CG2001-AN22CC CG2001-AN22CC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Caution: Any changes or modications to the equipment not expressly approved by the party responsible for compliance could void users authority to operate the equipment. This appliance and its antenna must not be co-located or operation in conjunction with any other antenna or transmitter. A minimum separation distance of 20 must be maintained between the antenna and the person for this appliance to satisfy the RF exposure requirements. ETH-1~4 RESET RF Power ON/OFF Power 4 RJ45 Ethernet ports to connect your PC or home network devices Switch for factory reset DOCSIS Cable connector Switch for power On/O Connects the unit to DC 12V power 1 2 4 5 6 2.0 Connecting and Installing Devices WPS Long Press The association of the modem with a PC or other equipment Tablet Power Adaptor LED LAN1~4 POWER US DS POWER Status O Flashing On O On O Flashing On O Flashing On O On Indication The LAN port is not connected. The LAN port is sending or receiving data.
(Green : 1Gbps, Amber : 10/100Mbps) The LAN port is connected. The modem is powered o. The modem is powered on. The initialization is not started, or has failed. The modem is upstream ranging. The modem is upstream locked. The initialization is not started, or has failed. The modem is scanning for downstream channel. The modem is downstream locked. The modem is powered o. The modem is powered on. Coax jumper Adaptor SCART RCA A A A B A T T E R Y H D M I i a u d o o u t p u t COMPONENT output Laptop R C A S C A R T A d a p t o r C o a x j u m p e r Coax Cable 1 2 3.0 Quick Guide Instruction for Connection Modem-PC 1. Make sure the following.
- Connect the coaxial cable tightly to the cable outlet.
- Your Cable Modem is powered ON. The power LED will be turned ON.
- Your PC is turned ON and connected to Cable Modem using an Ethernet cable.
- After Online LED is ON, Cable Modem becomes online. 2. Congure your PC to obtain an IP address from a DHCP server. 3. From your PC, start your web browser application like Chrome, Internet Explorer, or etc. 4. Type a valid URL such as www.google.com and <Enter>. The website should be open if connected correctly. Wi-Fi Connection 1. Open Wireless setting window in your Wi-Fi device or PCs. 2. Search for the right SSID. The factory Default setting:
- SSID: CG2001_XXXXXX_G1 for 2.4GHz.
- Note: XXXXXX is character that last 6 characters of Cable Modem MAC Address. WebUI Access Guide To access the conguration web pages, you must do the following :
1. From your PC, start your web browser application like Chrome, Internet Explorer or etc. 2. In the URL address eld, enter IP address 192.168.0.1 and <ENTER>. 3. The log-in window should popped-up after the step 3 above. Then, log-in to the web conguration menu with the following :
- Enter MSO into the User Name eld.
- Enter MSO into the password eld. 4. The main menu will be popped-up like below and you can check or change the current settings from appropriate menus. AAA BATTERY 4.0 Specification Main Chipset Memory Wi-Fi Standards/Tx/Rx Radio Frequency Antenna Type Transmission Rate Max DOCSIS DS/US REAR Front Power Package BCM3383G (500 DMIPS Zephyr, 1600 DMIPS VIPER) 1GHz Full Band Capture DOCSIS3.0 Flash : 16MB SPI (NOR) RAM : 128MB DDR3 802.11 b/g/n, 2Tx2R 802.11 a/n/ac, 3Tx3R 2.4 GHz_BCM43217 Internal Antennas (PCB Type) 2.4GHz : 300Mbps (802.11n 2x2) 8 x 4 Channel Bonding 1 x Cable In 1 x Reset Button 1 x On/Off Button 4 x GbE LAN Ports 1 x WPS Button 9 x LED
(Power, DS, US, Online, Wi-Fi, Eth1, Eth2, Eth3, Eth4) DC 12V (1.5A) Modem with Wi-Fi User Guide (Ukrainian, Russian and English) Ethernet Cable (CAT5/RJ45) Power Supply Reception Sensitivity 2.4GHz 11b 11Mbps : -82dBm 11g 54Mbps : -71dBm 11n HT20: -69dBm (MCS7) 11n HT40: -68dBm (MCS7) 3 4