FCC ID: PAZMW-1100PROX-R Active Noise Cancelling True Wireless Stereo Earbuds

FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. www.minuswire.com Support contact:

E-mail: support@minuswire.com MANUFACTURER Dongguan Kantsang Electroacoustic Technology Co., Ltd. Address: No.8, Lu Yi Yi Road, Tangxia, Dongguan, China FCC ID: PAZMW-1100PROX FCC ID: PAZMW-1100PROX-R MADE IN CHINA MW-1100ProX MODEL: MW-1100ProX ACTIVE NOISECANCELLING TRUE WIRELESS STEREO EARBUDS User Guide PACKAGE CONTENTS (Fig. 1) PRODUCT DIAGRAM (Fig. 2) 1 2 Active Noise-Cancelling True Wireless Stereo Earbuds (MW-1100ProX) 6 x Ear Tips (two are equipped on the earbuds) EN 1 x USB Charging Cable 1 x User Manual 1 x Quick Start Guide EN Product Diagram Charging Contacts USB-C Charging Port Charging Slot Charging Indicators Touch Sensor area LED Indicator Charging Case Microphone may cause re hazard, warranty voidance, and/or property loss. Close attention is needed when using near children. Keep the charging case away from water, rain or any other liquid. Dont use the product in thunderstorm to avoid malfunction or electric shock. Always ask a professional technician or authorized personnel for repair. This product contains lithium battery. Never expose it to excessive heat such as direct sunlight or re to avoid explosion. HOW TO WEAR Choose the Right Tips (Fig. 3) Ear tips with different sizes are included in the package, try all sizes and choose the ones tting you best. EN 01 IMPORTANT SAFETY INSTRUCTIONS Please read the instructions thoroughly before using this product and retain it for future reference. Hearing Safety Do not wear earbuds with high volume for a long time to avoid damaging your hearing. Set the earbuds to low volume before you put them on, then increase the volume gradually as per your preference. Do not set volume too high to stay aware of your surroundings. Please refer to local laws and regulations if you want to answer phone calls via this device during driving. For your safety, avoid distraction from music or phone calls when you are driving or doing other activities with potential dangers. Warning: Please set the volume to proper level to avoid hearing damages. Caution Do not expose this product to high temperatures. Do not immerse the earbuds into water or expose them to humidity for a 3 Do not clean the product with detergent containing alcohol, ammonia, long time. benzene or abrasives. Avoid dropping. Place the earbuds back into the charging case when not in use and keep it away from children and pets to avoid choking hazard. Unauthorized disassembly of any parts of this product is forbidden, which 02 Wear the Earbuds (Fig. 4) Please wear the earbuds as shown below. 4 Note:

Please fully charge the earbuds when using them for the rst time. When battery is low, a Battery Low Please Recharge voice prompt will be heard (if you are wearing the earbuds). Please charge it in time or the earbuds will turn off automatically around 10 minutes later. Charge the earbuds at least once every 3 months when not using for a long time. 5 L 6 R Pictures only for reference. Bluetooth Caution When the device is connected wirelessly to another device, place the two devices close to each other to achieve their normal functionalities and avoid possible signal interference. When using a wireless connection, make sure there are no obstacles between the two devices. Obstacles including walls and fences may shorten the effective range. USING YOUR EARBUDS 7 Charging Charging the Earbuds (Fig. 5) (Fig. 6) 1. Put the earbuds into the charging case as per the L (left) and R (right) marks

(Fig. 5). 2. Cover the lid and charging will start automatically (Fig. 6). 03 Charging the Charging Case (Fig. 7) 1. Connect the charging port with any USB charging adapter or active computer USB port (Fig. 7). 2. The four step charging bar will light up progressively. Note: Unplug the charging cable (timely) when fully charged. 04 Charging (Fig. 8) Charging the earphones Earphone light on during charging 100% Full charged, earphone lights go out Charging the charging box Power On (Fig. 9) Uncover the lid, the earbuds will power on automatically. The LED indicators on both earbuds will light up red and then blue. 9 L R

<25%

25%-50%

50%-75%

75%-100%

100%

Twinkle Power Off (Fig. 10) Put the earbuds into the charging case and cover the lid. The earbuds will turn off automatically. 10 L R You can use one earbud or both earbuds as per your preference. Please refer to the corresponding pairing instructions. Before pairing, please turn off other Bluetooth devices and place the device to be connected close to the earbuds. When the earbuds are disconnected from your device for more than 5 minutes, they will turn off automatically. 06 8 05 Pairing (Fig. 11) If keep the lid open but there is no Bluetooth connection is made for 5 minutes. The earbuds will turn off automatically. 11 L R Note:

If the earbuds failed to pair with each other, please disconnect the Bluetooth connection with your device, put them back into the charging case, close the lid then open it and take out the earbuds to pair again. It is not recommended to wear the two earbuds on different people. If needed, please keep the 2 earbuds within 3 meters / 9.8 feet in couple earbuds mode. Couple Earbuds Mode 1. Uncover the lid and the earbuds will turn on automatically. They will connect with each other. Once connected, The LED indicator on Right earbud will ash blue and red alternatively. The LED indicator on Left earbud will ash blue intermittently indicating the earbuds are in pairing mode now. 2. Turn on the Bluetooth function on your device and search for nearby devices. Find MW-1100ProX in the searching results, tap on the name to connect. 3. Once connected, the LED indicators on both earbuds be turned blue 4. Take out both earbuds from the charging case. The LED indicators on both intermittently. earbuds be turned off. Single Earbud Mode 1. Repeat the steps correspond to Couple Earbuds Mode. Take out one earbud from the charging case, and make sure the other one is placed in the charging case. Note:

If you want to change to couple mode, simply take out the other earbud from the charging case, they will pair with each other automatically. If you want to swap to another earbud, simply take out the other earbud from the charging case and put the earbud just being used back to charging case. Note:

If you want to pair the earbuds with another device when you have already paired them with a device, deactivate the Bluetooth function on the paired device or clear MW-1100ProX from its Bluetooth list. 07 08 OPERATION AND FUNCTIONS CLEANING AND MAINTENANCE Function Operation Voice Prompt from earbuds Answer Phone Call Press the touch sensor area on either of the earbuds 1 times none Hang up Phone Call Press the touch sensor area on either of the earbuds 2 times none Long press the touch sensor area on either of the earbuds for 2 seconds Call Rejected Reject Incoming Call Previous Track (Not available when use in single earbud mode) Next Track (Not available when use in single earbud mode) Play / Pause Press the touch sensor area on the left earbud 2 times Press the touch sensor area on the right earbud 2 times Press the touch sensor area on either of the earbuds once none none none ANC mode / Ambient mode (Not available when use in single earbud mode) Long Press the touch senor area for 2 seconds, (left / right earphone) to toggle between ANC on, Ambient Sound, and ANC off ANC ON >

Ambient Sound > ANC Off Activate Siri / Google Assistant When the earbuds are paired with your device successfully, press 3 times the touch sensor area (left / right earphone) none 1. Clean the earbuds and the charging case on a regular basis. 2. Use dry and soft cotton cloth to wipe the unit. Note: Do not insert anything into the product. 3. Keep away from sharp objects to avoid scratches. 4. Put the unit in a dry and shady place if it is to be idle for a long time. 5. Do not clean the product with detergent or chemicals. TROUBLESHOOTING No. Problem Solution 1 2 3 4 Failed to turn on the earbuds Failed to charge the earbuds Earbuds low battery, please charge them Place the earbuds into the charging case properly Make sure the charging case is charged fully Cant charge the charging case Make sure the charging cable is intact and plugged in properly Cant nd MW-1100ProX in the Bluetooth device list The earbuds reconnected with previously paired device automatically:

Deactivate the Bluetooth function of previously paired device or clear MW-1100ProX from its Bluetooth device list, and then search again 09 10 5 6 Failed to pair the earbuds with your device No sound in one of the earbuds in couple earbuds mode 7 Poor sound quality 8 Unstable connection Turn on the device and activate its Bluetooth function before pairing Bring the earbuds into pairing mode as instructed in the Pairing section Place both earbuds back to the charging case then take them out, they will pair with each other automatically. If pairing failed, restore them back to the factory settings as instructed in the Clear Pairing List section Wear the earbuds properly and keep them close to each other Place the connected device close to the earbuds or remove the obstacles between them Clear the debris on the earbuds The effective distance may shorten with obstacles in the way Turn off other Bluetooth devices to decrease the interference 9 Cant hear the other party during a phone call Set the volume to higher level The other party cant hear your voice during a phone call 10 11 Free the built-in microphone of any covers 11 Noise-Cancelling doesnt work Make sure use in couple earbud mode. Wear the earbuds properly and keep them close to each other Place the connected device close to the earbuds or remove the obstacles between them Clear the debris on the earbuds 12 Touch sensor area of the earbuds is unresponsive Place the two earbuds into the charging case and cover the lid, disconnect the Bluetooth connection. Uncover the lid to turn on the earbuds and pair again WARRANTY AND SERVICE If any problems occur, please contact the Minuswire Customer Care Centre in your country via the contact information listed in this User Guide. 12

Kan Tsang New Technology Development Limited. 2020-11-05 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen Tongce Testing Lab. / 1B/F., Building 1, Yibaolai Industrial Park, Qiaotou, Fuyong, Baoan District, Shenzhen, Guangdong, China (Name of Agent company name and address) to act as our agent this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each imported or marketed, as defined in the Federal Communications unit manufactured, Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. in the preparation of For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditionsfor certification, still resides with Kan Tsang New Technology Development Limited./ Unit 1, 11/F., Nan Fung Commercial Centre, No. 19 Lam Lok Street, Kowloon Bay, Hong Kong (Applicant Name and address)

<Signature>

Name: Alex Chiu Title: VP-Sales & Marketing Applicant Company: Kan Tsang New Technology Development Limited.

Kan Tsang New Technology Development Limited. 2020-11-05 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: PAZMW-1100PROX-R Product Name: Active Noise Cancelling True Wireless Stereo Earbuds Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors.

<Signature>

Name: Alex Chiu Title: VP-Sales & Marketing Company: Kan Tsang New Technology Development Limited.

Product: Active Noise Cancelling True Wireless Stereo Earbuds Model No.: MW-1100ProX FCC ID: PAZMW-1100PROX FCC ID: PAZMW-1100PROX-R The device have left and right earphones the left earphone apply FCC ID with FCC ID: PAZMW-1100PROX; the right earphone apply FCC ID with FCC ID: PAZMW-1100PROX-R.

<Signature>

Name: Alex Chiu Title: VP-Sales & Marketing Company: Kan Tsang New Technology Development Limited.