| all | frequencies |
|
exhibits | applications |
|---|---|---|---|---|
| manual |
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
Manual | Users Manual | 2.24 MiB | December 03 2009 | |||
| 1 | Cover Letter(s) | December 03 2009 | ||||||
| 1 | Cover Letter(s) | December 03 2009 | ||||||
| 1 | External Photos | December 03 2009 | ||||||
| 1 | Internal Photos | December 03 2009 | ||||||
| 1 | ID Label/Location Info | December 03 2009 | ||||||
| 1 | Operational Description | December 03 2009 | ||||||
| 1 | Test Report | December 03 2009 | ||||||
| 1 | Test Setup Photos | December 03 2009 |
| 1 | Manual | Users Manual | 2.24 MiB | December 03 2009 |
User Guide Advanced High-Definition Personal Video Recorder STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 1 2009-03-13 10:48:02 Evolution - Ideas to Solutions for a Digital World Information to the user NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. CAUTION :
Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 2009 Evolution Digital, LLC. All Rights Reserved. STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 2 2009-03-13 10:48:04 Chapter 1 - Introduction Introduction Thank you for choosing the Evolution DMS-2042-HD-PVR Advanced High-Definition Personal Video Recorder (PVR). The Evolution DMS-2042-HD-PVR will allow you to enjoy viewing HDTV with easy-to-use on-screen menus and navigation. The PVR functionality makes sure you never miss your favorite shows with record, pause and rewind functionality.
This User Guide includes the following sections to get you started using Evolutions Advanced HD PVR:
IMPORTANT SAFETY INFORMATION GETTING TO KNOW YOUR REMOTE CONTROL QUICK TIPS PROGRAM GUIDE PARENTAL CONTROL FAVORITES ADDITIONAL CHANNEL EDITING FEATURES PERSONAL VIDEO RECORDER SYSTEM SETTINGS CABLE CONNECTIONS GETTING TO KNOW YOUR HD PVR FAQs GLOSSARY OF TERMS 2 4 6 12 13 14 15 16 20 22 25 28 30 01 Quick Tip Read this manual thoroughly and retain it for future refer-
ence to optimize your view-
ing pleasure. The Evolution Advanced HD PVR is full of features to expand your HDTV capabilities. Enjoy a wall mounted install with your flatscreen or the standard table top install. STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 3 2009-03-13 10:48:04
Important Safety Information
Read this manual carefully before using the product. Use only as instructed. The cautions described contain important information about safety, and are categorized into: Danger, Warning and Notice. The company will not take any responsibility for accidents or damage result-
ing from careless handling by the user. Danger If the user mishandles the product, there is a risk of loss of life or critical injury.
Connect the power cord only to A/C outlets as specified by the user manual or product specification. If the power cord is connected to a non-specified A/C outlet, it could result in fire or electric shock.
The product must not be exposed to water or liquid of any sort, or be exposed to drips or splashes. It could result in fire or electric shock.
Do not place heavy objects, including the product itself, on top of the power cord. If it is damaged, it could result in fire or electric shock.
Do not place metal objects on top of the apparatus. If metal objects fall into the apparatus, it could result in fire or electric shock.
Do not repair, disassemble or modify this apparatus your self. It might cause fire or electric shock. If internal checking or maintenance is needed, please contact your service center or agency.
Do not block or cover any ventilation opening. A fire might result from overheating.
Turn off and unplug the power as quickly as possible during electric storms. Failure to do so could result in fire or electric shock.
Remove the antennas power plug from the outlet as quickly as possible during electric storms. Failure to do so could result in fire or electric shock.
Do not drop the apparatus (for example by putting it in a place where it may fall) or subject it to impact. The product might be damaged. If it is damaged, please turn off the power and remove the plug from the power outlet, or fire or electric shock may result.
Never touch the power cord with wet hands. It could result in an electric shock.
STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 4 2009-03-13 10:48:05
Important Safety Information
The DMS-2042-HD-PVR is provided with a DC 14V IN AC Power Supply. It has been designed to meet the require-
ments of the DMS-2042-HD-
PVR. No other power supply should be used with this set-
top box unless provided by your cable provider.
Do not place or keep the apparatus in the following situations. Doing so might cause problems.
