Test Report No.: GETEC-E3-05-073 FCC Class B Certification APPENDIX H
: USERS MANUAL EUT Type: TV Link Loader FCC ID: TGETLL-1000A TV Link Loader Users Manual 2005 KIMIN Electronics Attention for Safety
'Attention for Safety' is to prevent accident and danger beforehand using product safety and right. Two or three main point in place that keep necessarily and can see alway Warning
* When violated lower part item, serious injury or death can happen.
In case this product wet in water, do not put in could apply heat place to dry. Can explode or be responsible for transformation or breakdown.
Do not use in place that temperature is high or there is moisture. Whether wet because of rain or spill drinking water and so on, in if use be responsible for battery explosion or be responsible for breakdown can.
When wild wind, thunder, lightning strike extremely, control use of product, and unplug supply cord and charger. Can wound serious injury by lightning strike, and fire can break out.
Disjoint product voluntarily, or do not shock.
Power cord is not reflected, and do not use charge Adapter when part that inserts concert is loose.
Do to put heavy thing on power cord or is not spread.
Do not stare infrared rays window directly at infrared rays communication. There is danger of eyesight damage. Caution
* When violated lower part item, slight injury or product damage can happen.
After avoid shock and impact, and extract when nonuse or when is absent power cord, keep in safe place.
Do not drop or strike or shake product extremely.
When wild wind, thunder, lightning strike extremely, control use of product, and unplug together supply cord and charger.
Disjoint product voluntarily, or do not shock.
Place that there are much dusts avoids setup, and do supply cord so that do not approximate to heating appliances.
After is charged when nonuse battery and leave many long hours, keep at normal temperature.
In case of use again battery after leaving alone many long hours, have better use after charge perfectly.
Contents 1. 2. 3. 4. 5. 6. 7. 8. 9. Intro Each Button Function Explanation To charge, to turn on Power STANDBY Mode Installation Menu Log-in To use Installation Menu Password Substitute Debug Mode Channel Edit Program 10. Electrical standard 11. Construction Intro1 Function of This Product Thank for buying TV Link Loader. This product has following function. Remote Control Function
: Achieve channel and volume Up, Down of general remote control and function of OK button. Channel Information Storage Function
: Can do channel information of TV to do storage on TV Link Loader interior. Channel Information Transfer Facility
: Can transmit channel information of TV that is stored to TV Link Loader on other TV.
* Use extent is limitative in other TV product that product that see is exclusive use special procurements mounting of LG Electronics commercial LCD TV. 2 Each button function explanation MODE Button Send Button It is when enter by TV INSTALLATION MENU and button that select Up, mode of Down button. It is button to transmit channel information that is stored in TV Link Loader by TV through infrared-ray communication. Receive Button It is button to store channel information of TV by TV Link Loader through RS232 communication. Up Button Enter Button Down Button It is button that act Channel Up of general remote control according to mode, Volume Up role. Enter to Password Mode, and it is button that act as enter of general remote control. It is button that act Channel Down of general remote control according to mode, Volume Down role. 3 To charge, to turn on Power TVLink Ready DC 9V Adapter If charge Connect 9V DC Adapter in marked position that is concert. and insert to 220V AC If turn on power supply Connect 9V DC Adapter in marked position that is concert. and insert to 220V AC And that is switch by ON.
, do marked place's After power on
Confirm that phrase called "TV Link" in LCD original idea first line and "Ready" in second line is marked.
Confirm that battery residual quantity on the right top portion and arrow on right lower column are marked.
When connected Adapter all, confirm since light is lighted in 'Power'.
When connected Adapter all, battery does not pack, confirm whether light is lighted in 'Charge'. 4 STANDBY Mode TVLink Standby What is STANDBY When power supply enters, is situation that do not act other thing to minimize consumption of current.
"Standby" is marked in second line of LCD. If get into 'STANDBY' state Turn on power supply and in case there is no any manufacturing for 30 seconds, get into 'Standby' state. Also, get into 'Standby' state to when there is no any manufacturing after channel information transmission or for after click button 20 seconds. If escape in 'STANDBY' state Press 'Receive' button, or turn on again while put out power supply. 5 Installation Menu Log-in If come to Installation Menu TVLink ModeIn First, Put TV Link Loader's top portion infrared rays communications department by TV and push MODE button more than 3 seconds. Turn TV Link Loader by TV when Installation menu is marked. Then, Installation menu is appeared automatically. If is not come to Installation menu Confirm whether TV Password and TV Link Loader's Password agree. If Password is same, try again. In case may not be so, inquire to service center. 6 To use Installation Menu Button manufacturing in Installation menu Transfer between menu changes arrow of LCD right side lower column using Mode button establish as ''. Locate cursor to menu that want using Up, Down button. Use Mode button again come to menu of do cursor addition if click Up button after establish as ''. necessarily. If channel information does send-receive When receive channel information, RS232toRJ12 cable connects TV and TV Link Loader's Select TV Link Loader in Installation menu. Confirm "Ready to download ..." OSD at TV. In the case of transmission, press Send button. In the case of reception, press Receive button. Confirm Volume OSD of TV and TV Link Loader's LCD for confirmation of progress situation.
