FCC ID: 2AXCW-AP6700 WiFi SMART MESH

 

Size: 105 x148mm

Black 1c printing

AR1344P Wi-Fi Extender

Technical Specifications

Wireless Characteristics

- 4x4 5GHz 802.11ax

- 2x2 2.4GHz 802.11ax

- 4 Spatial Streams

- Wave 2 (MU-MIMO)

- Beamforming

- High-power transmit for maximum coverage

5GHz Wireless Operating Channels

- 5.15-5.35 GHz, 5.470-5.725 GHz-5.850 GHz

- 20, 40, 80 and 160 MHz bandwidths supported

Wireless Security

- WPA2 / WPA

- Push-button :

Wireless setup (Mesh / WPS) and Reset support

Memory

- 256MB Flash and 512MB SDRAM

Antenna

- Four (4) high performance internal antennas

Ports

- Two (2) RJ45 Gigabit Ethernet

(10/100/1000Mbps) WAN/LAN ports

<FCC User manual Statements>

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including

interference that may cause undesired operation.

FCC Part 15.105 statement

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

LEDs

- Five (5) LEDs

: Power, WAN, LAN, 2.4G, 5G, WPS

Management

- TR-069 management client

- Local web access

- Mobile application support (optional)

Operating Environment

- Operating temperature 0º to + 40ºC

- Relative humidity 8% to 95%;

Non-condensing

Regulatory Certification

- Wi-Fi Alliance®

- CE

- RoHS

- WEEE

Physical Specifications

- Dimensions : 130 x 130 x 54 mm (W x H x D)

Accessories

- One (1) 12V/1.5A power adapter

- One (1) Ethernet cable

- Quick start guide

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

FCC Part 15.21 statement

Any changes or modifications not expressly approved by the party

responsible for compliance

could void the user's authority to operate this equipment.

RF Exposure Statement (MPE)

The antenna(s) must be installed such that a minimum separation distance of

at least 20 cm is maintained between the radiator (antenna) and all persons

at all times. This device must not be co-located or operating in conjunction

with any other antenna or transmitter.

KAON BROADBAND Co., Ltd. KAONMEDIA Building, 884-3, Seongnam-daero, Bundang-gu, Seongnam-si, Gyeonggi-do, 13517, South Korea

© 2020 KAON BROADBAND Co., Ltd. KAON BROADBAND and the KAON BROADBAND Logo are trademarks of KAON BROADBAND Co., Ltd. Other

brands are trademarks or registered trademarks of their respective holders.

This document is for informational purposes only. Information and views expressed in this document may change without notice. For technical

support and other information, please contact your sales representative or contact us by email.

www.kaonbroadband.pl * sales_team@kaonbroadband.pl * support@kaonbroadband.pl

AR1344P

Quick Installation Guide

1. AR1344P overview

1

4

5

2

3

7

6

1

2

3

LED (Power, WAN, LAN, 2.4G, 5G, WPS)

LAN2

LAN1/WAN

4

5

6

7

WPS Button

Factory Reset Button (press 5~6 seconds)

Power Connector

Power On/Off Switch

LED Scenario

The light on the front side of your AR1344P gives you information about the AR1344P’s operation.

LED

COLOR

Blinking

Solid

Off

PWR

Green

WAN

Green

The LAN1/WAN port is

sending

or receiving data

LAN

Green

The LAN2 port is sending

or receiving data

2G

5G

WPS

Green

Green

Blue

Green

The route is sending

or receiving Wi-Fi traffic

The route is sending

or receiving Wi-Fi traffic

Smart connecting

or mesh grouping

Smart connecting

or mesh grouping

AP router is ready

A power - on device

is connected to

the LAN1/WAN port

A power -on device

is connected to

the LAN2 port

The 2.4GHz radio

is operating

The 5GHz radio

is operating

Master mode

Mesh

Network Service

Slave mode

Mesh

Network Service

O

O

O

O

O

O

- 1 -

Power is not supplied

to the router

No device is connected

to this LAN1/WAN port

No device is connected

to this LAN2 port

The 2.4GHz radio is off

The 5GHz radio is off

Mesh X

Network Service X

Mesh X

Network Service X

AR1344P Wi-Fi Extender

AR1344P Wi-Fi Extender

3. Quick Mesh Setup: Option #2 → Mobile App

Step 1. Download the Kaon Wi-Fi App

Scan the unique QR code below, or go to Google Play or the Apple App Store to download the Kaon WiFi app.

Install the app on a compatible iPhone or Android smartphone.

AR1344P Master

3

Lagacy GW

6

1

AR1344P lave

5

7

2

4

2. Quick Mesh Setup : Option #1 → WPS

To set up AR1344P Master and Slaves:

Step 1.

Connect your legacy GW to the LAN1/WAN port on your AR1344P using the included

Ethernet cable.

Step 2.

Connect your AR1344P(Master) to a power source.(cid:31)

Note: If the Power LED on the front of AR1344P does not light, press the Power On/Off switch.

Step 3.

Wait for the AR1344P master’s Power LED to light solid green and the 2.4G and 5G LED

lights solid green.

Step 4.

Place the AR1344P slave about 3 meters from the AR1344P master. Connect the AR1344P

slave to a power source.

Step 5.

Wait for the AR1344P slave's power LED to light solid green and the 2.4G and 5G LED

lights solid green.

Step 6.

Press the WPS button on AR1344P master for 3 seconds.(Do not press the WPS button

on AR1344P Slaves)

Step 7.

Wait for about 3-4 minutes until mesh pairing is complete and the AR1344P slave's WPS LED

turns solid green.

Step 8.

Place your mesh extender(s) in the desired location(s) in the household and ensure that

the Signal LED stays solid green.

Note: You’ll get the best signal when it is in an open space like on a shelf or a table.

Follow the step-by-step instructions on the App to connect your home gateway to the AR1344P unit.

Step 2.

Launch the Wi-Fi app. Select Set up manually

Step 3.

Go to Wi-Fi settings to connect to your network (AR1344P Wi-Fi Network)

Step 4.

Tap Find my device, enter your login information printed on a label on the bottom of the AR1344P

and tap Login. You can see the dash board of the app after you successfully set up your Wi-Fi

network.

Step 5.

Add AR1344P to an existing Wi-Fi network, tap icon on the top right hand corner of the dashboard.

Tap to add new AR1344P and scan QR code printed on a label on the bottom of the AR1344P,

then tap Create Mesh.

Step 6.

Customize the network name and password.

Tap icon on the top right hand corner of the dashboard, and select the Wi-Fi settings to create your

own network name (SSID) and password.

Note: If your device disconnects from the Wi-Fi network, view the available Wi-Fi network and then

choose the new network name (SSID) and enter the new password.

4. Accessing your AR1344P from WebUI

Step 1. Access the web-based setup page

a.

b.

c.

d.

e.

Connect your PC to the working AR1344P (master mode)’s wireless network (SSID).

WebUI address, ID and the password are located at the label at the bottom of your device.

Launch a web browser (Internet Explorer or Chrome).

Enter http://192.168.1.1 or http://kaonmesh_[][][][] ([][][][] is the last 4 digits of the working AR1344P’s serial

number) in the address bar, then press.

Enter the default user name, “admin” and “password”, password in the fields.

Note : You can view and change your Wi-Fi name (SSID) and password, and see all your AR1344P configured

as a mesh network (master and slave mode) in your Wi-Fi.

- 2 -

- 3 -



 

 

 

 

 

 

 

 

 

 

2AXCW-AP6700 Label Positon AR1344P EVO6700AP Rubber Foot Matt Glossy LABEL 60mmX30mm Label area AR1344 AR1344E Size 130mm x 130mm x 54(7.2)mm Designed by KAON MEDIA Design Team

 

 

CONFIDENTIALITY REQUEST

Federal Communication Commission

Equipment Authorization Division, Application Processing Branch

7435 Oakland Mills Road

Columbia, MD 21048

27th, July 2021

TO WHOM IT MAY CONCERN

Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the

Freedom of Information Act, Kaonbroadband CO., LTD. requests confidentiality for the following products:

FCC ID Number Product

2AXCW-AP6700

Title/Model

AR1344P, AR1344, AR1344E, EVO6700AP

The following exhibits contain trade secrets and proprietary information that could be of benefit to our competitors

regarding the design of our product. This material is not customarily available to the general public and we request

that it be withheld from public inspection. We request that the following information submitted be held permanent

confidential treatment.

Permanent Confidential Request

-

-

-

-

Schematics

Block diagram

Part List

Operational description

If you have any questions, please feel free to contact me at the address shown below.

Best regards,

Name: Kyu Sang Ryu

Title: Manager

E-mail: crispy7a@kaonbroadband.com

Company name: Kaonbroadband CO., LTD.



 

 

Declaration Letter

(Theory of slave operation in DFS band) FCC ID: 2AXCW-AP6700 Model: AR1344P, EVO6700AP, AR1344, AR1344E Applicant : Kaonbroadband CO., LTD Dear Examiner, configuration. with Part 15.407(h)(2). This device operate as a master in AP mode and can operate as a slave for mesh network In slave operation with mash network configuration, I attest the certified device is in compliance Name: Kyu Sang Ryu Title: Manager Company name: Kaonbroadband CO., LTD.

 

 

Date: 27th of July, 2021

Federal Communications Commission

7435 Oakland Mills Road

Columbia MD 21046

c.c.

UL Verification Services Inc. (formerly UL CCS)

Certification Division

47173 Benicia Street

Fremont, CA 94538, USA

To whom it may concern:

I, the undersigned, hereby authorize UL-Korea and hereafter referred to as ULK, to act on our

behalf in all manners relating to application for equipment authorization, including signing of all

documents relating to these matters. Any and all acts carried out by UL-Korea on our behalf shall

have the same effect as acts of our own.

I, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that

includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.

853(a).

In authorizing ULK as our agent, we still recognize that we are responsible to:

comply with the relevant provisions of the certification program;

a)

b)

c)

d)

e)

make all necessary arrangements for the conduct of the evaluation, including

provision for examining documentation and access to all areas, records (including

internal audit reports) and personnel for the purposes of evaluation (e.g. testing,

inspection, assessment, surveillance, reassessment) and resolution of complaints;

make claims regarding certification only in respect of the scope for which

certification has been granted;

do not use our product certification in such a manner as to bring the Certification

Division into disrepute and not make any statement regarding our product

certification which the Certification Division may consider misleading or

unauthorized;

upon suspension or cancellation of certification, discontinue use of all advertising

matter that contains any reference thereto and return any certification documents

as required by the Certification Division;

f)

g)

h)

i)

j)

use certification only to indicate the products are certified as being in conformity

with specified standards;

endeavor to ensure that no certificate or report nor any part thereof is used in a

misleading manner;

ensure that any reference to our product certification in communication media

such as documents, brochures or advertising, complies with the requirements of

the Certification Division;

keep a record of all complaints made known to the us relating to the product’s

compliance with requirements of the relevant standard and to make these records

available to the Certification Division when requested;

take appropriate action with respect to such complaints and any deficiencies

found in products or services that affect compliance with the requirements for

certification;

k)

document the actions taken.

This authorization is valid until further written notice from the applicant.

Sincerely Yours,

Name: Kyu Sang Ryu

Title: Manager

E-mail: crispy7a@kaonbroadband.com

Company name: Kaonbroadband CO., LTD..

REMARK:

1.

2.

3.

This authorization letter will be sent along with your application when filing with the

Certification Division.

Please follow the format and type it on company letterhead and send original to us.

Authorized signature must be in agreement with grantee code contact in FCC database.



 

 

ID Letter (Model difference) FCC ID: 2AXCW-AP6700 Model: AR1344P, EVO6700AP, AR1344, AR1344E AR1344P, EVO6700AP, AR1344, AR1344E has the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical. The difference only the model name and Memory size. The difference does not affect RF function. Model Difference in Model Name as Below AR1344P, EVO6700AP AR1344, AR1344E 258MB/512MB (FLASH MEMORY / SDRAM) 128MB/256MB (FLASH MEMORY / SDRAM) There are no differences in RF performance and characteristics between all models. Name : Kyu Sang Ryu Title : Manager Company Name : Kaonbroadband CO., LTD.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

WIFI Channel 12 and 13 Declaration Letter WiFi Channel 12&13 Declaration Letter Page 1 of 2 WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2AXCW-AP6700 Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Signature:

Name: Kyu Sang Ryu Title: Manager Company name: Kaon Broadband CO., LTD. WiFi Channel 12&13 Declaration Letter Page 2 of 2