name 3 3456XXXXXX Name 4 4567XXXXXX Name 5 8901XXXXXX A-Z To use alphabet search in the phone book 1 Touch [
2 Touch the first letter you want to search for on A-Z]. the keypad. To search for a number, touch [1,2,3...]. 3 Select a contact you want to call from the list. Phone book search results:
Sort order, display order or any other equivalent settings of the phone may affect and show different search results (page display). 00_KW_M785BW_K.indb 35 00_KW_M785BW_K.indb 35 ENGLISH 35 2022/07/25 9:44 2022/07/25 9:44 Bluetooth Device Bluetooth Device To display other phone numbers in the same contact You can store up to ten phone numbers per contact. 1 Touch [> ]. 2 Select a contact you want to call from the list. Presetting phone numbers You can preset up to five phone numbers. 1 Display the phone control screen. From the Home screen (page 3), touch as follows:
When item 4 is selected in step 3:
Enter the phone number (1), then make a call (2). 1 2 Device Name 1 Device Name 2 1234XXXXXX X 1 4 7
2 5 8 0/+
3 6 9
To enter +, touch and hold [0/+]. To delete the last entry, touch [ X ]. When item 5 is selected in step 3:
Say the name of the person you want to call. Available only when the connected mobile phone has a voice recognition system. If the unit cannot find the target, Please speak into the microphone appears. Touch [Start], and then say the name again. To cancel voice dialling, touch [Cancel]. 2 Select which phone to use if two mobile phones are connected. 1 2 Device Name 1 Device Name 2 1234XXXXXX X 1 4 7
2 5 8 0/+
3 6 9
The currently active device is highlighted.
* Displays the <Connections SETUP> screen (page 10). 3 Select call history or phone book (1), and then select a contact (2) to preset. 1 2 Device Name 1 Device Name 2 Name 1 1234XXXXXX Name 1 2345XXXXXX Name 3 3456XXXXXX Name 4 4567XXXXXX Name 5 8901XXXXXX A-Z 4 Select a preset number to store into. 1 2 Device Name 1 Device Name 2 1234XXXXXX 2345XXXXXX 3456XXXXXX No preset No preset
(Hold) To delete the contact in the preset number: Touch
] besides the contact on the preset list. Bluetooth mobile phone settings You can change various settings for using Bluetooth devices on the <TEL SETUP> screen. 1 Display the <TEL SETUP> screen. From the Home screen (page 3), touch as follows:
Then, on the <Settings> screen, touch as follows:
[System] <Connections SETUP> : [Enter]
<TEL SETUP> : [Enter]. On the <TEL SETUP> screen, you can change and confirm the following items. 36 ENGLISH 00_KW_M785BW_K.indb 36 00_KW_M785BW_K.indb 36 2022/07/25 9:44 2022/07/25 9:44 Bluetooth Device Bluetooth Device 2 Make the settings.
<Auto Response>
ON: The unit answers the incoming calls automatically in 5 seconds. OFF (Initial): The unit does not answer the calls automatically. Answer the calls manually.
<Auto Pairing>
ON (Initial): Bluetooth devices are automatically paired. For iPhone with Apple CarPlay and Android device with Android Auto: When the device is connected via USB, it is automatically paired regardless of this setting. OFF: Cancels (not available).
<Auto Connect>
ON (Initial): Automatically establishes a connection with the already registered Bluetooth device when the unit is turned on. OFF: Cancels.
<Bluetooth HF/Audio>
Select the speakers used for Bluetooth mobile phones and Bluetooth audio players. Front Only: Front speakers only. All (Initial): All speakers. Bluetooth audio player Select [Bluetooth Audio] as the source. From the Home screen (page 3), touch as follows:
6 Displays/hides other available operation keys Selects random playback mode.
Selects repeat playback mode by touching repeatedly. Displays <Connections SETUP>
screen (page 10). The <Bluetooth Audio> screen is displayed. 7 Operation keys
Displays the <Equalizer> screen
(page 39).
[S]/[T]
Displays the category list.
(Touch) Selects a file.
(Hold) Reverses/forwards search.
[I]
[W]
Starts playback. Pauses playback. 8 Repeat mode indicator 9 Random mode indicator
* Available only for devices compatible with AVRCP 1.3. 1 Jacket picture (artwork) is shown if any 2 Playing time/playback status 3 Tag data* (current file title/artist name/album title) Pressing [ < ] scrolls the text if not all of the text is shown. 4 Signal strength and battery level
(Appear only when the information is acquired from the device.) 5 Device name Touching the device name shows the <JVC Streaming DJ> screen (page 38). 00_KW_M785BW_K.indb 37 00_KW_M785BW_K.indb 37 ENGLISH 37 2022/07/25 9:44 2022/07/25 9:44 Bluetooth Device Bluetooth Device Selecting an audio file from the menu JVC Streaming DJ 1 Display the audio menu. On the source control screen:
You can connect up to five Bluetooth audio devices at the same time. You can easily switch between these five devices by playing music from the device. 2 Select a category (1), and then select a desired item (2). For list screen operations, see also page 13. 1 Display the device list for JVC Streaming DJ. On the source control screen:
(Device name) List of the registered devices is displayed. JVC Streaming DJ Play Device Name Bluetooth Audio 1 Bluetooth Audio 2 Bluetooth Audio 3 Bluetooth Audio 4 Bluetooth Audio 5 Bluetooth Audio Playlists Artist Album Songs Genre Bluetooth Audio Artist 1 Artist 2 Artist 3 Artist 4 Artist 5 Select an item in each layer until you reach and select the desired file. 38 ENGLISH 00_KW_M785BW_K.indb 38 00_KW_M785BW_K.indb 38 2 Select the device (1) and start playback
(2). JVC Streaming DJ Play Device Name Bluetooth Audio 1 Bluetooth Audio 2 Bluetooth Audio 3 Bluetooth Audio 4 Bluetooth Audio 5 The selected device starts playback. The meaning of the icons and their colors:
Icon Meaning Device used currently for <Bluetooth Audio>
Touch to display the <Device List>
screen (page 9). Devices ready for JVC Streaming DJ Touch to select the playback device. Touch to start playing back the selected device. When the playback starts, the background of the icon becomes blue.
* When the icon and background color is gray, the device is not available. 2022/07/25 9:44 2022/07/25 9:44 Settings Settings Audio settings 1 Display the <Audio> screen. From the Home screen (page 3), touch as follows:
Then, on the <Settings> screen, touch as follows:
[Audio] (1) [Enter] for the item you adjust (2). Settings Audio Equalizer Display Sound Effect Input Fader / Balance System Speaker / Xover Key Time Alignment Enter Enter Enter Enter Enter 2 Adjust the item. The <Audio> settings are not adjustable;
When the AV source is turned off. When the Bluetooth phone is used (making or receiving a call, during a call, or while voice dialling). When Apple CarPlay or Android Auto is used for phone calling.
<Equalizer>
The following adjustments are memorized for each source until you adjust the sound again. Selecting a preset sound mode Select a preset sound mode on the <Equalizer>
screen (1). Pop/Hip Hop/R&B/Jazz/Classical/Hard Rock/
Flat (Initial)/Bass Boost/User1/User2/User3/User4 Equalizer SRC Name Preset Flat
[dB]
+9
+7
+5
+3 0
-3
-5
-7
-9 62.5 100 160 250 400 630 1k 1.6k 2.5k 4k 6.3k 10k 16k [Hz]
Bass EXT ON OFF SW Level 0 EQ INIT ALL SRC
<SW Level>
Adjusts the subwoofer level (2). Not adjustable when <None> is selected for subwoofer on the <Speaker Select> screen
(page 41). 50 to +10 (Initial: 0) To apply the adjusted equalizer to all playback sources, touch [ALL SRC], and then touch [OK] to confirm. Store your own sound adjustments 1 Select one of the User mode (User1 User4) to store your adjustment into. 2 Select a band (1), adjust the level (2), and then adjust the sound (3). Equalizer SRC Name Preset User1
[dB]
+9
+7
+5
+3 0
-3
-5
-7
-9 62.5 100 160 250 400 630 1k 1.6k 2.5k 4k 6.3k 10k 16k [Hz]
Bass EXT ON OFF SW Level 0 EQ INIT ALL SRC Repeat 1 and 2 to adjust the level of other bands. Finally adjust the following items.
<Bass EXT>
Activates/deactivates bass. ON/OFF (Initial) To clear the adjustment, touch [EQ INIT]. Once the adjustment screen is closed, your adjustment is memorized. 00_KW_M785BW_K.indb 39 00_KW_M785BW_K.indb 39 ENGLISH 39 2022/07/25 9:44 2022/07/25 9:44 Settings Settings
<Sound Effect>
Adjust the sound effect.
<Loudness>
Adjusts loudness. OFF (Initial)/Low/High
<Bass Boost>
Selects the bass boost level. OFF (Initial)/Level 1/Level 2/Level 3
<Volume Link EQ>
Reduces the driving noise by raising the bandwidth. OFF (Initial)/ON
<Space Enhancement>
Virtually enhances the sound space using the Digital Signal Processor (DSP) system (except for Tuner). Select the enhance level. OFF (Initial)/Small/Medium/Large
<Digital Track Expander>
Compensates the sound lost while audio compression process (except for analog signals). OFF/ON (Initial)
<Sound Response>
Virtually makes the sound more realistic using the Digital Signal Processor (DSP) system. Select the sound level. OFF (Initial)/Level 1/Level 2/Level 3 40 ENGLISH 00_KW_M785BW_K.indb 40 00_KW_M785BW_K.indb 40
<Sound Lift>
Moves the center of the sound to the lower or higher point. Select the height. OFF (Initial)/Low/Middle/High
<Fader/Balance>
Touch [J]/[K]/[H]/[I] or drag the mark to adjust.
<Fader>
When <X'over Network> is set to [2 way], you can adjust the front and rear speaker output balance. F15 to R15 (Initial: 0)
<Balance>
Adjusts the left and right speaker output balance. L15 to R15 (Initial: 0) To clear the adjustment: Touch [Center].
