ASSEMBLY INSTRUCTIONS ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE INTENDED FOR RESIDENTIAL USE ONLY. PARTS LIST XPS001W
PART NO. MATERIAL CODE PART QTY PART NO. MATERIAL CODE PART QTY 1 18160401003 1 2 18160105002 1 Music Speaker Battery Device vice Step 1:
Pull out the battery device (#2) and then install 3 AAA batteries. FIGURE 1 1 Press 2 2 Back Side 2
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required. Keep children away during assembly. This item contains small parts that can be swallowed by children. Children should always be under direct adult supervision while using this product. Retain these assembly instructions for future reference. Quote the following FQC NO. when contacting the service center. SERVICE CENTER TOLL FREE NO. TEL: 1-877-539-7436 FAX: 1-877-539-7439 PAGE 1 OF 3 COURTYARD CREATIONS INC. FIGURE 2 push 2 1 Release Step 2:
Slide the music speaker (#1) onto the umbrella pole and then insert the battery device (#2). FIGURE 3 Cleaning and Maintenance To prolong the life and beauty of your music speaker, remove the batteries and store it indoors during long periods of non-usage or in any inclement weather. Warranty This product is covered by Courtyard Creations Inc. oneyear limited warranty. Proof of purchase (dated register receipt) is required for warranty claims. It remains the customers responsibility for freight and packing charges to and from the service center. STOP!
Missing A Part?
No Need To Go Back To The Store The store where you made your purchase does not stock parts for this item. If you need parts, whether they are missing or damaged, Call Toll Free:
TEL: 1-877-539-7436 FAX: 1-877-539-7439 Call us between 9:00 AM and 4:30 PM Eastern Time Monday through Friday For further assistance, please visit us at service.cci@polywares.com READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU HAVE ALL OF THE PARTS LISTED. IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME SEPARATED DURING SHIPMENT. IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT 1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE. PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT. 2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS LIST. MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS PRODUCT TO THE RETAILER. PAGE 2 OF 3 Umbrella Bluetooth Speaker with LED Lights Umbrella Bluetooth Speaker with LED Lights
6SHDNHUVSURYLGHJUHDW STEREO SOUND
/('OLJKWVVRIWO\LOOXPLQDWH\RXUWDEOH
&RQQHFWLQJLVDVHDV\DV
:RUNVZLWK$1<GHYLFHZLWK
%OXHWRRWKFRQQHFWLYLW\
1 QUICK SET UP GUIDE
1 Turn on unit by pushing the On / Off button.
,QWKH%OXHWRRWKVHWXSRQ\RXUGHYLFH
VHDUFKDQGOLQN0XVLF8PEUHOOD
/LVWHQIRUWKHPXVLFWRQHZKLFKOHWV\RXNQRZ
WKDW\RXDUHFRQQHFWHG
ENJOY!
[$$$
RECHARGABLE BATTERIES WATER RESISTANT NO TOOLS REQUIRED STEREO SOUND
%atteries soOG separately
6SHFLILFDWLRQRI3URGXFWV 6SHDNHU6L]H
+LQ
&RQIRUPVWR%OXHWRRWK96SHFLILHG7UDQVPLVVLRQ'LVWDQFHPRU
32ft (the transmission distance varies due to different environments and Bluetooth equipment of cell phones) 3RZHU:
3RZHU6XSSO\GU\EDWWHU\$$$
Solutions to Common Speaker Phenomenon Problems Solutions Several unsuccessful connection attempts Volume too low or sound distorted. Discontinuous sound when music playing Indicator will not turn on Ensure the speaker is in standby mode and turn off connections with other Bluetooth devices. Check the volume setting and adjust the volume appropriately. Move the speaker closer or remove obstacles between the speaker and your music playing device. Check batteries. LED Button On / Off Button Important Notes 4
5HDGDOORIWKHLQVWUXFWLRQVFDUHIXOO\
&RPSO\ZLWKDOORIWKHLQVWUXFWLRQV
&OHDQWKHSURGXFWZLWKDGU\FORWK
'RQRWSODFHWKHSURGXFWLQDKXPLGHQYLURQPHQW
'RQRWSODFHWKHSURGXFWLQDQ\OLTXLG
'RQRWLQVWDOOWKHSURGXFWQHDUDKHDWVRXUFHVXFKDVUDGLDWRUKHDWHU
furnace, or other heating equipment.
5HPRYHEDWWHULHVZKHQQRWLQXVHIRUH[WHQGHGSHULRGVRIWLPH
'RQRWDWWHPSWWRPRGLI\WKHSURGXFWLQDQ\ZD\
'RQRWPL[ROGDQGQHZEDWWHULHV
'RQRWPL[DONDOLQHVWDQGDUGFDUERQ]LQFRUUHFKDUJHDEOH
(ni-cad, ni-mh, etc.). PAGE 3 OF 3 FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital, pursuant to Part 15 or the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not in stalled and used in accordance with the instructions, may casue harmful interference to radio communications, However, there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
--- Reorient or relocate the receiving antenna.
--- Increase the separation between the equipment and receiver.
--- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
--- Consult the dealer or an experienced radio/ TV technician for help. FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth or an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, Human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation Industry Canada Notice This device complies with Industry Canada licence-exempt RSS standard(s). 1. Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interferencethat may cause undesired operation of the device."
2.Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Avis d'Industrie Canada Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Cet appareil numrique ne d passe pas les Rlements sur l'interfrence radio par un appareil num rique de classe B stipules dans les Rglement sur l'interfrence redio d'industrie Canada.