User Manual PARTY SPEAKER Model No.: TY-ASC65. Model No.: KP686T Read this booklet thoroughly before using and save it for future reference Unit must be fully charged before use FCC Warnings Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class b digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio may cause harmful interference to radio communications. HOWEVER, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. additional Warnings and Precautions CAUTON: To PREVENT ELECTRIC SHOCK, MATCH WIDE NLADE OF PLUG TO WIDE SLOT, FULLY INSERT. mains plug is used as disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the mains completely, the mains plug should be disconnected from the mains socket outlet completely. Warning: shock hazard - Do not open. Warning: To reduce the risk of fire or electric shock, do not expose this apparatus to rain, moisture, dripping, or splashing. Objects filled with liquids, such as vases, shall not be placed on the apparatus. 1 CAUTION: use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. Warning: Do not place this unit directly onto furniture surfaces with any type of soft, porous, or sensitive finish. As with any rubber compound made with oils, the feet could cause marks or staining where the feet reside. We recommend using a protective barrier such as a cloth or a piece of glass between the unit and the surface to reduce the risk of damage and/or staining. Caution: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. Warning: There is a danger of explosion if you attempt to charge standard alkaline batteries in the unit. only use rechargeable NIMH batteries. Battery shall not be exposed to excessive heat such as sunshine, fire or the like. Caution marking is located at the rear or bottom of the apparatus. The marking information is located at the rear or bottom of the apparatus. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. Do not mix old and new batteries. Completely replace all old batteries with new ones. Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries. Batteries should be recycled or disposed of per state and local guidelines. WARNING: This product may contain chemicals known to the state of California to cause birth defects, or other reproductive harm (California Prop 65). Wash hands after handling. This product meets and complies with all Federal regulations. Warning: Do NOT INGEST BSTTERY, 2 Warning: To reduce the risk of electric shock, do not remove cover (or back). NO user-serviceable parts inside. Refer RISK servicing to qualified service personnel The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol indicates that this product incorporates double insulation between hazardous mains voltage and user accessible parts. IC Notice:
This device complies with Canada Industry licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference. and (2) this device must accept any interference. Including interference that may cause undesired operation of the device. CAN ICES-3 (B) 3 Le prsent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exem pts de licence L'exploitation est autorise aux deux conditions suivantes:
1) I'appareil ne doit pas produire de brouillage, et 2) I'utillsateur de I'appareil doit accepterbrouillage radiolectrique subi meme si le brouillage est susceptible d'encompromettre le fonctionnement. mauvais fonctionnement de I'appareil. NMB-3 (B) 4 IC Notice:
- This device complies with Canada Industry licence-exempt RSS standard(s). Operation is subject to the following two conditions:
- (1) this device may not cause interference; and
- (2) this device must accept any interference. Including interference that may cause undesired operation of the device.
- CAN ICES-3 (B) Avis dIndustrie Canada Le prsent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exem pts de licence L'exploitation est autorise aux deux conditions suivantes:
1) I'appareil ne doit pas produire de brouillage; et 2) I'utillsateur de I'appareil doit accepter brouillage radio lectrique subi meme si le brouillage est susceptible d'encompromettre le fonctionnement. mauvais fonctionnement de I'appareil. Cet appareil numriquie de la classe B est conforme la norme NMB-003 du Canada. CAN NMB-3 (B) FCC/IC RF Exposure Radiation Exposure Statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps. The use of apparatus in moderate climate. L'utilisation d'appareils dans un climat modr. Instructions 5 Instructions de scurit importantes 1. Lisez ces instructions. 2. Conservez ces instructions. 3. Respectez tous les avertissements. 4. Suivez toutes les instructions. 5. Ne pas utiliser cet appareil proximit de leau. 6. Nettoyez uniquement avec un chiffon sec. 7. Ne jamais boucher les ouvertures de la ventilation. Installez lunit conformment aux instructions du fabriquant. 8 . Ne pas installer prs dune source de chaleur telle que des radiateurs, des registres de chaleur,
broche de terre. La lame large ou la troisime broche sont fournies pour votre scurit. Lorsque
obsolte. 10. vitez que le cordon dalimentation ne soit pitin ou pinc, en particulier sur les prises, les multiprises et au niveau de la sortie de lappareil.
12. Utilisez uniquement avec le chariot, le stand, le trpied, le support ou la table recommande par le fabricant, ou vendu avec lappareil. Lorsquun chariot est utilis, faites attention lors du dplacement de la combinaison du chariot/appareil pour viter de vous blesser en cas de chute. 13. Dbranchez cet appareil pendant les orages ou lorsquil nest pas utilis pendant une longue priode.