<Speaker/Xover>
Preparation:
Before making the adjustment for <Speaker/X'over>, select the appropriate crossover network mode according to the speaker system (2-way speaker system or 3-way speaker system). 1 Turn off the AV source. From the Home screen (page 3), touch as follows:
2 Display the <Xover Network> screen. Press the Volume button on the monitor panel and touch the upper right portion on the touch panel at the same time:
3 Select the crossover network mode.
[2 way]
[3 way]
Select this when 2-way system speakers are used (front/rear). Select this when 3-way system speakers are used (tweeter/mid range/subwoofer). A confirmation message appears. Touch [Yes]. 2022/07/25 9:44 2022/07/25 9:44 Settings Settings Now, you can adjust the <Speaker/X'over>
settings. 1 Display the <Settings> <Audio>
<Speaker/X'over> screens (page39). 2 Select a car type (1), select the location of the speakers (2)*, and then display the
<Speaker Select> screen (3). Car Setting OFF OFF Front Lower Door Area 3 Select the speaker type (1), select the size of the selected speaker (2), and then display the <Xover> screen (3). Speaker Select 6 1/2 inch
<Gain>/<TW Gain>
Adjusts the output volume of respective speaker.
<HPF FREQ>/<LPF FREQ>
Adjusts the crossover frequency for respective speaker.
<Slope>
Adjusts the crossover slope for respective speaker.
<Phase>
Select the phase for the speaker. If a speaker is not connected, select [None]. When setting the front speakers, select the speaker size for <Tweeter>.
<Time Alignment>
This setting improves the sound field for the seats you select.
* <Speaker Location> is available only when <Xover Network> is set to [2 way].
<Speaker Location> for rear speakers is only available when the rear speakers are selected for <Speaker Select>. 4 Adjust the crossover frequency of the selected speaker. Adjustable items vary depending on the selected speaker type/speaker size/crossover settings.
<Position>
You can select either <Listening Position> or <Front Focus> on the screen. You cannot use both setting at the same time. X'over Front TW Gain Gain HPF FREQ
[dB]
0dB 0dB 30Hz Slope
-24dB/Oct
[Hz]
Eg. when adjusting <X'over> for front speakers 00_KW_M785BW_K.indb 41 00_KW_M785BW_K.indb 41 ENGLISH 41 2022/07/25 9:44 2022/07/25 9:44 Settings Settings
<Listening Position>
This setting is used for both 2-way speaker system and 3-way speaker system. 1 Specify your favorite listening position. 1 Touch [Listening Position]. 2 Select the listening position [All] (Initial),
[FrontL], [Front R] or [Front All]*. 3 Touch [Adjust]. Position Listening Position Front Focus Front L Front All Front R All Adjust
* [Front All] is selectable only when <X'over Network> is set to [2 way]. 2 Touch [Distance] (1), and then enter the distance from your listening position to each speaker (2). 3.48 ft 0.00 ms 3.48 ft 0.00 ms 3.48 ft 0.00 ms 3.48 ft 0.00 ms 3.48 ft 0.00 ms 42 ENGLISH 00_KW_M785BW_K.indb 42 00_KW_M785BW_K.indb 42 3 Touch [Gain] (1), and then adjust the sound level of each speaker (2). Time Alignment Tweeter 0.0 dB Front L 0 dB Rear L 0 dB Subwoofer 0 dB Front R 0 dB Rear R 0 dB To initialize the setting value: Touch [Initialize]. Determining the delay time adjustment If you specify the distance from the center of your listening position to every speaker, the delay time is automatically computed and set. E.g. When [Front All] is selected as the listening position
<Front Focus>
When you select 2-way speaker system, you can use this setting, enabling you to focus the imaginary sound localization for the seat you select. 1 Select the listening position. 1 Touch [Front Focus]. 2 Select from [FrontL], [Front R], [Front All
(Priority L)], [Front All (Priority R)], [All
(Priority L)], or [All (Priority R)].
"Priority" means to which seats (left or right) the sound localization tends to be shifted. 3 Touch [Adjust]. Position Listening Position Front Focus Front L Front All Priority L All Priority L Front R Front All Priority R All Priority R Adjust
+3.5 ft 1.4 ft 2.45 ft 4.9 ft
+2.45 ft
+0 ft 2022/07/25 9:44 2022/07/25 9:44 Settings Settings 2 Touch [Distance] (1), and then adjust the following parameters (2). 3 Touch [Gain] (1), and then adjust the sound level of each speaker (2). Front Focus Adjust Distance Gain Front Focus Adjust 0.94ms 0.94ms 0.94ms 0.94ms 0.94ms Sound Image LR(Front) Sound Image LR(Rear) Size of the Virtual Sound Field Subwoofer Delay Initialize Tweeter 0.0 dB Front L 0 dB Rear L 0 dB Subwoofer 0 dB Front R 0 dB Rear R 0 dB To initialize the setting value: Touch [Initialize].
<Volume Offset>
Adjust and store the auto-adjustment volume level for each source. The volume level will automatically increase or decrease when you change the source. 5 to +5 (Initial: 0)
[Sound Image LR
(Front)]
[Sound Image LR
(Rear)]
[Size of the Virtual Sound Field]
Locates the sound image in front of the front seats, and adjust the balance. You can mute the sounds of the rear speakers and subwoofer. Locates the sound image in front of the rear seats, and adjust the balance. Adjusts the virtual sound field to the desired field size. If the sound image moves out of the front position, adjust
[Sound Image LR (Front)]/
[Sound Image LR (Rear)].
[Subwoofer Delay]
Adjusts the delay time of subwoofer sound. To close and finish the parameter setting, touch
[Close]. Display settings 1 Display the <Display> screen. From the Home screen (page 3), touch as follows::
Then, on the <Settings> screen, touch as follows:
[Display] (1) [Enter] for the item you adjust or the appropriate setting for the item (2). Settings Audio Dimmer Display User Customize Input OSD Clock System Demonstration Key Scroll Auto Enter ON ON OFF OFF ON Once OFF 2 Adjust the item if more steps are required. See the respective explanation that follows.
<Dimmer>
Auto (Initial): Dims the screen and button illumination when you turn on the headlights. Connection to the car light control switch is required (page 56). ON: Activates dimmer. OFF: Deactivates dimmer. 00_KW_M785BW_K.indb 43 00_KW_M785BW_K.indb 43 ENGLISH 43 2022/07/25 9:44 2022/07/25 9:44 Settings Settings
<User Customize>
You can change the following items. Display background by using your desired still image 2 Change the background color Display the background color selection screen (1), then select the background color (2). file (JPEG/BMP/PNG) Display background color Illumination color of the buttons on the monitor panel Home screen display pattern 1 Change the background design Display the background design selection screen (1), select the dimmer setting (2) ([
(3).
]: dimmer off), then select the background design
]: dimmer on or User You can also adjust the color yourself. Touch
[Adjust] to display the color adjustment screen, then adjust the color. The adjustment is saved in [User]. When one of these is selected, you can change the background color. To store your own image in to <User>, see page 45. 44 ENGLISH 00_KW_M785BW_K.indb 44 00_KW_M785BW_K.indb 44 3 Change the illumination color of the buttons Display the illumination color selection screen (1), select the dimmer setting (2) ([
]: dimmer on or
]: dimmer off), then select the illumination color
(3). By selecting [a] (initially selected), you can change the illumination color gradually. By selecting [b], you can adjust the color yourself. Touch [Edit] to display the color adjustment screen, select the dimmer setting (1) ([
dimmer on or [
color (2).
]: dimmer off), then adjust the The adjustment is saved in [b] (User area). 2022/07/25 9:44 2022/07/25 9:44 Settings Settings 4 Change the Home screen display pattern Display the Home screen display pattern selection screen (1), then select the Home screen display pattern (2). Apple CarPlay Where you are now in this <
Apple CarPlay Where you are now in this <
NApple CarPlay Where you are now in this <
Sat. Jan. 01 2022 a Large clock b Artwork and small clock c Artwork and no clock To store your own scene for the background image (for "1 Change the background design") When using an image file, make sure that the resolution is 800 x 480 pixels. You cannot capture copyrighted content and images. The color of the captured image may look different from that of the actual scene. 1 While playing Slide Show, display the
<User Customize> screen. 1 Press the
button on the monitor panel.
<Demonstration>
ON (Initial): Activates the display demonstration. OFF: Deactivates the display demonstration. The Home screen is displayed. 2 Touch [
]. The <Settings> screen is displayed. 3 Then, on the <Settings> screen, ,touch as follows:
[Display] <User Customize>: [Enter]
2 Display the background design selection screen (1 on page 44), then touch
The current still picture is displayed on the screen. Capture].
Moves to the following still picture. 3 Touch [
Capture] to capture the image. A confirmation message appears. Touch [Yes] to store the captured image into [User]. (The existing image is replaced with the new one.) To return to the previous screen, touch [No]. To cancel the capture, touch [Cancel].
<OSD Clock>
ON (Initial): Displays the clock while the screen is off, or while a video source is playing. OFF: Cancels.
<Scroll>
ON: Scrolls the displayed information repeatedly. Once (Initial): Scrolls the displayed information once. OFF: Cancels. Touching [ < ] scrolls the text regardless of this setting.
<Home Customize>
Changes the playback sources to display on the Home screen (page 3). 1 Select the source to replace (1), and then select a new source (2) to display on the Home screen. Home Customize 2 Repeat step 1 to replace the other playback sources. 00_KW_M785BW_K.indb 45 00_KW_M785BW_K.indb 45 ENGLISH 45 2022/07/25 9:44 2022/07/25 9:44 Settings Settings
<Screen Adjustment>
Adjust the screen. Select [DIM ON] (dimmer on) or [DIM OFF] (dimmer off), then change the following settings:
Input settings 1 Display the <Input> screen. From the Home screen (page 3), touch as follows::
<Contrast>
Adjusts the contrast. 10 to +10 (Initial: 0 for both dimmer on and off)
<Bright>
Adjusts brightness. 15 to +15 (Initial: 0 for dimmer on, and +15 for dimmer off)
<Color>
Adjusts the color. 10 to +10 (Initial: 0 for both dimmer on and off)
<Tint>
Adjusts the tint. 10 to +10 (Initial: 0 for both dimmer on and off)
<Viewing Angle>
Select the viewing angle in relation to the monitor to make the image on the screen easier to see. Under 0 (Initial)/5/10/15/20
<Front Camera Interruption>
When you shift the gear from the reverse position (R) to another position, the view screen changes to the front view screen automatically and remains for the preset period of time. Selectable when <Front Camera> and <Rear Camera Interruption> are set to [ON]. 5 Sec/10 Sec/15 Sec/20 Sec. OFF (Initial): Not used.