- where it is too hot or cold.
- where there is high humidity.
- where there are excessive temperatures, for example in front of airconditioners or heating vents.
- where there is dust or soot.
- in confined areas where the heat cannot be released.
- where it is exposed to direct sunlight.
Turn the apparatus off or unplug the power cord if it is to remain unused for a long period of time.
Do not place heavy objects on top of this apparatus. It might cause malfunction or damage.
If the apparatus is so seriously damaged that it cannot be repaired, or has stopped working altogether, dispose of it properly in accordance with the local laws or regulations in your area. Warning If the product is mishandled, the user might receive a serious or minor injury. Damage or loss to the users property might also result.
The product must not be exposed to water or liquid. If the apparatus is exposed to drips or splashes, it might cause a problem that cannot be repaired.
Do not repair, disassemble or modify this apparatus yourself. It might be seriously damaged, possibly beyond repair.
Turn off the power and unplug the power cord as quickly as possible during electric storms. They might damage the apparatus.
Remove the antennas power plug from the outlet as quickly as possible during electric storms, or the apparatus might be damaged. Notice If the product is mishandled, it might cause minor damage.
If the apparatus becomes marked, clean it gently with a soft cloth or towel. Never use chemical solvents such as benzene, thinner, acetone or other solvents. The surface of the apparatus might become discolored and the paint might peel. 03 STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 5 2009-03-13 10:48:06
1. Press and hold OK + MENU buttons for 3 seconds until red LED button on remote turns on. 2. Enter 3 digit code using number pad.*
3. Press OK. Remote LED blinks indicating code accepted. Note: If the code is not ac-
cepted return to step 2 and enter the next 3 digit code listed for the TV.
*Refer to separate Code Sheet supplied with the remote control. Chapter 3 - Getting to Know Your Remote Control The Left Side
Stop Record Pause Rewind Fast-
Forward Play
Display Recorded Program Progress
Display List of Recorded Programs
Jump back and replay a scene.
Jump forward and skip commercials. Power Turn on or off the HD Set-Top Box TV Standby Turn your TV on or off C.C. Closed Captioning TV/STB Press to switch between TV and Set-Top Box mode P-Rate To set or view Parental Rating Locks TV/Radio Toggle between TV & Audio channels Note: Audio channels may not be available in all areas Guide Press to enter or exit the electronic program guide Arrows Navigation through various menus and screens Menu Enter or exit the main menu Red Button Multifunction Key Green Sort Button To sort the channel listings
STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 6 2009-03-13 10:48:10 Chapter 3 - Getting to Know Your Remote Control The Right Side LED Indicator TV Input This selects available inputs Audio Press to select the sound mode (Mono, Left, Right, Stereo) Last Return to the previous channel or screen Sleep Select a time interval (10 Min., 30 Min. etc.) for automatic shut off Mute To turn sound on/off OK Press to quickly view the Channel Listing by channel number. To conrm your choice of channel selection through the guide or direct entry. Exit Press at any time to return to watching TV Blue Button Multifunction Keys Info Button - View the description of the current or highlighted Program while watching TV, if available. Scroll while in Program Guide Rename Favorite List while editing Channel List. Yellow Button Multifunction Keys Rename Channels while browsing Channel Listings
When inserting batteries, make sure that the polarity
(+/-) is correct.
The Red LED on the top right of the remote is a visual Indicator that confirms the re-
mote has power when a but-
ton is pressed.
Your remote may vary slightly from the one pictured here. However, basic functions should remain the same. STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 7 2009-03-13 10:48:10
Press the MENU button on your remote to access all your favorite digital cable features. Press TV/Standby to turn on your TV. PVR Personal Video Recorder PROGRAM GUIDE View current program listings SYSTEM SETTINGS Language, AV Settings (HDTV), On-screen display (OSD) and more. Press Power to turn on the HD Set-Top Box.
Use the arrow keys to navigate through the menu, program guide and channel listings. Press to select OK CA SYSTEM For authorized technicians only. EDIT CHANNEL LIST Create Favorites, Parental Lock, Skip and Delete channels INSTALLATION For authorized technicians only. OK
Press the OK button to view a quick list of channels in numerical order with the ability to sort the channel line-up. STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 8 2009-03-13 10:48:11
INFO GUIDE
Quick Tips
Press the INFO button to view on-screen program information.
