CHKTC. USER MANUAL WWW. kt-tech.com.hk User manual Thank you Thank you for purchasing the Bluetooth Speaker Phone HKTC-9020 We hope you enjoy it! This instruction manual will get you.started and ready to make the most of your speaker. About Bluetooth Speaker Phone HKTC-9020 HKTC-9020 uses the newest Bluetooth wireless technology to connect to any device with Bluetooth such as mobile phones, PDA, notebooks etc. Product overview 1 LED Light 2 Power/Answer/End Button 3 Microphone 4 Charger connector 5 USB cable 1 4 \
(i, \
ee Imagel Power Image2 Image3 Charger _Image4 button side Bottom side connector side USB cable What your HKTC-9020 speaker does
+ Transfer music from your phone or other bluetooth device to your speaker
+ Answer calls
+ End calls
+ Reject calls Product Product Model HKTC-9020 Version 3.0 Class II 2.402GHz~2.480GHz, ISM Band time Bluetooth Internal rechargeable battery charged by USB cable.
-20~
USB Cable Getting Started You should follow three steps before using your speaker 1. Charge your speaker 2. Turn your speaker on 3. Pair your speaker to your mobile phone Charge your speaker a. Plug one end of the USB cord to a computer/notebook device and the other end to the Bluetooth speaker b. While charging LED light will be red when the light turns blue, the device is fully charged. c. Make sure that your speaker is fully charged for two hours before you start using it. d. When the LED light flashes with beep, it means the battery level is low, please charge immediately. e. Charge in a-20 to +50C temperature range environment. f. Charge time: around 3. Shours. Turn your speaker on and off a. Press the power/answer/end button for 2-3 seconds, blue light will flash 3 times with a beep, and then the light will flash quickly meaning power is on. b. When the speaker is on, it will automatically detect the previous device which was paired (if that device is also on and within 10 meters range) and will be paired with the device.The LED light will be flashing continuously for 2 seconds,meaning the device in paired mode. Press the power/answer/end button 4~5 seconds to turn off your speaker. Red light will flash for 0.5 seconds with a beep and the device will be off. d. standby status: turning off power after 4~5 minute if it does not connect other equipment. Pairing with your phone Speakers are connected to phones using a procedure called pairing By following a few simple steps, a phone can be paired with the speaker easily. Put the speaker in pairing mode a. Press the power button for S6 seconds, when you see the blue and red LED light flashing alternately, the device is in pairing mode. b. Please make sure your mobile device with bluetooth function is on, please read your device user manuals to learn the bluetooth functions. c. The words 'HKTC-9020'will appear in the menu of devices found in your mobile phone or device being paired. Select HKTC-9020';. d. Enter the passcode 0000 to pair and connect the headset to your device, the LED light will switch from the alternating red and blue to a blue flash, meaning the pair is successful. e. If pairing is unsuccessful after some time, the speaker will automatically enter standby mode and the blue light will flash quickly but you will not be able to use the speaker. Please follow the above steps to repair. Call handling When you receive a call, you hear a ringing tone through the speaker. To answer the call, press the answer key lightly. To reject an incoming call, press and hold the answer key for 2 to 3 seconds until you hear a beep and let go. To end a call, press the answer key lightly, or wait for the other party to hang up. Note:
The voice control function depends on your mobile phone spec Volume Control This device has only one multi-function button, please adjust the volume from your phone and other devices. Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you protect your warranty coverage.
* Keep all accessories and enhancements out of the reach of small children.
* Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can contain minerals that will corrode electronic circuits. If your device does get wet, allow it to dry completely.
* Do not use or store the device in dusty, dirty areas. Its moving parts and electronic components can be damaged. Do not store the device in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.
* Do not store the device in cold areas. When the device returns to its normal temperature, moisture can form inside the device and damage electronic circuit boards. Do not attempt to open the device.
* Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics.
* Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device.
* Do not paint the device. Paint can clog the moving parts and prevent proper operation. All of the above suggestions apply equally to your device, battery, charger, or any enhancement. If any device is not working properly, take it to the nearest authorized service facility for service. Package Content Please ensure the following items are included within this Bluetooth Speaker package before your purchase:
1. Bluetooth Speaker Phone HKTC-9020 2. Product User Guide 3. USB Cable Terms of Maintenance Dear users:
Thank you for choosing HKTC products. To ensure that you can fully experience the good quality and after-sales service , in order to provide effectively the obligations of operators and safeguarding the law rights or interests of consumers, please read carefully the uality of the product warranty card. The instructions and properly preserved. Our company provide users with services the following terms :
1.We promise: Product warranty period: from the purchase date Products sold to implement a replacement in one month, one year warranty as after-sale service.Policy such as product quality problems occur within the first month, you can choose to replace a new one. Within one year warranty period, you can choose any HKTC specific agency for free repair. 2.The length of service of HKTC series product effects from the date of purchase. After-sales Service limits under normal circumstances, due to consumer use, maintenance, protection. If caused by improper damage, or repaired by non authorized dealer, warranty for maintenance will be appropriate to charge the appropriate costs. The above warranty is limited to services within the time written on this certificate, as well as services provided by the HKTC customer service center . If you have any questions, please contact the HKTC service center in the corresponding period of time. For further information ,please visit WWW.kt-tech.com.hk REMARK changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.