FCC ID: RGB-52BVDD 52 in Campbell, 91350/91359

Item #1002 706 090, 1002 707 960 Model #91350, 91359 UL Model #52-BVD USE AND CARE GUIDE CAMPBELL 52-INCH CEILING FAN Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM To view an instructional video on how to install this product:

1. Go to www.homedepot.com and enter either the Item or Model number, found in the top right corner of the cover of this instruction manual, in the search field. 2. Click on your product from the list of search results and click on the video link in the Product Overview section. We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this ceiling fan. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home improvement needs. THANK YOU Thank you for choosing Hampton Bay!

Table of Contents Table of Contents ................................................................ 2 Assembly .............................................................................. 7 Safety Information ............................................................... 2 Operation ........................................................................... 15 Warranty ............................................................................... 3 Care and Cleaning ............................................................. 16 Pre-Installation .................................................................... 3 Troubleshooting ................................................................. 16 Installation ............................................................................ 6 Safety Information 1. To reduce the risk of electric shock, ensure the electricity has been turned off at the circuit breaker or fuse box before you begin. 2. All wiring must be in accordance with the National Electrical Code ANSI/NFPA 70-1999 and local electrical codes. Electrical installation should be performed by a qualified licensed electrician. 3. The outlet box and support structure must be securely mounted and capable of reliably supporting 35 lbs. (15.9 kg). Use only UL Listed outlet boxes marked Acceptable for Fan Support of 35 lbs. (15.9 kg) or less. 4. CAUTION:The fan must be mounted with a minimum of 7 ft. (2.1 m) clearance from the trailing edge of the blades to the floor. 5. Do not operate the reversing switch while the fan blades are in motion. You must turn the fan off and stop the blades before you reverse the blade direction. 6. Do not place objects in the path of the blades. 7. To avoid personal injury or damage to the fan and other items, use caution when working around or cleaning the fan. 8. Electrical diagrams are for reference only. Light kits that are not packed with the fan must be UL-listed and marked suitable for use with the model fan you are installing. Switches must be UL General Use Switches. Refer to the instructions packaged with the light kits and switches for proper assembly. 9. After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box. 10. All setscrews must be checked and retightened where necessary before installation. 2 WARNING: To reduce the risk of personal injury, do not bend the blade brackets (also referred to as flanges) during assembly or after installation. Do not insert objects in the path of the blades. WARNING: Remove the rubber motor stops on the bottom of the fan before installing the blades or testing the motor. WARNING: To reduce the risk of electric shock, this fan must be installed with an isolating wall switch. WARNING: To reduce the risk of fire, electric shock, or personal injury, mount to outlet box marked Acceptable for fan support of 35 lbs. (15.9 kg) or less, and use the screws provided with the outlet box. WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician. WARNING: Electrical diagrams are for reference only. Optional use of any light kit shall be UL-listed and marked suitable for use with this fan. WARNING: To reduce the risk of fire or electric shock, this fan should only be used with fan speed control part no. AP-3RDL manufactured by DawnSun Electronic Technology Co., Ltd. Zhongshan. CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Warranty The supplier warrants the fan motor to be free from defects in workmanship and material present at time of shipment from the factory for a lifetime after the date of purchase by the original purchaser. The supplier also warrants that all other fan parts, excluding any glass or acrylic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior model if the product is returned. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product are your responsibility. Damage to any part, such as by accident, misuse, improper installation, or by affixing any accessories, is not covered by this warranty. Because of varying climatic conditions this warranty does not cover any changes in brass finish, including rusting, pitting, corroding, tarnishing, or peeling. Brass finishes of this type give their longest useful life when protected from varying weather conditions. A certain amount of wobble is normal and should not be considered a defect. Servicing performed by unauthorized persons shall render the warranty invalid. There is no other express warranty. Hampton Bay hereby disclaims any and all warranties, including but not limited to those of merchantability and fitness for a particular purpose to the extent permitted by law. The duration of any implied warranty which cannot be disclaimed is limited to the time period as specified in the express warranty. Some states do not allow a limitation on how long an implied warranty lasts, so the above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with product use or performance except as may otherwise be accorded by law. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion or limitation may not apply to you. This warranty gives specific legal rights, and you may also have other rights which vary from state to state. This warranty supersedes all prior warranties. Shipping costs for any return of product as part of a claim on the warranty must be paid by the customer. Contact the Customer Service Team at 1-855-HD-HAMPTON or visit www.HamptonBay.com. Pre-Installation SPECIFICATIONS Size Speed Volts Amps Watts RPM CFM Net Weight Gross Weight Cube Feet 52 in. Medium 120 Low High 0.20 0.33 0.50 12 28 59 60 105 160 2126 3182 4760 18.3 lbs