The Info bar will display the channel, title, rating, brief description and a progress bar, if available.
Press the INFO button a second time to view the full program description.
Press the GUIDE button to view the current program listings.
Use your arrow buttons to navigate throughout the Guide.
Select the highlighted program of your choice by pressing OK. The selected program will display in the viewing box within the program guide.
Press EXIT to watch the selected TV program. 07
You can also use the info bar to browse whats on other channels without missing any of your current program.
Arrow to view different channels.
Arrow to see what programs are on next.
Press OK to select a new browsed programs. STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 9 2009-03-13 10:48:12
Quick Tip Make sure to confirm the Parental Control option is enabled:
Press the MENU button on your remote. Select System Settings, Enter your PIN code (default 0000)*.
Lock Control: Press OK, Select Channel Lock ON and press OK.
To restrict viewing based on the TV Program Rating
Press the P-RATE button on your remote.
Enter the PIN code (default 0000)*.
Choose the minimum parental rating you would like viewing restrictions on. For instance, if you choose TV-14, that rating and anything above will be locked. Parental Rating Lock will take effect immediately. MENU
To lock individual channels
Press the MENU button, select the Edit Channel List icon.
Enter your PIN code (default 0000)*.
Select LOCK.
Arrow to the right to identify which channel you would like to lock select OK to add that channel to the lock list.
Press EXIT and confirm your settings.
08 STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 10 2009-03-13 10:48:13 MENU
Quick Tips
Press MENU button.
Select the Edit Channel List icon on the main menu.
Enter the PIN code (default 0000)*.
Scroll to favorites, select OK to expand the list of customizable favorites.
Select a favorite list.
Arrow to the right and individually add channels by pressing OK.
Press EXIT and Save your new favorite list.
Press the Green SORT button.
Use Arrow buttons to highlight favorites.
Arrow to the right to select the Favorite list.
Press OK.
The selected Favorite channel list will display. 09
While setting up your Favorite List,
Press the BLUE button
Keyboard displays, arrows to navigate and OK to select
Press the RED Save button. STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 11 2009-03-13 10:48:13
CHECK YOUR PROGRESS
Press the PROGRESS BAR button on your remote.
The progress bar displays the current play status, the total recorded time and elapsed time.
The hour and minute of the total duration (top) and cursor duration (bottom) will display on the right.
TimeShift Functionality
Press the PAUSE button on your remote to pause live TV.
Note: You must be on the channel you would like to pause for at least 5 seconds before the pause functionality will start to work.
Live TV will pause for approximately 30 minutes before resuming live TV.
Press PLAY at any time to resume. Press the Progress Bar button to view the progress bar at the bottom of the screen.
You can rewind live TV on the channel you are currently watching
Press the REWIND button on your remote to rewind live TV.
The rewind function only applies to the current channel you are viewing. You must be on the channel for at least 5 seconds for the rewind functionality to start to work. You will only be able to rewind for the time you have been on the channel. Please note: While you are in rewind mode, if you switch to another channel, then switch back to the program you have rewinded, the former channel will not save your rewind location but rather return to live TV. We recommend pressing the Record button if you would like to re-access this program later.
10 STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 12 2009-03-13 10:48:14
Quick Tips
While Watching TV
Press the RECORD button.
A notice will appear on the top right side of your screen to indicate the recording has started, this includes the recording time remaining.
Press the RECORD button a second time to edit the settings. While in the Electronic Program Guide (EPG)
Scroll to the channel, date and time of the program you would like to record.
Press the RECORD button, a red icon will appear on the program title.
Press the RECORD button a second time to edit the settings.
Press the RECORDED LIST button to view a list of recorded programs.
Scroll to the recorded program of your choice and press OK. Note:
The Movie Clip image will display for programs not yet watched, recorded programs that have been view will display a screen shot of the program.
Choose to from the start of the program or Continue the program from where it was last stopped watching. 11
Quick Tip To STOP a recording
Press the stop button at any time while recording.
The stop list will display.
Press the up/down buttons to select the program you would like to stop recording, press OK to select.
