1. Overview KRF-WXYZ series are powerful, highly qualified & sophisticated access control systems dedicated to all application requiring high level of security providing highly secure access for mainly door access control, time & attendance and parking system It read and write ISO14443A and ISO14443B card through TCP/IP or RS232C interface 2. Product Package KRF-WXYZ , LAN-CABLE(Direct) , AC Adapter 3. GENERAL SPECIFICATIONS 3.1. Power Supply 3.2. Current Consumption 3.3. Reading Distance 3.4. Communication 3.5. Card Operation Frequency 3.6. Indicator(LED/Beeper) 3.7. Environmental Conditions
: AC 100 - 240V(DC output 9V)
: Max 400 [mA]
: up to 30[mm]
: TCP/IP 10/100 Base-T auto detection
: 13.56Mhz 5%
: Power / Good / Error
: Operation -10 ~ 55 , 20 ~
80% RH
: Storage -20 ~ 70 , 0 ~ 95% RH
(without dew forming)
(without dew forming) 3.8. ANTI-Collision procedure support 3.9. Authentication algorithm 3.10. Based on ISO/IEC-14443A (transparent made and T=CL) Information to the user NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. CAUTION : Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. 4.Operation 4-1. Program initialize screen 4-2. Server-Connect Input servers IP, Port number (1~65535) and click <Server Connect> before connecting the server. 4-3. Server-Disconnect Click <Server Disconnect> to disconnect 4-4. UID Read Click <UID Read>, then the readable card type (M : Mifare , U Ultralight) , ATQA , UID , SAK will be showed and UID will be displayed on UID list. 4-5. Mifare 4-5-1. Mifare full screen 4-5-2 Mifare Sector Read In Key A/B, select Key value, Mifare UID Lists UID, Block Address and click <Sector Read>. Then, ATQ , UID , SAK , Block0 , Block1 , Block2 , Block3 value will be displayed. 4-6. Mifare Block Write In Key A/B, select Key value, Mifare UID List UID, Block Address and click <Block Write> button after input Block Write Data. 4-7. Mifare UltraLight 4-7-1 Mifare UltraLight full screen 4-7-2. Page Read Select UltraLight UID Lists UID, Block Address and click <Pager Read>. Then, ATQ , UID , SAK , Page0 , Page1 , Page2 , Page3 value will be displayed. 4-7-3. Block Write Select UltraLight UID Lists UID, Block Address and click <Block Write> button after input Block Write Data. 4-8. Configuration 4-8-1. Configuration full screen 4-8-2. Configuration all Read Select IP from Client Status and click <Configuration Read> button. MAC Address , Source IP , Source Port , Destination IP , Destination Port , Gateway , SubnetMask value will be displayed. 4-8-3. Configuration all Write Select IP from Client Status and change Source IP , Source Port , Destination IP , Destination Port , Gateway , SubnetMask. Then, click <Configuration Write> button. 4-8-4 MAC Write Click <Write> button for the connected servers MAC.. 4-8-5. Source IP Write Change Servers Source IP and click <Write> button. 4-8-6. Source Port Write Change Servers Source Port and click <Write> button.. 4-8-7. Destination IP Write Change Servers Destination IP and click <Write> button. 4-8-8. Destination Port Write Change Servers Destination Port and click <Write>. 4-8-9. Gateway Write Change Servers Gatrway and click <Write>. 4-8-10. SubnetMask Write Change Servers Subnetmask and click <Write>.