SDV180 Quick Start Guide 1. Introduction on product parts 1 2 3 7 6 5 4 A/C adaptor Power bank 3. Introduction on normal use 1). Wi-Fi On / Off 2). Power On / Off 3). Recording button 4). TF card port 5). Micro-USB port 6). Reset button 7). Lens 2. Recharging This device can be recharging via USB cable & A/C adaptor or power bank and it is recommended to use rating 5V / 1.5A or above for this operation 2 1 3 5 4 1). Power on / off Power on: Press the Power button for seconds and red light turns on Power off: Press the Power button for seconds again and the red light will flash until turn off 2). Wi-Fi on / off Wi-Fi on: Press the Wi-Fi button, blue light turns on and it will flash when data transfer. Wi-Fi off: Press the Wi-Fi button again, blue light will turn off. 3). Recording Press the Recording button, it will start recording when red light flash; press the Recording button again, the recording stop. (In case of no card, full or any error, the red light will flash fast) 4). Recharging Connecting with USB cable & A/C adaptor, the Red light will turn on and recharging start; the Red light will turn off when recharging completed.
(The USB port is only for battery charging and not use for PC connection to transfer data.) 5). Reset Press this button and the camera will reset. 4. Camera App Smartphone system should be Android 5.0 or iOS 8 & above. Android users can download the App Ezzy360 from Google play store and iOS users can download the App Ezzy360 from App Store. 5. Camera Accessory 1. User Manual 6. Camera specification Lens: F2.0 FOV 190 Video format: 1920*1080(1080p) 30FPS Storage: MicroSDHC Input Current: 1.5A Input Voltage: 5V Operating Temperature: - 20~+70C Power: 1.8 Watt FCC Radiation Exposure Statement This device is also designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. This product has also been tested against this SAR limited. Warning Changes or modications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment ROHS This product is in compliance with Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011, on the restriction of the use of certain hazardous substances in electrical equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
o Reorient or relocate the receiving antenna. o Increase the separation between the equipment and receiver. o Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. o Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.