Issue Department:Bedding Division
System Instruction
Date:
Author:
2021-07-20
Instruction of RF400B
Instruction of RF400B
Edition:
1.1
Page 1 of 4
Figure 1 button ofremote
1 / 4
Issue Department:Bedding Division
System Instruction
Date:
Author:
2021-07-20
Instruction of RF400B
Edition:
1.1
Page 2 of 4
1
Item
1.1 ZG button ⒃
Click the ZG button, the actuator moves to ZG position, stop when click any button during the
movement;
Press and hold the ZG button for 5s, timer LED of remote flashes, the control box records
current position as ZG position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
1.2 AntiSnore button ⒁
Click AntiSnore button, actuators move to AntiSnore position, stop when click any button
during movement;
Press and hold AntiSnore button for 5s, timer LED of remote flashes, the control box records
current position as AntiSnore position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
1.3 Reset all memory positions to default settings ⑨ + ⒃
Pressa and hold ZG+FLAT buttons(button 1 and 16 in figure 2)for 5s, timer LED of
remote flashes, the control box reset all memory positions to default settings;
1.4 Head up ⑦
1.5 Head down ⑧
Press and hold HEAD UP button of remote, head actuator moves out, stop when
released;
Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released;
2 / 4
Issue Department:Bedding Division
System Instruction
Date:
Author:
2021-07-20
Instruction of RF400B
Edition:
1.1
Page 3 of 4
Press and hold Lumbar up button of remote, Lumbar actuator moves out, stop when released;
Press and hold Lumbar dowm button of remote, Lumbar actuator moves in, stop when released;
Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released;
Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released;
When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head and
Click FLAT button, the bed goes flat, stop when click any button during the process of going
flat;
Click MASSAGE HEAD button, head massage motor switches massage intensity, massage
intensityswitches among 0-1-2-3;
Click MASSAGE Foot button, head massage motor switches massage intensity, massage
intensityswitches among 0-1-2-3;
3 / 4
1.6 Lumbar up ④
1.7 Lumbar dowm ⑥
1.8 Foot up ⑩
1.9 foot down ⑿
foot actuators start moving;
1.10
Flat ⑨
1.11 Massage head ①
1.12 Massage foot ③
Issue Department:Bedding Division
System Instruction
Date:
Author:
2021-07-20
Instruction of RF400B
Edition:
1.1
Page 4 of 4
1.13 Massage timer ②
1.14
Under bed light ⑤
If the massage motors do not work, the button is invalid, if the massage motors work, click the
button to switch the massage time, when massage time switch to 0, turn off the massage;
Click the under bed light button, the under bed light switch its on/off state; After the under bed
light opens, if do not manually close, it will automatically turn off after 5 minutes;
1.15 Memory position ⒀ ⒂
Click memory position to move the actuator to the memory position.
FCC Warning:
Please take attention that changes or modification not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
ISED RSS Warning:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject
to the following two conditions:
(1)
(2)
operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1)
(2)
brouillage est susceptible d'en compromettre le fonctionnement.
this device may not cause interference, and
this device must accept any interference, including interference that may cause undesired
l'appareil ne doit pas produire de brouillage, et
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
4 / 4