Press the STOP button to confirm the end of recording. STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 13 2009-03-13 10:48:15
Premium or Pay Per View channels may have a $ sign next to the channel and may not be available for viewing without upgrading your ser-
vice. Please contact your Ser-
vice Provider to discuss your premium channel options. Not all guide information may be available at all times.
Program Guide
The channel list displayed is the currently sorted list
(i.e. favorites)
Viewing Window displays currently selected program
Select a program by pressing the OK button on your remote.
The selected program will display in the Viewing Window.
The Program Information will display the program title, time, rating, and a brief description.
Press EXIT to watch the selected program. View Future Dates
Press the RED date button on your remote to view program listings for future dates.
Highlight the date you would like to view.
Press the RED button on your remote a second time to return to todays date or press EXIT to return to watching TV. Time Scroll to the right to view future program information. Channel Use the arrow buttons to navigate the program guide by channels. Scheduled Program Listings Program Information Available Guide Controls Scroll Program Information Press the BLUE button on your remote to scroll and view the complete program description of the selected program. View Additional Channel Lists and Sort Guide Press the GREEN button to sort the program guide alphabetically
(A-Z or Z-A), with favorite lists, locked channels or numerically. Record Programs listed in the Program Guide
Scroll to the channel, date and time of the program you would like to record.
Press the Record button on your remote, a red record icon will appear.
STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 14 2009-03-13 10:48:16
Parental Control
With Parental Controls you can restrict your children from seeing specifics channels or shows with certain ratings. Channel and Rating restrictions will take effect immediately. The user will be prompted to enter a PIN code for any channel that has been restricted.
To set Parental Controls by restricting individual channels, you must have the Parental Lock function enabled; refer to the side panel to learn how to enable your Parental Lock function.
Press the button, select the Edit Channel List.
Enter your PIN code (default 0000)*.
Select LOCK.
Arrow to the right to identify which channel you would like to lock, select OK to add the channel to the lock list.
Press EXIT and confirm your settings. Quick Tip Confirm the Parental Control option is enabled
Press the MENU button on your remote. Select System Settings, Enter your PIN code.
(default 0000)*
Lock Control: Press OK, Select Channel Lock ON and press OK.
To set Parental Controls by restricting TV Program Rating levels
Press the button on your remote.
Enter the PIN code (default 0000)*.
Choose the minimum parental rating you would like viewing restrictions on, for instance, if you choose TV-14, that rating and anything above will be locked. Parental Rating Lock will take effect immediately. 13
STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 15 2009-03-13 10:48:17 Chapter 7 - Favorites
Press the Green SORT button.
Use Arrow buttons to highlight favorites.
Arrow to the right to select the Favorite list of your choice.
Press OK.
1. Press MENU button. 2. Select Edit Channel List icon on the Main Menu. 3. Enter the PIN code (default 0000)*, if prompted. 4. Highlight favorites, select OK to expand favorite list to display favorite lists. 5. Select a favorite list and press the BLUE button to rename. a. Keyboard displays, use arrows to navigate and OK to select. b. Press the RED Save button. 6. Arrow to the right and individually add channels by pressing OK. 7. Press EXIT and OK to save your new favorite list. Main Menu Edit Channel List Select icon Expand Favorites Press OK to select
STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 16 2009-03-13 10:48:18 Chapter 8 - Additional Channel Editing Features
Caution: All channel deleting will be final. To restore deleted channels you will need to contact your cable provider.
To delete specific channels, press the MENU button, select the Edit Channel List icon.
Enter your PIN code (default 0000)* if prompted.
Highlight and select DELETE, Arrow to the right and individually select channels to delete by pressing OK.
Press EXIT and it will prompt you to save your selection.
Channel skipping only applies if you are currently viewing all channels. The skipped channel will not appear while browsing Channel Listing or viewing the Program Guide.
To skip specific channels, press the MENU button, select Edit Channel List.
Enter your PIN code (default 0000)*, if prompted.
Highlight and select SKIP, Arrow to the right to identify which channel you would like to skip, select OK.
Press EXIT and it will prompt you to save your selection.
your remote to access Closed Captioning.
options: Off, CC1 and CC3. CC1 is he primary closed captioning language. CC3 is the secondary closed captioning language.
option of your choice.
