FCC ID: NY3RBW322MES RPW414-FTL-902-ALC

Operating Instructions RBW322-FTL-902 Room Control Module Issue 2015-01-09 2 Content Page General Information. 4 1 Information on the operating instructions . 4 1.1 1.1.1 Validity and storage of the operating instructions . 4 1.1.2 Copyright . 4 1.1.3 As an operator, what can you do?. 4 1.1.4 Customer service. 5 1.1.5 Notes on presentation in these instructions. 5 1.2 Scope of Delivery . 5 2 2.1 2.2 2.3 2.4 3 3.1 4 4.1 4.2 4.3 5 6 6.1 6.2 Safety . 5 Presentation and structure of warnings . 5 Classification of warnings . 6 Intended use . 6 Responsibilites of the Operator . 7 Equipment Description . 7 Components . 8 Packaging, transportation and storage . 8 Packaging . 8 Transportation . 9 Storage . 9 Operating Modes . 9 Controls and Display . 9 Controls . 10 Indicators on the display . 11 Operations and Settings . 12 7 Summer mode . 12 7.1 Operating Menu. 12 7.2 7.2.1 Selecting the operating menu . 12 7.2.2 Setting the setpoint . 12 7.3 Configuration Menu . 13 7.3.1 Selecting the configuration menu . 13 7.3.2 Setting party mode (usage time extension) . 13 7.3.3 Setting vacation mode . 14 Setting the vacation start . 14 Issue 2015-01-09 3 Setting the vacation end. 14 Setting the setpoint . 15 Ending an active vacation mode early . 15 Deleting an inactive vacation mode . 15 7.3.4 Setting the weekly schedule. 15 Deleting a usage time . 16 7.3.5 Setting the setpoints for comfort mode and economy mode . 17 7.3.6 Setting the time and date . 17 7.3.7 Setting the time, temperature or setpoint as the initial display. 18 Setting the 12/24 hour mode . 18 Switching the temperature units between F/C. 19 8 8.1 8.2 9 Maintenance and Cleaning . 19 Maintenance. 19 Cleaning . 19 Malfunctions . 19 Decommissioning, Removal and Disposal. 21 10 10.1 Decommissioning. 21 10.1.1 Selecting the service menu . 21 10.1.2 Restoring factory settings. 21 10.2 Removal . 22 10.2.1 Screw mounting . 22 10.2.2 Adhesive mounting. 22 10.3 Disposal . 23 Technical Specifications. 24 11 Technical data . 24 11.1 Dimensions . 25 11.2 11.3 Wireless interface. 25 11.4 Type plate . 26 12 13 Appendix . 27 Contact data. 28 Issue 2015-01-09 4 General Information 1 General Information 1.1 Information on the operating instructions These operating instructions contain information on the RBW322-FTL-902 and informa-

tion on the safe installation, commissioning, handling and correct operation of the device. The operating instructions are intended for all persons who operate the RBW322-FTL-902 for the purpose of increasing the reliability and the service life of the device; it should also help prevent hazards, downtime and possible exclusion of warranty claims. Each person who carries out work on the RBW322-FTL-902 must have read and under-

stood these operating instructions. If you have any questions that are not resolved by these operating instructions, you can obtain further information from the supplier or manufacturer. 1.1.1 Validity and storage of the operating instructions These operating instructions are an integral part of the RBW322-FTL-902 and apply exclusively to this device. Keep the operating instructions in the immediate vicinity of the device throughout the entire service life of the RBW322-FTL-902. The operating instructions must be passed on to any subsequent owners or users. 1.1.2 Copyright The duplication (even extracts thereof), removal or transfer of content is not allowed without the manufacturers written permission. 1.1.3 As an operator, what can you do?

You may only perform the following actions on the device:

Setting the setpoint Setting party mode (usage time extension) Setting vacation mode Setting the weekly schedule Deleting a usage time Setting the setpoints for comfort mode and economy mode Setting the time and date Setting the 12/24 hour mode Switching the temperature units between F/C Maintenance and Cleaning Contacting customer service in case of Malfunctions Decommissioning, Removal and Disposal Issue 2015-01-09 Safety 5 NOTE Mounting, installation, commissioning and troubleshooting may only be performed by a service technician. Improper changes by the operator can lead to malfunctions and reduce the service life of the device. 1.1.4 Customer service If problems occur, if you have questions or if you require technical information, please contact your service technician. 1.1.5 Notes on presentation in these instructions Notes contain supplementary information:

NOTE Indicates additional information and important details that can simplify use of the device. List symbols Additional icons are presented in the text to help you follow the operating instructions:

Indicates a list item. Indicates a step that must be performed. 1.2 Scope of Delivery The standard scope of delivery includes:

RBW322-FTL-902 room control module (incl. batteries) Holding plate Adhesive pad Installation note: RBW322-FTL-902 2 Safety Always observe the following in order to operate the RBW322-FTL-902 room control module correctly and safely:

Read all warnings in these operating instructions in order to prevent injuries and damage to the device or any equipment connected to it. To avoid potential hazards, use the device only as described in the operating instruc-

tions. Observe the described actions and warnings in these operating instructions. Observe the instructions and warnings in the applicable documents. 2.1 Presentation and structure of warnings Hazardous situations are displayed with warnings and safety instructions in these oper-

ating instructions. Hazard symbols and signal words convey the severity of the hazard. Issue 2015-01-09 6 Safety The warnings are action-related and are structured as follows. CAUTION Type/source of danger!

