fa Technical Support DC306(A) Function Description
: You can choose single channel (0305(4/0), five channels(oc306/e)). Each indicator light means one control inl Transifitina trecueney: channel, Press channel choose button Pr-(indicator move left side) or P1+(indicator move right side) to change the channel, On the analogy of this, loose finger when the indicator light move to suitable channel that you select 433MHz effective channel, All indicator lights flash that means all channels is effective(group control state). I Transmitting power: 10 milliwatt I Operating temperature: 20C ~ + 55C I Transmssion distance: 200 meters open office I Input voltage: 3V(CR2430) Transm Transmitter: You can choose nine channels (0c107V) fifteen channels@cm~We/e). One number of LCD screen means one control channel. Press"channel choose"button P1-number descending) or P1+(number increasing) to change the channel. On the analogy of this,loose finger when the indicator light move to suitable channel that you select effective channel, If LCD screen number show o that means all channels if effective(group control state), 35 meters on two walls I Notice: transmitter Do not exposed to moisture and strike, so as not to affect life, When you use transmitter, if found emission distance obviously short or less sensitive, please change another same new battery, Please have batteries for recycling, Matchable R Tubular Motor Set up Each time, the interval of pressing different Delete all the datas of the motor buttons must within 4 seconds when you and the new emitter has re-setting all instructions,otherwise the been programmed, system will restore the original state.
bf
==> |< mmm OK (the tise code-setting) Additional Function Set up is ok Js Sound from motor Press up button The up limit button control Hear long sound onetite the motor clockwise
==> SNe
Hear long sound yo Heardidi. switch on continue to press => p> K tthe second code-setting) setting button two times (P2) Set up is ok The down limit button control Press down button the motor clockwise one time The interval of different button xX: receiver store 20 emitters channels. must within 10 seconds for all 7 most, and one channel of emitter can control 20 receivers at most. Matchable DC227/DC228 setting, otherwise the system Tubular Motor Set up will restore the original state Additional Function
- \ i Sk we ae * -
=> \ => = > = > = > |) = a> ok ve Setting is ok Switch on Press the receiver See indicator Press the receiver See the receiver indicator Press the UP. See indicator flashing Programming key flashing the STOP button long flashing limit button of and extinguished transmitter Matchable DC136 Tubular Motor Set up THEine sl of altferen: buuron One receiver store 20 emitters channels ruse Wlehin 30 seconde fori at most, and one channel of emitter setting, otherwise the system will y 7 rasore eotiginal states can control 20 receivers at most. a GB a
prog 8 2 . 4 switch on See the receiver See green indicator flashing green indicator and extinguished Tong flashing Additional Function Y)
=> ok Setting is OK Press the receiver programming key See green indicator flashing Press the UP limit button of transmitter Press the STOP button of receiver Control Syste!
Pa (eae! controls support 433MHz s s Ry All controls support 3V(cR2430) YS LK |
Specific parameters to the nameplate shall prevail ce Emitter Specification Version No.: A/os Type Specification Setting button DC306(A) DC306(A) FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to cperate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.