Captioning settings.
STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 17 2009-03-13 10:48:18 Chapter 9 - Personal Video Recorder
Quick Tip
Press Record within the program guide or while watching TV to start record-
ing a program.
While in the Program Guide scroll to the channel, date and time of the program you would like to record.
Press the RECORD button, a red icon will appear on the program title.
Press the RECORD button a second time to edit the settings.
Scroll to the right to select the Reservation mode: Once, Daily or Weekly.
Press the Green RESERVE button to set the reservation.
Press the MENU button on your remote, select the PVR icon.
Scroll to and press OK.
Your program Reservation list will display including the channel, date, time, duration and frequency.
= Daily Recording D
= Weekly Recording 7 To adjust any of your reserved recordings, press the Yellow Edit button. This will allow you to update the duration, frequency, etc.
STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 18 2009-03-13 10:48:19 Chapter 9 - Personal Video Recorder
Evolutions DMS-2042-HD-PVR allows you to record on the spot or set fu-
ture Reservations for programs youd like to record. The PVR will record up
Simply press Record on the program of your choice.
Categorize Your Recordings into Folders.
Press the button on your remote. Once folders are created, highlight a recorded program you would like to move.
Press the Yellow EDIT button, use the arrow buttons to scroll to MOVE, press OK to select.
Select the directories from the list by scrolling up/down, press OK on the directory of your choice. Note: The recorded list will bring up the last directory
(folder) viewed. If you are in a subdirectory (i.e. AV:/
Movies/Dads) press the OK button to change directo-
ries. You must be on the top folder icon to return back to the main directory screen. Quick Tip Press the Recorded List button to view available recorded programs for your viewing pleasure. To a recorded pro-
gram from the Recorded List, press the Yellow Edit button. Scroll to Delete and press OK. CAUTION: Once you press OK, the program will be per-
manently deleted.
Set up Directories to easily navigate through your recorded programs. Create personal folders for favorite recordings
(i.e. Sitcoms, Movies, Kids programs, etc.).
While in the screen, press the Yellow EDIT button to create a New Folder.
Press the Yellow EDIT button a 2nd time to rename.
Type the name of your choice using the arrow buttons. Press OK to select the letters and symbols.
Press the RED button to Save your new directory title. Helpful Tips: While renaming, use the Green Delete button to backspace. Select any blank square to add a space. 17 STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 19 2009-03-13 10:48:20 Chapter 9 - Personal Video Recorder Press the button to jump back and replay a scene. Press the button on the currently playing screen. Quick Tip To change the Instant Replay from 30 seconds, press MENU, PVR, PVR Settings, Press OK, scroll to Instant Replay, press OK and scroll to select the preferred time settings: 10 seconds, 20 seconds, 30 seconds, etc. The progress bar will appear at the bottom. Press and hold the / button to move the location icon to a time point and release the / to play the program from The image in the bottom left of the screen will display how much space is left on your HDD (Hard drive for storage) in percentage. Press the button to jump forward and skip commercials. To change the Commercial Skip default time from 30 seconds, press MENU, PVR, PVR Settings, Press OK, scroll to Commercial Skip, Press OK and scroll to select the preferred time settings. Press the button on your remote while watching a recorded program to display the progress bar. Progress bar displays the current play status, the total recorded time and elapsed time (Hour:Minute). Each time your press the or button, the speed increases (x2, x4, x8, x16, x32, etc.). Press the play button at the desired spot to play. Press the button while watching a recorded program, and press the or button to play back/forward in slow motion. Each time you press the button, the program plays at 2x, 4x, 8x, 16x or 32x speed. Press PLAY to resume at the normal speed. Use BOOKMARKS to search positions quickly and conveniently Press the button on the currently playing screen. Press the RED button at a certain position to set a bookmark Press the GREEN button to display the bookmark list and press the / buttons to select the location you want to view. 18 STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 20 2009-03-13 10:48:20 Chapter 9 - Personal Video Recorder PVR Menu Select PVR in the Main Menu to customize your PVR settings. Change your Instant Replay from 10 to 60 seconds or set a Guard Time to make sure you never miss the crucial 5 minutes at the start or end of your recordings PVR Settings This section is selectable only when no recordings are taking place. To change the default settings, select PVR Setting, arrow over and highlight to the Setting you would like to update and press OK.
