4 ZigBee Wireless & IR Unversal Remote Control KD-ZRC300 ZigBee Wireless 2.4 GHz & IR Universal Handheld Remote Control Product Link Key Features i 48 Programmable Hard Buttons: For IR and/or RF ZigBee commands programmable via USB on PC or Mac with Compass Navigator PC Software i Programming Support: Unlimited macro and variable actions i ZigBee Signal Transmission: Up to 100 through walls, doors and oors i Device Control: Up to 10 devices with line-of-sight IR control or RF Wireless 2.4 GHz ZigBee control i Backlight: Motion detected automatic backlighting. The backlight will turn on when movement is detected and will stay on for ve seconds after movement has stopped. i USB: Recharging and Programming i Multiple System Modes:
Idle Mode: Power Saving mode while remote is not in use Active Mode: Device switches to Active Mode after a button is pressed. Stays in Active Mode for 5 seconds. Low Battery Mode: Activated when the battery has dropped below 2.4V Conguration Mode: To setup and congure the remote i Indication Keys (On/Off):
Low Battery indicator: Power OFF LED blinks every one second while in active mode Battery Charging indicator: Power ON LED blinks every one second while in active mode Full Charge indicator: Both Power ON and OFF LEDs blink every one second while in active mode Conguration Mode indicator: Both Power ON and OFF LEDs are steadily illuminated i 7 Device Keys: The selected Device Key LED will remain illuminated to indicate which device is selected System Design Example ON OFF TV BRP CBX AVR SEC ATV L/S/H SELECT GUIDE MUTE PREV CH AV SHADES INT RADIO 2 5 8 0 B DVR
+
VOL ZOOM LIGHT AM/FM 1 4 7 A HEAT AUTO D EXIT
+
CH PC HVAC SURR 3 6 9 C COOL MENU Xbox One Satellite DVD Apple TV HDMI IR HDMI IR HDMI HDMI HDMI Audio IR ZigBee is a registered trademark of ZigBee Alliance. WiFi WiFi Router Ethernet RJ45 Climate KD-ZRX200 KD-MC1000 RF iPad KD-CSLX1 RS-232 Security Security RJ45 ON OFF TV BRP CBX AVR SEC ATV L/S/H Motion Sensor Lights Window Window S Sensor Motorized Shades KD-HDSW4x1Pro RS-232 Lighting RS-232 ZigBee RF DVR
+
VOL ZOOM LIGHT AM/FM 1 1 Cont.C Shades Controller Audio Receiver KD-ZRC300 7 7 4 4444 A HEAT SELECT GUIDE MUTE PREV CH AV SHADES INT RADIO 2 2 5 5 55 8 88 8 0 0 B AUTO D EXIT
+
CH PC HVAC SURR 3 6 9 C COOL MENU HDMI 5.1 Speaker System FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected. Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation IMPORTANT NOTE:
FCC RF Radiation Exposure Statement:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IMPORTANT Safety Instruction:
1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this equipment near water. 6) Do not using near any heat sources such as radiators, heat resisters, stove, or other equipment that produce heat.