|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5 6
|
Effective |
2019-05-23
|
|
1 2 3 4 5 6
|
2018-06-07
|
|
1 2 3 4 5 6
|
Applicant's complete, legal business name |
KATHREIN Sachsen GmbH
|
|
1 2 3 4 5 6
|
FCC Registration Number (FRN) |
0017985607
|
|
1 2 3 4 5 6
|
Physical Address |
Lindenstrasse 3
|
|
1 2 3 4 5 6
|
Muehlau, N/A
|
|
1 2 3 4 5 6
|
Germany
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5 6
|
TCB Application Email Address |
c******@ul.com
|
|
1 2 3 4 5 6
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5 6
|
Grantee Code |
WJ9
|
|
1 2 3 4 5 6
|
Equipment Product Code |
WL1837MOD
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5 6
|
Name |
J**** S******
|
|
1 2 3 4 5 6
|
Title |
Engineer
|
|
1 2 3 4 5 6
|
Telephone Number |
+49-3******** Extension:
|
|
1 2 3 4 5 6
|
Fax Number |
+49-3********
|
|
1 2 3 4 5 6
|
E-mail |
j******@kathrein-sachsen.de
|
|
|
app
s
|
Technical Contact
|
|
1 2 3 4 5 6
|
Firm Name |
KATHREIN Sachsen GmbH
|
|
1 2 3 4 5 6
|
Name |
J******** S******
|
|
1 2 3 4 5 6
|
Physical Address |
Lindenstrasse 3
|
|
1 2 3 4 5 6
|
Muehlau, 09241
|
|
1 2 3 4 5 6
|
Germany
|
|
1 2 3 4 5 6
|
Telephone Number |
+49-3******** Extension:
|
|
1 2 3 4 5 6
|
+49-3******** Extension:
|
|
1 2 3 4 5 6
|
49 37******** Extension:
|
|
1 2 3 4 5 6
|
Fax Number |
49-37********
|
|
1 2 3 4 5 6
|
E-mail |
j******@kathrein-sachsen.de
|
|
1 2 3 4 5 6
|
j******@kathrein-sachsen.con
|
|
1 2 3 4 5 6
|
j******@kathrein-sachen.de
|
|
|
app
s
|
Non Technical Contact
|
|
1 2 3 4 5 6
|
Firm Name |
KATHREIN Sachsen GmbH
|
|
1 2 3 4 5 6
|
Name |
D****** S****
|
|
1 2 3 4 5 6
|
Physical Address |
Lindenstrasse 3
|
|
1 2 3 4 5 6
|
Muehlau, 09241
|
|
1 2 3 4 5 6
|
Germany
|
|
1 2 3 4 5 6
|
Telephone Number |
+49-3******** Extension:
|
|
1 2 3 4 5 6
|
+49-3******** Extension:
|
|
1 2 3 4 5 6
|
49 37******** Extension:
|
|
1 2 3 4 5 6
|
E-mail |
d******@kathrein-sachsen.de
|
|
1 2 3 4 5 6
|
d******@kathrein-sachsen.de
|
|
1 2 3 4 5 6
|
d******@kathrein-sachsen.com
|
|
1 2 3 4 5 6
|
d******@kathrein-sachen.de
|
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 6 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 | No |
| 1 2 3 4 5 6 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 6 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 6 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 6 | DTS - Digital Transmission System |
| 1 2 3 4 5 6 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | WLAN and BT Module |
| 1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 6 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 5 6 | Purpose / Application is for | Class II Permissive Change |
| 1 2 3 4 5 6 | Change in Identification |
| 1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 6 | Grant Comments | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode.
Class 2 Permissive Change to the module for mobile usage in a specific host product in accordance with this filing. RF exposure compliance is limited to the specific operating configurations tested for this filing |
| 1 2 3 4 5 6 | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode.
Class 2 Permissive Change to the module for mobile usage in a specific host product in accordance with this filing. RF exposure compliance is limited to the specific operating configurations tested for this filing. |
| 1 2 3 4 5 6 | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.
Class 2 Permissive Change to the module for mobile usage in a specific host product in accordance with this filing. RF exposure compliance is limited to the specific operating configurations tested for this filing. |
| 1 2 3 4 5 6 | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| 1 2 3 4 5 6 | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| 1 2 3 4 5 6 | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labelling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| 1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5 6
|
Firm Name |
UL VS Ltd
|
|
1 2 3 4 5 6
|
SPORTON International Inc.
|
|
1 2 3 4 5 6
|
Name |
D****** C********
|
|
1 2 3 4 5 6
|
A**** C******
|
|
1 2 3 4 5 6
|
Telephone Number |
00-44********
|
|
1 2 3 4 5 6
|
886-3******** Extension:
|
|
1 2 3 4 5 6
|
Fax Number |
00-44********
|
|
1 2 3 4 5 6
|
886-3********
|
|
1 2 3 4 5 6
|
E-mail |
d******@ul.com
|
|
1 2 3 4 5 6
|
a******@sporton.com.tw
|
|