Guard Time Start Select from 0 - 30 minutes increments.
Guard Time End Select from 0 - 30 minutes increments.
Default Record Duration Select from 1 to 4 hours increments.
Instant Replay Select from 10 - 60 seconds increments.
Commercial Skip Select from 10 - 60 seconds increments. PVR Menu The PVR Menu allows you to change settings and access reservations and recorded program directories.
File List (Recorded List) View the list of Recorded programs.
Reservation View the list of Reserved recordings.
Format HDD (Selectable only when not recording) For authorized technician use only. Caution: re-formatting the HDD will erase all of the recorded programs on the PVR.
PVR Setting (Selectable only when not recording) Update and view the default PVR Settings. 19 STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 21 2009-03-13 10:48:21 Chapter 10 - System Settings
To access System Settings, press the MENU button. Select System Settings.
To change the language you see highlight Menu Language and arrow over and highlight to the language you want displayed and press OK.
on your remote.
to select from the available 10 minute intervals.
To change the language you hear highlight Audio Language and arrow over and highlight to the language of your choice and press OK. You can set up another language under Audio Language 2. Please Note: The availability of the language in the program information and audio is determined by the broadcaster, when available the PVR will support your selections.
Channel On/Off This allows you to turn on or off the locking feature. Note: When Off is selected this will override the individual channel locks.
Select viewing restrictions based on TV ratings.
On/Off If Menu Lock is enabled this restricts access the Edit Channel List and System Settings. This is important to secure the Lock Control access.
Highlight Change PIN code, press OK to view drop down options.
Enter your current PIN code, enter new PIN code and confirm PIN code.
It will show success if you enter the right PIN code for the confirmation.
STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 22 2009-03-13 10:48:22 Chapter 10 - System Settings
TV Aspect Ratio, Select OK on TV. For HDTV select 16:9, For standard definition select 4:3.
Display Format To change Display Format, highlight the type you want; Auto, Pillar box or Pan & Scan and press OK.
Resolution To change Screen Resolution, highlight the type you want; 1080i, 480p or 720p and press OK.
Menu Transparency To change the menu transparency, highlight the percentage of brightness you desire and press OK.
Banner Time To change the default banner time, highlight the seconds for it to display, press OK.
If available, an alternative audio can be selected
(i.e. English, Spanish, etc.)
Press the AUDIO button on your remote
Arrow to the left or right to select the desired audio setting
(Stereo, Mono, Left, Right).
Press EXIT
STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 23 2009-03-13 10:48:22 Chapter 11 - Cable Connections HDTV Connection Quick Tip You can connect the DMS-
2042-HD-PVR Set-Top Box to the TV in several ways depending upon available TV connections. We have highlighted the three recom-
mended connections. The DMS-2042-HD-PVR comes with Component and Com-
posite Audio/Video cables. HDMI Cable HDMI allows you to take full advantage of the Evolution HD Set-top box high-denition digital features. 1. Connect the RF coaxial cable to the cable wall outlet and the RF IN port on the DMS-2042-HD-PVR. 2. Connect the HDMI cable to the HDMI port on DMS-2042-HD-PVR and the HDMI port on your HDTV. 3. Plug in the power cord to the electrical wall outlet and the DC 12V IN port on the DMS-2042-HD-PVR.