<Rear Camera>
Configure the rear view camera settings.
<Rear Camera Interruption>
ON (Initial): Displays the picture from the rear view camera when you shift the gear to the reverse (R) position. A caution message appears on the screen. To remove the caution message, touch the screen. OFF: Select this when no rear view camera is Then, on the <Settings> screen, touch as follows:
[Input] (1) [Enter] for the item you adjust or the appropriate setting for the item (2). Settings Audio Front Camera Display Rear Camera Input Parking Assist Enter Enter Enter System AV Input AV-IN Camera Key 2 Adjust the item if more steps are required. See the respective explanation that follows. connected.
<Front Camera>
Configure the front view camera settings.
<Front Camera>
ON: Select this when the front view camera is connected. OFF (Initial): Select this when no front view camera is connected.
<Parking Guidelines>
ON (Initial): Displays the parking guidelines. OFF: Hides the parking guidelines. 46 ENGLISH 00_KW_M785BW_K.indb 46 00_KW_M785BW_K.indb 46 2022/07/25 9:44 2022/07/25 9:44 Settings Settings
<Guidelines Setup>
Adjust the parking guidelines according to the size of the car, parking space and so on. When adjusting the parking guidelines, make sure to use the parking brake to prevent the car from moving. mark (1), and then adjust the position of Select the the selected mark (2). Initialize Make sure that A and B are horizontally parallel, and that C and D are the same length. Touch and hold [Initialize
] for 2 seconds to set all the marks to the initial default position.
<Reverse with ATT>
ON (Initial): The sound is attenuated while the gear is shifted to the reverse (R) position. OFF: Not used.
<Parking Assist>
Configure settings for using the ADS adapter.
<Parking Assist Display>
When an ADS adapter is connected, you can display information about obstacles around the car. ON: Always displays information. Dyn. (Initial): Displays information when the sensor detects obstacles. OFF: Cancels.
<Parking Assist Position>
Select where information about obstacles is displayed on the screen. Left/Right (Initial)
<AV Input>
Select the usage of the AV-IN input terminal
(adjustable only when the AV source is turned off). AV-IN (Initial): Select this when an external AV device is connected. To watch the connected device, select [AV-IN] on the source/option selection screen. Camera: Select this to watch the view from the connected camera. To watch the camera view, select [Camera] on the source/option selection screen. System settings 1 Display the <System> screen. From the Home screen (page 3), touch as follows::
Then, on the <Settings> screen, touch as follows:
[System] (1) [Enter] for the item you adjust or the appropriate setting for the item (2). Settings Audio Language English Display Clock Input Time Format System Time Zone Key Clock Adjust Enter Enter Enter Enter 2 Adjust the item if more steps are required. See the respective explanation that follows.
<Language>
Select the text language used for on-screen information. For details, see page 4. Please Ignition Off appears when the setting is changed. Turn the ignition switch off then on to enable the change.
<Clock>
Set the date and clock adjustment method. For details, see page 5. 00_KW_M785BW_K.indb 47 00_KW_M785BW_K.indb 47 ENGLISH 47 2022/07/25 9:44 2022/07/25 9:44 Settings Settings
<Time Format>
Select the time display formateither [12-Hour]
(Initial) or [24-Hour].
<Time Zone>
Select the time zone for your residential area. For details, see page 5.
<Clock Adjust>
Adjust the date and clock manually. For details, see page 5.
<Daylight Saving Time>
(Not used when the clock is set manually) Activate this by selecting the additional time for Daylight Saving Time (if available in your residential area). For details, see page 5.
<Connections SETUP>
Specify or confirm the connected devices information.
<Device List>
Shows the list of the connected (registered) devices. For details, see page 9.
<PIN Code>
Shows the current PIN code for this unit. This setting is available only when iPhone with Apple CarPlay is not connected.
<Device Name>
Shows the device name of this unit KW-M785BW.
<Bluetooth Device Address>
Shows the Bluetooth device address of this unit.
<Initialize>
Touch and hold [Enter] to reset all settings you have made for using Bluetooth mobile phones and Bluetooth audio players.
<TEL SETUP>
Configure settings for using Bluetooth mobile phones. For details, see page 36. This setting is available only when iPhone with Apple CarPlay is not connected.
<Wi-Fi Setup>
Shows the device name, device address and password of this unit.
<Device Audio Control>
Adjust the device sounds. For details, see page 11.
<Driving Position>
Set your drivers seat position of your car [LEFT]
(initial) or [RIGHT]. This setting changes the sidebar/button position of Apple CarPlay/Android Auto screens accordingly with the driver seat position. This setting is available only when iPhone with Apple CarPlay and Android device with Android Auto are not connected.
<Android Mode Select>
Select your Android usage either [Android Auto]
(initial) or [Mirroring for Android].) This setting is available only when AV source is turned off with no device connected via USB.
<Reset Android Auto Wireless Connection>
Reset the password of Android Auto wireless connection. For details, see page 11.
<Beep>
This setting is available only when 2-way speaker system is selected (page 40). ON (Initial): Activates the key-touch tone. OFF: Deactivates the key-touch tone.
<SETUP Memory>
Memorize, recall, or clear the settings you have made. The memorized settings are kept even when the unit is reset. Touch [Yes] to display the setting screen, then select an operation:
Recall: Recalls the memorized settings. Memory: Memorizes the current settings. Clear: Clears the currently memorized settings and return to the factory (initial) settings. Cancel: Cancels. A confirmation message appears. Touch [Yes]. 48 ENGLISH 00_KW_M785BW_K.indb 48 00_KW_M785BW_K.indb 48 2022/07/25 9:44 2022/07/25 9:44 Settings Settings
<Wireless SETUP>
You can change this setting only when the AV source is turned off without Apple CarPlay/Android Auto connected. HDMI: Select this to use the connected HDMI device.
<System Information>
Update the system by connecting a USB device containing an update file. To obtain the update file, visit
<https://www.jvc.net/cs/car/>.
(Wi-Fi is not available,) Wi-Fi (initial) : Select this to use the Wi-Fi function. Connect a USB device with the update file to the unit. System Information Application Version System Version GNSS Version Vxxx Vxxx Vxxx Update Update Update
<Open Source Licenses>
Shows the Open Source Licenses.
<Key Customize>
You can select four items to display on the pop-up function menu (page 13). 1 Select the item you want to replace. Key Customize FNC Key1 Key2 Key3 Key4 Settings Background Screen Adjustment Camera
<Maestro Setup>
Get information, and change the settings for using the ADS adapter.
<Initialize>
Initialize all settings you have made. Touch and hold
[Enter] to initialize the settings. After initializing the settings, adjust the settings on the <Initial Settings> screen.
<Serial Number>
Displays the serial number. Update starts. It may take a while. If the update has been completed successfully, Update Completed. Please Ignition OFF appears.
<Application Version>
Updates the system application.
<System Version>
Updates the system.
<GNSS Version>
Updates the Global Navigation Satellite firmware. Do not disconnect the USB device while updating. If the update has failed, turn the ignition switch off then on, and retry the update. 2 Select an item (1) you want to display, and then touch [ ] (2) to set. Key Customize FNC Key1 Key2 Key1 Customize Key3 Settings Key4 Settings Background Equalizer Screen Adjustment Sound Effect Camera Fader / Balance Xover 3 Repeat steps 1 and 2 to replace the other items. 00_KW_M785BW_K.indb 49 00_KW_M785BW_K.indb 49 ENGLISH 49 2022/07/25 9:44 2022/07/25 9:44 Remote Controller Remote Controller To use the remote controller, purchase optional remote controller, RM-RK258. When using the remote controller, refer also to the instruction manual supplied with the remote controller. Remote sensor*
Preparation Removing the battery sheet Pull the battery sheet out from the remote controller to activate the battery. CALIFORNIA, USA ONLY This product contains a CR Coin Cell Lithium Battery which contains Perchlorate Material special handling may apply. See <www.dtsc.ca.gov/
hazardouswaste/perchlorate>. WARNINGS Do not ingest the battery, Chemical Burn Hazard. The remote controller supplied with this product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
* DO NOT expose the remote sensor to bright light (direct sunlight or artificial lighting). Changing the battery of the remote controller CR2025 (+side) Use a commercially available button battery
(CR2025). Insert the battery with the + and poles aligned properly. If the effectiveness of the remote controller decreases, replace the battery. 50 ENGLISH 00_KW_M785BW_K.indb 50 00_KW_M785BW_K.indb 50 2022/07/25 9:44 2022/07/25 9:44 Remote Controller Remote Controller CAUTION Do not leave the remote controller in hot places such as on the dashboard. Risk of the fire of explosion if the battery is replaced by an incorrect type. Ensure to replace only with the same type. Risk of fire, explosion or the leakage of flammable liquid or gas if the battery is left in an extremely high temperature surrounding environment and/
or subjected extremely low air pressure. The battery pack or batteries shall not be exposed to excessive heat such as sunshine, fire or the like. Risk of fire, explosion or the leakage of flammable liquid or gas if the battery is disposed into fire or a hot oven, recharged, shorted, mechanically crushed or cut of the battery. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.
