Fact Sheet KINEXON Receiver User Manual Handheld Application Version 1.2 Battery ABS 126 x 98 x 34 mm 200 g / 505 g (with battery) 35 hours (active), 200 days (standby) 10 hours (100%), 5 hours (50%), 12-24 V DC
-20 75 C 2.4/5 GHz (Wifi), 3.23738 6.81013 GHz (UWB) RECEIVER (Kinexon Receiver):
Material:
Dimensions:
Weight:
Power Supply:
Battery Lifetime:
Charging:
Temperature:
Communication:
SETUP Receiver Mounting Generally, there are two possibilities concerning the environment in which the Kinexon receiver will be temporarily placed: indoor or outdoor. The receiver can be powered on and off by pressing the power button. In indoor as well as outdoor environments, the Receiver will be temporarily mounted on tripods etc. Receiver Tag Kinexon 2015. This document is confidential and contains information which is proprietary to Kinexon GmbH. No reproduction is permitted without prior express written permission of the author (info@kinexon.com).
- CONFIDENTIAL -
2 Regulatory and Legal Information The Kinexon Receiver has been designed to be in compliance with both the U.S. FCC Part 15 subpart F regulations, sections 15.519 and 15.521 and with the European Union ETSI EN 302 065 standards. Two different versions of the Kinexon Receiver are available, one version supports the FCC emissions mask (Region 1) and the second supports the ETSI standard mask (Region 2). Disclaimer The information in this document is subject to change without notice. Kinexon GmbH assumes no responsibility for inaccuracies or omissions and specifically disclaims any liabilities, losses, or risks, personal or otherwise, incurred as a consequence, directly or indirectly, of the use or application of any of the contents of this document. For the latest documentation, contact Kinexon GmbH. Intended Use This manual describes the setup and use of the Kinexon Receiver. Use this product only for the purpose it was designed for. FCC Compliance This device complies with 47 CFR Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device may not be employed for the operation of toys. Operation onboard an aircraft, a ship or a satellite is prohibited. The use of this device mounted on outdoor structures, e.g., on the outside of a building or on a telephone pole, or any fixed outdoors infrastructure is prohibited. Moreover, the following statements apply:
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Kinexon 2015. This document is confidential and contains information which is proprietary to Kinexon GmbH. No reproduction is permitted without prior express written permission of the author (info@kinexon.com).
- CONFIDENTIAL -
3 Increase the separation between the equipment and receiver. Reorient or relocate the receiving antenna. Connect the equipment to an outlet on a circuit different from that to which Consult the dealer or an experienced radio/TV technician for help. the receiver is connected. Important Notice This equipment may only be operated as a handheld device. Operation with fixed outdoor antennas is prohibited and could subject the operator to serious legal penalties. The Kinexon Receiver will only operate (i.e. transmit UWB signals) when activated within a Kinexon network. RF Exposure Notice This device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves adopted by the FCC. These limits include a substantial safety margin design to assure the safety of all persons, regardless of age and health. The radio wave exposure guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. SAR levels have been computed for the transmitters in this device and have been found to be below FCC limits. Safety Information Read and follow all instructions before using the Kinexon Receiver. Never open the case of the Kinexon Receiver. There are no user serviceable parts or replaceable parts inside the case. Do not use the Kinexon Receiver if it has been damaged. Kinexon 2015. This document is confidential and contains information which is proprietary to Kinexon GmbH. No reproduction is permitted without prior express written permission of the author (info@kinexon.com).
- CONFIDENTIAL -
4