96M17044 Precautions on Regulations and Standards Precautions on wireless LAN RFID Unit DX-RH1/RH1GA DX-RM1/RM1GA Instruction Manual Be sure to read this instruction manual carefully prior to operating this product. After reading, keep this manual in a safe place so that you can refer to it at any time. Symbols The following symbols alert you to important messages. Be sure to read these messages carefully. DANGER WARNING CAUTION NOTICE Indicates a hazardous situation which, if not avoided, will result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in death or serious injury. Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. Indicates a situation which, if not avoided, could result in product damage as well as property damage. Important Indicates cautions and limitations that must be followed during operation. Point Indicates additional information on proper operation. UL Certificate Reference Indicates tips for better understanding or useful information. Company names and product names described in this manual are registered trademarks or trademarks of each company. It is prohibited to use or copy all or any part of this manual without prior approval. The information contained in this manual is subject to change without notice. Safety Precautions General cautions DANGER Do not use this product for the purpose of protecting a human body or a part of a human body. This product is not intended for use as an explosion-proof product. Do not use this product in a hazardous location and/or potentially explosive atmosphere. Do not use this product in an application that may cause death, serious injury, or serious property damage due to a failure with this product occurring, such as nuclear power plants, on aircraft, trains, ships, or vehicles, used within medical equipment, playground equipment, roller coasters and other rides, etc. WARNING If the product is used in a manner not specified by the manufacturer, the protection provided by the product may be impaired. Be sure to check that this product performs properly before starting the work or operation. CAUTION We recommend that you take substantial safety measures to avoid any damage in the event of a problem occurring. Do not use this product in a manner not specified herein. Doing so may result in fire, electric shock, or malfunction. NOTICE Do not modify this product or use it in any way other than described in the specifications. Otherwise, the functions and performance cannot be guaranteed. Handling of DX-RH1/RH1GA/RM1/RM1GA NOTICE Do not use this product with devices other than the DX Series. The DX-RH1/RH1GA/RM1/RM1GA or the other device may be damaged. CAUTION Handling of rechargeable battery (DX-BC6) WARNING Observe the following precautions during use. Failure to do so may result in heat generation, smoke generation, fire, explosion, battery leakage, gas leakage, etc. of the rechargeable battery pack. Only use the specified battery. Do not charge, use, or store the rechargeable battery at locations of high temperature above the specified rangesuch as near fire, in a heated car, and under the scorching sunor at locations of low temperature below the specified range. Do not put it into fire or subject to heat. If there is battery leakage or abnormal smell, immediately take it away from fire. Do not drop the rechargeable battery or subject it to strong pressure
(such as by crushing, bending, deforming, making holes in, cutting, or throwing it). WARNING Remove the rechargeable battery of the DX-RH1/RH1GA/RM1/RM1GA near locations where using wireless devices is banned at medical institutions or near electric devices for medical purposes. Carry and use the product away from an implanted cardiac pacemaker. For details, see the website of the Ministry of Internal Affairs and Communications of Japan. Important Communication may be impossible at locations near metallic objects, locations surrounded with metallic walls, where there is a lot of metallic powder, and in similar usage environments. Be sure to check whether communication is possible prior to installation. If this product is used near devices with the same frequency band, radio wave interference may occur and the communication speed may become slow or communication may become impossible.