< TV OSD >
TVLink PRG 40
< TV Link Loader LCD>
6 To use Installation Menu If cancel channel information send-receive When transmit channel information, is canceled if click more Send button once. When cancel, confirm "SendErr" in LCD window. When receive channel information, is canceled if click more Receive button once. When cancel, confirm "RcommErr" in LCD window. TVLink SendErr Channel information cancel transmission TVLink RcommErr Channel information eception cancellation Channel information at send-receive caution When receive channel information, connect cable necessarily. In case "RCommErr" message is marked in LCD window, confirm cable joint. 7 Password Substitute If come to Password Mode Put out TV Link Loader's power supply. If turn on TV Link Loader's power supply in state that click ENTER button, is entered by Password Mode. If change Password If click Up button in Password Mode, can change TV Link Loader's Password if develop into Password of TV convertibly and click Down button. If click selecting, can change number using Up, Down button. Select Password number that want and move by next time number through ENTER button. If click ENTER button in last number, Password is changed. Do 'Confirm' TV Password's case and transmit infrared rays data by TV, and store justly without Confirm case of TV Link Loader Password alteration. Up. TLL Dn. TV Password Mode In PassWord 0000 Changing Password 8 Debug Mode Debug Mode Data Format R/W Program
Number(2byte) Program Info(2byt e)
PLL Data
(4yte)
, ACMS Data
(10byte) Ex) R63-24=09A8,dc2503251b20 Basic Rule
Basically, transmit 'Hex code' in 'ASCII' form. When is '0x63', '6' and '3' are transmitted in ASCII form. Instruction 1. Read A. Ex) r(Cr) R(Cr) : Is instruction that read all Eeprom data. R00-24=09A8,2503251b20 R63-24=09A8,2503251b20
(00 ~ 99 to 00 ~ 63 by Hex indication) A. rxxp ,rxp : x,xx = 0~63 Input address in Hex type. Ex) r63(Cr) R63-24=09A8,2503251b20 Ex) r2(Cr) R02-24=09A8,2503251b20 2. Write A.
: Is equal with data format that read except 'W' and 'P'. w63-24=09A8,2503251b20(Cr) Can confirm to read after have used through instruction. 8 Debug Mode
<Caution>
UART communication is impossible in Standby mode.
Debug mode is not communication with TV but communication with terminal of PC.
Standby mode execution condition
Do confirmation possibility as "Standby" on LCD screen.
Enter by Standby mode after 30 seconds since Power On.
If click any button in Stand by mode, get into Ready state.
At this point, is entered by Standby mode by automatic after 20 seconds if do not any use.
Therefore, while put out power supply when was Standby mode turn on or desire to come by debug mode in 20 drafts after click Receive key once.
Desire to observe as is entered in Stand by state if there is no transmission for 1 minute after come by debug mode. 9 Channel Edit Program
- Functions 1. To view/get Channel-Map data of a TV Link Loader. 2. To change/update Channel-Map data of a TV Link Loader.
- How to Connect Use a RS232C(PC)-to-stereo (TV Link Loader) Jack for a connection. Stereo Jack(RS232C) Serial Port(RS232C) PC
(using Program)
- The following screen is Main Screen.
- Downloading Data from TV Link Loader 1. Make sure that its connected between PC and TV Link Loader and Ready-state. 2. Click [LOADER=>PC] button. The following screen will be opened, and set up with Default value if you want to change a value. 3. If Downloading is failed. Check Comport and a state of a TV Link Loader.
- Updating Data to TV Link Loader 1. Check Connection (PCTV Link Loader) and Check Ready-State. 2. All data in a PC program(Channel Editor) is loaded to a TV Link Loader.
- Upload/Download Problem 1. The upload/download data is possible when TV Link Loader is Ready-State. 2. If upload/download is failed in a Ready-State. Turn off and on TV Link Loader and Retry transferring.
- Save/Read File 1. Click [Save File] button to save data to the file. 2. Click [Read File] button to load data from the file.
- View/Edit Channel Detailed-information 1. You can see following Input screen, when you double-click the [P.no] section. 2. You can edit [Picture Carrier Value] in Editor box or the following [Channel Select Box]. 3. [Channel Select Box] will be opened When You click the [Chg Freq.] Button. 4. The range of Channel Number is 1 ~ 100. 10 Electrical standard
<Specification>
Power
Adapter Input
: AC230V~50Hz(for EU) AC120V~60Hz(for US)
Adapter Output
Battery
: DC9V, 300mA
: DC1.2, 400mA (2/3AAA) * 5EA
Use environment condition
: 0 ~ 40C, 10 ~ 80%
LCD
Panel
Need Power
Kind
: 32mm
: DC5V
: 8 * 2 Character
External form size
: 65W * 22H * 120D (mm) 11 Construction
< TV Link Loader >
< DC 9V Adapter (For EU)>
< DC 9V Adapter (For US)>
< Program CD >
< Users Manual >
< RS232toRJ12 Cable >