FCC ID: 2AXFA-SMARTVISION3 4G Phone

Note It is suggested to read the full user guide before using your SmartVision3. An electronic version of this document is available on our website at www.kapsys.com under the Sup-

port section. Box content SmartVision3 is delivered with:

A 220/110 Volts mains charger 5 Volts USB A USB cable (C type) A pair of stereo earphones with microphone 5 NFC tags A SIM ejector tool A Quick starting guide Overview N Item Description 1 3.5 mm headphone jack Connect to stereo earphones Quick starting guide 2 Power button www.kapsys.com Press and hold to turn SmartVi-

sion3 ON/OFF. Press to turn the screen ON/OFF

(sleep mode) 3 4 5 6 Sim card tray To insert your SIM and SD card Front-facing camera Use for self-portrait images and online video chat Receiver Main receiver for phone calls Display Display data and control with touchscreen 7 Control keys and navigation pad Navigate through the screen with multidirectional commands (up, down, right, left) and a central OK button. Go back to home screen Open the menu of the current screen Go back to the previous screen Delete user input 8 9 Alphanumeric keypad Use to input characters Voice command button Use to dictate text and launch specific features 10 Volume buttons Increase or decrease audio out-

put level. 11 12 Double rear cameras 16 Mega Pixels + 2 Mega Pixels resolution Finger print sensor Use to unlock the phone or make secure payments. 13 Microphone Main microphone for phone calls and voice recognition 14 USB C type connector Charge the battery /

data synchronisation 15 Loudspeaker Main multimedia speaker Getting started Inserting the Nano SIM and micro SD cards SmartVision3 has a dual SIM / SD card connector. You can insert two SIM cards or an SD card and a SIM card. You cannot have both the second Nano SIM card and the mi-

croSD card inserted at the same time. SmartVision3 is only compatible with SIM cards in Nano SIM format. A modified card that is thicker than the standard Nano SIM card will not fit properly on the tray and may damage the SIM connector. The micro SD card is optional and is not supplied with the SmartVision3. SmartVision3 supports SD cards up to 128 GB. 1.Open the SIM tray:

Lay the phone flat in front of you face up. Insert the tip of the SIM extraction tool supplied with your phone into the SIM tray eject hole on the left side of the phone. Make sure the SIM extraction tool is perpendicular to the hole. Otherwise, the device may be damaged. When inserting the SIM extraction tool into the SIM tray eject hole, do not obstruct the tray to avoid damaging the eject mechanism inside the slot. Push the tip all the way into the hole until the SIM tray pops out and then pull it out. The SIM tray has two compartments. The first compartment allows you to insert a SIM card or an SD card. The second compartment allows you to insert only a SIM card 3.Inserting two SIM cards:

Position the first SIM card, metal side down, bevelled corner at the bottom right, in the first compartment of the SIM tray. Perform the same operation for the second compartment of the SIM tray. Then gently reinsert the SIM tray all the way into the slot. When reinserting the SIM tray into the phone, make sure it is oriented horizontally so that the SIM cards do not fall out. The tray should be fully inserted and not protrude from the slot or fall out. The position of the SIM cards in the tray does not matter. The SIM cards configuration and management is done via the phones Settings into Network and Internet section. When the battery is fully charged, disconnect the charger from the device. Turning your smartphone ON/OFF To turn on your SmartVision3, press and hold the ON/

OFF button located on the upper edge. When the device vibrates, release the button. If the product does not turn on, check that the battery has been properly charged. To turn off the device, press and hold the ON/OFF button located on the upper edge. Then select on the screen the ON/OFF item then Switch off. Restart the phone To restart the device, make a long press on the ON/OFF button located on the upper edge. Then select on the screen the ON/OFF item then Restart. If your device freezes and becomes unresponsive, press the power button for 10 seconds to automatically restart the phone. Standby mode When SmartVision3 is turn ON, a short key press of the ON/OFF button will bring it to standby mode (screen off), or back to running mode (screen on). The standby mode is activated after an inactive period for battery safe. In standby mode the screen is off and the keyboard is disabled, however the functions remain active. You can still receive your calls, messages, emails etc. 2.Inserting a SIM card and a SD card (optional):

Position the SD card in the first compartment of the tray, metal side down, bevelled corner down. Then position the SIM card in the second compartment of the tray, metal side down, the bevelled corner at the bottom right. Then gently reinsert the SIM tray all the way into the slot. When rein-

serting the SIM tray into the phone, make sure it is oriented horizontally so that the SD card and SIM card do not fall out. The tray should be fully inserted and did not protrude from the slot. Charging the battery Charge the battery before using the device for the first time or when you have not used it for a while. Only use a compatible charger and cable for your device. Using an in-

compatible charger and cable may cause injury or damage your device. To charge the battery, connect the USB Type-C cable between the SmartVision3 USB connector and the AC charger. Then plug the AC charger into a wall outlet. Quick Starting guide SV3.indd 1 Quick Starting guide SV3.indd 1 21/06/2022 08:59:34 21/06/2022 08:59:34 Legal notice and Warranty 1. USE PRECAUTIONS AND RECOMMENDATIONS Read all information before using the device to ensure safe and proper use.

- Handle your SmartVision3 and its accessories with care, do not drop or knock them.

- Do not disassemble the product as this will void the war-

ranty and may cause damage that may render the product unusable.

- Use manufacturer-approved chargers, data cables and other accessories to prevent potential electric shock, fire, explosion or other hazards.

- Do not dismantle the product as this will result in the war-

ranty being voided. Back cover cannot be removed.

- Clean the product using only a soft, slightly damp cloth. Do not use chemicals, detergents or abrasive products.

- This product is not waterproof. Protect it from damp and splashes of liquids.

- Do not store your device in extremely hot or cold places. Storage temperature is -20C to +45.

- Do not expose your device to direct sunlight for long pe-

riods. Operating temperature range is -5C to +40C.

- When charging, please keep the device in well-ventilated area. Charge the mobile phone in an environment between 5C and 35C.

- Do not use the product near magnetic fields.

- Do not use your device if the screen is broken or cracked, as this could cause injury. If any part of the product is cracked or damaged contact your distributor.

- Do not use the product in potentially explosive areas.

- During prolonged use of your product, it may heat up. If the device overheats and reaches a certain temperature, functions and performance may be limited or the device may turn off to cool down.

- Be careful not to expose the camera lens to a strong light source, such as direct sunlight. If the lens is exposed to a strong light source, such as direct sunlight or a light beam, the cameras image sensor may be damaged. Damage to the image sensor can cause dots and spots to appear in photos.

- If dust or foreign objects get into the microphone, speaker or receiver, the sound of the device may become inaudible or some functions may not work. If you try to remove dust or foreign objects with a sharp object, you may damage the device and affect its appearance.

- Connectivity issues and battery drain may occur in the following situations:

If you attach metal stickers to the antenna area of the device. If you install a protective case made of metallic materials on the device. If you cover the antenna area of the device with your hands or other objects while using certain functions, such as calls or data connection.

- For optimal performance of your device, we recommend that you switch it off from time to time.

- The use of an approved KAPSYS screen protector is recommended. Unapproved screen protectors may cause sensors to malfunction.

- Do not use bare or damaged cables, and do not use a damaged or defective charger. 2. SAFETY AND HEALTH

- Keep the product away from small children.

- Do not use your mobile phone and adhere to all safety warnings and regulations regarding mobile device usage while driving.

- Protect your hearing: avoid prolonged exposure to high sound levels when using the earphones, loudspeakers or the receiver.

- Do not use the product in health care facilities and ask to authorized personnel before using your phone near medical equipment.

- Persons with electronic implants (pacemakers, insulin pumps, neurostimulators, etc.) are recommended to place the mobile phone 15 cm away from implant or on the oppo-

site side of the implant. 3. WARRANTY Your warranty is only valid under normal use of the device. All man-made damages and any of the following conditions are not covered by the warranty:

- The warranty period has expired.

- Normal wear and tear of the product (such as casing, keypad, display screen, antenna and other accessories).

- Damage resulting from improper use, exposure to humidity or liquid, or proximity to a heat source.

- Cracked or broken devices, or devices with visible signs of shocks

- Failure to respect the precautions for use, accidents, negligence, misuse or use inconsistent with the instructions provided with the device, or commercial use of the product.

- Use of accessories or connectors not recommended by the manufacturer.

- The customer disassembles, repairs or modifies the de-

vice without the KAPSYS authorization or has it repaired at a repair shop that is not included in the KAPSYS approved repair network.

- Damage caused by a force majeure such as floods, fires, earthquakes, and lightning.

- Faults or malfunctions caused by the internet or wireless service providers (operators) are not covered by the war-

ranty. In this case service provider will need to be contacted directly for assistance.

- A reduction in the battery charge holding capacity. During the period of warranty only a minor decrease in its capacity should occur. After this period any decrease in its capacity or loss of function is considered to be caused by a common wear. In some out of warranty failure cases, a repair can be im-

plemented at your own cost. In case of breakdown, please contact your dealer. It is recommended that you perform one or more backups of the data saved in your product. KAPSYS cannot be held responsible for the loss of this data because of a malfunc-

tion, repair or replacement of the product. the base station, the lower the transmission output of your mobile telephone. To reduce exposure to RF energy, use a hands-free accessory or other similar option to keep the device away from your head and your body. The highest SAR average value over 10g of body tissue of this device is listed below:

Head: 0,498 W/kg Body: 0,765 W/kg Limbs: 1,485 W/kg 5. Restrictions in 5GHz band According to Article 10 of directive 2104/53/EU, the WLAN function for this device is restricted to indoor use only when operating in the 5.15 to 5.35 GHz frequency range in the following countries: AT, BE, BG, CH, CY, CZ, DE, DK, EE, EL, ES, FI, FR, HR, HU, IE, IT, IS, LV, LI, LT, LU, LV, MT, NL, NO, PL, PT, RO, SI, SE, SK, UK. 5. CUSTOMER SERVICE For more details, please contact your dealer Customer Service or send us a mail to:

Service Clients KAPSYS 694 avenue du Docteur Maurice Donat 06250 MOUGINS SOPHIA ANTIPOLIS, France. You can also visit our website: www.kapsys.com. 4. ABOUT SPECIFIC ENERGY ABSORPTION RATE*

6. TRADEMARKS Company and product brands referred to in this document, are trademarks, either registered or not, and owned by the respective holder as follows:

KAPSYS words, brands and logos are registered trade-

marks of KAPSYS SAS. Android, Google, Google Play, Chromecast built-in, You-

Tube and other marks and logos are trademarks of Google LLC. Bluetooth names, brands and logos are registered trade-

marks of Bluetooth SIG Inc. Your SmartVision3 by KAPSYS is a radio transmitter/re-

ceiver. It is designed and manufactured to comply with the radiofrequency (RF) exposure thresholds recommended by the European Union. This device meets the requirements of the International Commission on Non-Ionizing Radiation Protection (ICNIRP) and European Standard for mobile radio devices. The guidelines use a unit of measurement know as Specific Absorption Rate, or SAR. The SAR limit for mobile devices is 2.0W/kg when tested at the head or worn on the body, 4.0W/kg when worn on the limbs. For body-worm operation, this phone has been tested use with accessories that contain no metal and that position the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with RF exposure. If you do not use a body-worm accessory and are not hol-

ding the phone at the ear, position the handset a minimum of 1.5 cm from your body when phone is switched on. During use, the actual SAR level is usually much lower than the maximum value. In general, the closer you are to 7. ABOUT THIS DOCUMENT Information published in this document is liable to change without notice. KAPSYS reserves the right to amend the contents of this document with no obligation to notify any person or entity whatsoever thereof. KAPSYS cannot be held liable in the event of any technical or publishing errors or omissions contained herein, or in the event of accidental or indirect loss or damage resulting from the product ope-

ration or from using this document. KAPSYS endeavours to continuously improve our product and its features quality and performance. KAPSYS therefore invites you to visit their website (www.kapsys.com) for the latest update on the use and operation of this product. RoHS COMPLIANCE:

This product is compliant with the 2015/863/EC Directive of European Parliament amending ROHS directive 2011/65/

EU, on the use restriction of certain hazardous substances

(RoHS) in electrical and electronic equipment and its amendments. CE MARKING This product complies with the CE marking re-

quirements for use in residential, commercial or light industry installations, and satisfies with the provisions of the R&TTE (2014/53/EU/

RED) Directive. For more information about CE marking, you can also visit our website at www.kapsys.com. WEEE DIRECTIVE This symbol on the product or on its pac-

kaging indicates that this product must not be disposed of with your other household waste. In accordance with the 2012/19/EU European directive on waste electric and electronic equipment (WEEE), his electrical product must not, under any circumstances, be discarded as unsorted municipal waste. Please dispose of this product by returning it to its point of sale or to your councils local designated collection points for recycling. CAUTION:

Permanent hearing loss may occur if earphones are used at high volume for a prolonged period of time. Quick Starting guide SV3.indd 2 Quick Starting guide SV3.indd 2 21/06/2022 08:59:35 21/06/2022 08:59:35 FCC Statement 4G Phone has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modi?cations to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Specific Absorption Rate (SAR) information:

4G Phone meets the government's requirements for exposure to radio waves. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons regardless of age or health. FCC RF Exposure Information and Statement the SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types: 4G Phone has also been tested against this SAR limit. This device was tested for typical body-worn operations with the back of the 4G Phone kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain an 10mm separation distance between the user's body and the back of the 4G Phone. The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided.

Page 1 of 1 FCC ID: 2AXFA-SMARTVISION3 LABEL AND LOCATION 4G Phone Model: SmartVision3 KAP22000 FCC ID: 2AXFA-SMARTVISION3 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

(Size: L 4.0cm x W 2.0cm) Label Location Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: webmaster@lcs-cert.com | Web: www.lcs-cert.com Scan code to check authenticity

Kapsys Section 2.911(d)(5)(i) Certification Equipment Type Company name: Kapsys Address: 694, Avenue Maurice Donat, 06250, Mougins, France Product Name: 4G Phone FCC ID: 2AXFA-SMARTVISION3 Model(s): SmartVision3 KAP22000 2.911(d)(5)(i) Equipment Type We, SHENZHEN LINWEAR INNOVATION TECHNOLOGY CO.,LTD. certify that the equipment for which authorization is sought through certification is not:

Prohibited from receiving an equipment authorization pursuant to 2.903; of the FCC rules. Identified as an equipment type in the Covered List NOTE 1 Yours sincerely, Name: Laurent Delesalle Date: 2023-04-07 Title and Company name:Chief Operating officer/ Kapsys NOTE 1 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(i) Equipment Type Attestation v1.2

Kapsys Section 2.911(d)(5)(ii) Certification Applicant (Covered List) Company name: Kapsys Address: 694, Avenue Maurice Donat, 06250, Mougins, France Product Name: 4G Phone FCC ID: 2AXFA-SMARTVISION3 Model(s): SmartVision3 KAP22000 2.911(d)(5)(ii) Applicant filing We, Kapsys certify that, as of the date of the filing of the application, the applicant is is not identified NOTE 1 on the Covered List NOTE 2, established pursuant to 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Laurent Delesalle Date: 2023-04-07 Title and Company name:Chief Operating officer/ Kapsys NOTE 1 Delete option not applicable to this application. NOTE 2 Covered List; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References;

1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the 2.911 (d)(5)(ii) Applicant Attestation v1.3

FCC US Agent, LLC Section 2.911(d)(7) USA Agent for Service of Process Company name: FCC US Agent, LLC Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA FCC ID: 2AXFA-SMARTVISION3 2.911(d)(7) USA Designated Agent for Service of Process We, Kapsys designate FCC US Agent, LLC for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either we the grantee have permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or at the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: FCC US Agent, LLC USA Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Applicant Company name: Kapsys USA Address: 694, Avenue Maurice Donat, 06250, Mougins, France FRN Number: 0033402884 Contact Name: Tim Payne Telephone No: 708-571-3148 Email: Support@FCCUSAgent.com FCC Grantee Code: 2AXFA Contact Name: Laurent Delesalle Telephone No: +33 (0)6 74 23 76 43 Email: laurent.delesalle@kapsys.com Signature:

Title:Manager Date: 2023-04-07 Signature:

Title: Chief Operating officer Date: 2023-04-07 2.911 (d)(7)USA Agent v1.4 FCC US Agent, LLC NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-nation al-security-threats-to-the-communications-supply-chain-through-the 2.911 (d)(7)USA Agent v1.4

Kapsys Agent Authorization Company: Kapsys Address: 694, Avenue Maurice Donat, 06250, Mougins, France Product Name: 4G Phone Trade Mark: Kapsys Model Number(s): SmartVision3 KAP22000 FCC ID: 2AXFA-SMARTVISION3 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2023-04-07 Name:

Laurent Delesalle Title:

Chief Operating officer Company: Kapsys

Kapsys Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AXFA-SMARTVISION3 Date: 2023-04-07 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Laurent Delesalle Title: Chief Operating officer

KAPSYS WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: 2AXFA-SMARTVISION3 Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Signature:

Name / Title: Laurent Delesalle / Chief Operating officer Phone: +33 (0)6 74 23 76 43 Email: laurent.delesalle@kapsys.com Date: 2023-04-07 Page 1 of 1 Rev.2.0