sont endommags, du liquide a t renvers ou des objets sont tombs dans lappareil, lappareil a t expos la pluie ou lhumidit, sil ne fonctionne pas normalement, ou sil est tomb. 15. Avertissement pour rduire le risque dincendie ou de dcharge lectrique : ne pas exposer cet appareil la pluie ou lhumidit. Lappareil doit tre gard labri des gouttes ou des claboussements deau ; ne posez jamais un objet contenant de leau sur cet appareil, par exemple un vase. 16. Le systme dantenne extrieure ne devrait pas tre situ proximit de lignes lectriques ariennes ou dautres circuits dclairage ou dalimentation lectrique, ou un endroit o il peut tomber sur ces lignes ou circuits lectriques. Lors de linstallation dun systme d antenne extrieure, prenez extrmement soin de ne pas toucher ces lignes ou circuits lectriques, car tout contact peut tre fatal. 17. Ne pas surcharger les prises murales et les cbles de rallonge, car cela peut entraner des risques dincendie ou dlectrocution. 18. Ne pas introduire dobjets par les ouvertures de cet appareil, car ils pourraient entrer en contact avec des points de tension dangereux ou court-circuiter des pices qui pourraient provoquer des incendies ou une dcharge lectrique. Ne jamais verser ou pulvriser de liquide quel quil soit sur lunit. 6 Guide to the Appliance Top View 1. 3.5mm AUX IN JACK 2. 6.3mm MIC JACK 1 3. 6.3mm MIC JACK 2 4. POWER ON/OFF BUTTON 5. USB CHARGE PORT 6. LCD DISPLAY 7. FUNCTION BUTTON 8. EQ BUTTON 9. LIGHT BUTTON 10. ECHO BUTTON 11. VOLUME CONTROL 12. P-MODE/M. BUTTON 13.10/MEM./FOLD.+ BUTTON 14. 10/MEM./FOLD.- BUTTON 15.
/TUN.+ BUTTON 16. MIC VOL. CONTROL 17. 18. 19. CHARGE INDICATOR 20. PAIR INDICATOR 21. USB PORT 22. SUPER BASS BUTTON
/TUN.- BUTTON
/PAIR/SCAN BUTTON Front and Back view 23. HANDLE 24. SPEAKERS 25. DECORATION LEDS 26. SPEAKER GRILL 27. DISCO LED LIGHT 28. TWEETERS 29. AC SOCKET 30. VENTILATION HOLES 31. FM ANTENNA 5 Getting Started POWER SOURCE This unit works with rechargeable lead-acid battery (the battery capacity 4000mAh). Fully charge the unit (around 7 hours) before using the product for the first time. The playback time has about 2hours after full charging. Unplug the AC Power cord from the AC socket to work on the battery pack after fully charged. Plugging the AC Power cord while the battery pack is attached initiates the charging of this battery, the charge LED indicator lights red during charging, when the battery is fully charged the indicator will turn to green. When the unit is with low battery, the LED indicator will flash in red. Warning: Do not change the battery, only high-qualified personnel can perform this operation. OPERATION INSTRUCTION BASIC FUNCTION TURNING THE UNIT ON/OFF Press the power ON/OFF button to switch the unit on/off. SETTING THE FUNCTION MODE To change the function modes, press the FUNCTION button repeatedly to choose USB/Bluetooth/AUX/Radio function. ADJUSTING THE VOLUME 1. Rotate the VOLUME knob on the unit to increase or decrease the music volume. 2. Rotate the MIC VOL. knob on the unit to increase or decrease the microphone volume. BASS ADJUSTMENT Press the SUPER BASS button on unit to increase the bass effect. EQUALIZER (EQ) FUNCTION This unit has a built-in equalizer system, Press the EQ button on unit to select a setting that best matches the music style: FLAT, CLASSIC, ROCK, POP and JAZZ. USB CHARGING This unit provides a 5V 1A USB charging port for charging your smart phone. Connect the USB cable of your smart phone to the USB CHARGE port for charging. MICROPHONE ECHO ADJUSTMENT Press the ECHO button on unit turn on or off the microphone echo effect. FLASHING LIGHT There are 9 modes for the DISCO LED lighting. Press the LIGHT button to choose the light modes. The decoration LED light around the speaker will be always auto-changing between different colors smoothly. To inactivate the light, press the LIGHT button until OFF showed on the display. L-1: Blue LED will be on constantly when it is selected. 6 L-2: Red LED will be on constantly. L-3: Green LED will be on constantly. L-4: Purple LED will be on constantly. L-5: Light green LED will be on constantly. L-6: Light blue LED will be on constantly. L-7: White LED will be on constantly. L-8: 7 colors LED flash follow the music rhythm. L-9: 7 colors auto change smoothly There is LED lighting around the volume knobs. Press and hold the LIGHT button to turn on the light. To inactivate the light, press and hold the LIGHT button again. RADIO OPERATION Listen to FM radio broadcasts. Press the FUNCTION button on the unit, the display reads FM and the radio frequency. Note: in order to get the best reception, extend the FM ANT. on the rear of the unit before use to its full length. TUNING TO A RADIO STATION If you know the station frequency that you want to tune to directly:
Tune to a station by press the
/TUN.+ or
/TUN.- button repeatedly. The station frequency is shown on the display. AUTOMATIC TUNING STOP Press and hold the /TUN.-BUTTON or /TUN.+ BUTTON to start tuning, Tuning stop automatically when a station is received. AUTO PRESET MEMORY / SCAN To scan for stations within reception range and save them to preset memory automatically, press and hold the finished scanning, the unit will automatically tune to preset number 1 (P01). To tune to a preset station:
To tune to the next preset station, press the 10/MEM./FOLD.+ button. To tune to the previous preset, press the 10/MEM./FOLD.- button.
