Product SpecificationsWireless Charger KC001
]
[
[ * ]
[
]
KC001 Wireless Charger V3.0 Michael.chen 2016-10-12 1. Product Overview -------------------------------------------------
3 2. Coil specification-------------------------------------------------
3 3. Indicator light working status
------------------------------------------
4 4. Product Specifications and Parameters -----------------------------------------
4 5. Test Report
-----------------------------------------------6 1 / 4 1. Product Overview 5V/1A WPC QI1.2 This product is a low-power wireless charger that realizes short-distance wireless power transmission through electromagnetic induction. It is suitable for wireless charging of low-power(5V/1A) digital electronic products, eliminating the cumbersome cable charging. This product conforms to WPC Alliance's QI 1.2 wireless charging standard and can be used for wireless charging of all receiving devices that meet this standard. 2. Loop specifications Coil typeA11 Inductance value6.8uH5%
impedance20m height2mm Magnetic film size52mmX0.3mm Diameter 52 mm X thickness 0.3 mm 3. Indicator light working status specification s Motherboar d lamp plate Small lamp LED Blue, green white (colour) power on Blue light off power off charge Be filled Blue light Green light off White light off off 4. Product specifications and parameters 1 outside view drawing 2 / 4 2 Specification size 118*70*87.5mmProduct size: 118U 70g 87.5 (mm) 150g 215g Net product weight: 150g Gross product weight: 215g 3 Product parameters 5V/2A I nput voltage: 5V/2A 120KHz~205KHz Frequency: 120KHz~205KHz
<8mm Receiving distance: < 8mm 72%
Conversion efficiency: 72%
5W Output power: 5W 3 / 4 FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator your body: Use only the supplied antenna.