[Japan]
The DX-RH1/RM1 has obtained construction design certification according to the Radio Act of Japan. Never disassemble or modify this device. Doing so is prohibited by the Radio Act. If other radio stations are subject to radio wave interference from this unit, immediately stop the electric wave generation, and then contact the below phone number in regard to taking necessary measures (e.g. setting a partition) to avoid interference. KEYENCE Corporation, +81-6-6379-1151 l a u n a M n o i t c u r t s n I
[Japan]
Land mobile station application Important The DX-RH1 uses electric waves in the UHF band (920 MHz), which is categorized for land mobile stations having high output (antenna power of 1 W or less). Therefore, when using the DX-RH1, an application to use the device as a premises radio station or land mobile station must be made to the Ministry of Internal Affairs and Communications of Japan. For details, see the website of this ministry. Failure to obtain written notification of radio station registration or to report the installation of such a station is a violation of the Radio Act. The DX-RH1GA/RM1GA complies with the following UL and CSA standards and has been certified by UL. UL File No. Category Applicable standards UL 62368-1 E167973 AZOT/AZOT7 CAN/CSA-C22.2, No. 62368-1 Be sure to consider the following specifications when using this product as a UL certified product. Use this product in combination with the DX-BC6 which has obtained UL certification. CAUTION Replacing the battery with an incorrect type presents an explosion hazard. Dispose of used batteries according to the instruction manual. FCC Regulations This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions; (1) This device may not cause harmful interface, and (2) this device must accept any interference received, including interference that may cause undesired operation. Application regulation FCC Part 15 Subpart B Class A FCC Part 15 Subpart C The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. The DX-RH1GA/RM1GA only has been tested and found to comply with FCC radiation exposure limits set forth for controlled environments and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his/her own expense. FCC CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. 1 DX-RH1/RM1 IM GB ISED Regulations This device complies with the following regulations specified by the ISED. Applicable regulation Specifications CAN ICES-003 (A) / NMB-003 (A) RSS-247 RSS102 The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. The DX-RH1GA/RM1GA only has been tested and found to comply with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. Les connaissances scientifiques dont nous disposons nont mis en vidence aucun problme de sant associ lusage des appareils sans fil faible puissance. Nous ne sommes cependant pas en mesure de prouver que ces appareils sans fil faible puissance sont entirement sans danger. Les appareils sans fil faible puissance mettent une nergie radiolectrique (RF) trs faible dans le spectre des micro-ondes lorsquils sont utiliss. Alors quune dose leve de RF peut avoir des effets sur la sant (en chauffant les tissus), lexposition de faibles RF qui ne produisent pas de chaleur na pas de mauvais effets connus sur la sant. De nombreuses tudes ont t menes sur les expositions aux RF faibles et nont dcouvert aucun effet biologique. Certaines tudes ont suggr quil pouvait y avoir certains effets biologiques, mais ces rsultats nont pas t confirms par des recherches supplmentaires. Le DX-RH1GA / RM1GA uniquement a t test et jug conforme aux limites dexposition aux rayonnements nonces pour un environnement non contrl et respecte les rgles dexposition aux frquences radiolectriques (RF) CNR-102 de lIC. This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. CAUTION Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Checking the Package When opening the package, check that the following items are all included. In the event of missing, defective, or damaged items, contact your nearest KEYENCE sales office. DX-RH1/RH1GA Main unit...1 Battery attachment cover...1 Instruction Manual...1 Model DX-RH1/RH1GA
(RFID high-output unit) DX-RM1/RM1GA
