|
app
s
|
Applicant Information
|
|
|
1 2 3 4 5 6
|
Effective |
2023-03-15
|
|
1 2 3 4 5 6
|
2023-01-04
|
|
1 2 3 4 5 6
|
Applicant's complete, legal business name |
Keyence Corporation
|
|
1 2 3 4 5 6
|
FCC Registration Number (FRN) |
0009419870
|
|
1 2 3 4 5 6
|
Physical Address |
1-3-14, Higashinakajima Higashiyodogwa-ku
|
|
1 2 3 4 5 6
|
1-3-14, Higashinakajima
|
|
1 2 3 4 5 6
|
Osaka, N/A
|
|
1 2 3 4 5 6
|
Japan
|
|
|
app
s
|
TCB Information
|
|
1 2 3 4 5 6
|
TCB Application Email Address |
L******@ul.com
|
|
1 2 3 4 5 6
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3 4 5 6
|
Grantee Code |
RF4
|
|
1 2 3 4 5 6
|
Equipment Product Code |
1675A
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3 4 5 6
|
Name |
K******** O********
|
|
1 2 3 4 5 6
|
Title |
Manager, Product Safety & Compliance Group
|
|
1 2 3 4 5 6
|
Telephone Number |
+81-6********
|
|
1 2 3 4 5 6
|
Fax Number |
+81-6********
|
|
1 2 3 4 5 6
|
E-mail |
o******@keyence.co.jp
|
|
|
app
s
|
Technical Contact
|
|
1 2 3 4 5 6
|
Firm Name |
UL Japan, Inc.
|
|
1 2 3 4 5 6
|
Name |
S****** M****
|
|
1 2 3 4 5 6
|
Physical Address |
4383-326 Asama-cho, Ise-shi
|
|
1 2 3 4 5 6
|
Mie-ken, 516-0021
|
|
1 2 3 4 5 6
|
Japan
|
|
1 2 3 4 5 6
|
Telephone Number |
81-59********
|
|
1 2 3 4 5 6
|
Fax Number |
81-59********
|
|
1 2 3 4 5 6
|
E-mail |
S******@ul.com
|
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 4 5 6 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 | No |
| 1 2 3 4 5 6 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 4 5 6 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 09/12/2023 |
| 1 2 3 4 5 6 | 07/05/2023 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 4 5 6 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 4 5 6 | Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 4 5 6 | DTS - Digital Transmission System |
| 1 2 3 4 5 6 | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 4 5 6 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Communication Module |
| 1 2 3 4 5 6 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 4 5 6 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 4 5 6 | Purpose / Application is for | Class II Permissive Change |
| 1 2 3 4 5 6 | Change in Identification |
| 1 2 3 4 5 6 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 4 5 6 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 4 5 6 | Grant Comments | Class II Permissive Change to add specific portable configuration host described in the filing. Power output listed is conducted. Single Modular Approval. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system: Handheld Code Reader HR-X500WB, HR-X300WB, HR-X100WB). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection. This device contains a Classic Bluetooth transmitter.
The highest reported SAR value is 0.67 W/kg: Body-worn. |
| 1 2 3 4 5 6 | Class II Permissive Change to add specific portable configuration host described in the filing. Power output listed is conducted. Single Modular Approval. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system: Handheld Code Reader HR-X500WB, HR-X300WB, HR-X100WB). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device contains a Classic Bluetooth transmitter.
The highest reported SAR value is 0.67 W/kg: Body-worn. |
| 1 2 3 4 5 6 | Class II Permissive Change to add specific portable configuration host described in the filing. Power output listed is conducted. Single Modular Approval. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Use in portable RF exposure conditions is limited to the specific product and antenna configuration evaluated in this filing (Host system: Handheld Code Reader HR-X500WB, HR-X300WB, HR-X100WB). When used in mobile applications except the conditions shown in this filing must be installed to provide a separation distance of at least 20 cm from all persons. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators and end-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device contains WLAN 802.11a/b/g/n transmitters.
The highest reported SAR value is 0.67 W/kg: Body-worn. |
| 1 2 3 4 5 6 | This application is the Change in ID, but not to affect original certificate: VPYLBEE5HY1MW. Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection. This device contains a Classic Bluetooth transmitter. |
| 1 2 3 4 5 6 | This application is the Change in ID, but not to affect original certificate: VPYLBEE5HY1MW. Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains WLAN 802.11a/b/g/n transmitters. |
| 1 2 3 4 5 6 | This application is the Change in ID, but not to affect original certificate: VPYLBEE5HY1MW. Power output listed is conducted. Single Modular Approval. This module is granted for use in mobile only configuration as described in this filing. Approval is limited to OEM installation only. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators and end-users must be provided with specific operating instructions for satisfying RF exposure compliance requirements. This device contains a Classic Bluetooth transmitter. |
| 1 2 3 4 5 6 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 4 5 6 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3 4 5 6
|
Firm Name |
UL Japan, Inc.(Ise)
|
|
1 2 3 4 5 6
|
MRT Technology (Suzhou) Co., Ltd.
|
|
1 2 3 4 5 6
|
Name |
T******** S********
|
|
1 2 3 4 5 6
|
M**** C******
|
|
1 2 3 4 5 6
|
Telephone Number |
81-59********
|
|
1 2 3 4 5 6
|
+86-5******** Extension:
|
|
1 2 3 4 5 6
|
Fax Number |
81-59********
|
|
1 2 3 4 5 6
|
E-mail |
T******@ul.com
|
|
1 2 3 4 5 6
|
m******@mrt-cert.com
|
|