USER MANUAL
&
INSTALLATION INSTRUCTIONS WIRELESS SENSOR SIRES OF ERGOLAB Designation of type ErgoLAB USER MANUAL User Manual 1Overview. 2Technical Index. 3Indicator Light. 4Use Steps. 5Parameter Setting. . 5.1Channel Choosing. 5.2State Monitoring. 5.3Start Recording. 6Data Recording . 2 3 3 4 6 6 7 9 10 6.1Data Collecting. 10 6.2Interface Presenting. 11 12 6.3Data Analyzing. 7Tips. 13 Installation Instructions 13 www.kingfar.net 1 USER MANUAL it is short sensor is RF current, 1 Overview ErgoLAB wireless adopts RF technology. RF is short for Radio Frequency which for electromagnetic wave of high frequency and AC change. The frequency is very high, which can be used for sending radio frequency, generally to hundreds frequency band, that is VHF-UHF frequency band. And Higher frequency is called micro wave. Broadly speaking, micro wave on radio-frequency spectrum refers to radio wave of which the frequency is 300MHz-300GHz, specifically refers to 1-30 frequency band. RF has broad and irreplaceable function in the field of wireless communication. Electric to dozens refers www.kingfar.net 2 in restore distance long to USER MANUAL information source(simulation or numeral) is modulated(amplitude or frequency modulated) with high frequency current to form RF signal and sent to the sky by antenna; RF signal is received and counter-modulated to electric information source, this process is called wireless transmission. ErgoLAB wireless sensor adopts 2.4GHz RF technology, the volume is small and easy to wear. bits high-resolution and high speed, the sampling frequency reaches up to 4096Hz.Indoor data tracking is broad and prompt and can suppress noise. 2 Technical Index 3 samples takes 16 at It www.kingfar.net USER MANUAL Supplying battery Service time of battery Charging time Sampling rate Working frequency Transmission power Operating environment 3.7V,200mA 4-5h 1h Max4096Hz 2402 MHz 0dbm Temperature:-40~45 Humidity: <60%
size 36mm*22mm*11mm weight 20g 3 Indicator Light Green light: after starting the sensor, green light keeps on, when collecting data, green indicator light will flash at the frequency of one second. www.kingfar.net 4 USER MANUAL Red light: the sensor will self-test, red light will be put out 1s after it lights, when the capacity of battery is lower than 30%, red light will flash at the frequency of 1 second. Figure 1 4Use Steps It needs to combine with certain software when obtaining the data with this wireless sensor:
www.kingfar.net 5 USER MANUAL 1) Set the switch of wireless sensor to on, then green light lights, which indicates the wireless sensor is transmitting data;
2) Open ErgoLAB, choose wireless sensor collection module;
Figure 2 3) In software, chooseSTART to receive the data of wireless sensor. 4) In software, chooseSTOP stop receiving the data of wireless sensor, the data will save automatically. to Referring to the detailed process in the following part 5and part 6 :
www.kingfar.net 6 USER MANUAL 5Parameter Setting We need to set the parameter of sensor before receiving the data of ErgoLAB wireless sensor. 5.1 Channel Selection Wireless sensor has range of radio-frequency, in the software, we need to choose the channel of sensor, then refresh, search this sensor before receiving the data of sensor. Complete with channel of software. its own Figure 3 7 www.kingfar.net USER MANUAL 5.2 State Monitor After searching this sensor, it presents relevant information of this sensor, sampling frequency of sensor which needs to detect, battery state and steady state of signal;
Sampling frequency of sensor and current battery state:
Figure 4 We can continue with experiment or charge wireless sensor according to battery state. It is suggested that we should consider www.kingfar.net 8 USER MANUAL charging when capacity of battery is lower than 30%. Monitoring steady state of sensors signal:
Figure 5 If following cases were found:
