Document: Onvation Hub Manual Manufacturer: Kimberly-Clark Global Sales, LLC (Kimberly-Clark Corporation) Date: 2019-01-21 I. Intended Use and Installation This device is intended to be used as a wireless gateway that monitors remote external sensors and relays data to a remote server. It is intended to be installed in public washrooms. It contains some of the following features:
LTE, UMTS, and GSM technology 2.4GHz wireless technology Power-over-Ethernet (PoE) Audio speaker and microphone Thermal pixel array imaging system II. Radios This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved Kimberly Clark could void the users authority to operate the equipment. This device must not be co-located or operating in conjunction with any other antenna or transmitter. The radio module may only be combined with other radios in a host when following current FCC guidance for integration of multiple radios. The module is for integration with host products of the grantee of the module only. It must be integrated in a way maintaining a separation distance between the antenna in the module to all metallic housings or other PCBs of at least 1 cm This device complies with Industry Canada license-exempt RSS 210. Operation is subject to the following two conditions: (1) this device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS 210. Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas provoquer d'interfrences et (2) cet appareil doit accepter toute interfrence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil. FCC: 2AQVA-ONVAHUB51914 IC: 24318-ONVHUB51914 This equipment contains the following radios:
Cellular: Telit LE910C1-NA Bluetooth: Nordic nRF52832; Bluetooth 4.0 LE This equipment may contain the following radio if indicated on its labeling. Zigbee Digi Xbee-PRO S2C FCC ID: RI7LE910C1NA IC ID: 5131A-LE910C1NA FCC ID: MCQ-PS2CTH IC ID : 1846A-PS2CTH III. Unintentional Radiator Conformance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.