Quickstart |
Interface Diagram RGB LED Indicator USB-C Color RGB LED Indicator Illustrate Status Bluetooth Disconnected Bluetooth Connected SBC AAC aptX / aptX LL aptX HD LDAC Motion Blue
(Flashing) Blue
(Breathing) Yellow
(Breathing) Green
(Breathing) Turquoise
(Breathing) Purple
(Breathing) White
(Breathing) Erase Paring Record White
(Triple Flash) Setup Guide 1 Power On Plug BT Magic into the USB-C (I2S) port, then turn on the Tone2/Tone2 Pro. BT Magic will automatically turn on. 2 Bluetooth Pairing
(1) Set Tone2/Tone2 Pros input mode to I2S.
(2) Look for BT Magic in your smartphone or tablets Bluetooth pairing list. Tap on it to pair. Wireless BT Magic Wireless BT Magic 3 4 Music Playback After pairing with your device, the RGB indicator will show a blue breathing light. BT Magic is now ready for music playback. Power Off When Tone2/Tone2 Pro is turned off, BT Magic will turn off too. In this case, the RGB indicator light will turn off. Specifications Bluetooth ChipQualcomm QCC5125 Bluetooth StandardBluetooth 5.1 Sample RateUp to 24bit 96KHz LEDRGB LED ConnectivityUSB-C Bluetooth FormatsSBC/AAC/aptX/aptX-LL/aptX-HD/LDAC CompatibilityKhadas Tone2/Khadas Tone2 Pro FAQ How to erase Bluetooth pairing history?
With BT Magic plugged-in and Tone2/Tone2 Pro powered off (USB cable with 5V power still plugged-in), long-press the volume knob for 5 seconds to Clear Bluetooth Paring Record. BT Magics RGB indicator will flash white 3 times during this process. Whats In The Box BT Magic * 1pcs Instruction Manual * 1pcs Warranty Card * 1pcs This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. FCC ID:2A8Q4-BTM Manufacturer: Khadas Technology Co., Ltd. Tel: +86 755 2307 6626 E-mail: support@khadas.com Address: Room 2709, Floor 27, Qiancheng Center, Haicheng Road, Xixiang Street, Bao'an District, Shenzhen
+86 755 2307 6626 : support@khadas.com 52709 www.khadas.com