I/W Basic operations (RM-RK258) ASPECT VOL +/VOL Adjusts the volume level. SRC ATT DISP Selects the source. Attenuates/restores the sound. Not used for this unit. FM/J/AM/K Selects the band. Selects an item/folder. For Tuner:
Searches for channels/stations automatically. (Press)*
manually. (Hold)*
For SiriusXM Satellite Radio:
Selects a channel. (Press) Selects a channel rapidly. (Hold) Selects a file. (Press) Starts/pauses playback. Changes the seek mode For Tuner: AUTO1, AUTO2, MANU. For SiriusXM: SEEK1, SEEK2. Changes the aspect ratio. To check the current aspect ratio setting, operate on the touch panel
(pages 19 and 32). Enters a number. Enters a preset station/channel. Erases the misentry. Confirms selection. 0 9 1 5 CLR ENT
* The search method differs according to the selected seek mode. While listening to the radio (Tuner and SiriusXM), you can search for a channel or station frequency directly using the number buttons. 1 Press DIRECT to enter the search mode. 2 Press a number button to select a desired item (channel or station frequency). To erase a misentry, press CLR. 3 Press ENT to confirm. Searches for channels/stations Searching for an item directly ANGLE Not used for this unit. Answers incoming calls. To exit the search mode: Press DIRECT. DIRECT. Enters direct search mode. 00_KW_M785BW_K.indb 51 00_KW_M785BW_K.indb 51 ENGLISH 51 2022/07/25 9:44 2022/07/25 9:44 Installation and Connection Installation and Connection This section is for the professional installer. For safetys sake, leave wiring and mounting to professionals. Consult the car audio dealer. WARNINGS DO NOT connect the ignition wire (red) and the battery wire (yellow) to the car chassis (ground), you may cause a short circuit, that in turn may start a fire. DO NOT cut out the fuse from the ignition wire (red) and the battery wire (yellow). The power supply must be connected to the wires via the fuse. Always connect the ignition wire (red) and the battery wire (yellow) to the power source running through the fuse box. CAUTIONS Install this unit in the console of your car. Do not touch the metal parts of this unit during and shortly after the use of the unit. Metal parts such as the heat sink and enclosure become hot. When parking at a low ceiling area, turn off the unit to store the antenna. As when the unit is installed in the car with the function of auto antenna; the radio antenna extends automatically when you turn on the unit with the antenna control wire (ANT. CONT) connected. (Page 56) Before installation Precautions on installation and connection Mounting and wiring this product requires skills and experience. For best safety, leave the mounting and wiring work to professionals. Mount the unit so that the mounting angle is 30 or less. Make sure to ground the unit to a negative 12 V DC power supply. Do not install the unit in a location exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Do not use your own screws. Use only the screws provided. If you use the wrong screws, you could damage the unit. After the unit is installed, check whether the brake lamps, blinkers, wipers, etc. on the car are working properly. Do not press hard on the panel surface when installing the unit to the car. Otherwise scratches, damage, or failure may result. If the power is not turned on (Miswiring DC Offset Error, Warning DC Offset Error is displayed), the speaker wire may have a short circuit or have touched the chassis of the car and the protection function may have been activated. In this case, the speaker wire should be checked. Keep all cables away from heat dissipating metal parts. If your cars ignition does not have an ACC position, connect the ignition wires to a power source that can be turned on and off with the ignition key. If you connect the ignition wire to a power source with a constant voltage supply, such as with battery wires, the battery may be drained. If the fuse blows, first make sure the wires are not touching to cause a short circuit, then replace the old fuse with one with the same rating. Insulate unconnected wires with vinyl tape or other similar material. To prevent a short circuit, do not remove the caps and do not let the cable out at the ends of the unconnected wires or the terminals. Secure the wires with cable clamps and wrap vinyl tape around the wires that comes into contact with metal parts to protect the wires and to prevent short circuit. Connect the speaker wires correctly to the terminals to which they correspond. The unit may be damaged or fail to work if you share the wires or ground them to any metal part in the car. When only two speakers are being connected to the system, connect both connectors either to the front output terminals or to the rear output terminals (do not mix front and rear). For example, if you connect the connector of the left speaker to a front output terminal, do not connect the connector to a rear output terminal. 52 ENGLISH 00_KW_M785BW_K.indb 52 00_KW_M785BW_K.indb 52 2022/07/25 9:44 2022/07/25 9:44 Installation and Connection Installation and Connection Parts list for installation Note: This parts list does not include all the package contents. Wiring harness ( 1) Extension wire, 2 m ( 1) Flat head screws, M5 8 mm ( 6)
[ Round head screws, M5 x 8 mm ( 6) Microphone, 3 m ( 1)
] Trim plate ( 1) Mounting sleeve ( 1)
\ Extraction keys ( 2) GPS antenna, 3.5 m ( 1) Metal plate ( 1) Installation procedure 1 Remove the key from the ignition and disconnect the battery. 2 Make the proper input and output wire connections for each unit. 3 Connect the speaker wires of the wiring harness. 4 Connect the wires of the wiring harness in the following order: ground, battery, ignition. 5 Connect the wiring harness to the unit. 6 Install the unit in your car. Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (e.g., the sound may skip). 7 Reconnect the battery. 8 Initialize the unit (page49). 9 Configure <Initial Settings> (page4). Installing the unit Installing the unit using the mounting bracket removed from the car
Car bracket*
Note: Select the appropriate screws (supplied) for the mounting bracket.
* Shape of your car brackets may differ. Installing the unit using the mounting sleeve Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. Installing the trim plate
00_KW_M785BW_K.indb 53 00_KW_M785BW_K.indb 53 ENGLISH 53 2022/07/25 9:44 2022/07/25 9:44 Installation and Connection Installation and Connection Removing the unit 3 Insert the extraction keys (\) deeply into Installing the supplied GPS antenna 1 Remove the trim plate (]) by inserting the two extraction keys (\) as illustrated. the slots on each side.
4 Lower the extraction keys (\) toward the bottom, and pull out the unit halfway while pressing towards the inside. 2 When the lower level is removed, remove from the upper two catches of the trim plate (]).
GPS antenna is installed inside of the car. It should be installed as horizontally as possible to allow easy reception of the GPS satellite signals. 1 Clean your dashboard or other surface. 2 Remove the separator of the metal plate
(). 3 Press the metal plate () down firmly on your dashboard or other mounting surface. You can bend the metal plate () to conform to a curved surface, if necessary. 4 Remove the separator of the GPS antenna
(), and stick the antenna to the metal plate (). The frame can be removed from the top side in the same manner. Be careful to avoid injury from the catch pins on the extraction key. 5 Pull the unit all the way out with your hands, being careful not to drop it. 54 ENGLISH 00_KW_M785BW_K.indb 54 00_KW_M785BW_K.indb 54 2022/07/25 9:44 2022/07/25 9:44 Installation and Connection Installation and Connection Notes on using the supplied GPS antenna () Use the supplied GPS antenna (). Using the GPS antenna other than the supplied one may cause a drop in positioning accuracy. Depending on the type of car, reception of the GPS satellite signals might not be possible with an inside installation. Please install the supplied GPS antenna () in an area away from any antennas that are used with CB radios or satellite televisions. The supplied GPS antenna () should be installed at a position that is spaced at least 30 cm (12 inch) from mobile phone or other transmitting antenna. Signals from the GPS satellite may be interfered with by these types of communication. Painting the supplied GPS antenna () with
(metallic) paint may cause a drop in performance. Connecting external components FRONT VIEW CAMERA
(USB1)5V 1.5A 1 GPS antenna input (GPS) (page 54) 2 HDMI terminal 3 Rear view camera input (R-CAM) 4 Video output (V-OUT) 5 Audio video input (AV-IN) 6 iDatalink input for connecting an ADS adapter
(commercially available) 7 Expansion port for connecting SiriusXM Connect Vehicle Tuner (EXT I/F) (commercially available) 8 Front view camera input 9 Microphone input (MIC) (page 56) p Antenna terminal q USB terminal w Output terminals*
Left output (White) Right output (Red) REAR: Rear speaker preouts FRONT: Front speaker preouts SW: Subwoofer preouts For 3-way crossover:
REAR: Tweeter preouts FRONT: Mid range speaker preouts SW: Subwoofer preouts 2 Use HDMI cable KS-U70 (optional accessory). W H D W: 11.1 mm or less H: 7.7 mm or less D: 21.5 mm or less When you connect the cable to HDMI terminal, detach the fixture. After connecting the cable, attach the fixture back using the screw. HDMI cable Fixture 5 Connect the following type of 4-pole mini plug:
1 3 24 7 1 Left audio 2 Right audio 3 Ground 4 Composite video Antenna
* When connecting an external amplifier, connect its ground wire to the chassis of the car; otherwise the unit may be damaged. SiriusXM Connect Vehicle Tuner
(Commercially available) 00_KW_M785BW_K.indb 55 00_KW_M785BW_K.indb 55 ENGLISH 55 2022/07/25 9:44 2022/07/25 9:44 Installation and Connection Installation and Connection Wiring connection 10 A fuse FRONT VIEW CAMERA Connect to the video out terminal of the front camera Purple with white stripe Light green White ] / White with black stripe [
Gray ] / Gray with black stripe [
Green ] / Green with black stripe [
Purple ] / Purple with black stripe [
Orange with white stripe Light blue with yellow stripe Blue with white stripe (12 V 350 mA) Red (Ignition wire) Yellow (Battery wire) Black (Ground wire) REVERSE PRK SW STEERING WHEEL REMOTO INPUT REMOTE CONT ANT.CONT P.CONT Connect the antenna cord to the antenna terminal USB terminal (1 m)
(USB1)5V 1.5A Connect a USB device To the cars reverse lamp harness when using the optional rear view camera Extension wire ( ) To front speakers (left) / Mid-range speakers (left) for 3-way crossover To the cars parking brake detection switch harness
(For best safety, be sure to connect the parking sensor.) To front speakers (right) / Mid-range speakers (right) for 3-way crossover To rear speakers (left) / Tweeters (left) for 3-way crossover To rear speakers (right) / Tweeters (right) for 3-way crossover To the car light control switch To the steering wheel remote control adapter (not supplied) To the power control terminal when using the optional power amplifier (Or) To the control terminal of the motor antenna or to the power terminal for the booster amplifier of film-type antenna Ignition key switch To the car chassis Car fuse Car battery 56 ENGLISH 00_KW_M785BW_K.indb 56 00_KW_M785BW_K.indb 56 2022/07/25 9:44 2022/07/25 9:44 References References Maintenance Cleaning the unit Do not use any solvent (for example, thinner, benzine, etc.), detergent, or insecticide. This may damage the monitor or the unit. Gently wipe the panel with a soft, dry cloth. More information About USB playback Important Make sure all important data has been backed up to avoid losing the data. We bear no responsibility for any loss of data stored in the devices while using this unit. Notes on using a USB device Avoid using the USB device if it might affect driving safety. When connecting with a USB cable, use a USB 2.0 cable. Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case, disconnect the USB device, and turn off then on this unit. Do not pull out and connect the USB device repeatedly while Reading is shown on the screen. Operation and power supply may not work as intended for some USB devices. Do not leave a USB device in the car, or expose to direct sunlight or high temperatures to prevent deformation or damage to the device. 00_KW_M785BW_K.indb 57 00_KW_M785BW_K.indb 57 Playable files This unit can play back the following files with following codec and extension code:
Audio files: MP3 (.mp3), WMA (.wma), WAV (.wav), AAC (.m4a), FLAC (.flac) Picture files: JPEG (.jpg, .jpeg)/PNG (.png)/BMP
(.bmp) Video files: MPEG1, 2 (.mpg, .mpeg)/MPEG4
(.mp4)/H.264 (.h264)/MWV (.mwv)/MKV (.mkv) This unit can show or display the following Tag:
MP3: ID3 Tag (version 1.0/1.1/2.2/2.3/2.4) WMA Tag WAV Tag AAC Tag FLAC Tag Jacket picture (artwork):
Picture size: 32 32 to 1 232 672 resolution Data size: less than 500 KB File type: JPEG, PNG, BMP Audio file conditions This unit can play back files that meet the conditions below:
Bit rate:
MP3: MPEG1 Audio Layer 3: 32 kbps 448 kbps This unit cannot play back the following files:
MP3 files encoded with MP3i and MP3 PRO format. MP3 files encoded with Layer 1/2. WMA files encoded with lossless, professional, and voice format. MPEG2 Audio LSF Layer: 32 kbps 384 kbps WMA files which are not based upon Windows Media Audio. WMA/AAC files copy-protected with DRM. WMA: Up to 320 kbps AAC: Max 288 kbps per channel/48 kHz Bit number:
WAV: 4 bits 32 bits FLAC: 4 bits 32 bits Sampling frequency:
MP3: MPEG1 Audio Layer 3: 32 kHz 48 kHz MPEG2 Audio LSF Layer: 16 kHz 24 kHz WMA: 8 kHz 48 kHz AAC: 8 kHz 96 kHz WAV: 44.1 kHz 192 kHz FLAC: 8 kHz 192 kHz Files recorded in VBR (variable bit rate), and have a discrepancy in elapsed time indication. ENGLISH 57 2022/07/25 9:44 2022/07/25 9:44 References References Video file conditions Streams that conform to:
MPEG1/MPEG2:
Audio: MP1, MP2, MP3, AAC-LC, AC3, LPCM Video: MPEG1, MPEG2 MPEG4:
Audio: MP3, AAC Video: MPEG4 H.264:
Audio: MP3, AAC Video: H.264 MKV:
Audio: MP3, AC3, LPCM, AAC-LC/HE, AAC, Cook Video: H.264, MPEG-4 AVC, MPEG4, WMV WMV:
Audio: WMA Video: Windows Media Video 9 Maximum bit rate:
MPEG1: Max 4 Mbps MPEG4/H.264/WMV: Max 8 Mbps Picture size MPEG1: 176 x 144, 352 x 240 , 720 x 480 (30fps) MPEG2: 176 x 144, 352 x 288, 320 x 240, 720 x 480, 720 x 576, 1 440 x 1 080, 1 280 x 720, 1 920 x 1 080 H.264: 1 920 x1 080 (30fps) WMV: 1 280 x 720 (60fps), 1 920 x 1 080 (30fps) MPEG4: 1 920 x 1 080 (30fps) Other playable conditions:
Video file size: Less than 2 GB MPEG1/MPEG2: File format: SP@LL, SP@ML, MP@
LL, MP@ML, MP@H-14, MP@HL, HP@LL, HP@ML, HP@H-14, HP@HL Folder/file limitations This unit can recognize:
A total of 5 000 files 250 folders each for video files/photo files and a maximum of 999 files per folder The maximum number of characters is 260 characters for folder name plus file name (when the characters are 1 byte):
Unplayable USB device This unit may not play back files in a USB device properly when using a USB extension cable. USB devices equipped with special functions such as data security functions cannot be used with the unit. Do not use a USB device with nine or more partitions. Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose. This unit may not recognize a memory card inserted into a USB card reader. About Apple CarPlay The following iPhone devices can be used. Made for iPhone 6S, 6S Plus, 7, 7 Plus, 8, 8 Plus, X, XS, XS Max, XR, 11, 11 Pro, 11 Pro Max, SE (1st/2nd generation), 12, 12 mini, 12 Pro, 12 Pro Max, 13, 13 mini, 13 Pro, 13 Pro Max The GPS antenna must be connected to use Apple CarPlay wirelessly with Wi-Fi. Although the service area is expanding, Apple CarPlay service is NOT available in some markets. Please check the latest information concerning availability in your region from the below website. http://www.apple.com/ios/feature-
availability/#applecarplay-applecarplay About Android Auto Although the service area is expanding, Android Auto service is NOT available in some markets. Please check the latest information concerning availability in your region from the below website. https://support.google.com/androidauto/
58 ENGLISH 00_KW_M785BW_K.indb 58 00_KW_M785BW_K.indb 58 2022/07/25 9:44 2022/07/25 9:44 References References About USB Mirroring Depending on the connected Android device, you may need to enable virtual keyboard setting on your smartphone to display software keyboard on the screen of this unit and on your Android device. The audio may be of poor quality, interrupted or skipped, depending on several conditions such as network condition, the application and etc. If you perform pairing with another device during mirroring, mirroring (audio and/or video) will be disturbed or paused. Some Apps may not support audio sharing (no sound from the background playback source). Some operations may not work depending on the compatibility between this unit, Mirroring OA for JVC App and your Android device. Troubleshooting Troubleshooting What appears to be trouble is not always serious. Check the following points before calling a service center. For operations with external components, refer also to the instructions supplied with the adapters used for connection (as well as the instructions supplied with the external components). General No sound comes out of the speakers. Adjust the volume to the optimum level. Check the cords and connections. The unit does not work at all. Initialize the unit (page 49). The remote controller does not work. Replace the battery. No Signal/No Video Signal appears. Start playback on the external component connected to this unit. Check the cords and connections. Signal input is too weak. Miswiring DC Offset Error/Warning DC Offset Error appears. A speaker cord has shorted or it has come into contact with the car chassis. Wire or insulate the speaker cord as appropriate, turn the ignition switch off then on. Parking off appears. No playback picture is shown when the parking brake is not engaged. Bluetooth connection The Bluetooth device does not detect this unit. Turn off, then turn on the Bluetooth device Turn off, then turn on this unit. This unit does not pair with the Bluetooth device. If the device is connected via USB cable, disconnect it, and retry. Turn off, then turn on the Bluetooth device. The device is disconnected automatically or the device cannot be connected. When iPhone compatible with Apple CarPlay is connected to the USB terminal, it cannot be connected via Bluetooth. Use the phone and audio player function on the Apple CarPlay screen. When an Android device compatible with Android Auto is connected to the USB terminal, the device is connected via Bluetooth automatically, and the Bluetooth mobile phone currently connected is disconnected. 00_KW_M785BW_K.indb 59 00_KW_M785BW_K.indb 59 ENGLISH 59 2022/07/25 9:44 2022/07/25 9:44 Troubleshooting Troubleshooting The Bluetooth connection between the Bluetooth device and the unit is unstable. Delete the unused registered Bluetooth device from the unit (page 10). Connection Error appears. The device is registered but the connection has failed. Connect the registered device using the
<Device List> screen (page 10). Please Wait... appears. The unit is preparing to use the Bluetooth function. If the message does not disappear, turn off and turn on the unit, then connect the device again. Initialize Error appears. The unit has failed to initialize the Bluetooth module. Try the operation again. Wi-Fi connection iPhone for Apple CarPlay or Android device for Android Auto cannot be connected wirelessly. You can turn on or off the Wi-Fi function on the
<Wireless SETUP> settings. To use the Wi-Fi function, select [Wi-Fi] (page 49). Apps Apple CarPlay:
[Apple CarPlay] is not highlighted on the source/
option selection screen. Check the version of the connected iPhone whether it is compatible with Apple CarPlay. Check the iPhone is connected properly for Apple CarPlay. You can check the connection referring to the <Device List> screen. Sound is too loud or small while using Apple CarPlay. Adjust <Guidance/Voice Recognition Volume>,
<Phone Incoming Volume>, <Phone Calling/
Talking Volume> or <Media Volume> for
<Apple CarPlay> (page 11). The Home screen appears while using Apple CarPlay. Wi-Fi is disconnected. Android Auto:
[Android Auto] is not highlighted on the source/
option selection screen. Check whether [Android Auto] is selected in the
<Android Mode Select> (page 48). Check the version of the connected Android device whether it is compatible with Android Auto. Check the Android device is connected properly for Android Auto. You can check the connection referring to the <Device List>screen. The Home screen appears while using Android Auto. Wi-Fi is disconnected. Sound is too loud or small while using Android Auto. Adjust <Guidance/Voice Recognition Volume>,
<Phone Incoming Volume>, <Phone Calling/
Talking Volume> or <Media Volume> for
<Android Auto> (page 11). Android Auto is deactivated. When you start Apple CarPlay, Android Auto is deactivated. USB Mirroring:
[USB Mirroring] is not highlighted on the source/
option selection screen. Check whether [Mirroring for Android] is selected in the <Android Mode Select> (page 48). Check the version of the connected Android device whether it is compatible with USB Mirroring. Check the Android device is connected properly for USB Mirroring. You can check the connection referring to the <Device List> screen. Check JVC's Mirroring OA App is activated on Android device. 60 ENGLISH 00_KW_M785BW_K.indb 60 00_KW_M785BW_K.indb 60 2022/07/25 9:44 2022/07/25 9:44 Troubleshooting Troubleshooting USB Mirroring is deactivated. When you start Apple CarPlay, USB Mirroring is deactivated. No sounds from Android device come out of the speakers. Check the Android device is connected properly with Bluetooth. USB No File appears. The loaded USB does not contains any file of the selected type (audio/video/photo). Select the correct file type or replace the USB. Reading does not disappear from the screen. Turn the power off and on again. While playing a file, sound is sometimes interrupted. The files are not properly copied into the USB device. Copy the files again, and try again. Files are not played back as you have intended them to play. Playback order may differ from the one played back using other players. The source does not change to [USB] when you connect a USB device while listening to another source or USB Device Error appears when you connect a USB device. The USB port is drawing more power than the No picture appears on the screen. While driving, no video is shown. You can only listen to the sounds. Turn on the HDMI device if it is not on. Connect the HDMI device correctly. design limit. Turn the power off and unplug the USB device. Then, turn on the power and reattach the USB device. If the above does not solve the problem, turn the power off and on before replacing with another USB device. Tuner SSM automatic presetting does not work. Store stations manually (page 24). Static noise while listening to the radio. Connect the antenna firmly. Your desired station cannot be tuned in.