Possible consequences. Preventative measures. 2.2 Classification of warnings Warnings are classified according to the severity of the hazard. Hazard levels with their corresponding signal words and warning symbols are described in the following:

The CAUTION signal word is used for situations that could result in moderate or minor injuries. CAUTION The NOTICE signal word is used for situations that could result in damage to the device. NOTICE 2.3 Intended use Observe the following to operate the device correctly:

Do not operate the device in wet or moist environments. Do not operate the device in a potentially explosive environment. Do not open the device. Only operate the RBW322-FTL-902 when it is in original condition. Modifications to the device could result in unforeseeable dangers and are thus prohib-

ited. Issue 2015-01-09 Equipment Description 7 2.4 Responsibilites of the Operator The device may only be operated if it is technically sound and in safe working order. The operator must observe the following items:

Ensure that mounting, installation and commissioning are only performed by service technicians. Ensure that these operating instructions are available to the user. Make sure that the user has read the operating instructions before starting work with the RBW322-FTL-902. If the device becomes damaged or if a malfunction message is issued (except when batteries are changed in the MD15-FTL-902 radio partner), you must inform your service technician. 3 Equipment Description You can use the RBW322-FTL-902 room control module to measure the room temperature in resi-

dential or commercial buildings, and to wirelessly transfer measured values, occupancy, setpoints and weekly schedules to the MD15-FTL-902 radio small actuator. You can manually set or permanently define a desired setpoint in the device for specific usage or non-usage periods (weekly schedule). After the RBW322-FTL-902 has measured the room temperature, the device wirelessly transmits the desired room temperature to the MD15-FTL-902. This controls the room temperature via the radiator valve. Issue 2015-01-09 8 3.1 Components Packaging, transportation and storage 01 02 03 05 04 06 08 09 07 01 02 03 04 05 06 07 08 09 Display Setting knob Solar cell Occupancy button Holding plate Holding bar Adhesive pad Reset interface Diagnostics interface Displays information on the current status of the RBW322-FTL-902/MD15-FTL-902 functional unit. For switching on the device for the first time and for selecting values. Generates energy for device operation Select between Present and Absent Fastens the device to the wall. Secures the device to the holding plate. Sticks the holding plate to even surfaces. Restore factory settings. 4 Packaging, transportation and storage 4.1 Packaging Unpacking The device is delivered in a cardboard box. When unpacking it, proceed as follows:

Carefully remove the device from the packaging making sure you do not damage it. Dispose of the packaging material according to local regulations. Repackaging If you wish to repackage the device for transportation (e.g. for sending a device to the manufacturer), observe the following points:

Select an appropriate material for the packaging. The packaging must not be too large or too small. Use packing material to prevent the device from sliding. Carefully close and seal the packaging. Issue 2015-01-09 Operating Modes 4.2 Transportation If you wish to send or transport a device, proceed as follows:

Transport the device in appropriate packaging. Do not throw or toss the packaged device. Do not drop the device. 4.3 Storage 9 If you wish to store the packaged device for a long period of time, you must observe the following:

Ensure that the environment is dry. Only store the device indoors. Store the device in a dust-free environment. Protect the device from bumps and mechanical damage. 5 Operating Modes Because individual rooms are used in different ways, it is important to control the room temperature according to the particular usage in order to conserve energy. Rooms that are used in different ways need individual temperature profiles. There are three different operating modes available that enable you to set a specific room temperature:

Comfort mode:

Operating mode for a room that is in use (usage status: Present). The controller operates with the specified comfort setpoint. This setpoint is set to a comfortable room temperature. Economy mode: Energy-saving operating mode (usage status: Absent/economy mode) for a room that is not in use. The controller operates with a predefined lowered or reduced setpoint. Summer mode:

In this operating mode, only economy mode is active. See para-

graph "Summer mode", page 12. In the configuration menu of RBW322-FTL-902 Room Control Module you can set the type and date of the operating modes you want to use. See chapter 7.3 Configuration Menu, page 13. 6 Controls and Display RBW322-FTL-902 and MD15-FTL-902 operate automatically. Basic settings are performed on the RBW322-FTL-902 room control module only. Issue 2015-01-09 10 6.1 Controls Controls and Display 1 1 Setting knob 4 3 2 Turn: Set value (e.g. setpoint). Turn counterclockwise: Reduce value. Turn clockwise: Increase value. Press (2 seconds): Change menus or Press (briefly): Set setpoint or confirm display settings Occupancy button Switch between Present (comfort mode) and Absent Display

(economy mode). Displays information regarding the device status. Solar panel Generates electrical energy for device operation. 2 3 4 NOTE If the occupancy button is switched to Absent or economy mode during an active usage time, economy mode is active until the next switching point (start time) for comfort mode or until the occupancy button is pressed again. Issue 2015-01-09 Controls and Display 6.2 Indicators on the display 11 The RBW322-FTL-902 has a large display with clear indicators and icons for displaying current information about the room control module. 1 10 0 6 12 18 24 2 3 4 5 9 8 7 6 1 Time, temperature or setpoint 2 Energy storage unit 3 Weekly schedule 4 Window-open detec-

tion 5 Wireless status indica-

tor 6 Operating message and malfunction mes-

sage 7 Vacation mode 8 Party mode 9 Occupancy 10 Summer mode Initial display, can be configured The Energy storage unit indicator appears when the remaining charge of the RBW322-FTL-902 energy storage unit is < 10%. Current usage times per day The Window-open detection indicator appears if a radio partner transmits this message. Wireless communication icon visible: wireless communica-

tion established, at least one radio partner has been taught in. Wireless communication icon not visible: wireless commu-

nication not established, no radio partners have been taught in or all radio partners are interrupted. Wireless communication icon flashing: Radiogram trans-

mission/teach-in process. 12 or 24 hour display or identification number of the usage time This icon appears on the display when vacation mode is activated. This icon appears on the display when party mode is acti-

vated. Indicates if a room is in use or not. Person icon inside the house: The room is in use. Person icon next to the house: The room is not in use. This icon appears on the display when summer mode is activated. Issue 2015-01-09 12 Operations and Settings 7 Operations and Settings Settings can be made by both the service technician and the operator in the following working menus. The working menus are not restricted by an access code. 7.1 Summer mode When the sun icon is displayed, it indicates that the device is oper-

ating in summer mode. The setpoint that has been set for economy mode is used for room control. If summer mode is active, the occupancy button, party mode and weekly schedule are inactive. Summer mode is automatically activated for the time period from June 01 until August 31. Summer mode can be switched on and off manu-

ally using the occupancy button. Press the occupancy button for 2 seconds to switch summer mode on or off. 7.2 Operating Menu The following functions are available on the operating menu:

Setting the setpoint 7.2.1 Selecting the operating menu You can access the operating menu as follows:

Press the setting knob briefly. NOTE You have two options to set the comfort mode setpoint (operating menu, configuration menu). 7.2.2 Setting the setpoint comfort mode. You can only change the set point in comfort mode and for Press the setting knob briefly. The setpoint display flashes for 2 seconds. Select the desired setpoint using the setting knob. The newly selected value flashes and is then automatically applied. Alterna-

tively, you can apply a new value by briefly pressing the setting knob. The room control module display switches to the initial display. Issue 2015-01-09 Operations and Settings 7.3 Configuration Menu 13 The following functions are available on the configuration menu:

Setting party mode (usage time extension) Setting vacation mode Ending an active vacation mode early Deleting or ending vacation mode Setting the weekly schedule Deleting a usage time Setting the setpoints for comfort mode and economy mode Setting the time and date Setting the time, temperature or setpoint as the initial display Setting the 12/24 hour mode Switching the temperature units between F/C 7.3.1 Selecting the configuration menu You can access the configuration menu as follows:

Press the setting knob for 2 seconds. Turn the setting knob clockwise to access the individual setting functions. NOTE The individual setting functions are exited if the setting knob is pressed or if no settings are entered within approx. 30 seconds. 7.3.2 Setting party mode (usage time extension) Party mode allows you to temporarily extend a usage time by up to eight hours, meaning that the room continues to be controlled in comfort mode during this time. The maximum party period is 8 hours. This can be set in steps of 30 minutes. Press the setting knob for 2 seconds. Turn the setting knob clockwise. Select the Party mode function. Press the setting knob until the display flashes. The current time is set as the start of the party mode (usage time extension). 0 6 12 18 24 Issue 2015-01-09 14 Operations and Settings 0 6 12 18 24 Turn the setting knob to set the end time for party mode. The bar display shown indicates the set comfort mode extension (usage time extension). Press the setting knob. The display switches back to the initial display. 0 6 12 18 24 Comfort mode extension is effective immediately. Comfort mode is switched on. The party icon in the display indicates that party mode is active. Press the occupancy button to end party mode early. 7.3.3 Setting vacation mode In vacation mode, a room is controlled in reduced temperature mode for a defined time period of at least 2 days. Vacation mode overwrites/deactivates the set weekly schedule for the specified time. Press the setting knob for 2 seconds. Turn the setting knob clockwise to set vacation mode. Set vacation start, vacation end and the setpoint for the vacation time period in the following sequence:

Setting the vacation start Press the setting knob. The month display flashes. Set the month by turning the setting knob. Press the setting knob. Set the day by turning the setting knob. Press the setting knob. Setting the vacation end Set the month by turning the setting knob. Press the setting knob. Set the day by turning the setting knob. Press the setting knob. The display returns to the screen for setting the temperature setpoint for the vacation period. Issue 2015-01-09 Operations and Settings 15 Setting the setpoint Set the setpoint for the vacation time. Press the setting knob. The display switches back to the initial display. 0 6 12 18 24 Vacation mode begins on the set start date at 12 a.m. and ends on the set end date at midnight. If a vacation time is set and has not yet begun, the initial display. If vacation mode is active, the vacation end date as well as the appear on the initial display. If vacation mode is active, the controller operates in economy mode. Once the set vacation time has elapsed, the vacation mode function is deleted. The display switches to the initial display. icon appears on the icon Ending an active vacation mode early Press the setting knob. Deleting an inactive vacation mode Set the vacation start equal to the vacation end. Perform the settings as described above. NOTE The vacation period must be at least 2 days, and cannot be set retroactively. If a vacation start is entered which is before the current date, the set dates will not be active until the next calendar year. 7.3.4 Setting the weekly schedule You can set up to four usage times per day. A usage time consists of a start time and an end time (usage time block). This can be set in steps of fifteen minutes. A weekly schedule is available with the following setting ranges:

MOFR Monday - Friday SASU Saturday - Sunday MOSU Monday - Sunday Individual days MO, TU, WE, TH, FR, SA and SU 0 6 12 18 24 Press the setting knob for 2 seconds. Use the setting knob to select the Weekly schedule function and the desired weekday range (e.g. MOSU). Issue 2015-01-09 16 Operations and Settings 0 6 12 18 24 Press the setting knob. First usage time/Start time appears on the display and flashes; the is active. Turn the setting knob. Set the start time. Press the setting knob. First usage time/End time appears on the display and flashes; the is active. icon icon 0 6 12 18 24 1 Turn the setting knob. Set the end time. Press the setting knob. The display switches to the start time of the second usage time. If necessary, set a second, third and fourth usage time. The setting procedure is the same as for the first usage time block. In the display, you can also see which usage time (1) is set. Press the setting knob to end the setting of the usage times early. 0 6 12 18 24 The bar display shown indicates the usage times of the current day. If a usage time is active, the controller operates in comfort mode. In addition, the Economy mode is active if the current time is outside of the set usage time block. The icon icon is shown on the display. also appears in the display. Deleting a usage time NOTE Deleting a usage time automatically deletes all subsequent usage times within a weekday range. Be careful to select the correct weekday range for deletion. Select the end time of the usage time block to be deleted as described above. Turn the setting knob to the left until the end time is the same as the start time. Press the setting knob. The usage time is deleted and is no longer displayed. Factory settings: MOSU Monday Sunday, 6 a.m. - 8 p.m. Issue 2015-01-09 Operations and Settings 17 7.3.5 Setting the setpoints for comfort mode and economy mode Press the setting knob for 2 seconds. Turn the setting knob clockwise. Select the Setpoint function (temperature display). Press the setting knob. The setpoint for comfort mode flashes and can now be set. The Confirm the chosen setpoint for comfort mode by pressing the setting knob. icon is active. The setpoint for economy mode flashes and can now be set. The Confirm the chosen setpoint for economy mode by pressing the setting knob. icon is active. Factory setting:Comfort mode setpoint: 68 F (20 C) Economy mode setpoint: 59 F (15 C) 7.3.6 Setting the time and date Press the setting knob for 2 seconds. Use the setting knob to select the Time + date function TIME. Press the setting knob. Set the hour, minutes, year, month and day in the following sequence. The values to be set are always flashing. Setting the time:

Set the hour. Press the setting knob. Set the minutes. Press the setting knob. Setting the date:

Set the year. Press the setting knob. Set the month. Press the setting knob. Set the day. Press the setting knob. Daylight saving time switching occurs automatically according to Central European standards. Factory setting: Current Central European time Issue 2015-01-09 18 Operations and Settings 7.3.7 Setting the time, temperature or setpoint as the initial display Press the setting knob for 2 seconds. Use the setting knob to select the Setting the initial display function dISP. Press the setting knob. Use the setting knob to select the required initial display:

- Initial display: time

- Initial display: temperature or

- Initial display: setpoint Press the setting knob. The display switches to the initial display set by the user. Default setting: Initial display: time Setting the 12/24 hour mode Press the setting knob for 2 seconds. Turn the setting knob clockwise to access the 12/24 hour display. Press the setting knob. Set the display to 12/24 hours. Press the setting knob. If the 12 hour display (1) is activated, an additional A for AM or P for PM is shown in the display. 0 6 12 18 24 1 Default setting: 12 hours Issue 2015-01-09 Maintenance and Cleaning 19 Switching the temperature units between F/C Press the setting knob for 2 seconds. Turn the setting knob clockwise. Select the TEMP function to set the temperature unit F/C. Press the setting knob. Select the desired temperature unit. Press the setting knob. The display switches to the initial display. Default setting: F 8 Maintenance and Cleaning 8.1 Maintenance The RBW322-FTL-902 does not require regular maintenance. If operating or malfunction messages arise, carry out the actions described in the section Malfunctions on page 19. 8.2 Cleaning The RBW322-FTL-902 should be cleaned as necessary. There is no prescribed cleaning interval. Clean the RBW322-FTL-902 with a lint-free, lightly moistened cloth. Do not use any aggressive cleaning products. 9 Malfunctions The room control module provides information about the current status of the RBW322-FTL-902/MD15-FTL-902 functional unit and any malfunctions that have occurred. The operating and malfunction messages are shown on the display. Icon on dis-

play Problem Solution Check the battery level of the MD15-FTL-902. Replace the batteries in the MD15-FTL-902 if necessary or contact your service technician. Radio communication with at least one taught-in radio partner has been interrupted for more than one hour. The wireless status indicator is no longer displayed if wireless communication to all taught-in radio partners is interrupted. Issue 2015-01-09 20 Malfunctions Radio communication with at least one taught-in radio partner has been interrupted for more than four hours and a synchronization has failed. The wireless icon is also no longer displayed if wireless communication to all taught-in radio partners is interrupted. Wireless communication to the taught-in EnOcean system gateway is interrupted. The battery level of at least one MD15-FTL-902 is too low

(<10%). If no signal is received from the MD15-FTL-902 for a long period of time because the batteries are dead, the display switches to

. Room control module faulty, supersedes all other messages. Check the battery level of the MD15-FTL-902. Replace the batteries in the MD15-FTL-902 if necessary or contact your service technician. Replace the batteries in the MD15-FTL-902. For more infor-

mation, see the operating instructions for the MD15-FTL-902. Please contact your service technician. The wireless status indicator is not displayed. Please contact your service technician. No wireless connection exists. No taught-in radio partner exists. All radio partners are faulty. NOTE Operating and malfunction messages have priority over the 12/24 hour display. Issue 2015-01-09 Decommissioning, Removal and Disposal 21 10 Decommissioning, Removal and Disposal 10.1 Decommissioning The RBW322-FTL-902/MD15-FTL-902 functional unit must be decommissioned before transportation, storage or long periods of disuse. For decommissioning, you must reset the device to the factory settings. With these settings, the device no longer sends out wireless signals. Decommission all MD15-FTL-902 actuators. Perform a reset on the service menu to restore the factory settings as described below:

10.1.1 Selecting the service menu Press the setting knob for 2 seconds. Use the setting knob to select the Service menu SR. Press the setting knob. Enter the four-digit access code 4321. Each digit is entered individually and confirmed by briefly pressing the setting knob. If you enter the access code incorrectly, the display ER appears. Press the setting knob. 10.1.2 Restoring factory settings In the service menu, use the setting knob to select the Restore factory settings RES function. Press the setting knob. The display flashes. Press the setting knob again. The Restore factory settings function is carried out. All settings are reset to factory settings, the taught-in radio partners are deleted. The device returns to its initial state and can be decommissioned. Issue 2015-01-09 22 Decommissioning, Removal and Disposal 10.2 Removal 10.2.1 Screw mounting If you want to remove the room control module, proceed as follows:

Insert the flat screwdriver into the notch between the room control module and the holding plate on the right side. Use the flat screwdriver to press the holding bar and release the connection. Slide the room control module upward. Separate the room control module from the holding plate. Remove the screws by turning the flat screwdriver in counter-

clockwise direction. 10.2.2 Adhesive mounting NOTICE Damage to the mounting surface!