/PAIR/SCAN button. After the unit is MANUAL PRESET MEMORY OPERATION Choose which stations to save in preset memory instead of scanning automatically. 1. Use the
/TUN.+ or
/TUN.- button to tune to the station that you want to save as a preset (e.g., 93.1). 2. Press the P-MODE/M. button. will flash on the display to indicate that you are saving the station as Preset Memory 01. (To change the preset memory number, press the 10/MEM./FOLD.+ or 10/MEM./FOLD.- buttons.) 7 3. Press the P-MODE/M. button to finish saving the station (e.g., P01 is now set to 93.1). 4. To save another station, repeat steps 1 to 3. You may save up to 30 FM stations. USB OPERATION This unit provides two USB ports for music playback. 1. Press the FUNCTION button on unit to select USB mode. 2. Plug the USB memory stick to the USB port on top of the unit(The unit can support up to 32G USB device). Playback will start automatically from Track 1. 3. To pause playback, press the
/PAIR/SCAN button on unit. The playing time will flash on the display. 4. To resume playback, press the 5. To select a desired track, press the
/PAIR/SCAN button again. or button respectively during playing until the desired track appears on the display. The unit will start play automatically. 6. To search for a particular passage during playback, press and hold the or button to scan the current playing track at high speed until desired point (passage) appears, then release the button for normal playback mode. 7. To select a song which track number exceeds 10,press the 10/MEM./FOLD.+ or 10/MEM./FOLD.- button each time to skip forward/backward 10 tracks, then press the or button to select desired track. 8. To select a desired folder (if the USB contains more than one folder), press and hold the 10/MEM./FOLD.+ or 10/MEM./FOLD.-button each time to skip forward/backward a folder, then press the button to select desired track. or Important: The USB port is intended for data transfer only, other devices cannot be used with this USB connection. The use of USB extension cords is not recommended. Dont plug the USB from the unit when playing or reading the USB device. REPEAT PLAY You can play one track or all tracks on the USB repeatedly. To Repeat a Single Track 1. Press P-MODE/M. button on unit during play, the display will show and the current track will be played over and over again. 2. To cancel repeat play, press P-MODE/M. button on unit until disappears from the display. To repeat all the Tracks 1. Press P-MODE/M. button on unit until the the USB will be played over and over again. shows steadily on the display, all tracks on 2. To cancel repeat play, press the P-MODE/M. button on unit until disappears from the display. To repeat the folder (only for USB which contains more than one folder) 1. Press the P-MODE/M. button on unit until FOLDER shows steadily on the display, the current folder will be repeated over and over again. 2. To cancel repeat play, press the P-MODE/M. button on unit until FOLDER disappears from the display. 8 RANDOM PLAY Press the P-MODE/M. button on unit in play mode till the RAND shows steadily on the display, the random play will start from next track automatically. Press the P-MODE/M. button on unit again until the RAND disappears from the display to cancel. BLUETOOTH OPERATION 1. Press the FUNCTION button on unit to switch to BLUETOOTH function, the LCD will display and the pair indicator will flash at high speed. 2. Turn on the Bluetooth function on the device, scan the unit AWPSL6 and connect, then input the password 0000 if required, the pair indicator keep light up to indicate connection done, and the display will show steadily. Press Play to start playback. 3. Rotate the VOLUME knob on the unit or adjust the volume on the external device to increase or decrease the music volume to your desired level. 4. Press and hold the PLAY/PAUSE/PAIR/SCAN button to disconnect Bluetooth. Note: The Bluetooth works best within 10 meters in open air. AUX-IN OPERATION 1. Press the FUNCTION button on unit to select the AUX mode. 2. Connect your audio device to the AUX IN jack on the top panel of the unit with an AUX IN cable.(audio cable is not included) 3. Rotate the VOLUME knob on the unit or adjust the volume on the external device to increase or decrease the music volume to your desired level. 4. Control the playback with your audio device. MIC JACK OPERATION Microphone input is available in all modes. 1. Connect your microphone to the 6.3mm MIC JACK found on the top panel of the unit. 2. Rotate the MIC VOL. knob on the unit to increase or decrease the microphone volume. 3. Press the ECHO Button to turn on or off the echo effect of the microphone. 9 Technical Specifications GENERAL Power Requirements AC100-240V~60/50Hz Battery type Built-in rechargeable battery, 4000mAh/12V, lead-acid Power consumption 35W Power output 30W X 2 FM frequency FM 87.5-108 MHz AUX in jack 3.5mm Microphone jack 6.3mm Work temperature 5C - +35C USB memory section Playback format WMA/MP3 Memory 32MB to 32GB Bluetooth Communication system Bluetooth Standard version 2.1+EDR Reception Range 10 meter (line-of-sight distance) Compatible Bluetooth profiles Advanced Audio Distribution Profile (A2DP) ACCESSORIES Instruction Manual x 1pc AC Cord x 1pc Microphone x 1pc Note: Specifications are subject to change for continuous improvement without prior notice. 10