Issue Department:Bedding Division
System Instruction
Date:
Author:
2021-7-20
Instruction of RF401B
Edition:
1.1
Page 1 of 4
Instruction of RF401B
Figure 1 button ofremote
1 / 4
Issue Department:Bedding Division
System Instruction
Date:
Author:
2021-7-20
Instruction of RF401B
Edition:
1.1
Page 2 of 4
1
Item
1.1 ZG button ①
Click the ZG button, the actuator moves to ZG position, stop when click any button during the
movement;
Press and hold the ZG button for 5s, timer LED of remote flashes, the control box records
current position as ZG position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
1.2 TV/PC button ⑥
Click TV/PC button, actuators move to TV/PC position, stop when click any button during
movement;
Press and hold TV/PC button for 5s, timer LED of remote flashes, the control box records
current position as TV/PC position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
1.3 LOUNGE button ⑦
Click LOUNGE button, actuators move to LOUNGE position, stop when click any button
during movement;
Press and hold LOUNGE button for 5s, timer LED of remote flashes, the control box records
current position as LOUNGE position;
When in the process of moving to memory positions, the head and foot actuators move first,
then the tilt and lumbar actuators move;
2 / 4
Issue Department:Bedding Division
System Instruction
Date:
Author:
2021-7-20
Instruction of RF401B
Edition:
1.1
Page 3 of 4
Press and hold HEAD UP button of remote, head actuator moves out, stop when
released;
Press and hold HEAD DOWN button of remote, head actuator moves in, stop when released;
Pressa and hold FOOT UP button of remote, foot actuator moves out, stop when released;
Press and hold FOOT DOWN button of remote, foot actuator moves in , stop when released;
When moving to flat position, lumbar actuator and tilt actuator move first, after 500ms, head and
1.4Head up ②
1.5Head down ④
1.6Foot up ③
1.7 foot down ⑤
foot actuators start moving;
1.8 Flat ⑧
Click FLAT button, the bed goes flat, stop when click any button during the process of going
flat;
3 / 4
Issue Department:Bedding Division
System Instruction
Date:
Author:
2021-7-20
Instruction of RF401B
Edition:
1.1
Page 4 of 4
FCC Warning:
Please take attention that changes or modification not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
ISED RSS Warning:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1)
(2)
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1)
(2)
brouillage est susceptible d'en compromettre le fonctionnement.
l'appareil ne doit pas produire de brouillage, et
l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
this device may not cause interference, and
this device must accept any interference, including interference that may cause
4 / 4