If an adhesive pad other than the one supplied is used, or the mounting surface is tex-

tured and does not offer sufficient load-bearing capacity, the mounting surface may become damaged when the adhesive pad is removed. Only use the adhesive pad supplied when mounting the holding plate. Only adhere the device to smooth, resistant surfaces (e.g. tiles) and not on tex-

tured surfaces that can easily become damaged (e.g. textured plaster, woodchip wallpaper). If you want to remove the room control module, proceed as follows:

Issue 2015-01-09 Decommissioning, Removal and Disposal 23 Insert the flat screwdriver into the notch between the room control module and the holding plate on the right side. Use the flat screwdriver to press the holding bar and release the connection. Slide the room control module upward. Separate the room control module from the holding plate. Remove the adhesive pad from the wall and the holding plate. 10.3 Disposal The device RBW322-FTL-902 room control module is an electrical device with lithium batteries and a solar cell. The RBW322-FTL-902 room control module therefore may not be disposed of with household waste, it may only be disposed of in appropriate recepta-

cles or at designated collection points. Please observe locally applicable laws and regulations. Issue 2015-01-09 24 Technical Specifications 11 Technical Specifications 11.1 Technical data Power supply Dual power supply consisting of a solar cell and an internal energy storage unit with priority management Internal energy storage uses 2 replaceable 3.6 V AA lithium batteries Measured quantity Room temperature in homes or offices Measuring system Integrated digital sensor Temperature units F or C, can be configured Measuring range Relative measure-

ment precision Display 32..122 F (0..50 C) 0.1 K LCD:

Time Weekly schedule Icon to indicate operating mode Setpoint in the temperature units selected 50..85 F, resolution 1 F

(10.0..30.0 C, resolution 0.1 K) Controls Setting knob with confirmation button for setting: Setpoint, party mode, vacation mode, weekly schedule, time, date, display options (e.g. 12/24 hour display) and service data Occupancy button: Manually switch between present or Interfaces between the RBW322-FTL-902 and the MD15-FTL-902 Transmission power Illuminance for solar cell Operating range Housing Protection class absent technoLink wireless interface:

Radiogram: EnOcean radiogram, bidirectional Frequency: 902.875 MHz Duty cycle: < 1 %

Cyclic transmission or reception intervals

< 10 mW Min. 150 lux recommended Approx. 30 m in buildings (depending on building substance) Plastic housing, RAL 9010 (pure white) Other colors on request III Issue 2015-01-09 Technical Specifications 25 IP30 Degree of protec-

tion Ambient tempera-

ture Ambient humidity During operation: 20..85 % r.h., non-condensing 32..122 F (0..50 C) Installation Weight Dimensions Out of operation: 5..90 % r.h.; non-condensing Flexible mounting using screws or adhesive 0.22 kg WxHxD: 90 x 153.7 x 26.7 mm 11.2 Dimensions 5

. 6 3.6 0.1 0.3 0.4 0.4 R 1.8 0.2 3.5 0.8 NOTE The figure shows the dimensions of the device in mm. 11.3 Wireless interface Wireless communication with the MD15-FTL-902 is cyclical, bidirectional and includes an intelligent teach-in process. If the wireless communication between the RBW322-FTL-902 and the MD15-FTL-902 is interrupted, a new teach-in procedure is automatically triggered internally. NOTE This device uses only EnOcean radiograms. Only the MD15-FTL-902 can be used as a radio partner. Issue 2015-01-09 26 11.4 Type plate Technical Specifications The RBW322-FTL-902 type plate is located on the back of the device, behind the holding plate. 01 02 03 04 05 06 01 02 03 04 05 06 RBW322-FTL-902 type plate Serial number Identification number Frequency Device approval number (USA) Device name Issue 2015-01-09 Appendix 12 Appendix 27 Compliance statement This device complies with section 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation. Modifications not expressly approved by this company could void the users authority to operate the equipment. Radio Frequency (RF) Signal The radio device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limit for exposure to radio frequency (RF) energy set by the OET Bulletin 56 Supplement C in the USA and by the Ministry of Health (Canada), Safety Code 6 in Canada. These limits are part of comprehensive guidelines and established permitted levels of RF energy population. These guidelines are based on the safety stan-

dards previously set by international standard bodies. These standards include a substantial safety margin designed to assure the safety of all persons, regardless of their ages and health. This device and its antenna may not be located too close to or operated in conjunction with any other antenna or transmitter. This device is capable of compliance with localized specific absorption rate (SAR) for uncontrolled environment/general public exposure limits specific in ANSI/IEEE C95.1-1992 and has been tested in accordance with the measurement procedures spec-

ified in IEEE Std. 1528-2003 December 2003. Class A digital device or peripheral The RBW322-FTL-902 is a digital device that is marketed for use in a commercial, indus-

trial or business environment, exclusive of a device which is marketed for use by the general public or intended to be used in the home. The equipment has been tested and found to comply with the limits for a class A digital device, pursuant to section 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the function manual, may cause harmful interference with radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his or her own expense. Declaration Concerning Antenna Specifications The device confirms to the FCC recommendations for internal antenna type described below:

Model No. of antenna:

N/A Issue 2015-01-09 28 Contact data Type of antenna:

Gain of the antenna:

Frequency range:

integrated/onboard PCB-antenna, permanently attached

-10 dBi 902 MHz 13 Contact data USA Magnum Energy Solutions LLC 43 Village Way #209 Hudson, OH 44236

(+1) (330) 656 9365 (telephone)

(+1) (866) 271 3961 (toll free)

(330) 656 9368 (fax) Issue 2015-01-09 Contact data 29 Issue 2015-01-09 30 Contact data Issue 2015-01-09

