FCC ID: 2ATYD-1100 Kano PC

K C K C O O O O L LL r e t u p m o C l a n o s r e P a e k a m o t w o H SAFETY FIRST For your safety, and to avoid damaging your computer, make sure you read all the instructions before you begin. Never touch the heat sink because it can get hot!

Only use the battery and power supply unit that come with this computer. Using a different battery or power supply unit can cause a fire or damage the computer!

Don't charge your computer near anything that can burn, or when no one else is home!

Do not remove or tamper with the PCB If you think your Kano PC might be damaged, stop using it, and visit the Kano help desk at help.kano.me If you see a comment in red that looks like this, it means you have to pay attention! Follow the instructions to avoid getting hurt, or damaging your computer Now let's begin!

Kano-PC-Book-EN-20191011.indd 1 14/10/2019 12:33 Take out the pieces!

Screen + Printed Circuit Board 1 14/10/2019 12:35 Kano-PC-Book-EN-20191011.indd 1 Keyboard + Sleeve Case 2 Power Supply Unit Battery Power Cable Speaker Magnifying Glass LOOK C LOOK C L LOSE LOSE L LYLYL 3 Pick up the touch screen 4 The front has over 1,000,000 pixels!

Lay it screen-down onto the black foam sheet The back has a Printed Circuit Board, or PCB 5 to have a peek inside 6 Headphone Jack Power Socket Power Sound USB Processor Graphics Chip HDMI Y L E S O L K C O O L 7 This part is called a heat sink POWER MANAGEMENT UNIT CAUTION: HOT PROCESSOR 8 It protects 2 very important chips from over-heating Kano-PC-Book-EN-20191011.indd 8 14/10/2019 12:36 Be sure not to touch this as it can get hot!

Pages 22 & 23 Kano-PC-Book-EN-20191011.indd 9 PROCESSOR CAUTION: HOT POWER MANAGEMENT UNIT 9 14/10/2019 12:36 How does your computer think?

10 Inside are billions of electric switches If a switch is on, that means 1. If it's o, that means 0 1 1 1 1 1 0 1 1 0 0 0 0 1 1 1 0 0 Your computer turns specic sequences of 0s and 1s -

called binary code - into words, pictures, and logical rules 11 Lets give your computer some power Don't power your PC with anything else!

It may cause personal injury, or damage to your unit - or both 12 Take the battery, and push it onto the screen Kano-PC-Book-EN-20191011.indd 12 14/10/2019 12:37 Plug in the red cable, the battery LED will come on It's alive!

Electricity is now owing from the battery into your computer!

13 Time to give your computer a voice Pages 22 & 23 14 Grab the speaker, and push it onto the screen On the outside we can see a black membrane Sound waves Cone vibrates to make sound Magnet & Coil Sound is simply your ears detecting vibrations in the air M a g n et & C oil but inside is a magnet, and space for air 15 Plug in the audio cable 16 The light will come on to show it's connected The cable sends signals to your speaker and they vibrate the magnet, membrane, and the air inside 17 Pick up the clear case The small holes let the sound from the speaker out 18 Hold it above the screen Line up the grooves and push the edges into place click!

Make sure the case is snug and secure click!

19 You need a way to control your computer 20 Flatten out the keyboard See the pins? They draw electricity from your computer to power the keyboard They are called Pogo Pins, because they move up and down like pogo sticks!

and send your commands from the keyboard to your computer 21 Place your computer onto the Pogo Pins 22 Can you feel the magnetic pull?

Hold the screen in place Dont let go!

then lift the back of the keyboard 23 Slot the orange piece into the groove in the clear case It will stay in place with the power of magnets 24 Congratulations! You've built your computer Whoop!

25 Now it's time to turn it on Press this for 3 seconds!

Open the start menu and click on How Computers Work 27 How Computers Work Look inside your computer, see how it works. Make emojis with binary code, tinker with touch and sound, play with the processor, and more 28 Kano-PC-Book-EN-20191011.indd 28 14/10/2019 12:37 Kano Code Make, learn, and play with technology. Level up and unlock coding powers. Share your creations with the world When | is pressed Create cube Position 0 0 0 Size 6 29 Make Art Learn to draw beautiful images with code 30 Microsoft Store Download more fun and creative Windows apps for your computer from the store 31 Cool Things To Do Hair Color 32 Create a custom Kano avatar Ask Cortana a question Make a 3D shape in Paint3D Put stickers on the case Change wallpaper Kano-PC-Book-EN-20191011.indd 33 33 14/10/2019 12:38 Hey Cortana T O P TIPS 11 F OR YO U R P C The white LED lights will tell you when your keyboard is connected and the caps lock is on 35 T O P TIPS 22 F OR YO U R P C Battery power low? Charge your computer with the red PSU and the red charging cable. PSU stands for Power Supply Unit Don't power your PC with anything else!

It may cause personal injury, or damage to your unit - or both 36 Kano-PC-Book-EN-20191011.indd 36 14/10/2019 12:38 the other end into your computer You can remove the touchscreen to use it without the keyboard T O P TIPS 33 F OR YO U R P C 38 Oh, and it ips Wheeeee!