Figure 6 In such case, data continues to be collected, but the collection of signal may interrupt, so it needs to monitor battery capacity of wireless www.kingfar.net 9 USER MANUAL sensor and pay attention if connection of sensor is unobstructed. 5.3 Start Recording When state monitoring is completed, it can normally search wireless sensor, and receive the data that sensor sends, we can click start to start collecting and recording data of sensor. Figure 7 When the color of start turns from blue to red, it means it is in the process of recording data. www.kingfar.net 10 USER MANUAL 6Data Recording 6.1 Collecting Data Figure 8 This is the interface of collecting data, up side shows collected data signal, down side shows data is being collected. If collection needs to be stopped, just click the red button:
Figure 9 11 www.kingfar.net USER MANUAL When red button occurs stop tip, click it to stop recording data. Data of wireless sensor will not be received. Received data will be automatically saved in the software. 6.2 Presentation Interface After data record is saved, recorded data of wireless sensor in this period of time can be replayed in software and processed. Figure 10 12 www.kingfar.net USER MANUAL 6.3 Data Analysis Collected data of wireless sensor can be compiled and analyzed in software. Figure 11 Figure 12 13 www.kingfar.net USER MANUAL 7Tips If red light of sensor flashes frequently, it indicates that the sensor is collecting data; if red indicator lights, it indicates the battery is low and needs to be charged promptly. INSTALLATION INSTRUCTIONS ErgoLAB wireless sensor Overview ErgoLAB wireless adopts RF technology, freely recording relevant data information. Appearance size of this sensor is only 43mm*26mm, its volume is small and easy to wear. sensor www.kingfar.net 14 USER MANUAL Technical index ErgoLAB wireless sensor adopts 2.4GHz RF technology, working on frequency band of 2.4 GHz ISM, ErgoLAB wireless sensor adopts 3.7V Li battery to supply power, it takes samples at 16 bits high-resolution and high speed, the sampling frequency reaches up to 4096Hz. Attention Warranty period of this product is 2 years. If quality problem is proved, Kingfar group will be responsible for maintaining or replacing. If not, Kingfar will not have this obligation. User should send written-notice to Kingfar in 30 days once finding quality problem. And www.kingfar.net 15 USER MANUAL the detailed description of quality attach problems. Attention before installing Please make sure the sensor can work normally and correctly collect data before installing on test person. When installing on the skin, lines of sensor should be arranged carefully, lead wires can not be crossed each other, or it will affect the test result. Warnning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including that may cause undesired interference www.kingfar.net 16 USER MANUAL operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 17 www.kingfar.net USER MANUAL ErgoLAB ErgoLAB www.kingfar.net 18 USER MANUAL 1. 2. 3. 4. 5. 5.1. 5.2. 5.3. 6 . 6.1. 6.2. 6.3. 7. 2 3 3 4 6 6 7 9 10 10 11 12 13 13 www.kingfar.net 1 USER MANUAL 1 ErgoLAB RFRadio Frequency VHF-UHF 300MHz-300GHz 130GHz ErgoLAB 2.4GHz 16bits 4096Hz www.kingfar.net 2 2 USER MANUAL 3.7V,200mA 4-5h 1h Max4096Hz 2402 MHz 0dbm
- 45
-40
<60%
36mm*22mm*11mm 20g 3 1 2 1 www.kingfar.net 3 USER MANUAL 1 1 1s 30% 1 1 4 www.kingfar.net 4 USER MANUAL 1ON 2 ErgoLAB 2 3START 4STOP 5 6 www.kingfar.net 5 USER MANUAL 5 ErgoLAB
:
.5.1 channel www.kingfar.net 3 6 5.2 USER MANUAL 4 30%
www.kingfar.net 7 USER MANUAL 5 6 www.kingfar.net 8 USER MANUAL 5.3 start 7 start www.kingfar.net 9 6 6.1 USER MANUAL 8 www.kingfar.net 9 10 USER MANUAL stop 6.2 10 11 www.kingfar.net 6.3 USER MANUAL www.kingfar.net 11 12 12 USER MANUAL 7 ErgoLAB ErgoLAB 43mm*26mm ErgoLAB 2.4GHz , 2.4 GHz ISM 2402 MHz www.kingfar.net 13 USER MANUAL ErgoLAB 3.7V 6bits 4096Hz 2 30 www.kingfar.net 14