Intended use The devices which constitute this RF remote control switch set are intended only for personal use in closed dry rooms. They are not suitable for commercial use. The RF remote control switch set is used for switching lamps and electrical appliances on and off. The devices may only be operated individually. Do not plug multiple socket switches into each other. Any other use is considered non-intended use, The manufac-
turer assumes no liability for damage caused by non-intended use. Operating manual Read this operating manual through thoroughly before using the device. Keep the operating manual in a safe place. Should you pass on this device to another party be sure to include the operating manual, Basic safety instructions
+ Children are not aware of the dangers that may arse from im-
proper handling of electrical devices. Never allow children to use electrical devices without supervision. Risk of suffocation! Do not leave the packaging material lying around. Children could swallow the small parts and choke on them. Plug the socket switches into conventional 220-240VACISOHz two-pin earthed sockets only. Do not connect the socket switches to extension cables, Only connect consumers which do not exceed the perform-
ance limits of the socket switches. Do not connect consumers (for example irons) which could cause fire or other damage if they are accidentally switched on. Do not connect consumers (for example refrigerators) which Tequire condenser motors,
. ce Do not cover the socket switches. Heat builds up under the cover. This poses a fire hazard.
+ Regularly check the devices for damage. Do not replace dam-
aged parts. Contact the manufacturer or dispose of the devic-
es in an environmentally friendly manner.
* Do not touch the devices with wet hands.
* To de-energise the socket switches disconnect them from the mains supply. Batteries must be handled with particular care.
+ Risk of explosion! Do not try to recharge non-rechargeable batteries When the batteries are used up remove them from the battery compartment and dispose of them in an environmentally friendly manner.
* Do not throw batteries into fires and never subject them to high temperatures. Do not open or short-circuit batteries
* Battery acid which leaks from a battery can cause skin inrita-
tions. In case of contact with skin rinse with plenty of water. Do not rub your eyes if any liquid gets in them; rinse them thoroughly with water and contact a doctor immediately.
* If you are not using the batteries remove them to avoid dis-
charging. Batteries do not belong in the household rubbish, They may contain poisonous heavy metals and must be treated as hazardous waste, For this reason, take used batteries to a local collection point. Gn DEVICE Scope of delivery:
The following items are included in the scope of delivery:
remote control with battery three socket switches Device overview 12 56
.) ae = ye - y 9 | e 7 On OF |
fd UL p48
Socket switch Childproof two-pin earthed socket Two-pin earthed plug Function indicator light Remote control new 6
& Function indicator light 7 OFF keys (A, B, C, D) Battery compartment cover 9 ON keys (A. B.C. D) ce Preparations Before you can use the devices you must:
insert the battery, synchronise the system code between the remote control and the socket switches and assign an ON/OFF key pair on the remote control to a socket switch Inserting the battery Model No.:
Receiver:
55001USAX18. 55002USAX18. 55003USAX18. 55005USAX18. 55006USAX18. 55007USAX18. 55008USAX18. 55009USAX18. 55010USAX18 Transmitter:
50027. 50028. 50029.
CLEANING Never use aggressive or abrasive cleaning agents for cleaning Clean the device with a soft damp cloth and a mild cleaning agent. Ensure that the device is completely dry before using it again MAINTENANCE Check the baltery regularly for damage. TECHNICAL DATA Operating voltage +120 VAC 60 Hz Socket switch switching power max. 1800 W(15A) Resistive or tungsten Radio signal range = max. 25m Operating frequency 433.92 MHz Ambient temperature 0C to 35C Storage temperature -40C to 70C Battery 12 V, typeA 23 This device complies with Part 15 of the FCC Rules. Operation is subject fo the following two conditions: (1) this device may not cause harmful
(2) this device must received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could vold the user's authority io operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in This generat uses and can radiate radio frequency energy and, If not installed and usedin with iy harmful to radio communications. However, there is no guarantee that interference willnotoccur ina particular installation, Hf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the useris encouraged fo try te correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver, Connect the equipment into an outlet on a circuit different from that towhich the receiver is connected. Consult the dealer or an experinnced radiol/TV technician for help.