KAWA USER MANUAL Le manuel d'utilisation BIR nw English Basse 8 Espafiol -
PyCcKUn ~~~
Portugus Monitor Menu Settings & Icons Description 1. Menu settings Press the [MENU] button on the Monitor to display the functional interface, as shown below:
& Monitor Mode VOX Mode When you turn on the VOX mode, the screen will be turned on automatically if the noise is detected above your pre-set level. VOX Threshold 1-5 thresholds are optional. Audio Only Select "Audio Only", monitor display turns off, but you'll hear audio from your camera(s). B EN Directory Box Contents 3 8) Box Contents - B Monitor Features + -
Baby Monitor Baby Camera Wall Mount Camera Features (S7-M) (S7-C) Monitor Charging Method Camera Power Supply Method -~ . u 5 Camera Installation Methods --------------------s-ssenseeeeseeeeceeon Add Camera to the Baby Monitor --
Display Mode of Screen -- - Monitor Camera Monitor TYPE-C Adapter Adapter Power Cable
(SV 2A) (SV 1A) (1000+50mm) Monitor Menu Settings & Icons Description -----------
Warning Explain Certification Declaration of Conformity
% A ia 3 ' aa Camera Micro-USB Mounting Power Cable Screws Pack
(2600+20mm) Lullaby Monitor white noise Help parent to sleep. Select your desired white noise. You can adjust the volume by pressing the "-/+"
volume button. Camera Lullaby Comfort baby. Select your desired lullaby song. You can adjust the volume by pressing the "-/+" volume button. Sound Alert You can set the Baby Monitor to alert you when a specific noise level is detected Note: Surrounding noise might set off false alarm. High Temp Alert When the temperature is higher than the value you set, the monitor will alert. Note: The high temperature alert you set must be higher than the low temperature alert you set. Note: Alert is automatically disabled after enabling the lullaby function. Warning: The sound of lullabies may mask the baby's cry. Clock Reminder Feeding, Diaper Changing, Other Low Temp Alert When the temperature is lower than the value you set, the monitor will alert. Note: The low temperature alert you set must be lower than the high temperature alert you set. Alert Duration s Secs, 10 Secs, 20 Secs and 30 Secs are optional.
"10 Secs" by default. The monitor will alert continuously according ff, 1H, 1.5H, 2H, 2.5H, 3H, 3.5H, 4H anc mM are ion to the alert duration you set. Off, 1H, 1.5H, 2H, 2.5H, 3H, 3.5H, 4H and custom are optional Description:
Alert Volume 1-3 volume are optional, "2" by default. Note: When the Monitor paired more Cameras, if you set volume 1 which means all paired cameras are volume 1 1. "Off" indicates that the clock reminder is turned off. 2."1H, 15H, 2H, 2.5H, 3H, 3.5H, 4H" means that the monitor will alarm you after 1, 1.5, 2, 2.5, 3, 3.5, 4 hours. (e.g. When you Key Note:The interval duration between each sound alarm is 5 seconds. It will not alert during this interval even there is alert trigger condition. choose "Feeding" > "3H", means that the alarm clock will remind you to feed after 3 hours) 3. Custom: You can set the clock according to the time you need. Monitor Features Volume -/+Keys Menu Button:
1) Short press the [Menu] to pop up the menu. 2) Short press the [Menu] to close the menu and return to the home page, 3) When the camera is recording, press [menu] key for 2 seconds to stop recording; When the camera with a micro SD card inserted and there is no video recording, press the [menu]
button for 2 seconds to start video recording. Ook key:
1) Click the [OK] button to enter the Camera Setting in the disconnected interface 2) For function selection, press the [OK] key to confirm the selection. Camera Settings Camera Pairing 1. Add Camera (Note: You can add up to 4 cameras per baby monitor.) 2. Delete Camera Display Mode Full screen, cycle cameras. Note: When multiple cameras are connected and set to "cycle cameras", the monitor will cycle through the list of connected baby monitors according to the pre-set interval. Video Screen Setting "Normal" by default.When the camera is inverted for mounting, select the corresponding camera first, select
"Rotate 180", and then press "OK" to complete the setting. Record Mode No Record, Cyclic Recording(when motion detected), Cyclic Recording Select No Record it means that the video will not be recorded, and it won't be stored in the micro SD card Select Cyclic Recording(when motion detected) : It means that recording starts when motion detected. "Cycle" means that when the micro SD card fills up, the earliest videos will be gradually and automatically deleted to store the latest video. Select Cyclic Recording :it means that the video will keep recording circularly, no matter the motion detected or not. Please use a 16GB~128GB Micro SD card with data rate of Class 10 or above. 3) When connecting multiple cameras and the monitor is in multi-screen display mode, press the [OK] button for 2 seconds to switch monitoring screen.
