FCC ID: 2ALC5-KNX-VTAG1 UWB Intra-logistics Vehicle Tracking Tag

brown blue white green pink yellow black grey red purple grey-pink red-blue Vin+

Vin-

RS232-RX RS485-D+

CANH RS485-D-

VEXT_DIO RS232-TX CANL DIO CL1 CL2 o o

CSA Internal | 3rd Party Label:

Position of the label:

Picture shows a draft label. This label will be replaced by the label above

Product Specification Sheet ERT-A / EF-PWE Printable with resin ribbon (FTA-LHx) for foil labels Extra permanent, top-coated glossy white polyester labels on roll for thermal transfer printers Material Thickness:

Facestock Adhesive Liner (glassine) Adhesive (acrylic):

Shear Strength Initial Tack Peel Resistance Value (Tolerance) 50 22 56 Unit micron micron micron Stainless Steel Glass Polypropylene Paint (automotive) PBT Value 50 673,0 16 19 17 18 16 min. +2

-40 to +150 Unit hours g/cm N/25 mm N/25 mm N/25 mm N/25 mm N/25 mm C C Test Method ASTM D 3652 ASTM D 3652 ASTM D 3652 Test Method FTM 8 ASTM D 2979 FTM 1 (72 hours) FTM 1 (72 hours) FTM 1 (72 hours) FTM 1 (72 hours) FTM 1 (72 hours) Application Temperature Temperature Range (Adhesive)

*no information provided by the manufacturer Certifications: Material meets REACH and RoHS requirements (2011/65/EU), UL recognized repackager file no. E484087, certified for USA and Canada; following inks guarantee the UL status: AXR7+, AXR8, K500. Sea water resistant acc. to BS5609, Sect. 2 tested with Ricoh ribbon B120EC, Sect. 3. IMDS data available. Complies with toys security norm EN 71-3. BPA free. Free of halogens. IMDS data available. Printability: Suited for thermal transfer printing with resin ribbons (i.e. Armor AXR 7+, AXR 8; Labelident resin, Labelident Ultra resin; Zebra 4800, 5095, 5100, Coding TTR). Storage: Material is stable for two years stored at max. 21C and 50% rel. humidity. Damp conditions, excessive heat and/or cold conditions should be avoided. Further Information: Expected exterior life dependant on substrate but label material is outdoor resistant for at least 2 years. This product has a dielectric strength of 9 kV, and will be able to withstand voltages up to this value. The film is also expected to have a Comparative Tracking Index (CTI) of 3, corresponding to a range of 175 249 V. Our supplier, however, does not recommend this film for electrical insulation purposes. Note: All values are guidelines and not intended for use in setting specifications. The information provided does not constitute any warranty, express or implied, and is intended solely for the recipient and shall not be forwarded to any third party. The buyer of our products shall be solely responsible for independently determining if the product conforms to all requirements of their unique application. Samples of our materials can be provided upon request. Information is subject to change without prior notification. Last Updated: January 2019.

CSA Internal | 3rd Party Authority to Act as Agent Date: March 1, 2021 American Certification Body, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 To Whom It May Concern:

CSA Group Bayern GmbH, Ms. Christa Jaeger is authorized to act on our behalf, until otherwise notified, for applications to American Certification Body, Inc. (ACB). We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. We also declare that the information provided to the FCC is true and correct to the best of our knowledge (47 CFR 2.911(d)) and we have been informed of the grantee responsibilities (47 CFR 2.909) with regard to certified equipment. Thank you, This authorization is valid until further written notice from Kinexon Inc. 053019 12 THIS MUST BE SIGNED BY THE APPLICANT/AGENT AND SHOULD BE PLACED ON APPROPRIATE LETTERHEAD CSA Internal | 3rd Party 053019 12

CSA Internal | 3rd Party Date: 2020-09-17 Request for Confidentiality Subject: Confidentiality Request for FCC ID: 2ALC5-KNX-VTAG1 and IC 25557-KNXVTAG1 Pursuant to FCC 47 CRF 0.457(d) and 0.459 and IC RSP-100, Section 12.4, the applicant requests that a part of the subject FCC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent*1 Permanent Permanent Permanent Permanent Permanent*3 Exhibit Block Diagrams External Photos Internal Photos Operation Description/Theory of Operation Parts List & Placement/BOM Tune-Up Procedure Schematics Test Setup Photos Uer Manal KINEXON Inc. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify ACB in the event information regarding the product or the product is made available to the public. ACB will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. NOTE for Industry Canada Applications:

IC currently only distinguishes Permanent Confidentiality exhibits as shown above. Short Term confidentiality is not considered applicable to IC applications. Sincerely, By:

(Signature/Title2) Mehdi Bentanfous CEO 1 - The asterisked items (*) require further information to be provided to ACB before permanent confidentiality will be extended to these exhibits. Please refer to FCC KDB 726920 and the specific Document link for D01 found at:

https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731 and review section II, 3) regarding specific information that must accompany these requests. 2 - Must be signed by applicant contact given for applicant on the FCC site, or by the authorized agent if an appropriate authorized agent letter has been provided. Letters should be placed on appropriate letterhead.

April 7, 2021 RE:

KINEXON, Inc. FCC ID:

IC:

2ALC5-KNX-VTAG1 25557-KNXVTAG1 ATCB026637 After a review of the submitted information, I have a few comments regarding the above referenced Application. Depending on your responses, please note that there may be additional questions. Pursuant Section 15.103(a), digital devices used exclusively on transportation vehicles (which includes forklifts and other vehicles designed to transport people or goods) are exempt from authorization requirements, and are only subject to the general non-interference requirements to which all Part 15 devices are subject. As a result, certification or SDoC would not be an option for an exempted device. In light of this, the Part 15B EMC test report submitted has not yet been reviewed. Please confirm if the EUT will be used exclusively on transportation vehicles or not. If so, then there would be no JAB submittal, and the EUT will only be subject to certification as a UWB transmitter (not a composite device). But, if the EUT may be used in any manner when not installed on a vehicle, then it may (must) obtain certification (or SDoC) as a JAB (I note that the UWB EMC report includes AC line conducted (AClc) data, implying potential non-vehicular usage). In this case, please revise the Operational Description to also describe the non-vehicular usage scenario, and I will then also review the Part 15B test report.

(see comment 9a, below). CSA: Acc. to our clients information the Vehicle Tag is typically used on moving vehicles, where it is powered by the power supply of the vehicle. However, in selected use cases, it could also be mounted on large, moving machinery. Imagine a conveyor system on an assembly line with moving parts which may be tracked with the vehicle tags. In that case, the vehicle tag may indirectly be connected to the power grid.

KINEXON Munich, 2022-01-21 Dear Sir or Madam, I'm happy to elaborate on how the KINEXON Vehicle Tag satisfies the requirements of 15.519(a)(1). :

As described in the Operation Description, the Vehicle Tag will only transmit when it is associated to a KINEXON RTLS or to another KINEXON tag. It will listen for beacons transmitted by the KIN-

EXON anchors or KINEXON SafeTags before transmitting. It will cease transmission within 10 s if no anchor beacons are received or if no acknowledgements from associated tags are received. The test report compiled by CSA shows this signal deactivation in section 5.6. Kind regards, WV. Hedy Dr. Julian Habigt Head of Sensor Network Engineering KINEXON GmbH KINEXON