KBC Networks Limited Radio module 2 x 2 802.11N MIMO mini-PCI Modules WLM200N5-23-4.9 WIRELESS-A/N 20DBM NETWORK MINI PCI ADAPTER WITH ESD Features 4.9GHz IEEE 802.11n compliant and backward compatible with 802.11a 4.9GHz Single-band MIMO 2x2 spatial multiplexing technique Atheros XSPAN family chipset Delivers 10 times the throughput and nearly twice the range of legacy 802.11a network Multi-Country Roaming Supported (IEEE802.11d Global Harmonization Standard) Built-in ESD Protection with ESD/EMP Immunity Threshold: 15KeV Supports up to 300Mbps physical data rates 2 x MMCX or 2 x U.FL Antenna Connectors Chipset Host Interface Operating Voltage Power Consumption Antenna Connector Data Rate Frequency Range Modulation Techniques Radio & EMC Certification RoHS Compliance Temperature Range Humidity Dimension Atheros AR9220 PCI Interface v2.3 (Type III-A Mini PCI form factor) Technical Specifications 3.3 VDC 11a Cont. Tx @6M 11na Cont. Tx@HT20 MCS0 11na Cont. Tx@HT40 MCS0 11a Cont. Rx Standby 3.5W 3W 3W 0.9W 0.7W 2 x MMCX or 2 x U.FL IEEE 802.11a : 54Mbps 48Mbps 36Mbps 24Mbps 18Mbps 12Mbps 9Mbps 6Mbps IEEE 802.11n :
20MHz 1Nss: 65Mbps @ 800GI, 72.2Mbps @ 400GI (Max.) 2Nss: 130Mbps @ 800GI, 144.4Mbps @ 400GI (Max.) IEEE 802.11a/n: 4.900-4.98 GHz OFDM: BPSK, QPSK, 16QAM, 64QAM FCC Yes Operating: -20C to 70C Storage: -40C to 90C Operating:5% to 95% (non-condensing) Storage: Max.90% (non-condensing) 59.6mm x 51.5mm x 6mm WLM200N5-23 ESD MIMO MINIPCI CARD RADIO TX SPECIFICATIONS DataRate 6-24Mbps 36Mbps 48Mbps 54Mbps TX Power
(per chain) 20dBm 20dBm 19dBm 19dBm 17dBm 16.5dBm 16dBm 16dBm Sensitivity
(2 chains)
-97dBm
-97dBm
-96dBm
-94dBm
-97dBm
-94dBm
-92dBm
-87dBm
-84dBm
-80dBm
-79dBm
-77dBm 802.11a 5GHz 11n HT 20 DataRate MCS 0/8 MCS 1/9 MCS 2/10 MCS 3/11 MCS 4/12 MCS 5/13 MCS 6/14 MCS 7/15 Data Rate 6M 9M 12M 18M MCS0 MCS1 MCS2 MCS3 MCS4 MCS5 MCS6 MCS7 802.11a 5GHz 11n HT 20 TX Power 21dBm 20dBm 19dBm 18dBm Tolerance 2dB 2dB 2dB 2dB Tolerance 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB RX SPECIFICATIONS Tolerance 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB 2dB Cable Dimensions Terminal Material Attachment Procedure Ordering Information ESD CABLE SPECIFICATION 26cm length Copper End of ESD Cable tied to Earth Ground CODES Antenna Connectors type Carton Dimension WLM200N5-23 6AA1300ESD4.9 U.FL For 50pcs (pcs/ctn), 0.40m * 0.22m * 0.085m / 0.006 = 1.5KG For 250pc (pcs/ctn), 0.45m * 0.45m * 0.24m / 0.006 = 8.1KG
Module grounding cable included
Depends on your order configuration
Configurations are subject to change without notice Please contact Compex sales representatives for other available configurations Compliance Information FCC Compliance Statement:
This device complies with Part 15 of the FCC Rules . Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. This device must accept any interference received, including interference that may cause undesired operation. Product that is a radio transmitter is labeled with FCC ID. FCC Caution:
(1) Exposure to Radio Frequency Radiation. This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.
(2) Any changes or modifications not expressly approved by the grantee of this device could void the user's authority to operate the equipment.
(3) This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
(4) Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. IMPORTANT NOTE: In the event that these conditions can not be met (for example certain laptop configurations or co-location with another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product
(including the transmitter) and obtaining a separate FCC authorization. WARNING: The antenna gain which being use must less than 17 dBi.
(1) the modules FCC ID is not visible when installed in the host, or
(2) if the host is marketed so that end users do not have straight forward commonly used methods for access to remove the module so that the FCC ID of the module is visible; then an additional permanent label referring to the enclosed module: Contains Transmitter Module FCC ID: OLXWLM200N5-49 or Contains FCC ID: OLXWLM200N5-49 must be used. Dimensions Drawing Compex Systems Pte Ltd 135 Joo Seng Road, PM Industrial Building #08-01, Singapore 368363 Tel: (65) 6286 2086 Fax: (65) 6280-9947 Email: sales@compex.com.sg Compex (Suzhou) Co Ltd NO.12, ChuangTou Industrial Square, LouFeng North, Suzhou Industrial Park, Suzhou, Jiangsu Province, China 215122 Tel: (86)-512-62950050 Fax: (86)-512-62950026 Copyright 2010 Compex Systems. All rights reserved. COMPEX and the COMPEX logo, are registered trademarks of COMPEX Inc. Atheros and other trademarks are properties of their respective owners. While every effort is made to ensure the information accurate, Compex does not accept liability for any errors or mistakes that may arise. Specification is subject to change without notice. DS V: 2.2.1 Rocky100526 For more information, visit www.compex.com.sg