Operating Instructions RPW414-FTL-902-ALC Room Control Module Issue 2016-09-01 A Document number 1.10-AL.902-09 2 Table of Contents Content RPW414-FTL-902-ALC Table of Contents Page General Information. 4 1 1.1 Information on the operating instructions . 4 1.1.1 Validity and storage of the operating instructions . 4 1.1.2 Copyright . 4 1.1.3 As an operator, what can you do?. 4 1.1.4 Customer service. 5 1.1.5 Notes on presentation in this manual . 5 1.2 Scope of Delivery . 5 2 2.1 2.2 2.3 2.4 3 3.1 3.2 3.3 4 4.1 4.2 4.3 5 5.1 5.2 Safety . 5 Presentation and structure of warnings. 5 Classification of warnings . 6 Intended use . 6 Responsibilities of the Operator . 6 Equipment Description . 7 Components . 8 Indicators on the display . 9 Operations. 10 Packaging, transportation and storage . 10 Packaging . 10 Transportation . 11 Storage . 11 Maintenance and Cleaning . 12 Maintenance . 12 Cleaning . 12 Removal and Disposal. 12 6 6.1 Removal . 12 6.1.1 Screw mounting. 12 6.1.2 Adhesive mounting . 13 Disposal. 13 6.2 7 7.1 Technical Specifications . 14 Technical data . 14 A Issue 2016-09-01 RPW414-FTL-902-ALC Table of Contents Document number 1.10-AL.902-09 3 7.2 7.3 8 8.1 9 Dimensions . 15 Type plate . 16 Appendix . 17 Compliance statement . 17 Contact data. 19 Issue 2016-09-01 A Document number 1.10-AL.902-09 4 RPW414-FTL-902-ALC General Information 1 General Information 1.1 Information on the operating instructions These operating instructions contain information on the RPW414-FTL-902-ALC and information on the safe installation, commissioning, handling and correct operation of the device. The operating instructions is intended for all persons who operate the RPW414-FTL-902-ALC and should increase the reliability and the service life of the RPW414-FTL-902-ALC; it should also help prevent hazards, downtime and possible exclusion of warranty claims. Each person who carries out work on the RPW414-FTL-902-ALC must have read and understood these operating instructions. If you have any questions that are not resolved by these operating instructions, you can obtain further information from the supplier or manufacturer. 1.1.1 Validity and storage of the operating instructions These operating instructions are an integral part of the RPW414-FTL-902-ALC and apply exclusively to this device. Keep the operating instructions in the immediate vicinity of the device throughout the entire service life of the RPW414-FTL-902-ALC. The operating instructions must be passed on to any subsequent owners or users. 1.1.2 Copyright The duplication (even extracts thereof), removal or transfer of content is not allowed without the manufacturers written permission. 1.1.3 As an operator, what can you do?

You may only perform the following actions on the device:

Setting the time and date Setting vacation mode Setting the initial display to Room temperature or Time Manually switching between comfort and economy mode Automatically switching between comfort and economy mode Restoring defaults Maintenance and Cleaning Contacting customer service in case of Malfunctions Removal and Disposal A Issue 2016-09-01 RPW414-FTL-902-ALC Safety Document number 1.10-AL.902-09 5 NOTE Mounting, installation, commissioning and troubleshooting may only be performed by a service technician. Improper changes by the operator can lead to malfunctions and reduce the service life of the device. 1.1.4 Customer service If problems occur, if you have questions or if you require technical information, please contact your service technician. 1.1.5 Notes on presentation in this manual Notes contain supplementary information:

NOTE Indicates additional information and important details that can simplify use of the device. List symbols Additional icons are presented in the text to help you follow the operating instructions:

Indicates a list item. Indicates a step that must be performed. 1.2 Scope of Delivery The standard scope of delivery includes:

RPW414-FTL-902-ALC Holding plate Adhesive pad Installation note RPW414-FTL-902-ALC 2 Safety Always observe the following in order to operate the RPW414-FTL-902-ALC Room Control Module correctly and safely:

Read all warnings in these operating instructions in order to prevent injuries and damage to the device or any equipment connected to it. To avoid potential hazards, use the device only as described in the operating instructions. Observe the described actions and warnings in this operating instructions. 2.1 Presentation and structure of warnings Hazardous situations are displayed with warnings and safety instructions in these oper-

ating instructions. Hazard symbols and signal words convey the severity of the hazard. The warnings are action-related and are structured as follows. Issue 2016-09-01 A Document number 1.10-AL.902-09 6 RPW414-FTL-902-ALC Safety CAUTION Type/source of danger!

Possible consequences. Preventative measures. 2.2 Classification of warnings Warnings are classified according to the severity of the hazard. Hazard levels with their corresponding signal words and warning symbols are described in the following:

The CAUTION signal word is used for situations that could result in moderate or minor injuries. CAUTION The NOTICE signal word is used for situations that could result in damage to the device. NOTICE 2.3 Intended use Observe the following to operate the device correctly:

Do not operate the device in wet or moist environments. Do not operate the device in a potentially explosive environment. Do not open the device. Only operate the RPW414-FTL-902-ALC when it is in original condition. Modifications to the device could result in unforeseeable dangers and are thus prohibited. 2.4 Responsibilities of the Operator You may only operate the device if it is technically sound and in safe working order. Please observe the following items:

Ensure that mounting, installation and commissioning are only performed by qualified technicians. Ensure that these operating instructions are available to the user. Make sure that the user has read the operating instructions before starting work with the RPW414-FTL-902-ALC. If the device becomes damaged or if a malfunction message is issued, you must inform your service technician. A Issue 2016-09-01 RPW414-FTL-902-ALC Equipment Description 3 Equipment Description Document number 1.10-AL.902-09 7 The RPW414-FTL-902-ALC is a solar-powered, self-learning room control module. You can use the room control module to measure the room temperature in residential or commercial buildings and to create a utilization time profile from the data. After the RPW414-FTL-902-ALC has measured the room temperature, the device wire-

lessly transmits the desired room temperature. Issue 2016-09-01 A Document number 1.10-AL.902-09 8 3.1 Components RPW414-FTL-902-ALC Equipment Description 03 04 05 06 07 08 09 01 02 Item Designation 01 Display Explanation Displays information on the current state of the functional unit Occupancy sensor Detects presence/absence for the utilization time profile Solar cell Fahrenheit/Celsius Switches displayed temperature between Fahrenheit and Generates energy for the room control module Control fan Raise setpoint Lower setpoint Setting button Service connection