@@ davigation Buttons Return to previous level of menu/Talk button:
1) Short press the[ return menu /Talk intercom] button in the menu bar and return to the superior menu. 2) Any interface, long press[return to the last menu/ Talk intercom]
button to achieve voice intercom.
@ Power Button:
Long press for 3 seconds to power on / off, short press to switch on / off the monitor screen
@ Press the button: switch among zoom 1.5X, zoom 2X and zoom off. Hold the button: take a picture and save it to the memory card.
@ Monitor LED Indicator
(Red: In Charging Green: Full Power) Monitor TYPE-C Port Display Screen Microphone @ Reset Button
@ Support Stand Speaker Time Stamp If the Time Stamp is enabled, the recorded video will contain the time information. In some cases, it can be used as video evidence. Status of micro SD card Show more details of the micro SD card. Youcan select format to format the micro SD card.Cautious!
Formatting will delete all files in the micro SD card and cannot be recovered. UF sie) Night Vision Mode Automatic and close are optional. When set to "Auto", camera automatically switches the screen color according to the light condition in the room. Note: If the night vision mode is set to "Close', the Monitor will stick to daylight screen color and will not change when the surrounding environment is getting dark. Time Setting Set the monitor system time. Brightness Set the screen brightness. Sleep Mode Off, Imin, 3min and 5min are optional Enable to automatically turn off the screen after Imin, 3min or 5min. Ifyou select "Off", the monitor won't sleep automatically. Language Setting Set the monitor display language. Temperature Unit "C and F are optional. Select the desired temperature unit. Camera Features
@ Wide-Angle Lens Micro SD Card Slot Camera Antenna
@ Speaker camera Micro USB Port
@ Microphone Camera Power LED Status Indicator
@ Temperature Sensor camera Pairing Button Anti-Screen Flicker If the baby monitor's screen is flickering, change to the other Anti-Screen Flicker mode. Illumination source frequency: 50Hz and 60Hz optional. Please select the approiate frequency of the lighting source. Default Settings Reset all options to their default setting, Version Information Display Monitor version number, Camera version number, Monitor SN number, Camera SN number. Small icons descript Tall Wireless signal strength Current battery power status of monitor The volume level of the room where the camera is located Monitor Charging Method Please fully charge the Monitor before using. Charging method 1. Connect one end of the TYPE-C(1m) cable to the Baby Monitor, and the other end to the power adapter (SV 2A) 2. Plug the adapter into a power outlet. 1) Connect one end of the Micro USB (2.6m) cable to the camera, and the other end to the power adapter (5V 1A). 2) Plug the adapter into a power outlet. After powering the Camera and fully charging the Monitor, you can enjoy the video baby monitor. Baby Monitor is charging Night Vision Mode is enabled The monitor is playing all white noise circularly The temperature of the room where the camera is located Baby Monitor has successfully connected to Camera Camera is cycling lullabies 5 The monitor is playing one kind of white noise Acoustic alarm is triggered Itis cycling through the Cameras screens, and currently cycling to Camera3 Cameras playing asingle lullaby Currently set time VOX mode is on Camera Installation Methods Install Camera( wall mount & corner mount) 1) Determine the installation position. 2) Put the upper wall bracket on the mounting position and mark the screw hole with a pencil. 3) Drill the hole 06.0 mm on the wall, then insert the expansion nail into the hole. 4) Screw through the mounting hole of the upper wall bracket and screw into the expansion nail. 5) Align the Camera on the upper wall bracket, push forward and hold the Camera Note: Please make sure the Camera is properly installed and secured. Installation Method 1:
Warning Explain STRANGULATION HAZARD: Cords can STRANGLE children. Keep cords out of the reach of children (more than WARNING 3ft (0.9m) away). Certification Product Name: Baby Monitor Brand Name: KAWA Model Name: S7 Manufacturer: KAWA ELECTRIONICS COMPANY LIMITED Use the Baby Monitor in the environment with the temperature between -10C and 50C, otherwise, it may damage your Baby Monitor. It can be operating under 2000m. Hereby, KAWA ELECTRONICS COMPANY LIMITED declares that the radio equipment type Baby Monitors $7 is in compliance with Directive 2014/53/EU.The full text of the EU declaration of conformity is available at the following internet address:
www.kawa-in.com C This device complies with the radio interference requirements of the European Community. EN 20 Winding the USB cable Adhesive tape The adhesive tape can be affixed to the left or right side. a The product shall only be connected to a USB interface of version USB2.0 or higher and that the connection to a power USB is prohibited. Caution:
