TRUE WIRELESS STEREOBUDS User Manual FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement
.Thedevicecanbeusedinportable exposureconditionwithoutrestriction Made in China FCC ID: 2AURO-KCL-EBT001 PACKAGE INCLUDED INTRODUCTION 2 Wireless Earbuds 1 Charging Case Extra S/L Ear Caps 1 Type-C USB Cable TRUE WIRELESS EARBUDS W1 PRO User Manual Use Manual Battery Indicator for charging case Charging Pins on Case Charging Pins on Earbuds HOW TO WEAR Charging Indicator for earbuds Multifunction touchpad 1.Insert the earbuds into the inner canal of your ears. Turn and find the most comfortable 2. position. 1 2 TURN ON / OFF AThe earbuds switch on automatically when taken out of the charging case. BThe earbuds switch off automatically when placed back in the charging case. SPECIFICATIONS Wireless Version Chip Type Earbud Battery One Earbud Weight Charging Time for Earbud Music Playing Time Talking Time Standby Time
(including charging case) Charging Case Battery Charging Time for Case Charging Earbuds Times Operation Range Total Weight Pairing Name Waterproof Level V5.0 Qualcomm QCC3020 40mAh Li-polymer Battery 4.5 g/0.16 oz 1-1.5 H 6-8H
(varies by volume level and content) 3-4H 300H 250mAh Li-polymer Battery 1-1.5 H 3 Times Up to 33 ft/10 m 43 g/1.51 oz W1-L/R IPX 5 Note: the time mentioned above may vary due to users operation mode and device setting. Power on:
3 4 PAIRING 3. You can use both earbuds simultaneously or independently
(one in ear and one charging), just take all out for both use or one earbud for single use. to activate it, and then take it out from the case. the earbuds will automatically power on. Both earbuds search the BT device named W1-L or W1-R and click to connect separately. You will hear a voice prompt Connected once pairing successfully. 2. For IOS or Android phone, you will see each below Pop-ups Bluetooth Pairing Request Headsetwould like to pair with your iPhone. Cancel Pair
(Apple Device) Bluetooth Pairing From:
W1-L / W1-R Pair up with the device?
Cancel Pair
(Android Device) 5 W1 PRO 4. Re-connection: After earbuds connect with the phone successfully, every time the earbuds are taken from the charging case, it will automatically connect with the last connected phone. Note:
1. The earbuds will automatically power off if they dont connect the device in 10mins. 2. The earbuds will be disconnected if beyond signal range. They will automatically reconnect the device if back in working range in 30 seconds, otherwise you need manually tap the touchpad once for reconnection and then tap once for normal playing, it will power off if they dont connect the device in 10mins. 3. If the earbuds didnt pair successfully on current device, please delete the previous pair record on your last device , put both earbuds back to charging case. Then pair them again like previous steps. 6 RESET CONTROLS W1 PRO Tap Once Play/Pause 9 9 Reset the earbuds if you can only hear one earbud or earbuds cannot connect to your device. 1. Put both earbuds back to charging case and close the charging case cover. Delete the W1-RW1-L from the device pairing record. Then take the earbuds out again. 2. Press both earphones for 9 times to restore the factory Settings. After hearing the prompt sound, the green light pairing is successful. 3. Turn on the BT on your device and select W1-R/W1-L to connect. 2 2 Tap the right touchpad twice Next Track Tap the left touchpad twice Previous Track Tap and hold the touchpad for 2 seconds Volume up(R) Tap and hold the touchpad for 2 seconds Volume down(L) 7 8 Tap Once Answer call Tap twice End call/Reject call 3 Tap touchpad three times Activate Siri/other voice control assistant. CHARGING To preserve battery lifespan, please fully charge it once a month if not used for a long time. Green means charging case has enough power level (>20%);
Yellow means less than 20%
power level Steady Red---Charging Off-Fully Charged Charging case indicator (connected to power source) Flashing green Steady green Charging Fully charged Earbud status indicator (in charging case) Low battery Charging Fully charged Flashing red Steady red Off 9 10 TROUBLESHOOTING SAFE TIPS Problems Possible Causes Can not turn on Low battery power of earbud The media volume of mobile phone is adjusted to minimum/
noisy environment No sound or low voice when calling Earbud cannot charge/no indicator light when charging Low battery of charging case /
charging pins not connected Disconnected sometimes or there are lags when calling or listening music Low battery of earbuds/beyond operation range/
strong signal interference Turn off automatically No LED indicator when charging case Low battery No power supply Pairing failure Not follow the pairing steps 11 Solutions Charge earbuds for about 1.5H Turn up volume of mobile phone or eardus/change a different place Charge both the case and earbuds for about 3.5H/adjust earbud position, ensure charging pin be well connected. Recharge earbuds/
the device shall be close to earbuds/
change another place. Recharge earbuds for 1.5H Ensure the Type-C USB charging cable is plugged well. Put the earbuds to charging case and pair it again. please keep the earbuds within 1 meter range from the device. 1. Please read this manual carefully about how to properly 2. Fully Charge the earbuds along with the charging case 3. Keep the earbuds away from children or pets to avoid accidental ingestion. 4. Do not use the earbuds at a high volume for long-tem use which may cause hearing injury. 5. Do not use output larger than 5V 1A charger which may damage battery. 6. 12