User's Guide MLWG3 Getting Started Step 1 Charge your MLWG3 Device Before using, make sure your MLWG3 is fully charged. To charge, connect the included USB cable to your MLWG3s mini USB port (1) and the other end into an available USB port on your computer or to a USB wall adapter. The green power light will stop _ashing when MLWG3 is fully charged. Step 2 Add Content to your MLWG3 Windows users: When connecting your MLWG3 to your computer, two drive letters will appear in Windows Explorer one Read-Only labeled CDROM and one Removable Disk labeled MLWG3 Double-click on the drive labeled MLWG3 to add your content. Transfer your _les the same as you would for any USB drive; drag or copy _les from your computer to your MLWG3 device Mac users: By default when connecting your MLWG3 to your computer, two drives will appear on your desktop one Read-Only labeled CDROM and one Removable Disk labeled MLWG3 Double-click on the drive labeled MLWG3 to add your content. Transfer your _les the same as you would for any USB drive; drag or copy _les from your computer to your MLWG3 device.
(It is recommended that you organize your content by creating folders, e.g., Videos, Music, Pictures and Documents) Step 3 Download Kingstons Free MLWG3 App from the App Store Visit Apples App Store and search for Kingston MLWG3. Figure 1 Kingstons MLWG3 App Icon Step 4 Power on the MLWG3 by pressing the On/Off button
(2).*
*Note: After you power on, wait for Blue Wi-Fi Activity Light to start _ashing before proceeding to the next step(3). Step 5 Go to the Settings icon on your iPad, iPhone, or iPod touch and select Wi-Fi. Con_rm that Wi-Fi is ON. Select Kingston MLWG3 under Choose a Network and click on it to connect to it. Step 6 Once connected, open the Kingston MLWG3 app on your iPad, iPhone, or iPod touch and enjoy your new expanded storage. Step 7 Share your content with as many as three users by having them follow steps 3 to 6. A. USB 2.0 port - Allows you to connect an external USB Storage Device to MobileLite Wireless G3. It also allows you to charge your mobile device. B. SD slot - Allows you to connect a memory card (SD/SDHC/SDXC or any microSD w/ adapter) to MobileLite Wireless G3. (Optional: no built-in capacity or 64GB) C. Battery LED/Power* - Indicates current battery status and current power state. D. Wi-Fi LED - Indicates current status of Wi-Fi broadcast. E. Bridged LED - Indicates whether or not MobileLite Wireless G3 is bridged to an Internet gateway via Wi-Fi or Ethernet. F. Power button - Powers on or powers off the MobileLite Wireless G3 device. Short press (1 second): Power bank mode/Long press (3 seconds): Wi-Fi mode. G. Reset button - Allows you to reset the MobileLite Wireless G3 device to its original
(default) configuration. Hold the button down for more than 10 seconds. H. Micro-B USB port - Allows you to charge MobileLite Wireless G3 or connect it to a standard USB port on your computer for fast, easy data transfer. Each media expansion port will require its own drive letter if media are inserted. I. Ethernet port Allows you to connect an Ethernet cable to create a hotspot for wireless internet access. Wi-Fi mode will temporarily disable while connected to Ethernet.
*
The battery LED also indicates how much battery time is left while the MobileLite Wireless G3 is powered on. Green indicates 51% - 100%
battery charge remaining; orange indicates 25% - 50%
battery charge remaining; and red indicates less than 25% battery charge remaining. Product Content:
1 station MobileLite Wireless G3 Note: This product has a black and white two kinds of housing 1 strip the USB cable (45 cm, A turn Micro-B connector) 1 inner bond MicroSD 64G card 3.Connect the equipment into and outlet on a circuit different from that to which the receiver is connected. 4.Consult the dealer or an experienced radio/TV technician for help. Any special accessories needed for compliance must be specified in the instruction manual. Warning: A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the nearby radio and television reception. It is essential that only the supplied power cord be used. Use only shielded cables to connect I/O devices to this equipment. CAUSION: Any changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. FCC Compliance and Advisory Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, according to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try correct the interference by one or more of the following measures:
1.Reorient the receiving antenna. 2.Increase the separation between the equipment and receiver. Required notices to the User of Canada (RSS) IC statement CAN ICES-3
(B)/NMB-3(B) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lappareil ne doit pas produire de brouillage, et (2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Complies with IDA Standards DAXXXXXX http://www.kingston.com/us/landing/widriveplus/
MLWG3 1- MLWG3 MLWG3 USB MLWG3 microUSB (1) USB USB MLWG3 2- MLWG3 Windows MLW SSID ( SSID MLW MAC ) Windows
-
MLW--MLW admin, USB, SD Internal USB Mac Mac MLW SSID SSID MLW MAC ), MAC Go -> Connect to Server, smb://192.168.202.254 or smb://192.168.203.254 admin, USB, SD Internal USB
(
) 3- App Store(
MobileLite Apple App Store(MobileLite 4 On/Off (2) MLWG3
* Wi-Fi
(3) 5 iPadiPhone iPod touch Wi-Fi Wi-Fi MLW SSID 6 iPadiPhone iPod touch MLW MLWG3 7 3 6 MLWG3 A. USB 2.0 - USB MobileLite Wireless G3 B. SD -
(SD/SDHC/SDXC microSD ) MobileLite Wireless G3( 64GB) C. LED /* -
D. WiFi LED - WiFi E. LED -
MobileLite Wireless G3 Wi-Fi F. - MobileLite Wireless G3 (1 )
/ (3 )Wi-Fi Wireless G3 USB G. - MobileLite Wireless G3 (
) H. Micro-B USB - MobileLite I. Wi-Fi
* LED MobileLite Wireless G3 51% - 100%
25% - 50%
25%
1 MobileLite Wireless G3 1 USB (45 A Micro-B 1 MicroSD 64G
)
[]
MPE 1mW/cm2
(0.028) mW/cm2