(RFID medium-output unit) 2-color LED Operations Hard keys Trigger key 1 Front keys 27 ISO/IEC 18000-6 Type C (EPC Global Class 1 Gen 2) DX-RH1: 916.8 - 920.8 MHz DX-RH1GA: 902.75 -927.25 MHz 1 W or less DX-RM1: 920.6 - 923.0 MHz DX-RM1GA: 902.75 - 927.25 MHz DX-RM1: 250mW or l ess DX-RM1GA: 500mW or less Type Dedicated lithium ion battery pack (DX-BC6) Power supply Capacity 6270 mAh Charging time Approx. 7 hours Interface Supported (charging/communication)
* Connected to DX-UC4E, DX-UC1UL, DX-UC1M, or OP-88604
(magnetic charging cable) 20C to +50C, when charging 0C to +40C Display Charging confirmation LED RFID Supported tags Frequency range Transmission output Magnetic connector Ambient operating temperature Ambient operating humidity Ambient storage temperature Ambient storage humidity Environmental resistance 20% to 85% RH (no condensation) 20C to +60C (no freezing) 20% to 85% RH (no condensation) Dimensions 182.1 100 152.4 mm 222.4 x 70.6 x 50 mm Weight Approx. 405 g Approx. 205 g DX-RM1/RM1GA Main unit...1 Battery attachment cover...1 Instruction Manual...1 DX-RH1/RM1 IM GB 2 Outline Dimensional Drawings DX-RH1/RH1GA 152.4 Unit: mm 100 DX-RM1/RM1GA 50 70.6 Unit: mm 1
. 2 8 1 4
. 2 2 2 3 DX-RH1/RM1 IM GB WARRANTIES AND DISCLAIMERS
(1) KEYENCE warrants the Products to be free of defects in materials and workmanship for a period of one (1) year from the date of shipment. If any models or samples were shown to Buyer, such models or samples were used merely to illustrate the general type and quality of the Products and not to represent that the Products would necessarily conform to said models or samples. Any Products found to be defective must be shipped to KEYENCE with all shipping costs paid by Buyer or offered to KEYENCE for inspection and examination. Upon examination by KEYENCE, KEYENCE, at its sole option, will refund the purchase price of, or repair or replace at no charge any Products found to be defective. This warranty does not apply to any defects resulting from any action of Buyer, including but not limited to improper installation, improper interfacing, improper repair, unauthorized modification, misapplication and mishandling, such as exposure to excessive current, heat, coldness, moisture, vibration or outdoors air. Components which wear are not warranted.
(2) KEYENCE is pleased to offer suggestions on the use of its various Products. They are only suggestions, and it is Buyer's responsibility to ascertain the fitness of the Products for Buyers intended use. KEYENCE will not be responsible for any damages that may result from the use of the Products.
(3) The Products and any samples ("Products/Samples") supplied to Buyer are not to be used internally in humans, for human transportation, as safety devices or fail-safe systems, unless their written specifications state otherwise. Should any Products/Samples be used in such a manner or misused in any way, KEYENCE assumes no responsibility, and additionally Buyer will indemnify KEYENCE and hold KEYENCE harmless from any liability or damage whatsoever arising out of any misuse of the Products/Samples.
(4) OTHER THAN AS STATED HEREIN, THE PRODUCTS/SAMPLES ARE PROVIDED WITH NO OTHER WARRANTIES WHATSOEVER. ALL EXPRESS, IMPLIED, AND STATUTORY WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF PROPRIETARY RIGHTS, ARE EXPRESSLY DISCLAIMED. IN NO EVENT SHALL KEYENCE AND ITS AFFILIATED ENTITIES BE LIABLE TO ANY PERSON OR ENTITY FOR ANY DIRECT, INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL OR CONSEQUENTIAL DAMAGES (INCLUDING, WITHOUT LIMITATION, ANY DAMAGES RESULTING FROM LOSS OF USE, BUSINESS INTERRUPTION, LOSS OF INFORMATION, LOSS OR INACCURACY OF DATA, LOSS OF PROFITS, LOSS OF SAVINGS, THE COST OF PROCUREMENT OF SUBSTITUTED GOODS, SERVICES OR TECHNOLOGIES, OR FOR ANY MATTER ARISING OUT OF OR IN CONNECTION WITH THE USE OR INABILITY TO USE THE PRODUCTS, EVEN IF KEYENCE OR ONE OF ITS AFFILIATED ENTITIES WAS ADVISED OF A POSSIBLE THIRD PARTYS CLAIM FOR DAMAGES OR ANY OTHER CLAIM AGAINST BUYER. In some jurisdictions, some of the foregoing warranty disclaimers or damage limitations may not apply. BUYER'S TRANSFER OBLIGATIONS:
If the Products/Samples purchased by Buyer are to be resold or delivered to a third party, Buyer must provide such third party with a copy of this document, all specifications, manuals, catalogs, leaflets and written information provided to Buyer pertaining to the Products/Samples. E 1101-3 DX-RH1/RM1 IM GB Copyright (c) 2021 KEYENCE CORPORATION. All rights reserved. 17044GB 2121-1 96M17044 Printed in Japan 4