(underside) Celsius Turns the fan on and off Raises the room temperature setpoint Lowers the room temperature setpoint Switches the RPW414-FTL-902-ALC on and off (together with the occupancy button) Starts the registration procedure Resets the room control module to factory settings For authorized service technicians only 02 03 04 05 06 07 08 09 A Issue 2016-09-01 RPW414-FTL-902-ALC Equipment Description 3.2 Indicators on the display 01 02 03 04 05 Document number 1.10-AL.902-09 9 10 11 06 07 08 09 Item Icon/display 01 02 Antenna Battery 03 04 05 06 07 08 09 10 11 Windows Code Prog Information field Auto Sun Occupancy Clock Degrees Fahrenheit Explanation Status of the radio connection Room control module energy storage unit charging state < 30%

Rapid temperature drop detected Status and malfunction messages Radio partners can be registered, registration status active Display of the room temperature, time (= initial display, can be configured) or messages Learned utilization time profile is active The solar cell is active (test installation location). Summer mode is active Occupancy sensor is active (test installation location). Presence/absence detected The information field displays the time (hh:mm) The information field displays the temperature (F) Issue 2016-09-01 A Document number 1.10-AL.902-09 10 3.3 Operations RPW414-FTL-902-ALC Packaging, transportation and storage The RPW414-FTL-902-ALC sensors, designed for zone control, are low-power wireless devices that use light-harvesting through solar panels as their primary power source. This line of sensors includes the models shown in the table below. All are available in 868, 902, and 928 MHz radio frequency. The sensors communicate with an Rnet Gateway that can be wired to the Rnet port of any of the following controllers:

LGR line ME line SE line ZN line Equipment portal The Rnet Gateway translates the sensor's customized EnOcean protocol into the Rnet protocol so that the sensors can be integrated with the existing programming logic for wired ZS sensors. NOTE: WS sensors do not operate with the standard EnOcean protocol, and third-party wireless sensors do not operate on the Rnet network. Requirements A v6.5 or later WebCTRL system v6-00 or later controller drivers Features Temperature and relative humidity sensor On-board PIR (passive infrared) motion sensor Wireless Digital display Fan control Solar-powered indoor solar panels collect ambient light to power the sensor and send wireless communication 4 Packaging, transportation and storage 4.1 Packaging Unpacking The device is delivered in a cardboard box. When unpacking it, proceed as follows:

Carefully remove the device from the packaging making sure you do not damage it. Dispose of the packaging material according to local regulations. A Issue 2016-09-01 RPW414-FTL-902-ALC Packaging, transportation and storage Document number 1.10-AL.902-09 11 Repackaging If you wish to repackage the device for transportation (e.g. for sending a device to the manufacturer), observe the following points:

Select an appropriate material for the packaging. The packaging must not be too large or too small. Use packing material to prevent the device from sliding. Carefully close and seal the packaging. 4.2 Transportation If you wish to transport or send a device, proceed as follows:

Transport the device in appropriate packaging. Do not throw or toss the packaged device. Do not drop the device. 4.3 Storage If you wish to store the packaged device for a long period of time, you must observe the following:

Ensure that the environment is dry. Only store the device indoors. Store the device in a dust-free environment. Protect the device from bumps and mechanical damage. Issue 2016-09-01 A Document number 1.10-AL.902-09 12 5 Maintenance and Cleaning 5.1 Maintenance RPW414-FTL-902-ALC Maintenance and Cleaning The RPW414-FTL-902-ALC does not require regular maintenance. 5.2 Cleaning The RPW414-FTL-902-ALC Room Control Module should be cleaned as necessary. There is no prescribed cleaning interval. Clean the RPW414-FTL-902-ALC with a lint-free, lightly moistened cloth. Do not use any aggressive cleaning products. 6 Removal and Disposal 6.1 Removal 6.1.1 Screw mounting If you want to remove the room control module, proceed as follows:

Insert the flat screwdriver into the notch between the room control module and the holding plate on the right side. Use the flat screwdriver to press the holding bar and release the connection from the room control module to the holding plate. Slide the room control module upward. Separate the room control module from the holding plate. Remove the screws by turning the flat screwdriver in counter-

clockwise direction. Remove the holding plate. A Issue 2016-09-01 RPW414-FTL-902-ALC Removal and Disposal 6.1.2 Adhesive mounting Document number 1.10-AL.902-09 13 NOTICE Damage to the mounting surface!

If you use an adhesive pad other than the one supplied, or the mounting surface is tex-

tured and does not offer sufficient load-bearing capacity, the mounting surface may become damaged when the adhesive pad is removed. Only use the adhesive pad supplied when mounting the holding plate. Only adhere the device to smooth, non-sensitive surfaces (e.g. tiles) and not on textured surfaces that can easily become damaged (e.g. textured plaster, wood-

chip wallpaper). If you want to remove the room control module, proceed as follows:

Insert the flat screwdriver into the notch between the room control module and the holding plate on the right side. Use the flat screwdriver to press the holding bar and release the connection from the room control module to the holding plate. Slide the room control module upward. Separate the room control module from the holding plate. Remove the adhesive pad from the wall and the holding plate. Remove the holding plate. 6.2 Disposal The RPW414-FTL-902-ALC Room Control Module is an electrical device with lithium batteries and a solar cell. The RPW414-FTL-902-ALC Room Control Module therefore may not be disposed of with household waste, it may only be disposed of in appropriate receptacles or at designated collection points. Please observe locally applicable laws and regulations. Issue 2016-09-01 A Document number 1.10-AL.902-09 14 7 Technical Specifications 7.1 Technical data RPW414-FTL-902-ALC Technical Specifications Nominal voltage Measured quantity Measuring system Measuring range Relative measure-

ment precision Display Controls Interfaces Dual power supply consisting of a solar cell and an internal energy storage unit with priority management Lithium battery (AA): DC 2.3 V; 0.08 W Room temperature in homes or offices Temperature sen-

sor:

Occupancy sen-

sor:

32 F (0 C) to 104 F (40 C) 0.1 K

- Integrated digital sensor

- Integrated PIR (Passive infrared) sensor LCD:

Room temperature/time, optionally Status indicators Fahrenheit/Celsius: switch displayed temperature between Fahrenheit and Celsius Control fan: turn the fan on and off Raise setpoint: raise the room temperature setpoint Lower setpoint: lower the room temperature setpoint EnOcean wireless interface:

Radiogram: EnOcean radiogram, bidirectional Frequency: 902,875 MHz Duty cycle: < 1 %

Cyclic transmission/reception intervals Communication cycle 10 min Transmission power Illumination strength Min. 100 lux recommended Operating range

< 10 mW Housing Approx. 30 m in buildings (depending on build-

ing structure) Approx. 10 m Radio:

Occupancy sen-

sor:

Plastic housing, RAL 9010 (pure white), 7001 Other colors on request III IP30 Protection class Degree of protection Ambient temperature 32 F (0 C) to 122 F (50 C) A Issue 2016-09-01 RPW414-FTL-902-ALC Technical Specifications Document number 1.10-AL.902-09 15 Ambient humidity Installation Maintenance Weight Dimensions

(WxHxD) During operation: 20 to 85% r.h. Out of operation: 5 to 90% r.h.; non-condensing Flexible mounting using screws or adhesive Maintenance-free 0.22 kg 90 mm x 153.7 mm x 26.7 mm 7.2 Dimensions 7

, 3 5 1 91,6 2,5 7,0 10,5 9,2 R 30,0 4,1 90,0 19,7 NOTE The figure shows the dimensions of the device in mm. Issue 2016-09-01 A Document number 1.10-AL.902-09 16 7.3 Type plate RPW414-FTL-902-ALC Technical Specifications The RPW414-FTL-902-ALC Room Control Module type plate is located on the back of the device, behind the holding plate. 02 03 04 05 06 SN: 000000.000 ID: 00000000 902 MHz FCC ID: NY3RBW322MES RPW414-FTL-902-ALC A 01 01 02 03 04 05 06 Type plate of the RPW414-FTL-902-ALC Room Control Module Serial number Identification number Frequency Device approval number (USA) Device name A Issue 2016-09-01 RPW414-FTL-902-ALC Appendix 8 Appendix 8.1 Compliance statement Document number 1.10-AL.902-09 17 Compliance statement This device complies with section 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference that may cause undesired operation. Modifications not expressly approved by this company could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with this document, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Radio Frequency (RF) Signal The radio device is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limit for exposure to radio frequency (RF) energy set by the OET Bulletin 56 Supplement C in the USA and by the Ministry of Health (Canada), Safety Code 6 in Canada. These limits are part of comprehensive guidelines and established permitted levels of RF energy population. These guidelines are based on the safety stan-

dards previously set by international standard bodies. These standards include a substantial safety margin designed to assure the safety of all persons, regardless of their ages and health. This device and its antenna may not be located too close to or operated in conjunction with any other antenna or transmitter. This device is capable of compliance with localized specific absorption rate (SAR) for uncontrolled environment/general public exposure limits specific in ANSI/IEEE C95.1-1992 and has been tested in accordance with the measurement procedures spec-

ified in IEEE Std. 1528-2003 December 2003. Issue 2016-09-01 A Document number 1.10-AL.902-09 18 RPW414-FTL-902-ALC Appendix Class B digital device or peripheral The RPW414-FTL-902-ALC is a digital device that is marketed for use in a commercial, industrial or business environment, exclusive of a device which is marketed for use by the general public or intended to be used in the home. The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to section 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference tot radio or tele-

vision reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Declaration concerning antenna specifications The device conforms to the FCC recommendations for the internal antenna type described below:

Model no. of antenna:

Type of antenna:

N/A integrated/onboard PCB antenna, permanently attached

-10 dBi 902 MHz Gain of the antenna:

Frequency range:

Industry Canada Regulatory Statement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following conditions:

1) This device many not cause interference. 2) This device must accept any interference, including interference that may cause undesired operation of the device. Important: Any changes or modifications not expressly approved by manufacturer could void the users authority to operate the equipment. This Class B digital apparatus complies with Canadian ICES-003. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de license. L'exploitation est autorise aux deux conditions suivantes:

1) L'appareil ne doit pas produire de brouillage. 2) L'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mem si le brouillage est susceptible d'en compromettre le foncitionnement. A Issue 2016-09-01 RPW414-FTL-902-ALC Contact data Document number 1.10-AL.902-09 19 Important: Tous les changements ou modifications pas expressment approuvs par la partie responsable de la conformit ont pu vider l'autorit de l'utilisateur pour actioner cet quipment. Cet appareil numrique de las classe B est conforme la norme NMB-003 du Canada. 9 Contact data USA Magnum Energy Solutions LLC 43 Village Way #209 Hudson, OH 44236

(+1) (330) 656 9365 (telephone)

(+1) (866) 271 3961 (toll free)

(330) 656 9368 (fax) Canada Automated Logic - Ottawa Office 8 Hearst Way Kanata, ON K2L 2P4

(+1) (613) 599 7700 (telephone)

(+1) (613) 599 7708 (fax) Issue 2016-09-01 A Document number 1.10-AL.902-09 20 RPW414-FTL-902-ALC Contact data A Issue 2016-09-01