FCC ID: 2ALC5-KNX-IREC2 UWB Anchor

▪

▪

▪

▪

▪

▪

▪

▪

USER MANUAL KINEXON Receiver (Anchor) Indoor Application Version 1.2 1 KINEXON 2019. This document is confidential and contains information which is proprietary to KINEXON GmbH. No reproduction is permitted without prior express written permission of the author (info@kinexon.com). KINEXON RECEIVER The KINEXON Anchors are reference points for the tracking sensors that are posi-

tioned around a desired area. They send and receive signals from the sensors and transmit the information to the Edge server in real-time. SPECIFICATIONS Material Dimensions Weight Power Supply Battery Lifetime Charging Temperature Communication Please use only the following types of batteries (supplied by KINEXON). The respec-

tive temperature limits need to be respected:

ABS+PC blend 130 x 130 x 45 mm 270 g (incl. antennas, without battery) Battery PoE (48V, 6.5W) Cable/Side contacts (12-24 V, induces charging) 5.0 hours (active, two channels) 6.5 hours (active, one channel) 15 days (sleep) 4 hours (100%), 2 hours (50%)

-25 85 C (no battery inserted) 2.4/5 GHz (Wifi) 3.23738-6.81013 GHz (UWB) 100Base-TX Ethernet BATTERY Operational mode Temperature range

(A-08 with battery) Keepower Charging 0C to +30C P1834J Non-charging

-20C to +50C 2 KINEXON 2019. This document is confidential and contains information which is proprietary to KINEXON GmbH. No reproduction is permitted without prior express written permission of the author (info@kinexon.com). RECEIVER MOUNTING The KINEXON Receiver will only be placed in-

doors, where it will be usually mounted on walls or on tripods. KINEXON offers dedicated mounting mechanisms. Alternatively, the Receiv-

ers can be mounted on tripods in case that mounting on walls is not possible. REGULATORY AND LEGAL INFORMATION The KINEXON Receiver has been designed to be in compliance with both the U.S. FCC Part 15 subpart F regulations, sections 15.517 and 15.521 and with the European Un-

ion ETSI EN 302 065 standards. Two different versions of the KINEXON Receiver are available, one version supports the FCC emissions mask (Region 1) and the second supports the ETSI standard mask (Region 2). DISCLAIMER The information in this document is subject to change without notice. KINEXON GmbH assumes no responsibility for inaccuracies or omissions and specifically disclaims any liabilities, losses, or risks, personal or otherwise, incurred as a conse-

quence, directly or indirectly, of the use or application of any of the contents of this document. For the latest documentation, contact KINEXON GmbH. INTENDED USE This manual describes the setup and use of the KINEXON Receiver. Use this product only for the purpose it was designed for. 3 KINEXON 2019. This document is confidential and contains information which is proprietary to KINEXON GmbH. No reproduction is permitted without prior express written permission of the author (info@kinexon.com). FCC COMPLIANCE This device complies with 47 CFR Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This device may not be employed for the operation of toys. Operation onboard an aircraft, a ship or a satellite is prohibited. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are de-

signed to provide reasonable protection against harmful interference in a residen-

tial installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be de-

termined by turning the equipment off and on, the user is encouraged to try to cor-

rect the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. IMPORTANT NOTICE This equipment may only be operated indoors. Operation outdoors is in violation of 47 U.S.C. 301 and could subject the operator to serious legal penalties. At any time, a minimum separation of 20 cm must be maintained from the operating device and any person or persons. The KINEXON Receiver will only operate (i.e. transmit UWB signals) when activated within an indoor KINEXON network. This network needs to be professionally in-

stalled, and must be configured to cover only the volume indoors, preventing the KINEXON Receiver from emitting UWB signals outdoors. Contact KINEXON GmbH if you are unsure about the extent of coverage of your network system. RF EXPOSURE NOTICE This device is a radio transmitter and receiver. It is designed not to exceed the limits for exposure to radio waves adopted by the FCC. These limits include a sub-

stantial safety margin design to assure the safety of all persons, regardless of age and health. The radio wave exposure guidelines use a unit of measurement known as the Specific Absorption Rate, or SAR. SAR levels have been computed for the transmitters in this device and have been found to be below FCC limits. SAFETY INFORMATION The device is intended to be supplied from a Limited Power Source (LPS) whose power consumption should not exceed 40 VA and current rating of overcurrent pro-

tective device should not exceed 2.5 A. Read and follow all instructions before using the KINEXON Receiver. Never open the case of the KINEXON Receiver. There are no user serviceable parts or replaceable parts inside the case. Do not use the KINEXON Receiver if it has been damaged. 4 KINEXON 2019. This document is confidential and contains information which is proprietary to KINEXON GmbH. No reproduction is permitted without prior express written permission of the author (info@kinexon.com).

EUI: 38289 Model: A-08 Code: LeeDjX62 FCC ID: 2ALC5-KNX-IREC2 Contains FCC IDs: TFB-1004, X8WBT840 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. For indoor use only. 12-24V 12-24V Powered by TCPDF (www.tcpdf.org)

i: [me] EU: s9408 KINEXON Model: A-08 Code: LGAQjHbF KINEXON GmbH El >= C 12-24V Schellingstr. 35 il 80799 Munich, Germany

CSA Confidential Authority to Act as Agent Date: January 14, 2020 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern:

We the undersigned, hereby authorize CSA Group Bayern GmbH, Ms. Christa Jaeger, Ohmstrasse 1-4, 94342 Strasskirchen, Germany to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by CSA Group Bayern GmbH on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Kinexon Inc. By:

Title:

On behalf of: Kinexon Inc. Telephone:

Email:

__________________________ Mehdi Bentanfous

(347) 630-0208 mehdi.bentanfous@kinexon.com

(Signature1) CEO 1 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

CSA Confidential Date: January 14, 2020 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Attn: OET Dept. Ref: FCC Class II Permissive change for FCC ID: 2ALC5-KNX-IREC2 Dear Examiner, This is to request a Class II permissive change for FCC ID: 2ALC5-KNX-IREC2 The major change filed under this application is:

Original Grant date: 06/19/2019 Applicant: Kinexon Inc. distance applications. All other hardware is the same as originally granted. If you have any questions regarding this application, please feel free to contact me. Sincerely, Signature Mehdi Bentanfous CEO Kinexon Inc. Addition of a new directional UWB antenna type with higher gain (peak gain 9 dBi) for long

CSA Confidential Request for Confidentiality Date: April 1st, 2020 Subject: Confidentiality Request for FCC ID: 2ALC5-KNX-HREC2 + FCC ID: 2ALC5-KNX-IREC2 Pursuant to FCC 47 CRF 0.457(d) and 0.459, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent*1 Permanent Permanent Permanent Permanent Permanent*3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Users Manual Kinexon Inc. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

(Signature2) Mehdi Bentanfous CEO 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

Authority to Act as Agent Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 SKM OUm IME meoncaue We the undersigned, hereby authorize CSA Group Bayern GmbH, Ms. Bettina Stangl, Ohmstrasse 1-4, 94342 Strasskirchen, Germany to act on our behalf in all manners relating to application for equipment authorization, including signing of all documents relating to these matters. Any and all acts carried out by CSA Group Bayern GmbH on our behalf shall have the same affect as acts of our own. This authorization is valid until further written notice from Kinexon Sports & Media Inc. Mehdi Bentanfous

(Print name) On behalf of: = Kinexon Sports & Media Inc.

(Company Name) REPEC M RTM artes) ite-timcenttet given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.