User Manual Product Name: Bluetooth speaker Model: P10,P16 Manufacture: KINGTA TECHNOLOGY CO., LTD P10 Introduction Thank you for choosing the P10 as your source for e n t e r t a i n m e n t ! you can use this item with iPads , iPhones,iPods and many types of smartphone to stream music ,and enjoy handsfree calling.In order to get the best results when using the device,please read this manual first before using. Description:
1.ON/OFF /Play/Pause/Phone button 2.multiple point button 3.Previous/Volume 4.Next/Volume +
5.Bluetooth LED 6.MIC 7.Micro USB Charging Port 8.AUX in Port Included:
1.Speaker 2.USB Micro Charging Cable 3.3.5 mm Audio Cable 4.User Manual Specifications Supported Profiles: A2DP, HFP, AVRCP,HSP Bluetooth Range: 33ft (10m) Dimensions: 120 mm x 120 mm x 60mm Battery: Li-Ion 3.7V, 2400 mAh Charging: DC5V0.5/650mA Weight: 412g Operation Powering On Press and Hold "
Powering Off Press and Hold "
" button 2 seconds to power ON .
" button 2 seconds to power off . to start playing music Begin Streaming Music Press Press and Hold Press and Hold Press either or 2 seconds to play the next track 2 seconds to play previous track for volume control Making and Receiving Phone Calls When the unit is connected and paired to your device, the unit allows you to make or receive phone calls with its built-in microphone. Press To end a call press to accept a call Bluetooth Mode Pairing In order to pair your Bluetooth audio device to your Bluetooth Speaker for the first time, follow the steps below:
1. Make sure your Bluetooth audio source is held within ten meters of your speaker. 2. Press and hold Speaker, entered pairing status. 3. Go to the Bluetooth Manager of your Bluetooth audio source. Please refer to the Users Manual of your Bluetooth audio source for more information. 4. Search Bluetooth devices and select P10 to power on the Bluetooth LED will be blink to indicate shave 5. Once paired, the your speaker to listen to audio from you Bluetooth sound source. will be solid and you can use
*** P10 support reconnection function Note: Bluetooth Timeout :10 minutes Aux-In Mode Plug in the supplied 3.5 mm cable into the unit. The other end is connected to your device. The unit will automatically enter the Aux-In Mode . Please note music and volume can be controlled by your device. Bluetooth Disconnection When the unit is connected and paired to your device, press and hole "
to disconnect the Bluetooth Mode Charging Attach the USB cable to the unit, and plug into any USB charger. If the unit is completely discharged, it will take approximately 4 hours to fully charge. These three key lights will be slow lighting alternating when charging , They will stop and keep fully charging . lighting once Note:There will be a beep when the battery is low and needs to be recharged. Multiple point function ( TWS Wireless Stereo Mode ) If you have two pieces P10, you can use TWS to achieve wireless stereo combined playing music. 1 Make sure two P10 is without any Bluetooth connection. 2 Power on both speakers, and press one of the speaker, the two speakers will connect button on LED blink on keeps solid automatically with separate tone. When the one speaker and on the other one, it means the TWS connection is successful. 3 Then you can search Bluetooth Device and select P10. 4 Bluetooth Disconnection 2 seconds to disconnect the Press and Hold Bluetooth Mode. 5 Press and Hold "
the units , both units will be power off
" button 2 seconds on one of Troubleshooting Unit doesnt connect to device A tone is heard every few seconds Speaker needs to be connected/re-paired to device Speaker needs to be charged Unit will not power on Speaker needs to be charged Unit doesnt control track(s)/volume Unit distorts at high volume Speaker needs to be in Bluetooth mode for full control The devices volume needs to be lowered FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.