(8.3 kg) 21.6 lbs

(9.8 kg) 1.66 NOTE: These are approximate measures. They do not include the amps and wattage used by the light kit. TOOLS REQUIRED Phillips screwdriver Flat blade screwdriver Adjustable wrench Electrical tape Wire cutter Step ladder 3 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance. Pre-Installation (continued) HARDWARE INCLUDED NOTE: Hardware not shown to actual size. AA BB CC DD EE FF Part Description Quantity Part Description Quantity AA BB CC Extra blade bracket screw Extra lock washer Plastic wire connector 1 1 3 DD EE FF Hanger pin Locking pin Rubber gasket 1 1 1 4 Pre-Installation (continued) PACKAGE CONTENTS A B C D E F G H I J K O P I P D N O 4 3 2 1 Part Description Quantity Part Description Quantity A B C D E Slide-on mounting bracket

(inside canopy) Ball/downrod assembly Canopy Fan-motor assembly Light kit fitter assembly 1 1 1 1 1 IMPORTANT: This product and/or components are governed by one or more of the following U.S. Patents:

5,947,436; 5,988,580; 6,010,110; 6,046,416, 6,210,117 and other patents pending. F G H I J K O P Blade Blade bracket

(with pre-installed screws) Glass shade LED bulbs (9 Watt maximum) Remote control (battery included) Receiver Lead wire Battery 5 5 3 3 1 1 1 1 5 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance. Installation MOUNTING OPTIONS WARNING: To reduce the risk of fire, electric shock or personal injury, mount to an outlet box marked Acceptable for fan support of 35 lbs. (15.9 kg) or less, and use the screws provided with the outlet box. An outlet box commonly used for the support of lighting fixtures may not be acceptable for fan support and may need to be replaced. If in doubt, consult a qualified electrician. If your ceiling fan does not have an existing UL-listed mounting box, then install one using the following instructions:

Disconnect the power by removing the fuses or turning off the circuit breakers. Secure the outlet box directly to the building structure. Use the appropriate fasteners and materials. The outlet box and its bracing must be able to fully support the weight of the moving fan (at least 35 lbs.). Do not use a plastic outlet box. The illustrations below show three different ways to mount the outlet box. NOTE: You may need a longer downrod to maintain proper blade clearance when installing on a steep, sloped ceiling. The maximum angle allowable is 20 away from horizontal. Hanger Bar Outlet Box If the canopy (C) touches the ball/downrod assembly (B), then remove the decorative canopy bottom cover and turn the canopy (C) 180 before attaching the canopy (C) to the mounting plate. To hang your fan where there is an existing fixture but no ceiling joist, you may need an installation hanger bar as shown above

(available at any Home Depot store). Outlet Box Outlet Box Provide Strong Support Recessed Outlet Box Ceiling Mounting Plate 6 Assembly - Standard Ceiling Mount 1 Preparing for standard mounting 2 Routing the wires Make sure the slot openings are on top and route the wires exiting the top of the fan-motor assembly (D) through the canopy (C) and the canopy ring (L) and then through the ball/downrod assembly (B). Remove the canopy ring (L) from the canopy (C) by turning the ring counter-clockwise until it unlocks. Remove the mounting bracket (A) from the canopy (C) by loosening the two canopy screws (JJ) located in the L shaped slots. Remove and save the two canopy screws (II) in the round holes. This will enable you to remove the mounting bracket

(A). JJ II A C L 3 Assembling the fan WARNING: Failure to properly install the locking pin (EE) could result in the fan becoming loose and possibly falling. Loosen, but do not remove, the setscrews (HH) on the collar on top of the fan-motor assembly (D). Align the holes at the bottom of the ball/downrod assembly

