FCC ID: 2ATPV-KDRC Kandao Meeting Remote Control / Kandao Meeting Remote Control 2

https://www.kandaovr.com/quickstart/meetingultra/

FCC STATEMENT :

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

This device may not cause harmful interference, and

This device must accept any interference received, including interference that may cause

undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:

The device has been evaluated to meet general RF exposure requirement. The device can

be used in portable exposure condition without restriction.

Kandao Meeting Remote Control Model : MT0822 KanDao Technology Co.,Ltd Made in China FCC ID :2ATPV-KDRC 210-213122

KanDao Technology Co.,Ltd. Section 2.911(d)(5)(i) Certification Equipment Type Company name: KanDao Technology Co.,Ltd. Address: 503, Building 1, Dayun Soft Parts Town, 8288 Longgang Avenue,Yuanshan Street,Longgang District, Shenzhen, China Product Name: Kandao Meeting Remote Control / Kandao Meeting Remote Control 2 FCC ID: 2ATPV-KDRC Model(s): MTRC, RM0822 2.911(d)(5)(i) Equipment Type We, [KanDao Technology Co.,Ltd.] certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name: xia chuan Date: 2023-06-09 Title and Company name: manager/ KanDao Technology Co.,Ltd. NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

KanDao Technology Co.,Ltd. Section 2.911(d)(5)(ii) Certification Applicant (Covered List) Company name: KanDao Technology Co.,Ltd. Address: 503, Building 1, Dayun Soft Parts Town, 8288 Longgang Avenue,Yuanshan Street,Longgang District, Shenzhen, China Product Name: Kandao Meeting Remote Control / Kandao Meeting Remote Control 2 FCC ID: 2ATPV-KDRC Model(s): MTRC, RM0822 2.911(d)(5)(ii) Applicant filing We, [KanDao Technology Co.,Ltd.] certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: xia chuan Date: 2023-06-09 Title and Company name: manager/ KanDao Technology Co.,Ltd. NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.2

KanDao Technology Co.,Ltd. Section 2.911(d)(7) USA Agent for Service of Process Company name: KanDao Technology Co.,Ltd. Address: 503, Building 1, Dayun Soft Parts Town, 8288 Longgang Avenue,Yuanshan Street,Longgang District, Shenzhen, China Product Name: Kandao Meeting Remote Control / Kandao Meeting Remote Control 2 FCC ID: 2ATPV-KDRC Model(s): MTRC, RM0822 2.911(d)(7) USA Designated Agent for Service of Process We, [KanDao Technology Co.,Ltd.] designate [KanDao US LLC] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: KanDao US LLC Address: 2108 N ST. STE N SACRAMENTO, CA SACRAMENTO, CA 95816 United States Applicant Company name: KanDao Technology Co.,Ltd. Address: 503, Building 1, Dayun Soft Parts Town, 8288 Longgang Avenue,Yuanshan Street,Longgang District, Shenzhen, China FRN:

0033657990 Contact Name: Jiawei Chen Telephone No: (510) 295-0590 Email: jiawei@kandaovr.com FCC ID Number: 2ATPV-KDRC Contact Name: xia chuan Telephone No: +8618623237154 Email: xc@kandaovr.com 2.911 (d)(7)USA Agent v1.2 KanDao Technology Co.,Ltd. Signature:

Title: Manager Date: 2023-06-09 Signature:

Title: manager Date: 2023-06-09 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.2

KanDao Technology Co.,Ltd. Agent Authorization Letter

(2023-06-09) RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, authorize Micom Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. This agreement expires one year from the current date. Sincerely, xia chuan/ manager Company Name: KanDao Technology Co.,Ltd. Address: 503, Building 1, Dayun Soft Parts Town, 8288 Longgang Avenue, Heao Community, Yuanshan Street, Longgang District, Shenzhen, China

KanDao Technology Co.,Ltd. Declaration on Model Differences We, KanDao Technology Co.,Ltd. 503, Building 1, Dayun Soft Parts Town, 8288 Longgang Avenue,Yuanshan Street,Longgang District, Shenzhen, China Declare that the following product(s):

FCC ID: 2ATPV-KDRC Product Name: Kandao Meeting Remote Control / Kandao Meeting Remote Control 2 Model No.: MTRC, RM0822 Utilize the identical circuit design, PCB layout, shielding and interface with (MTRC), only the model number and Key screen printing different. Therefore this application can be regarded as identical in performance to the submitted test sample. The manufacturer would take all the responsibilities for the above product(s). For and on behalf of Authorized person Name: xia chuan Position: manager Date of issue: 2023-06-09

*I hereby declare that I am entitled to sign on behalf of the applicant and that the information supplied is correct and complete.

KanDao Technology Co.,Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2ATPV-KDRC Date: 2023-06-09 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description SW SECURITY DESCRIPTION Parts List Tune up In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: xia chuan Title: manager