39 T O P TIPS 44 F ORYO U R To carry your computer, lift up the keyboard P C 40 Unfold the back stand, and cover your computer Don't forget the elastic band!

41 T O P TIPS 55 F ORYO U R P C ctrl ctrl COPY Copy C Cut X Your keyboard has hidden powers PASTE Paste V Undo Z ctrl ctrl Close W New N CLOSE ctrl ctrl CUT UNDO NEW 42 Something not working? Get help fast at help.kano.me Use these help codes Computer start-up issues Wi-Fi troubleshooting Keyboard troubleshooting Warranty and replacement parts KPC2 KPC3 KPC4 KPC5 44 Kano-PC-Book-EN-20191011.indd 44 14/10/2019 12:43 Need help?

help.kano.me Help with anything from kits to coding Kano-PC-Book-EN-20191011.indd 45 45 14/10/2019 12:43 Have you played our other kits?

Levitate the feather On Wand Up Anle Feather to Roll Harry Potter Coding Kit Build a wand. Learn to code. Make magic 46 Pixel Kit Learn to code with light Motion Sensor Kit Learn to code with movement Kano-PC-Book-EN-20191011.indd 47 47 14/10/2019 12:43 Y L E S O L K C O O L Y o y s t b u il t e j u u v r o w n P C . u o y t a a N o w w h r o c g t o i n u g r e o e a

e t I C O P Y R G H T K A N O C O M P U T N G L T D 2 0 1 9 I

. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The devic e can be used in portable exposure condition without restriction SAR Statement:

This device has been tested and meets applicable limits for radio frequency (RF) exposure. Specific Absorption Rate (SAR) refers to the rate at which the body and head absorbs RF energy. The SAR limit is 1.6 watts per kilogram in USA that set the limit averaged over 1 gram of tissue. This device

(FCC ID:2ATYD-1100, ) has been tested against this SAR limit. During testing, the device radios are set to their highest transmission levels and placed in positions that simulate uses against the body and head, with no separation, the highest SAR value reported is 0.276 W / kg. SAR information on this can be viewed on-line at https://www.fcc.gov/oet/ea/fccid. Please use the device FCC ID number for search. Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified. IC Caution:

English:

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas licence-

exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device. French:

Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1. Lappareil ne doit pas produire de brouillage;

2. Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. SAR Statement: This device has been tested and meets applicable limits for radio frequency (RF) exposure. the test distance of the device is 0mm.Specific Absorption Rate (SAR) refers to the rate at which the body and head absorbs RF energy. The SAR limit is 1.6watts per kilogram in Canada that set the limit averaged over 1 gram of tissue. This device (IC:25240-1100) has been tested against this SAR limit. During testing,the device radios are set to their highest transmission levels and placed in positions that simulate uses against the body and head, with no separation, the highest SAR value reported is 0.276 W / kg.Cases with metal parts may change the RF performance of the device, including its compliance with RF exposure guidelines, in a manner that has not been tested or certified.

Kano Computing Limited Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2019/12/20 Subject; Request for Confidentiality FCC ID: 2ATYD-1100 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Jingjing Li Title: Manager

Kano Computing Limited Date: Dec. 20, 2019 FCC ID: 2ATYD-1100 Model Number: 1100, 1100-01, 1100B-02, 1100-03, 1100-04 To:

Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Kano Computing Limited declare that this EUT (FCC ID: 2ATYD-1100) will conduct FCC compliance testing, the SDOC part recognized test lab(Shenzhen NTEK Testing Technology Co., Ltd.( ShenZhen Lab.). 1/F, Building E, Fenda Science Park, Sanwei Community,Xixiang Street Baoan District, Shenzhen 518126 P.R. China) Please contact me if you have any question. Sincerely,

(Signed) Name / Title: Jingjing Li / Manager Company: Kano Computing Limited Address: 3 Finsbury Ave London EC2M 2PA London, United Kingdom

Kano Computing Limited Letter of Authorization Company: Kano Computing Limited Address: 3 Finsbury Ave London EC2M 2PA London, United Kingdom Product Name: Kano PC Model Number: 1100, 1100-01, 1100B-02, 1100-03, 1100-04 FCC Identifier: 2ATYD-1100 We authorize MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the above named equipment. Any individual within MiCOM Labs is authorized to act on our behalf and take action on the application. We declare that MiCOM Labs Inc, 575 Boulder Court, Pleasanton, California 94566, USA, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Name: Jingjing Li Title: Manager Signature of applicant:

Date: Dec. 20.2019

Kano Computing Limited Family models declaration letter. 2019-12-20 We Kano Computing Limited Of 3 Finsbury Ave London EC2M 2PA London, United Kingdom Product:

Kano PC FCC ID: 2ATYD-1100 Model Name: 1100, 1100-01, 1100B-02, 1100-03, 1100-04 Trade mark: KANO All models are the same circuit and RF module,except the model name, appearance and color. Thanks Sincerely, Signature 2019-12-20 Jingjing Li E-mail:

Phone:

Fax:

Address:

371469114@qq.com

+44(0)20 36597372

+44(0)20 36597372 3 Finsbury Ave London EC2M 2PA London, United Kingdom