(B) with the holes in the collar on top of the fan-motor assembly (D). Carefully inset the hanger pin (DD) through the holes in the collar and ball/downrod assembly (B). Be careful not to jam the hanger pin (DD) against the wiring inside the ball/

downrod assembly (B). Insert the locking pin (EE) through the hole near the end of the hanger pin (DD) until it snaps into its locked position. Re-tighten the setscrews (HH) on the collar on top of the fan-motor assembly (D). DD 7 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance. C L B D B EE HH D Assembly - Close-To-Ceiling Mount 1 Preparing for mounting Remove canopy ring (L) from the canopy (C) by turning the ring 2 counter-clockwise until it unlocks. Remove the mounting bracket (A) from the canopy (C) by loosening the two canopy screws (JJ) located in the L shaped slots Remove and save the two canopy screws (II) in the round holes. This will enable you to remove the mounting bracket (A). Remove the decorative canopy bottom cover (M) from the canopy (C) by pressing the three studs located inside the bottom of the canopy. Routing the wires Remove three of the six screws and lock washers (QQ) (every other one) securing the motor collar (N) to the top of the fan-

motor assembly (D). Place the rubber gasket (FF) over the remaining three screws, route the wires exiting the top of the fan-motor assembly (D) through the canopy (C) and canopy ring (L) (make sure the slot openings are on top), and then place the canopy (C) over the collar at the top of the fan-motor assembly (D). Align the mounting holes with the holes in the motor and fasten using the three screws and lock-washers (QQ) removed previously. Tighten the mounting screws securely. JJ II A C M L QQ L C FF N D Assembly - Hanging the Fan 1 Attaching the fan to the electrical box WARNING: To reduce the risk of fire, electric shock or personal injury, mount to an outlet box marked Acceptable for fan support of 35 lbs. (15.9 kg) or less, and use the screws provided with the outlet box. Pass the 120-Volt supply wires through the center hole in the slide-on mounting bracket (A). Install the slide-on mounting bracket (A) on the outlet box by sliding the slide-on mounting bracket (A) over the two screws (TT) provided with the outlet box. If necessary, use leveling washers

(not included) between the slide-on mounting bracket (A) and the outlet box. The flat side of the slide-on mounting bracket (A) should face toward the outlet box, as shown. Securely tighten the two mounting screws (TT). 8 TT TT A Assembly - Hanging the Fan (continued) 2 Hanging the fan 3 Setting the code on the remote control and receiver WARNING: The hook (XX) is only to balance the fan while making the electrical connections. Failure to hang as shown may result in the hook (XX) breaking, causing the fan to fall. The hook must pass from the inside to the outside of the canopy. WARNING: When hanging the fan on the hook (XX) it is critical that you use one of the non-slotted (round) holes in the canopy (C). Carefully lift the fan-motor assembly (D) up to the slide-on mounting bracket (A). Insert the ball portion of the ball/downrod assembly into the socket of the slide-on mounting bracket. Turn the ball/downrod assembly clockwise until it is seated with the tab of the slide-on mounting bracket aligned with the slot in the ball. If using close-to-ceiling mounting, hang the fan on the hook provided by utilizing one of the holes at the outer rim of the ceiling canopy (C). Close to ceiling mount. Standard mount. NOTE: The frequencies on your receiver and remote control have been preset at the factory. Before installing the receiver, make sure the dip switches on the receiver and remote control are set to the same frequency. The dip switches on the remote control are located inside the battery compartment. NOTE: The battery will weaken with age and should be replaced before leaking takes place, as this will damage the remote control. Dispose of used batteries properly and keep batteries out of the reach of children. NOTE: The switch marked O/D controls the dimming function of the lights. If using non-dimmable bulbs, use a ballpoint pen or small screwdriver to set the switch to O to disable the dimming function. If using dimmable bulbs, set the switch to D to enable the dimming function. Remove the remote control (J) battery cover by pressing firmly on the arrow and sliding the cover off. Slide the dip switches (ZZ) to your choice of either up or down. The factory setting is up. Slide the dip switches (ZZ) on the receiver (K) to the same position as set on the remote control (J). Install the 23A 12V battery (P) (included). Replace the battery cover on the remote control (J). Insert the silicone rubber stopper (PP) into the hole on the receiver (K) to cover the dip switches. A B C L D XX A C L D XX O D ZZ J ON 1 2 3 4 PP K 1234 ONDIP 9 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance. Assembly - Hanging the Fan (continued) 4 Installing the receiver 5 Wiring the receiver to the household wiring WARNING: To reduce the risk of fire or electric shock, remember to disconnect power. The electrical wiring must meet all local and national electrical code requirements. The electrical source and fan must be 110/120 volt, 60Hz. Do not use this product in conjunction with any variable wall control. Incorrect wire connection can damage this receiver. CAUTION: If other fan wires are a different color, have this unit installed by a licensed electrician. CAUTION: Do not install the receiver in a damp location or immerse in water (For indoor use only). Do not pull on or cut the receiver leads shorter. Do not drop or bump the unit. Position the house supply wires (AAA) to one side of the slide-on mounting bracket (A); position the fan wires (BBB) to the opposite side. Insert the narrow end of the receiver (as shown, flat side towards the ceiling) into the slide-on mounting bracket until it rests on top of the ball/downrod assembly. WARNING: To avoid possible electrical shock, turn the electricity off at the main fuse box before wiring. If you feel you do not have enough electrical wiring knowledge or experience, contact a licensed electrician. WARNING: Each wire not supplied with this fan is designed to accept up to one 12-gauge house wire and two wires from the fan. If you have larger than 12-gauge house wiring or more than one house wire to connect to the fan wiring, consult an electrician for the proper size wire nuts to use. IMPORTANT: Use the wire connecting nuts (CC) supplied with your fan. Secure the connectors with electrical tape and ensure there are no loose strands or connections. Spread the wires apart so that the green and white wires are on one side of the outlet box and the black wire is on the other side. Connect the green fan wires to the household ground wire

