3 D V R D i g i t a l C a m e r a Go KanDao Obsidian 3D VR GO) Product description K a n D a o O b s i d i a n G o 3 D V R D i g i t a l C a m e r a 1.1 3D VR 1.2 1.3 2.1 2.2 2.3 2.4 1.1 3D VR 1 2 3 4 5 6 7 8 9 closed open 10 11 12 13 1. 2. 3. 4. 5. 6. TF 7. 8. 9. 10. Zoom 11. Micro USB 12. 13. 12V MOV 1015 g TF, 128G H.264 7.4V, 12V 10.5 W 1728 * 1728 4608 * 3456 30 fps
-10 ~ 40 C 10~90% RH
-40 ~ 80 C 5~90% RH 2404MHz-2476MHz 1.2
+)
: Vrperception
: VR Perception Rebenstrasse 33 MP_VER.01.00.13_20170830
:KSA_6_S206_V1.2
:KSA_6_S206_POWER_V1.3 2.5dBm 2.5dBm 8307 Effretikon Switzerland 1.3 1 1 2 2 0.7 1 1 1 1 12V 2A 2.1
[]
10%[]
5%
[]
2.2
[TF]
TF8G-128Gclass10 TF 2.3
[] []
[]
[ ]
[]
2.4
[]
Timelapse10
[]
[ ]
[]
[]
[]
4
[
]
:
///[
]
Product Description Table of Contents 1, Nomenclature 1.1 3D VR panorama camera 1.2 Camera specification parameters 1.3 Standard accessories 2, Using the camera 2.1 Battery charging 2.2 Insert the memory card 2.3 Switch on/off 2.4 Photograph& Video-record Please read the product descripiton carefully before using the device. 1, Nomenclature 1.1 3D VR panorama camera 1 2 3 4 5 6 7 8 9 closed open 10 11 12 13 1. Power indicator lamp 2. Power button 3. Timelapse button 4. Camcorder button 5. Working mode lamp 6. TF card slot 7. Mic 8. Lens 9. Battery cover 10. Zoom audio port 11. Micro USB port 12. Tripodquick shoe 13. 12V external powersupply port 1.2 Camera specification parameters Name Video format Description MOV Weightcamera+battery 1015 g Memory medium TF card Video coding format H.264 Power 10.5 W Working voltage battery 7.4V, adapter 12V Video resolution single lens 1728 * 1728 Photograph resolution single lens 4608 * 3456 Frame rate 30 fps Working temperature
-10 ~ 40 C Working humidity 10~90% RH Storage temperature
-40 ~ 80 C Storage humidity 5~90% RH Frequency range 2404MHz-2476MHz E.I.R.P:
2.5dBm for remote control 2.5dBm for Camera Software version MP_VER.01.00.13_20170830 Hardware version MainboardKSA_6_S206_V1.2 Power stripKSA_6_S206_POWER_V1.3 Importers Company Name: Vrperception Address: VR Perception Rebenstrasse 33 8307 Effretikon Switzerland 1.3 Standard accessories Name Quantity Carrying case Remote control Remote control battery Pearl cotton Donble-ended audio cable 0.7m Instructions Adapter gift box(gift) Adapter 12V 2A (gift) 1 1 2 2 1 1 1 1 Carrying case Adapter Remote control Camera Remote control batteries Audio cable 2, Using the camera 2.1 Charging Rotate the battery cover clockwiseto unload the batteries. Rotate anti-clockwise to seal the cover. batteries Power charge: When battery power is exhausted, charge the battery with the accessorized battery charger. Low power The [power indicator lamp] will flash slowly when power is below 10% and will flash quickly when power is below 5%. Power indicator lamp will flash when power is low 2.2 Insert the memory card Please insert all six TF cards before shooting, make sure you insert from the right direction. The TF cards are used for data storage. Reminder:
Please choose 8G-128G TF card of formal manufacture with an access speed class of above class10. TF card 2.3 Switch on/off Power on: Shortly press the [power button], if the camera is turned on normally, the power lamp will keep red, and the six [working mode lamps] will keep blue. Shortlypress [power button]
to switch on camera Power off: Long press [power button]all indictor lamps will be off when the camera is powered off. 2.4 Photograph& Video-record Photograph: Shortlypress the
[Time-lapse button]to capturea photo. And the capture mode is 10-second time-lapse, shortlypress [the time-lapse]againto end the capture. During the capture, the blue [working mode lamps]will twinkle once. Shortlypress the [time-lapse button] to capture photo Shortlypress the [camcorder button] for record video Video-record: Shortlypress the
[camcorder button] to record video.Shortly pressthe button again to stoprecording.All
[working mode lamps] will be in quick flashesfor about 4 seconds,before the recording starts. During the recording process, [working mode lamps]
will flash slowly. Notice: If camerahasno TF-card /memory full /
abnormalworking status,the [working mode lamps]
will flashquickly. During recording,the flash isslower. FCC Special Statement FCC Regulatory Information Warning: changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. RF Exposure This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. FCC FCC FCC15 B
-
-
-
-/
FCC 20cm KanDao Technologys founders and core team members come from top universities all around the world such as the University of Hong Kong, Tsinghua University, Hong Kong University of Science and Technology, National University of Singapore and University of California, San Diego, with backgrounds in leading technology institutions such as Huawei, Tencent, Netease, CLP and other well-known enterprises. With strong research, development, and operational capabilities, Kandao sets a high international standard in the industry of panoramic virtual reality video making. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2AMZV-KDOG GET MORE HELP ( IF YOU NEED IT) CALL +86-755-26411369 ADD: Unit 5D, Block M7, SinoSteel Building, Nanshan, Shenzhen, China 9 Email: service@kandaovr.com WEB: www.kandaovr.com