<Area Setting> is incorrect. Select the correct area for <Area Setting> (page 23). HDMI HDMI device connected to the HDMI terminal cannot be used. This is normal when [Wi-Fi] is selected for the
<Wireless SETUP> setting (page 49). Select [HDMI] to use the HDMI device. AV-IN No picture appears on the screen. While driving, no video is shown. You can only listen to the sounds. Select [AV-IN] for <AV Input> setting (page 47). Turn on the external component if it is not on. Connect the external component correctly. Cameras No picture appears on the screen. Connect the camera correctly. Picture from the camera connected to the AV-IN terminal is not displayed on the screen. Select [Camera] for <AV Input> setting
(page 47). SiriusXM Satellite Radio SXM No Signal appears. Make sure the antenna of the SiriusXM Connect Vehicle Tuner is mounted outside the car. Move the car to an area with a clear view of the sky. 00_KW_M785BW_K.indb 61 00_KW_M785BW_K.indb 61 ENGLISH 61 2022/07/25 9:44 2022/07/25 9:44 Troubleshooting Troubleshooting SXM Check Antenna appears. Check the antenna connection of the SiriusXM Connect Vehicle Tuner, and make sure the antenna is firmly attached to the tuner. SXM Channel Locked appears. The selected channel has been locked by the parental controls. Enter the parental lock code when you are asked. Check whether the antenna cable of the SiriusXM Connect Vehicle Tuner is bent or broken. If it is damaged, replace the whole antenna unit. SXM Check Tuner appears. Make sure the SiriusXM Connect Vehicle Tuner is connected to the unit. SXM Chan Unavailable appears.
(Appears on the screen for about 5 seconds, then returns to the previous channel):
The selected channel is no longer available. Select another channel or continue listening to the previous channel. SXM Ch Unsubscribed appears.
(Appears on the screen for about 5 seconds, then returns to the previous channel) The selected channel is not part of your current subscription plan. Call 1-866-635-2349 (USA) or 1-888-539-7474 (Canada) to subscribe. SXM Incorrect Lock Code appears. You have entered an incorrect lock code. Enter the correct parental lock code. Bluetooth hands-free phone Phone is disconnected. When iPhone for Apple CarPlay or Android Auto device is connected, the currently connected Bluetooth device is disconnected. Use Apple CarPlay or Android Auto screen for phone. Phone sound quality is poor. Echo or noise occurs. Reduce the distance between the unit and the Bluetooth mobile phone. Move the car to a place where you can get a better signal reception. Adjust the sound quality using <Microphone Level>, <Echo Cancel Level>, <Noise Reduction Level> (page 11). SXM Subscription Updated Press Return to Continue appears. Your subscription has been updated. Press the appropriate button to continue. The unit does not respond when you try to copy the phone book to the unit. You may have tried to copy the same entries (as stored) to the unit. No Data appears. No phone book data is contained in the connected Bluetooth phone. Dial Error appears. Dialing has failed. Try the operation again. Hung Up Error appears. The call has not ended yet. Park your car, and use the connected mobile phone to end the call. Pick Up Error appears. The unit has failed to receive a call. Bluetooth audio Bluetooth audio played is disconnected. When iPhone for Apple CarPlay or Android Auto device is connected, the currently connected Bluetooth device is disconnected. The sound is interrupted or skipped while using a Bluetooth audio player. Reduce the distance between the unit and the Bluetooth audio player. Disconnect the device connected for Bluetooth phone if any. Turn off, then turn on the unit.
(When the sound is not yet restored) connect the player again. The connected audio player cannot be controlled. Check whether the connected audio player supports AVRCP (Audio/Video Remote Control Profile). 62 ENGLISH 00_KW_M785BW_K.indb 62 00_KW_M785BW_K.indb 62 2022/07/25 9:44 2022/07/25 9:44 Specifications Specifications Monitor section Picture Size (W H) 6.75 inches (diagonal) wide 151.8 mm 79.7 mm
(6" 3-1/7") Display System TN LCD panel Drive System TFT active matrix system Number of Pixels 1 152 000
(800H 480V RGB) Effective Pixels 99.99%
Pixel Arrangement RGB striped arrangement Back Lighting LED MP3/WMA/AAC/WAV/FLAC Profile USB I/F section Connector Type Type-A USB Standard USB 2.0 Full Speed/High Speed File System FAT 16/32, exFAT Maximum Power Supply Current D/A Converter Audio Decoder Video Decoder Frequency Response Total Harmonic Distortion DC 5 V 1.5 A 24 bit MPEG1/MPEG2/MPEG4/
WMV/H.264/MKV 192 kHz Sampling:
20 Hz to 20 000 Hz 96 kHz Sampling:
20 Hz to 20 000 Hz 48 kHz Sampling:
20 Hz to 20 000 Hz 44.1 kHz Sampling:
20 Hz to 20 000 Hz 0.010% (1 kHz) Signal to Noise Ratio 98.5 dB Dynamic Range 89 dB Bluetooth section Technology Frequency Maximum Communication Range Bluetooth V5.0 2.402 GHz to 2.480 GHz Line of sight approx. 10 m
(32.8 ft) Audio Codec SBC/AAC Multi Profile Support Multi Profile HFP (Hands Free Profile) V1.8 SPP (Serial Port Profile) A2DP (Advanced Audio Distribution Profile) V1.3.2 AVRCP (Audio/Video Remote Control Profile) V1.6.2 PBAP (PhoneBook Access Profile) Wi-Fi section IEEE Standard 802.11 a/b/g/n/ac Frequency Range Dual Band (2.4 GHz/5 GHz) Channels Transfer rates (MAX) Auto (1-11ch) Auto (149,153,157,161ch) 11a: 54 Mbps / 11b: 11 Mbps /
11g: 54 Mbps / 11n: 150 Mbps /
11ac: 433 Mbps 00_KW_M785BW_K.indb 63 00_KW_M785BW_K.indb 63 ENGLISH 63 2022/07/25 9:44 2022/07/25 9:44 Specifications Specifications FM radio section Frequency Range
(Frequency Step) Usable Sensitivity
(S/N: 30 dB) Quieting Sensitivity
(DIN S/N: 46 dB) Frequency Response
(3.0 dB) Initial: 87.9 MHz to 107.9 MHz
(200 kHz) 7.2 dBf (0.63 V/75 ) 15.2 dBf (1.58 V/75 ) 30 Hz to 15 kHz Signal to Noise Ratio:
68 dB (MONO) Selectivity (400 kHz) > 80 dB Stereo Separation 40 dB (1 kHz) AM radio section Frequency Range
(Frequency Step) 530 kHz to 1 700 kHz (10 kHz) Usable Sensitivity 29 dB (28.2 V) Video section Color System of External Video Input External Video Input Level (RCA jack)/
(mini jack) External Audio Max. Input Level (mini jack) Video Input Level
(RCA jack) Video Output Level
(RCA jack) NTSC/PAL 1 Vp-p/75 2 V/25 k 1 Vp-p/75 1 Vp-p/75 Audio section Maximum Power
(Front & Rear) 50 W 4 Full Bandwidth Power (Front & Rear) 22 W 4 (at less than 1%
THD) Output Frequency Band 20 Hz to 88 000 Hz Preout Level:
4 V/10 k Preout Impedance 600 Speaker Impedance 4 to 8 Equalizer Band 13 Band Frequency (Hz):
62.5/100/160/250/400/630/
1k/1.6k/2.5k/4k/6.3k/10k/
16k Gain (dB):
9/8/7/6/5/4/3/2/
1/0/1/2/3/4/5/6/7/8/9 64 ENGLISH 00_KW_M785BW_K.indb 64 00_KW_M785BW_K.indb 64 2022/07/25 9:44 2022/07/25 9:44 Specifications Specifications Tweeter HPF LPF Gain (dB):
8/7/6/5/4/3/2/1/0 Frequency (Hz):
Through/30/40/50/60/70/
80/90/100/120/150/180/
220/250 Slope (dB/Oct.):
6/12/18/24 Gain (dB):
8/7/6/5/4/3/2/1/0 Frequency (Hz):
30/40/50/60/70/80/90/100/
120/150/180/220/250/
Through Slope (dB/Oct.):
6/12/18/24 Gain (dB):
8/7/6/5/4/3/2/1/0 Phase: Normal/Reverse Tweeter HPF Mid Range HPF Mid Range LPF Subwoofer LPF Frequency (Hz):
1k/1.6k/2.5k/4k/5k/6.3k/8k/
10k/12.5k Slope (dB/Oct.):
6/12 Gain (dB):
8/7/6/5/4/3/2/1/0 Phase: Normal/Reverse Frequency (Hz):
Through/30/40/50/60/70/
80/90/100/120/150/180/
220/250 Slope (dB/Oct.):
6/12 Frequency (Hz):
1k/1.6k/2.5k/4k/5k/6.3k/8k/
10k/12.5k/Through Slope (dB/Oct.):
6/12 Gain (dB):
8/7/6/5/4/3/2/1/0 Phase: Normal/Reverse Frequency (Hz):
30/40/50/60/70/80/90/100/
120/150/180/220/250/
Through Slope (dB/Oct.):
6/12 Gain (dB):
8/7/6/5/4/3/2/1/0 Phase: Normal/Reverse HDMI I/F section Connector Type Type-D Input Resolution Input Audio Type VGA
(640 x 480p @ 59.94 Hz/60 Hz) 480p
(720 x 480p @ 59.94 Hz/60 Hz) 32 kHz/44.1 kHz/48 kHz/
88.2 kHz/96 kHz/176.2 kHz/
192 kHz 16 bit/20 bit/24 bit Linear PCM General Operating Voltage 12 V DC car battery Installation Dimensions
(W H D) Weight (Main Unit) Main unit:
180 mm 100 mm 75 mm
(7-1/16" 3-15/16"
2-15/16") With sleeve:
182 mm 111 mm 74 mm
(7-3/16" 4-3/8" 2-15/16") 1.2 kg (2.7 lbs)
(including trim plate and mounting sleeve) Design and specifications are subject to change without notice. 00_KW_M785BW_K.indb 65 00_KW_M785BW_K.indb 65 ENGLISH 65 2022/07/25 9:44 2022/07/25 9:44 Trademarks and Licenses Trademarks and Licenses Windows Media is a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft. Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple product(s) identified in the badge and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance. Wi-Fi is a registered trademark of Wi-Fi Alliance. The Wi-Fi CERTIFIED Logo is a registered trademark of Wi-Fi Alliance. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by JVCKENWOOD Corporation is under license. Other trademarks and trade names are those of their respective owners. SiriusXM and all related marks and logos are trademarks of Sirius XM Radio, Inc. All rights reserved. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. Font for the this product is RT Font designed and sold by Ricoh Industrial Solutions Inc. Apple, iPhone, and Lightning are trademarks of Apple Linux is the registered trademark of Linus Torvalds in Inc., registered in the U.S. and other countries. the U.S. and other countries. Apple, Siri, Apple CarPlay and Apple CarPlay logo are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc., registered in the U.S. and other countries. IOS is a trademark or registered trademark of Cisco in the U.S. and other countries and is used under license. Google, Android, Android Auto, Google Maps and other marks are trademarks of Google LLC. To use Android Auto on your car display, youll need an Android Auto compatible vehicle or aftermarket stereo, an Android phone running Android 6.0 or higher, an active data plan, and the Android Auto app. THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL USE OF A CONSUMER OR OTHER USES IN WHICH IT DOES NOT RECEIVE REMUNERATION TO
(i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD ("AVC VIDEO") AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW.MPEGLA.COM THIS PRODUCT IS LICENSED UNDER THE MPEG-
4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR
() ENCODING VIDEO IN COMPLIANCE WITH THE MPEG-4 VISUAL STANDARD (MPEG-4 VIDEO) AND/OR () DECODING MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE MPEG-4 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION INCLUDING THAT RELATING TO PROMOTIONAL, INTERNAL AND COMMERCIAL USES AND LICENSING MAY BE OBTAINED FROM MPEG LA, LLC. SEE HTTP://
WWW.MPEGLA.COM THIS PRODUCT IS LICENSED UNDER THE VC-1 PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO
( i ) ENCODE VIDEO IN COMPLIANCE WITH THE VC-1 STANDARD (VC-1 VIDEO) AND/OR ( ii ) DECODE VC-1 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE VC-1 VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE HTTP://WWW. MPEGLA.COM 66 ENGLISH 00_KW_M785BW_K.indb 66 00_KW_M785BW_K.indb 66 2022/07/25 9:44 2022/07/25 9:44 Trademarks and Licenses Trademarks and Licenses Important Notice on Software Software License on This Product The software embedded in this product comprises a number of independent software components, each of which is copyrighted by JVCKENWOOD Corporation or by a third party. This product uses software components that are based on an End-User License Agreement (hereinafter called EULA) stipulated by JVCKENWOOD Corporation and by third parties. The EULA dictates the availability of the source codes of free-software components as a prerequisite to distributing them in executable form under the terms of the GNU General Public License or the Lesser General Public License (hereinafter called GPL/LGPL). To get information about the software components that are subject to the terms of the GPL/LGPL, please visit the following Website:
Website URL https://www3.jvckenwood.com/english/
download/gpl/
Queries concerning the contents of the source code or the like will not be accepted. Please note that software components based on a EULA that is not subject to the terms of the GPL/LGPL or those that have been developed or created by JVCKENWOOD Corporation will be excluded from the scope of source code disclosure. Because licenses to use software components distributed under the GPL/LGPL are offered to the customers for free of charge, no warranty is granted to the customers, whether explicitly or implicitly, to the extent of the applicable laws. Unless otherwise stipulated by the applicable laws or agreed upon in writing, the copyright holders or those who are entitled to modify and redistribute the software components are not held responsible for any and all damages resulting from their use or from inability to use them. For more information about the terms of use of the software components, required items of compliance and so on, please refer to the GPL/LGPL. Customers wishing themselves to use a software component that is subject to the GPL/LGPL embedded in this product are encouraged to read the terms of the corresponding license before use. Because each individual license is prescribed by a third party other than JVCKENWOOD Corporation, the original (English) of the license is presented. EULA Software License Agreement JVCKENWOOD Corporation (hereinafter called Licensor) holds either the copyright to the embedded software or the right to sublicense it. This agreement establishes the conditions under which the customer uses this Licensed Software. The customer shall agree to the terms of this license agreement before proceeding to use Licensed Software. This agreement is deemed to have taken effect when the customer (hereinafter called User) has used a product implementation of Licensed Software. The Licensed Software may contain software Licensor has been licensed to use by third parties directly or indirectly. Some third parties may have terms of use prescribed for their customers, apart from this Software License Agreement. This agreement does not apply to such software. Be sure to consult Important Notice on Software as presented separately. Article 1 (General) Licensor grants to User a non-exclusive, non-assignable right of use Licensed Software within the country where the User purchases the Product (hereinafter the
"Country") (except for the exception provided for in Paragraph 1, Article 3). Article 2 (Right of Use) 1. The rise of use granted under this agreement is the right to use Licensed Software in this product. 2. User may not duplicate, copy, modify, add to, translate or otherwise alter, or loan licensed Software and the associated literature in whole or in part. 3. Use of Licensed Software is limited to a private extent, and Licensed Software may not be distributed, licensed or sublicensed for any purposes whatsoever, including commercial use. 4. User shall use Licensed Software as per the instruction manual or instructions given in the help file and may not use or duplicate data in violations of the regulations of the Copyright Law or other governing laws by using Licensed Software in whole or in part. 00_KW_M785BW_K.indb 67 00_KW_M785BW_K.indb 67 ENGLISH 67 2022/07/25 9:44 2022/07/25 9:44 Trademarks and Licenses Trademarks and Licenses Article 3 (Terms of License) 1. In assigning this product, User may not retain the original copy of the embedded Licensed Software (including associated literature, updates and upgrades) and any duplicates and associated literature with regard to the license to use Licensed Software. User may transfer Licensed Software only to the condition of binding the assignee to abide by the terms of this Software License Agreement. 2. User may not reverse-engineer, disassemble, decompile or otherwise analyze the source code of Licensed Software. Article 4 (Rights to Licensed Software) All rights to Licensed Software and the associated literature, including copyrights, shall reside with Licensor or the original right holder who has granted the Right of Use and right to sublicense to Licensor
(hereinafter referred to as Original Right Holder), and User does not have any rights other than Right of Use granted hereunder with regard to Licensed Software and the associated literature. Article 5 (Exemption Granted to Licensor) 1. Licensor and Original Right Holder do not assume any responsibility for damages caused to User or third parties resulting from the exercise by User of the license granted hereunder, unless otherwise provided by any law to the contrary. 2. Licensor does not warrant Licensed Software to be merchantable, compatible and fit for specific purposes. Article 6 (Responsibility for Third Parties) If disputes over the infringement of third parties intellectual property rights, such as copyrights and patent rights, arise out of the use of Licensed Software by User, User shall resolve these disputes at Users own expenses while keep Licensor and Original Right Holder harmless. Article 7 (Secrecy Obligation) User shall keep confidential Licensed Software provided hereunder, information contained in the associated literature or the like and those provisions of this agreement not yet in public knowledge and may not disclose or leak these to third parties without prior written consent from Licensor. Article 8 (Cancellation of the Agreement) Licensor reserves the right to cancel this agreement forthwith and claim compensation from User for the damages caused by such cancellation when User:
(1) Breaches any of the provisions of this agreement, or
(2) Has received a petition for seizure, provisional seizure, provisional disposition or any other kind of compulsory execution. Article 9 (Destruction of Licensed Software) If this agreement is terminated under the provision of the foregoing paragraph, User shall destroy Licensed Software, along with all associated literature and its duplicates, within two (2) weeks from the date of termination. 68 ENGLISH 00_KW_M785BW_K.indb 68 00_KW_M785BW_K.indb 68 Article 10 (Copyright Protection) 1. Copyrights and all other intellectual property rights relating to Licensed Software shall reside with Licensor and Original Right Holder and in no circumstances with User. 2. User shall abide by the laws relating to copyrights and intellectual property rights in using Licensed Software. Article 11 (Export Control) 1. Licensed Software and the associated literature or the like may not be exported to places outside the Country (including transmission outside the Country over the Internet or the like). 2. User agrees that Licensed Software is subject to export controls imposed by the Country and the United States of America. 3. User agrees to comply with all the international and domestic laws that apply to this software (U.S. Export Administration Regulations and regulations established by the U.S., the Country and their governmental agencies regarding usage by end users and export destinations). Article 12 (Miscellaneous) 1. Even if this agreement is invalidated in part by law, all other provisions shall remain in effect. 2. Licensor and User shall consult each other in good faith to resolve any matters not provided for in this agreement or questions arising from the interpretation of this agreement. 3. Licensor and User agree that this agreement is governed by the law of Japan and that all dispute involving claims and obligations that may arise out of this agreement will be settled by arbitration at the Tokyo District Court as the court of first instance. 2022/07/25 9:44 2022/07/25 9:44 00_KW_M785BW_K.indb 69 00_KW_M785BW_K.indb 69 2022/07/25 9:44 2022/07/25 9:44 For updated information (the latest Instruction Manual, system updates, new functions, etc.), please visit the following website:
<https://www.jvc.net/cs/car/>
2022 JVCKENWOOD Corporation 0722DTSMDTJKEI 00_KW_M785BW_K.indb 1 00_KW_M785BW_K.indb 1 2022/07/25 9:44 2022/07/25 9:44
1 2 3 4 | 04 Short-Term Confidential Internal Photo | Internal Photos | 774.75 KiB | September 29 2022 / January 08 2023 | delayed release |
1 2 3 4 | 04 Short-Term Confidential External Photo 1 | External Photos | 309.75 KiB | September 29 2022 / January 08 2023 | delayed release |
1 2 3 4 | 04 Short-Term Confidential External Photo 2 | External Photos | 327.47 KiB | September 29 2022 / January 08 2023 | delayed release |
1 2 3 4 | 04 Short-Term Confidential External Photo 3 | External Photos | 309.49 KiB | September 29 2022 / January 08 2023 | delayed release |