(this may be a green or bare wire) using a wire connecting nut (CC). Connect the receiver black (or red) wire to the household black (hot) wire using a wire connecting nut (CC). Connect the receiver (K) white wire to the household white wire (neutral) wire using a wire connecting nut (CC). Secure each wire connecting nut using electrical tape. Outlet Box CC (x3) Black Black Green (or Bare) White Green Receiver (K) correctly positioned in the mounting bracket J K C AAA B BBB Receiver Antenna ON DIP 1 2 3 4 K 10 Assembly - Hanging the Fan (continued) 6 Making the electrical connections 7 NOTE: The fan comes with 12 in. lead wires for use with the provided 4.5 in. ball downrod assembly (B), if you wish to use longer downrod, you can use the extension lead wire (42 in.) (O) provided. If using the 4.5 in. ball downrod assembly (B) provided, wire the receiver to the fan wires by connecting the molded adaptor plug from receiver (K) with molded adaptor of the fan motor assembly (D) together. If you wish to use longer downrod, you can use the extension lead wire (42 in.) (O) provided by connecting the molded adaptor together. Mounting the fan-motor assembly

(standard mount) WARNING: When using the standard ball/downrod mounting, the tab in the ring at the bottom of the mounting bracket must rest in the groove of the hanger ball. Failure to properly seat the tab in the groove could cause damage to the wiring. WARNING: The locking slots of ceiling canopy are provided only as an aid to mounting. Do not leave the fan assembly unattended until all four canopy screws are engaged and firmly tightened. Align the locking slots of the ceiling canopy (C) with the two screws in the mounting bracket (A). Push up to engage the slots and turn clockwise to lock in place. Firmly tighten the two mounting screws. Install the two mounting screws (saved from Assembly Step 1 Preparing for mounting) into the holes in the canopy (C) and tighten firmly. Install the decorative canopy ring (L) by aligning the rings slots with the screws in the canopy (C). Rotate the ring clockwise to lock in place. A J ON DIP 1 2 3 4 JJ L C D Outlet box in the ceiling

(MM) Green O 11 HAMPTONBAY.COM Please contact 1-855-HD-HAMPTON for further assistance. Assembly - Hanging the Fan (continued) 8 Mounting the fan-motor assembly

(close-to-ceiling mount) A WARNING: The locking slots of ceiling canopy are provided only as an aid to mounting. Do not leave the fan assembly unattended until all four canopy screws are engaged and firmly tightened. Carefully unhook the fan from the mounting bracket (A) and align the locking slots of the ceiling canopy (C) with the two screws in the mounting bracket (A). Push up to engage the slots and turn clockwise to lock in place. Immediately tighten the two mounting screws firmly. Install the two mounting screws (saved from Assembly Step 1 Preparing for mounting into the holes in the canopy (C) and tighten firmly. Install the decorative canopy ring (M) by aligning the rings slots with the screws in the canopy (C). Rotate the ring clockwise to lock in place. You may now proceed to attaching the fan blades. JJ L C D Assembly - Attaching the Fan Blades 1 Attaching the blade brackets to the motor 2 NOTE: Your fan features revolutionary advancements for quick and easy blade installation. NOTE: Your fan blades are reversible. Select the blade side finish which best accentuates your decor. Fasten the blade bracket (G) to the fan-motor (D) by insert-

ing the alignment post into the slot on the bottom of the fan-motor (D) and tightening the fan-motor screws. The fan-motor screws are pre-attached to the blade bracket (G). Repeat this procedure for the remaining four blade brackets (G). Attaching the blades Mount the fan blade (F) to the blade bracket (G) by aligning the three key-slot holes in the blade (F) with the three posts on the top of the blade bracket (G). Hold the blade (F) with both hands close to the blade bracket

(G) and press the blade (F) down firmly. Ensure the key-slot holes are properly seated on the blade bracket (G) posts. While still holding the blade (F) down with both hands, firmly slide the blade (F) away from the fan-motor (D) housing until the blade (F) engages in the locking mechanism. Make sure the steel locking mechanism at the rear of the blade bracket

(G) springs upward and butts against the edge of the blade

(F), indicating a secure connection. Visually inspect the top of the blade bracket (G) to ensure the locking mechanism is securely in place. Repeat this procedure for the remaining blades (F). D F D G G 12 Assembly - Attaching the lights 2 1 Attaching the light kit fitter assembly CAUTION: To reduce the risk of electric shock, disconnect the electrical supply circuit to the fan before installing the light fixture. NOTE: Notice the location of the fans slide switch. This is the switch used to change the fans directional rotation. For more information on the operation of this switch, see Operating Your Fan and Remote Control on page 15. NOTE: If you need an extra switch cup (or cover) for the non-light option, please call 1-855-HD-HAMPTON

(M-F 9:00am to 4:30pm EST). Remove the three screws (RR) on the switch cup cover of the light kit fitter assembly (E). Connect the wires from the light kit fitter assembly (E) to the wires from the switch cup of the fan-motor assembly (D) by connecting the molded adaptor plugs together (blue to black, white to white). Carefully tuck all wires and splices into the switch cup. Align the three holes in the switch cup cover of the light kit fitter assembly (E) with the three holes in the switch cup of the fan-motor assembly (D). Make sure the notch in the switch cup cover of the light kit fitter assembly (E) clears the reversing switch in the switch cup of the fan-motor assembly

(D). Position the light kit fitter assembly (E) and re-install the three screws (RR) that were removed in first step to secure the light kit fitter assembly (E). TT D RR E Installing the glass shades and bulbs WARNING: Allow the glass shades to cool completely before removing. CAUTION: Make sure the power is off before attaching or removing the glass shades. Insert the glass shade (H) into the light kit fitter assembly

(E) glass holder by carefully squeezing the steel tensioners

(TT) on the light kit fitter assembly (E) socket together. Gently slide the glass shade (H) over the steel tensioners

(TT). Make sure the glass shade (H) is fully inserted into the socket for a secure fit. Repeat this procedure for the remaining glass shades (H). With the power off, install the light bulbs (I) into the light bulb sockets. D E H I 13 Operation OPERATING YOUR FAN Your fan is equipped with a remote control to operate the fan speed and lights of your new ceiling fan. The speed setting for warm or cool weather depends on factors such as the room size, ceiling height, number of fans and so on. The fan is shipped from the factory with the reversing switch positioned to circulate air downward. If airflow is desired in the opposite direction, turn your fan off and wait for the blades to stop turning, then slide the reversing switch (located in switch cup) to the opposite position, and turn the fan on again. The fan blades will turn in the opposite direction and reverse airfow. NOTE: Wait for the fan to stop before reversing the direction of the blade rotation. Warm weather - (Forward) A downward airflow creates a cooling effect. This allows you to set your air conditioner on a higher setting without affecting your comfort. Cool weather - (Reverse) An upward airflow moves warm air off of the ceiling. This allows you to set your heating unit on a lower setting without affecting your comfort. USING THE REMOTE CONTROL 1. Power ON/OFF. - Press and release the button to turn the fan and light on or off. 2. Fan Speed - LEDs on the fan speed button will illuminate to the corresponding speed.

- Press and release 1 time - turns the fan on high speed.

- Press and release 2 times - turns the fan on medium speed.

- Press and release 3 times - turns the fan on low speed.

- Press and release 4 times - turns the fan off. Light ON/OFF 3. Press and release the Press and hold the button to turn the light on or off. button to activate the dimmer function (as long as you have NOT previously set O/D dip switch in your remote to the ON position). 14 Care and Cleaning WARNING: Make sure the power is off before cleaning your fan. Because of the fans natural movement, some connections may become loose. Check the support connections, brackets, and blade attachments twice a year. Make sure they are secure. It is not necessary to remove the fan from the ceiling. Clean your fan periodically to help maintain its new appearance over the years. Do not use water when cleaning, as this could damage the motor, or the wood, or possibly cause an electrical shock. Use only a soft brush or lint-free cloth to avoid scratching the finish. The plating is sealed with a lacquer to minimize discoloration or tarnishing. You can apply a light coat of furniture polish to the wood for additional protection and enhanced beauty. Cover small scratches with a light application of shoe polish. You do not need to oil your fan. The motor has permanently-lubricated sealed ball bearings. Troubleshooting Problem The fan will not start. The fan is noisy. The fan wobbles. Solution Check the main and branch circuit fuses or breakers. Check to make sure the wall switch is in the on position, if applicable. Check the line wire connections to the fan and switch wire connections in the switch housing. Check the battery in the remote control. Ensure you are in the normal range of 10-20 feet. Ensure the dip switch settings are the same on the remote control and receiver. Remember to turn off the power supply before checking the dip switches settings. Ensure all motor housing screws are snug. Ensure the screws that attach the fan blade bracket to the motor hub are tight. Ensure the wire nut connections are not rattling against each other or the interior wall of the switch housing. Allow a 24-hour breaking in period. Most noises associated with a new fan disappear during this time. If you are using the ceiling fan light kit, ensure the screws securing the glassware are tight. Check that the light bulbs are also secure. Ensure the canopy is a short distance from the ceiling. It should not touch the ceiling. Ensure your outlet box is secure and rubber isolator pads were used between the mounting plate and outlet box. Check that all blade and blade arm screws are secure. Most fan wobble problems are caused when blade levels are unequal. Check this level by selecting a point on the ceiling above the tip of one of the blades. Measure from a point on the center of the blade to the point on the ceiling. Rotate the fan until the next blade is positioned for measurement, and measure from the same point on each blade to the ceiling. Repeat for each blade. Any measurement deviation should be within 1/8 in. Run the fan for ten minutes. If the fan continues to wobble please contact Hampton Bay Customer Service and a balancing kit will be sent to you at no charge. 15 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

--Reorient or relocate the receiving antenna.

--Increase the separation between the equipment and receiver.

--Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

--Consult the dealer or an experienced radio/TV technician for help. CAUTION:

Any changes or modifications not expressly approved by the grantee of this device could void the users authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. Questions, problems, missing parts? Before returning to the store, call Hampton Bay Customer Service 8 a.m. - 6 p.m., EST, Monday-Friday 1-855-HD-HAMPTON HAMPTONBAY.COM Retain this manual for future use.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.

September 18, 2020 Federal Communications Commission Authorization & Evaluation Division 7345 Oakland Mills Road Columbia, Maryland 21046 Authority to Act as Agent On our behalf, I appoint Shenzhen Timeway Testing Laboratories/ Zone C, 1st Floor, Block B, Jun Xiang Da Building, Zhongshan Park Road West, Tong Le Village, Nanshan District, Shenzhen, China (Name of Agent company name and address) to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the Federal Communications Commissions regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for certification, still resides with K i n g o f F a n s , I n c . / 1951 N.W. 22nd Street, Fort Lauderdale, FL33311, USA

<Signature>

NameCharles Bucher TitleVP of Engineering CompanyKing of Fans, Inc.

November 18, 2020 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: RGB-52BVDD Product Name: 52in Campbell, 91350/91359 Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:

Schematics Block diagram Operation description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors.

<Signature>

NameCharles Bucher TitleManager CompanyKing of Fans, Inc.