EC2832 KAGA FEI Co., Ltd. 17-Nov.2022 Ver.0.4 User manual
(for EC2832) FCC ID: 2A6NFEC2832 IC: 28568-EC2832 KAGA FEI Co., Ltd. 1/5 EC2832 KAGA FEI Co., Ltd. 17-Nov.2022 Ver.0.4 This module should be installed in the host device according to the interface specification . 1) Japan Regulatory Information a) This module is approved with the specic antenna on this module. b) Please ensure that your product can bear a label with the following information. If the product is so small that it is not practicable to place the label, please place it in the instruction manual and package. This product installs a radio system which has been approved as a radio station in a low power data communication system based on the Radio Law. EC2832 : 005-103090 2) Canada Regulatory Information The following information must be indicated on the host device of this module;
a) This device complies with Innovation, Science and Economic Development Canadas applicable licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
1) lappareil ne doit pas produire de brouillage;
2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. b) This product is certified as type of the portable device with Science and Economic Development Canada Rules. To maintain compliance with RF Exposure requirement, please use within specification of this product. Ce produit est certifi comme type de l'appareil portable avec Rgles de Innovation, Sciences et Dveloppement conomique Canada. Pour maintenir l'acquiescement avec exigence Exposition de RF, veuillez utiliser dans spcification de ce produit.
- IC: 28568-EC2832 c) Please notify certified ID by either one of the following method on your product.
-Contains IC : 28568-EC2832 Specifiez ID certifie dans votre produit par une de mthode suivante.
-Contains IC : 28568-EC2832 KAGA FEI Co., Ltd. 2/5 EC2832 KAGA FEI Co., Ltd. 17-Nov.2022 Ver.0.4 3) FCC Regulatory Information a) This device complies with part 15 of the FCC Rules.
-Part 15 Subpart C b) The following statement shall be indicated on the host device or the user manual of the host device; Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. c) Please notify certified ID by either one of the following method on your product.
-Contains Transmitter Module FCC ID: 2A6NFEC2832
-Contains FCC ID: 2A6NFEC2832 d) The following statement shall be indicated in the user manual of the host device;
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the uses authority to operate the equipment. e) The modular transmitter is only FCC authorized for the specific rule parts (Part 15 Subpart C) listed on the grant, and the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification. The final host product still requires Part 15 Subpart B compliance testing with the modular transmitter installed. f) This product is certified as type of the portable device with FCC Rules. To maintain compliance with RF Exposure requirement, please use within specification of this product. g) The following statement shall be indicated in the user manual of the host device; The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. h) This module can change the output power depending on the circumstances by the application software which is developed by module installer. Any end user cannot change the output power. i) Antenna List No.1 Antenna Category Antenna Type Dimensions No.2 Antenna Category Antenna Type Dimensions Monopole PCB antenna 9.0mm x 2.7mm Monopole Chip antenna 2.0mm x 1.25mm 4) CE Regulatory Information a) When your end product installs this module, it is required to proceed additional certification processes before placing on the market in EU member states to make your products fully comply with relative EU standards. b) KAGA FEI can provide you the test reports of conducted measurement portion for the radio module. You can utilize the test reports for the certification processes of your end product as it requires radio testing. KAGA FEI Co., Ltd. 3/5 EC2832 KAGA FEI Co., Ltd. 17-Nov.2022 Ver.0.4 Control No.
(1/2) Control name Pin Layout Pin Descriptions Pin 1 Pin name DCC Pin function Power Description DC/DC converter output pin (built-in LC for DC/DC). 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 DEC4 GND VCC_NRF GND P0.04 AIN2 P0.05 AIN3 P0.06 P0.07 P0.08 NFC1 P0.09 NFC2 P0.10 GND Power Ground Power Ground 1V3 regulator supply decoupling. Input from DC/DC converter. Output from 1.3 V LDO. Ground pin. (0 V) Power supply pin. Ground pin. (0 V) Digital I/O Analog input Digital I/O Analog input General purpose I/O pin. SAADC/COMP/LPCOMP input. General purpose I/O pin. SAADC/COMP/LPCOMP input. Digital I/O Digital I/O Digital I/O NFC input Digital I/O NFC input Digital I/O Ground General purpose I/O pin. General purpose I/O pin. General purpose I/O pin. NFC antenna connection. General purpose I/O pin. NFC antenna connection. General purpose I/O pin. Ground pin. (0 V) SWDIO Digital I/O Serial Wire Debug I/O for debug and programming SWDCLK Digital input Serial Wire Debug clock programming input for debug and P0.13 P0.14 TRACEDATA[3]
P0.17 P0.18 TRACEDATA[0]
P0.21 RESET GND Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O General purpose I/O pin. General purpose I/O pin. Trace port output. General purpose I/O pin General purpose I/O pin Trace port output. General purpose I/O pin Configurable as system RESET pin.
(Factory default : GPIO) Ground Ground pin. (0 V) OUT_MOD RF In/Out RF I/O pin. It should be connected to Pin 23 OUT_ANT for normal operation. KAGA FEI Co., Ltd. 4/5 EC2832 KAGA FEI Co., Ltd. 17-Nov.2022 Ver.0.4 Control No.
(2/2) Control name Pin Layout Pin Pin name Pin function Description 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 OUT_ANT Antenna In/Out Internal antenna. It should be connected to Pin 22 OUT_MOD for normal operation. P0.22 P0.23 P0.24 P0.25 P0.26 P0.27 P0.28 AIN4 P0.29 AIN5 P0.30 AIN6 P0.31 AIN7 P0.02 AIN0 P0.03 AIN1 P0.11 P0.12 P0.15 TRACEDATA[2]
P0.16 TRACEDATA[1]
P0.19 P0.20 TRACECLK Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Analog input Digital I/O Analog input Digital I/O Analog input Digital I/O Analog input Digital I/O Analog input Digital I/O Analog input Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O Digital I/O General purpose I/O pin. General purpose I/O pin. General purpose I/O pin. General purpose I/O pin. General purpose I/O pin. General purpose I/O pin. General purpose I/O pin. SAADC/COMP/LPCOMP input. General purpose I/O pin. SAADC/COMP/LPCOMP input. General purpose I/O pin. SAADC/COMP/LPCOMP input. General purpose I/O pin. SAADC/COMP/LPCOMP input. General purpose I/O pin. SAADC/COMP/LPCOMP input. General purpose I/O pin. SAADC/COMP/LPCOMP input. General purpose I/O pin. General purpose I/O pin. General purpose I/O pin. Trace port output. General purpose I/O pin. Trace port output. General purpose I/O pin. General purpose I/O pin. Trace port clock output. 42 to 47 GND Ground Ground pin. (0 V) KAGA FEI Co., Ltd. 5/5