1 2 3 4 | 01 FCC 2.911(d)(5) Attestation | Attestation Statements | 324.53 KiB | September 07 2023 |
Date: August 29, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 2.911 (d)(5) Attestation FCC ID: IOMJ5284 JVCKENWOOD Corporation (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. JVCKENWOOD Corporation (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment and is not an affiliate or subsidiary of an entity identified on the Covered List. Sincerely yours, Masayuki Ikeda JVCKENWOOD Corporation 2967-3,Ishikawa-machi,Hachioji-shi,Tokyo,192-8525 Japan Tel +81-42-646-5525
1 2 3 4 | 01 FCC Agent Attestation Agent | Attestation Statements | 41.11 KiB | September 07 2023 |
FCC US Agen Date: August 31, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 2.911 (d)(7) FCC US Agent Letter of Attestation FCC ID: IOMJ5284 Grantee FRN: 0017389966 To whom it may concern Contact Person: Richard J Noetzli Company Name: JVCKENWOOD USA Corporation FRN: 0034181875 Company Address: 4001 Worsham Ave, Long Beach, CA 90808 United States Email: rnoetzli@us.jvckenwood.com This letter is to confirm that we have accepted the responsibility to act as US Agent on behalf of JYCKENWOOD Corporation (the applicant) for the above referenced FCC ID. We are aware of the requirements and responsibilities of the applicants agent for service of process as outlined in the FCC section 2.911(d)(7) and Report and Order FCC 22-84 paragraph 63. Sincerely yours, Signature:
Richard J JVCKENWOOD USA __ rporation JVCKENWOOD USA Corporation 4001 Worsham Avenue Long Beach, CA 90808 JIVCKENWOOD
1 2 3 4 | 01 FCC Agent Attestation Applicant | Attestation Statements | 322.52 KiB | September 07 2023 |
Date: August 30, 2023 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 RE: CFR 47 2.911 (d)(7) Agent Designation Attestation FCC ID: IOMJ5284 Grantee FRN: 0017389966 JVCKENWOOD Corporation (the applicant) as required by section 2.911(d)(7), designates the following agent, located in the United States, for purposes of acting as the applicants agent for service of process. The applicant acknowledges that they will maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility under CFR 47 2.929(c) to inform the FCC whenever the agent information changes. U.S. Agent Information:
Contact Person: Richard J Noetzli Company Name: JVCKENWOOD USA Corporation FRN: 0034181875 Company Address: 4001 Worsham Ave, Long Beach, CA 90808 United States Email: rnoetzli@us.jvckenwood.com Sincerely yours, Signature:
Masayuki Ikeda JVCKENWOOD Corporation 2967-3,Ishikawa-machi,Hachioji-shi,Tokyo,192-8525 Japan Tel +81-42-646-5525
1 2 3 4 | 02 FCC Authorization Letter | Cover Letter(s) | 316.40 KiB | September 07 2023 |
Letter of Authorization Date: August 29, 2023 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Applicant: JVCKENWOOD Corporation FCC ID: IOMJ5284 To whom it may concern:
We, the undersigned, hereby authorize Akiko Nishimura of Consumer, Medical & Information Technologies Division, UL Japan, Inc. to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by UL Japan, Inc. on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. This authorization is valid until further written notice from the applicant. The application for the subject equipment has not been submitted to another TCB for certification. Sincerely Yours, Masayuki Ikeda JVCKENWOOD Corporation 2967-3,Ishikawa-machi,Hachioji-shi,Tokyo,192-8525 Japan Tel +81-42-646-5525
1 2 3 4 | 02 FCC Class II Permissive Change Letter | Cover Letter(s) | 323.65 KiB | September 07 2023 |
Request for Class II Permissive Change September 7, 2023 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 FCC ID Applicant : JVCKENWOOD Corporation
: IOMJ5284 To Whom It May Concern:
This is to request a Class II permissive change for FCC ID: IOMJ5284 granted on 09/29/2022. We found that the output power for Bluetooth of the mass production products was higher than the original filing. Original filing: 0.0008 W (-1.09 dBm) Surveillance: 0.0022 W (3.50 dBm) The output powers still compliant, but 5 dB higher than in the original submission, and we realized that the products submitted for the original testing had a poorly soldered temporary RF cable for Bluetooth, so the power wasn't measured to them to the maximum. There is no change to the software or hardware of the product itself. This permissive change application is to correct the output power of Bluetooth (DSS) by conducting the output power testing on the correct sample. We confirmed that this does not affect to the output power result for WLAN (DTS/NII). We have confirmed with FCC in advance that it can be proceeded as C2PC. Please refer to attached Theory of Operation for details. Meanwhile we submit the following documents. Test Report RF Exposure Theory of Operation We performed the testing and confirmed that this product still meets the minimum requirements of the applicable rules of FCC. Please refer to the test report submitted with this application. Thank you for your attention to this matter. Sincerely, Masayuki Ikeda JVCKENWOOD Corporation 2967-3,Ishikawa-machi,Hachioji-shi,Tokyo,192-8525 Japan Tel +81-42-646-5525
1 2 3 4 | 02 FCC Request for Confidentiality Letter | Cover Letter(s) | 342.03 KiB | September 07 2023 |
Request for Confidentiality Date: August 29, 2023 UL Verification Services Inc. 47173 Benicia Street, Fremont, CA 94538 Applicant : JVCKENWOOD Corporation FCC ID
: IOMJ5284 To whom it may concern:
Please be advised that the following information is to be held confidential on behalf of us, referring to the FCC rules 0.457 and 0.459:
Theory of Operation The application contains technical information which we deem to be trade secrets and proprietary. If made public, the information might be used to the disadvantage of the applicant in the market place. Thank you for your attention to this matter. Sincerely, Masayuki Ikeda JVCKENWOOD Corporation 2967-3,Ishikawa-machi,Hachioji-shi,Tokyo,192-8525 Japan Tel +81-42-646-5525
1 2 3 4 | 03 Short-Term Confidential FCC Test Setup Photo DTS | Test Setup Photos | 388.85 KiB | September 29 2022 / January 08 2023 | delayed release |
1 2 3 4 | 03 Short-Term Confidential Test Setup Photo - Antenna | Test Setup Photos | 1.90 MiB | September 29 2022 / January 08 2023 | delayed release |
1 2 3 4 | 03 Short-Term Confidential FCC Test Setup Photo DSS | Test Setup Photos | 369.87 KiB | September 29 2022 / January 08 2023 | delayed release |
1 2 3 4 | 03 Short-Term Confidential FCC Test Setup Photo NII | Test Setup Photos | 386.28 KiB | September 29 2022 / January 08 2023 | delayed release |
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2023-09-07 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | Class II Permissive Change |
2 | 2022-09-29 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
3 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter | ||
4 | 5745 ~ 5805 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 | Effective |
2023-09-07
|
||||
1 2 3 4 |
2022-09-29
|
|||||
1 2 3 4 | Applicant's complete, legal business name |
JVCKENWOOD Corporation
|
||||
1 2 3 4 | FCC Registration Number (FRN) |
0017389966
|
||||
1 2 3 4 | Physical Address |
2967-3, Ishikawa-machi Hachioji-shi
|
||||
1 2 3 4 |
2967-3, Ishikawa-machi
|
|||||
1 2 3 4 |
Tokyo, N/A
|
|||||
1 2 3 4 |
Japan
|
|||||
app s | TCB Information | |||||
1 2 3 4 | TCB Application Email Address |
L******@ul.com
|
||||
1 2 3 4 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 4 | Grantee Code |
IOM
|
||||
1 2 3 4 | Equipment Product Code |
J5284
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 | Name |
M**** I****
|
||||
1 2 3 4 | Title |
Manager
|
||||
1 2 3 4 | Telephone Number |
81-42********
|
||||
1 2 3 4 | Fax Number |
81-42********
|
||||
1 2 3 4 |
i******@jvckenwood.com
|
|||||
app s | Technical Contact | |||||
1 2 3 4 | Firm Name |
UL Japan, Inc.
|
||||
1 2 3 4 | Name |
K**** N****
|
||||
1 2 3 4 | Physical Address |
1-22-3 Megumigaoka, Hiratsuka-shi
|
||||
1 2 3 4 |
Kanagawa-ken, 259-1220
|
|||||
1 2 3 4 |
Japan
|
|||||
1 2 3 4 | Telephone Number |
81-46********
|
||||
1 2 3 4 |
+8146********
|
|||||
1 2 3 4 | Fax Number |
81-46********
|
||||
1 2 3 4 |
K******@ul.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 3 4 | Yes | |||||
1 2 3 4 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 01/08/2023 | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter | ||||
1 2 3 4 | DTS - Digital Transmission System | |||||
1 2 3 4 | NII - Unlicensed National Information Infrastructure TX | |||||
1 2 3 4 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Monitor with Receiver | ||||
1 2 3 4 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes | ||||
1 2 3 4 | No | |||||
1 2 3 4 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 | Purpose / Application is for | Class II Permissive Change | ||||
1 2 3 4 | Original Equipment | |||||
1 2 3 4 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 | Grant Comments | Class II Permissive Change to correct the output power. Output power listed is Conducted(Peak). The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 3 4 | Output power listed is Conducted(Peak). The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. | |||||
1 2 3 4 | Output power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except the conditions shown in this filing and/or in accordance with FCC multi-transmitter product guidelines. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode for 5 GHz bands. | |||||
1 2 3 4 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 | Firm Name |
UL Japan, Inc. SHONAN EMC LABORATORY
|
||||
1 2 3 4 | Name |
A**** H****
|
||||
1 2 3 4 |
I**** I********
|
|||||
1 2 3 4 | Telephone Number |
81-46********
|
||||
1 2 3 4 |
A******@ul.com
|
|||||
1 2 3 4 |
I******@ul.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0022000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | CC | 2412.00000000 | 2462.00000000 | 0.1762000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15C | CC | 2402.00000000 | 2480.00000000 | 0.0008000 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15E | CC MO | 5745.00000000 | 5805.00000000 | 0.0121000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC