FCC ID: IV9BSH16UH UHF RADIO

by: Kanematsu USA Inc latest update: 2009-02-23 model: BSH16UH

One grant has been issued under this FCC ID on 02/23/2009 (this is one of three releases in 2009 for this grantee). Public details available include internal & external photos, manuals, and frequency information. some products also feature user submitted or linked password defaults, warrantee terms, troubleshooting guides, instructions, & drivers.

permalink for this FCC identifier

search for: Repair details

from iFixIt

Trade-in? Recycling locations

eg for Slack usage

all	frequencies		exhibits	applications
		manual

all exhibits 10
1 ~ 2009-02-23 10

app s				submitted / available
1	Users Manual	Users Manual	pdf	1.53 MiB
1		Cover Letter(s)	pdf
1		External Photos	pdf
1		Internal Photos	pdf
1		Cover Letter(s)	pdf
1		ID Label/Location Info	pdf
1		ID Label/Location Info	pdf
1		RF Exposure Info	pdf
1		RF Exposure Info	pdf
1		Test Report	pdf

exhibit
download
text

Users Manual

Users Manual

pdf

1.53 MiB

<< KANEGENMATSU CORPORATION BS HH16 Users Manual INTRODUCTION This Manual describes the operation for the Kanematsu Handheld radio This Handheld is full-featured FM transceiver designed for flexible mobile business communications in the VHF or UHF Land mobile bands. This Land mobile radio can be programmed with 16 channels. Important channel frequency data is stored in EEPROM and flash memory on the CPU, and easily programmable by dealers using personal computer and PC EDITER software. FCC Requirements Your radio must be properly licensed Federal Communications Commission prior to use. Your Wireless dealer can assist you in meeting these requirements. Your dealer will program each radio with your authorized frequencies, signaling codes, etc., and will be there to meet your communications needs as your system expands. SAFETY WARNING INFORMATION READ THIS IMPORTANT INFORMATION ON SAFE AND EFFICIENT OPERATION BEFORE USING YOUR LAND MOBILE RADIO

* Only qualified technicians are allowed to repair this product. Do not operate the radio without a proper antenna attached. As this may damage the radio and may also cause to exceed FCC RF exposure limits. Typical electronic systems that may malfunction due to the lack of protection from radio frequency energy present when transmitting. If the vehicle contains such equipment, consult the dealer. Just as it is dangerous to fuel a vehicle with motor running, similar hazard exist when operation a mobile radio. Be sure to turn the radio off while fueling a vehicle. Do not operate the radio without a proper antenna attached, as this may damage the radio and may also cause you to exceed FCC RF exposure limits. Do not transmit for more than 50% of total radio use time. Transmitting more than 50% of the time can cause FCC RF exposure compliance requirements to be exceeded. Always Keep at least 1.5 cm between the antenna and operator while transmitting.

+ Always use authorized accessories. Dynamite blasting caps may be caused to explode by operating a radio within 500 feet of the blasting caps. Always obey the Turn Off Two Way radios signs posted where dynamite is being used. Do not install the radio in the closed compartment that contains an LP gas container or its fitting. No changes or adjustments shall be made to the equipment except by an authorized or certified electronic technician. Using your radio to send personal messages is a violation of FCC rules. Control and Connectors FRONT PANEL 1 VOL/PWR Knob (3) Turn this control clockwise to turn the radio on and increase the volume. Turn it counterclockwise into the click-stop to the radio off. 2 BUSY/TX Indicator Indicate transceiver Transmit/Receive Status Steady Red: Transmitting(High) in progress Steady Orange: Transmitting(Low) in progress Steady Green: Busy Channel 3 Channel Selectable Knob (2) Selectable channel Knob. 4 UDC Terminal (7) Connect the microphone or speaker. An external loudspeaker may be connected to this 2-contact. Caution: Do not connect either wire of this line to ground, and be certain that the speaker has adequate capability to handle the audio output (0.5W) from the radio. 5 8 Monitor Buttons (6) All channel activity can be monitored by pressing the button. SCAN Button (5) Switches the Scan Mode on and off. Antenna Connector (1) The 50-ohm to the antenna must be connected here, using a SMA plug. 7.5V DC Input The supplied Battery must be connected to this 2-contact. BASIC OPERATION Important! Before turning on the radio the first time, confirm that the power connections have been made correctly and that a proper antenna is connected to the antenna jack. Overview - Your authorized Dealer can program your radio for Conventional format. RECEIVE Switching Power ON Turn power on by the VOL/PWR knob. The radio will beep. Setting the volume Turn the VOL/PWR knob clockwise to increase the volume, and counterclockwise to decrease it. Select a Channel Use the rotary switch (channel knob) to select the operating channel. Transmitting Press the Monitor button to listen for channel activity When receiving a call, transmit only after the incoming call ends. The radio cannot receive a call and transmit simultaneously. Press PTT switch. If the channel is clear, the BUSY/TX indicator will grow red or orange. The radio is now transmitting. While holding in the PTT switch, speak across the face of the microphone in a clear and normal voice. For best transmission, hold the microphone about 1-1/2 to 2 inches away from your month. Release the PTT switch to receive. If the Busy Channel Lockout feature has been programmed on a channel, the radio will not transmit when a carrier is present. Instead, the radio will generate a continuous low-pitched tone wile PTT switch is pressed. Release the PTT switch and wait for the channel to be clear of activity. If CTCSS or Digital Code Squelch (DCS) Lockout has been programmed on a channel, the radio can transmit only when there is no carrier being received or when the carrier being received includes the correct CTCSS tone or DCS code. Time-Out Timer If the selected channel has been programmed for Time-Out timer, you must limit the length of each transmission, Wile transmitting, a beep will sound 10 seconds before time-out. Another beep will sound just before the deadline; The TX indicator will disappear the transmission will cease soon thereafter. To resume transmitting, you must release the PTT switch and wait for the penalty timer to expire (if you press the PTT switch before this timer expires, the timer restarts, and you will have to wait another penalty period) ADVANCED OPERATION MONITOR Press the monitor button hears background noise (unmute the audio); the BUSY/TX indicator will grow green. SCAN The Scanning feature is used to monitor multiple channels programmed into the transceiver. While scanning, transceiver will check each channel for the presence of a signal, and will stop on a channel if a signal is present. Press the SCAN button to active scanning. The scanner will search the each channels, looking for active ones; it will pause each time if finds a channel on which someone is speaking. Press the SCAN button again to disable scanning. Operation will revert to the before scan start channel.

		frequency	equipment class	purpose
1	2009-02-23	470 ~ 520	TNF - Licensed Non-Broadcast Transmitter Held to Face	Original Equipment

Application Forms

app s	Applicant Information
1	Effective	2009-02-23
1	Applicant's complete, legal business name	Kanematsu USA Inc
1	FCC Registration Number (FRN)	0011333770
1	Physical Address	543 West Algonquin Road
1		Arlington Hts., Illinois 60005
1		United States

app s	TCB Information
1	TCB Application Email Address	T******@TIMCOENGR.COM
1	TCB Scope	B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)

app s	FCC ID
1	Grantee Code	IV9
1	Equipment Product Code	BSH16UH

app s	Person at the applicant's address to receive grant or for contact
1	Name	M****** N**
1	Title	Manager
1	Telephone Number	847-9********
1	Fax Number	847-9********
1	E-mail	m******@kanematsuusa.com

app s	Technical Contact
		n/a

app s	Non Technical Contact
		n/a

app s	Confidentiality (long or short term)
1	Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	Yes
1	Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?:	No
	if no date is supplied, the release date will be set to 45 calendar days past the date of grant.

app s	Cognitive Radio & Software Defined Radio, Class, etc
1	Is this application for software defined/cognitive radio authorization?	No
1	Equipment Class	TNF - Licensed Non-Broadcast Transmitter Held to Face
1	Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant)	UHF RADIO
1	Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application?	Yes
1	Modular Equipment Type	Single Modular Approval
1	Purpose / Application is for	Original Equipment
1	Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization?	No
1	Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization?	No
1	Grant Comments	Power listed is conducted. This device must be restricted to work related operations in an Occupational/Controlled RF exposure Environment, not exceeding a maximum transmitting duty factor of 50%. All qualified end-users of this device must have the knowledge to control their exposure conditions and/or duration to comply with the Occupational/Controlled SAR limit and requirements. A label, as described in this filing, must be displayed on the device to direct users to specific training information for meeting Occupational Exposure Requirements. Body-worn operating configuration is limited to the specific belt-clip supplied for use with this product that provides at least 1.5 cm separation between the device and the users body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR values are - Head: 2.62 W/kg; Body-worn: 3.60 W/kg accounting for a 50% duty cycle.
1	Is there an equipment authorization waiver associated with this application?	No
1	If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?	No

app s	Test Firm Name and Contact Information
1	Firm Name	Timco Engineering, Inc.
1	Name	B**** C****
1	Telephone Number	352-4********
1	Fax Number	352 4********
1	E-mail	b******@timcoengr.com

Equipment Specifications
	Line	Rule Parts	Grant Notes	Lower Frequency	Upper Frequency	Power Output	Tolerance	Emission Designator	Microprocessor Number
1	1	9	EF	470	520	4	2.5 ppm	16K0F3E
1	2	9	EF	470	520	4	2.5 ppm	11K0F3E
1	3	9	EF	470	520	1	2.5 ppm	16K0F3E
1	4	9	EF	470	520	1	2.5 ppm	11K0F3E

some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details