For Adapter: Shall be installed near the equipment and shall be easily accessible. For Battery: Risk of explosion battery is replaced by an incorrect type, dispose of used batteries according to the instructions. To prevent possible hearing damage, do not listen at high volume levels for long periods. Only can use the adapter as below:
ST-M: Rated Input & Output:
TEKA-UCA20EU/BS ACLOOV-240V, 50/60Hz, 200mA, DC5.0V, 2A. ST-C: Rated Input & Output:
TEKA-UCA20EU/BS ACLOOV-240V, 50/60Hz, 200mA, DC5.OV, 1A. Manufacturer: Shenzhen TEKA Technology Co., Ltd. Model Name: TEKA-UCA20EU/BS , TEKA-UCALOEU/BS The plug could be disconnected from adapter. Operating Frequency Range | Themaximum RF Output Power WiFi:2412-2472 MHz 17.55dBm EVATOST CONSULTING LTD Suite 1, First Flaor, Moy Road Business Cente tate Wel Casi, Wales, C715 708 contact@evatmastercom eVatmaster Consulting GmbH Bettinast 30
{60325 Frankfurt am Main,Germany contact@evatmastercom 21 Add Camera to the Baby Monitor Baby Monitor and Baby Camera are paired out of the box. Please refer to the following steps when adding additional Baby Cameras or after resetting a Baby Camera Please make sure the Baby Monitor and the Baby Camera matches the same version. 1) Press the [MENU] button to open the menu, select "Camera Settings" >" Camera Pairing", press [OK]to add Camera. 2) Press the pair button on the back of the Camera for seconds until you hear the ticking prompt. Times Gu)
Note: If you restore the initial plant settings, press the OK button in the "Please add a camera" interface to add Camera.
@ After the Monitor and Camera are successfully connected, please avoid using the Monitor and Camera close to each other, otherwise it may cause howling FCC Statement NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. EN 2 Display Mode of Screen When you add more than two Baby Cameras, you can manually and automatically switch camera screen. 1. Manual switching: Long press the [OK] button, the screen will be switched to the next screen. The icon of the camera you select will display. 2, Automatic switching (Muti-Camera Cycling): select "Camera Settings"
"Display Mode"-> "Muti-Camera Cycling /@" option. The screen cycles through the list of connected Baby Cameras according to pre-set intervals. comer Paring Dispoy Mode Video Screen setng ecordode FCC RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body. This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development \
Canada s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference,
(2) This device must accept any interference, including interference that may cause undesired operation of the device. L metteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR d Innovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. L exploitation est autorise aux deux conditions suivantes :
(1) L appareil ne doit pas produire de brouillage;
(2) L appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d en compromettre le fonctionnement. Radio Frequency Exposure Statement for I This equipment complies with IC exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator &
body. Full Screen This mode allows you to see one camera in full-screen view. Cet quipement est conforme aux limites d'exposition IC dfinies pour un environnement non contral. Cet quipement doit tre install et utilis avec une distance minimale de 20 cm entre le radiateur et la carrosserie. IC: 27280-S7M FCCID: 2AZWZ-STM IC: 27280-S7C FCC ID: 2AZWZ-S7C AX WARNING This product can expose you to chemical BPA which is known to the state of California to cause reproducdive harm. For more information, go www.P65Wamings. ca. gov. Declaration Of Conformity 1. Please use the standard AC Power Chargers and Charging Cables. 2. Do not use the device in an environment where the temperature is too high or too low, and do not expose the device to strong sunlight or an environment that is too humid. 3. The suitable ambient temperature for S7-M and accessories is -10C to +50C. 4, The suitable ambient temperature for S7-C and accessories is -10C to +50C. 5, When charging, please place the device in a well-ventilated environment with normal room temperature. It is recommended to charge the device within the temperature range of 0C~45C.
{RX This products designed and manufactured with high quality materials and components, which can be recycled and reused. Sx Trsormba means the product must not be discarded as household waste, and should be delivered to an appropriate mm collection facility for recycling, Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product. MMR ADrosen _Angposer Cet appareil, WENiteeh men etacs ses accessoires et cordons an se recyclent Points de collecte sur www.quefairedemesdechets.fr Privilgiez la rparation ou le don de votre appareil !
eb==a Warranty:12-month limited warranty Manufacturer: KAWA ELECTRONICS COMPANY LIMITED Email: support@kawa-in.com Web: www.kawa-in.com Address: FLAT A21/F CHEUNG LEE IND BLDG 9 CHEUNG LEE ST CHAI WAN HONG KONG 25