*Note: HDMI cables carry audio and video to the TV. HDMI (IN) To TV To Coaxial Wall Outlet To Electrical Outlet 22 STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 24 2009-03-13 10:48:24 Chapter 11 - Cable Connections HD Video/Analog Audio Connection Component Video/
Composite Audio 1. Connect the RF coaxial cable to the cable wall outlet and the RF IN port on the PVR. 2. Connect the Green, Red and Blue wire connections to the matching color ports on the TV and HD Set-top box. This pro-
vides the video signal. 3. Connect the Red and White wire connections to the match-
ing color ports on the TV and HD Set-top box, leaving the Yellow video cable unplugged. This provides the audio signal. 4. Connect the power cord to the electrical wall outlet and the DC 12V IN port on the PVR. To TV L R AUDIO Y Pb Pr To Coaxial Wall Outlet To Electrical Outlet 23 STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 25 2009-03-13 10:48:24 Chapter 11 - Cable Connections Analog Audio/Video Connection Quick Tip Composite Audio/Video connect your TV. These AV Cables are provided with your DMS-2042-HD-PVR and pro-
vide both audio and video in one cable. Composite Audio/
Video Cable 1. Connect the RF coaxial cable to the cable wall outlet and the RF IN port on the DMS-2042-HD-PVR. 2. Connect the Red, White and Yellow wire connections to the matching color ports on the TV and HD Set-top box. This provides both video and audio signals to your TV. 3. Plug in the power cord to the electrical wall outlet and the DC 12V IN port on your DMS-2042-HD-PVR. To TV VIDEO R AUDIO L To Coaxial Wall Outlet To Electrical Outlet 24 STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 26 2009-03-13 10:48:25 Chapter 12 - Wall Installation Evolutions HD Set-Top box is wall mountable to display nicely underneath
1
W
2
3 A
25 Wall Mounting Accessories
STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 27 2009-03-13 10:48:26 Chapter 12 - Getting to Know Your HD Set-Top Box Front Panel Conditional Access Caution: Please do not plug in the main power supply cord the connections. The Smart Card is inserted by your cable provider. A Smart Card looks similar to a credit card and entitles you to view and listen to all the channels you choose to subscribe to. Do not remove the Smart Card unless instructed to do so by your cable provider. 2 1 3 1. Record LED Indicator and button for Recording a program 2. Stop Stop a Recording 3. Stand by (Power) 4. Back Exit from parameter and cancel selected function. 5. Guide To display the Electronic Program Guide. 9 4 5 6 7 8 6. Channel 10 Channel up/down or select item or sub-menu. 7. OK To select a program, a highlighted line or parameter value. 8. Volume To turn the volume up/down or select a sub-menu item. 9. USB Connects to support devices. 10. Smart Card Slot Smart Card enables service to the HD Set-top box. 26 STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 28 2009-03-13 10:48:27 Chapter 12 - Getting to Know Your HD Set-Top Box Back Panel 4 6 8 9 10 1 2 3 5 7 11 Note The DMS-2042-HD-PVR pro-
output connections including HDMI, Y Pb Pr Component Video and S/PDIF Audio. 1. RF IN Connects to cable signal from your service provider via the cable wall outlet 2. LOOP OUT Connects to TV or VCR 3. ETHERNET Supports PC networking 4. S/PDIF (Coaxial) Provides Dolby Digital 5.1 audio or PCM audio 5. AUDIO OUT (R/L) Connects to audio input of a stereo or TV 6. Component Video (Y Pb Pr) Delivers component video to HDTV 7. HD Audio/Video (HDMI) Connect the HDMI cable to a HDTV to deliver 8. Composite Audio/Video The standard Audio/Video connection 9. RJ45 For future use 10. Display Switch Toggles display between front panel and top panel. Top display would refer to wall mounted Set-top box. 11. Power Supply AC Power from wall into DC 12V IN, provided with the DMS-2042-HD-PVR. 27 STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 29 2009-03-13 10:48:27 Chapter 13 - Frequently Asked Questions
Double check that the power cord is connected to the HD Set-Top Box and the AC wall outlet. If the HD Set Top Box is connected to another unit (such as a switched outlet or DVD player), verify that that unit is powered on.
Press the Power (Stand By) button on the top, front of the HD Set-Top Box instead of the remote control. The batteries in the remote control may be depleted.
Verify that the MUTE button on remote control has not been pressed; try pressing the MUTE button to restore sound. Double check that you television is not currently MUTED.
Double check your audio connections. Refer to the CABLE CONNECTIONS section on pages 22-24 to verify the correct cables are being used for the audio ports. If they match the diagrams, make sure they are firmly connected to the ports on both the TV and HD Set Top Box.
Depending on which channels you are recording, the list of available channels to watch may be limited. Once all record-
ings have decreased to one or none, all channels will become available.
Try another channel, this channel may be restricted from viewing or enter your PIN code (default 0000)*.
Verify that your TV is powered on and press TV/STB to assure the HD Set Top Box is on the correct mode.
Verify that all video cables between the HD Set-Top Box and the TV are firmly connected. Refer to the CABLE CONNEC-
TION section on pages 22-24 for more detailed information regarding the correct connections and alternative video cable options.
If the HD Set-Top Box video output is connected to a home theater unit, verify that the home theater unit is powered on and set to the appropriate input source. Refer to your home theater manual for more detailed instructions.
Some shows start or end a couple of minutes prior to the allocated time slot. Press Menu, PVR, PVR Settings, Guard Time Start or End. This allows you to add a buffer to your programs recordings.
STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 30 2009-03-13 10:48:28 Chapter 13 - Frequently Asked Questions
Verify that there are no obstructions between the re-
mote control and the HD Set-Top Box. Aim the remote control directly at the front panel, not the TV or DVD player. If this still doesnt work, try to stand closer to the HD Set-Top Box, there may be too large a distance between the remote and front panel.
If nothing happens, check the bat-
teries for possible replacement. If the remote still doesnt work, use the front panel of your HD Set-Top Box to press the arrow up button. If the channel changes, then most likely you have a faulty remote that may need to be re-
placed.
Why wont the PVR let me record any more programs?
corded List button and view the icon in the bottom left side of your screen. The PVR contains 250 gigabytes.
double check to make sure you dont already have two pro-
grams being recorded.
Contact your cable provider and they will be able to reset them back to the default 0000 code for you. That will allow you to enter a new PIN code. Refer to page 14 to learn how to change your PIN code.
You can set a lock to restrict viewing based on TV ratings, such as TV-14 or TV-MA, or completely lock out certain chan-
nels.
For more information, refer to the PARENTAL CONTROL section on this manual found on page 13.
To view HD channels from your cable provider in their native resolution, a high-definition capable or ready television is required.
You will also need to use digital cable connections such as the HDMI cable or the Digital Component Video Cables to view HD channels. STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 31 2009-03-13 10:48:28
Glossary of Terms
Personal Video Recorder
Press the Instant Replay button to jump back and replay a scene.
Commercial Skip allows you to jump forward and skip commercials.
The Progress bar displays the current play status, the total recorded time and elapsed time (Hour:Minute).
Hard drive for storage, to format means to permanently erase all your recorded programs, please use this with caution.
The list of recorded programs
Set a to make sure you never miss the crucial 5 or 10 minutes at the start or end of your recordings.
Set up a Reservation to record a future or currently showing program. Select the Reservation frequency:
Once, Daily or Monthly.
Bookmark favorite scenes for fast recall during the playback mode. Recorded items will have no bookmarks, you must add them.
On-Screen Display, change your display settings.
The amount of time the banners and menus display on your screen. 30 STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 32 2009-03-13 10:48:28 STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 33 2009-03-13 10:48:28 DIGITAL
(800) 315-2253 www.evolutionbb.com DMS2042HDPVRREV1 Evolution - Ideas to Solutions for a Digital World STB_Evolution_Cab_110444_KCF-BG3HCOD_Eng(
).indd 34 2009-03-13 10:48:29
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2009-03-12 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2009-03-12
|
||||
| 1 | Applicant's complete, legal business name |
KAONMEDIA Co., Ltd.
|
||||
| 1 | FCC Registration Number (FRN) |
0018127571
|
||||
| 1 | Physical Address |
KAONMEDIA Building, 884-3, Seongnam-daero
|
||||
| 1 |
Seongnam-si, Gyeonggi-do, N/A 13517
|
|||||
| 1 |
South Korea
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
m******@ccsemc.com
|
||||
| 1 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
WQT
|
||||
| 1 | Equipment Product Code |
KCF-BG3HCOD
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
K******** T****
|
||||
| 1 | Title |
Manager
|
||||
| 1 | Telephone Number |
+82-3********
|
||||
| 1 | Fax Number |
+82-3********
|
||||
| 1 |
k******@kaonmedia.com
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Digital Cable Broadcast Receiver | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
CTK Co., Ltd.
|
||||
| 1 | Name |
J******** H******
|
||||
| 1 | Telephone Number |
031-3********
|
||||
| 1 | Fax Number |
031-3********
|
||||
| 1 |
j******@e-ctk.com
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15B | 20 | ||||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC