Waterproof Wireless Speaker User Manual
Package contents
Introduc�on
Thank you for purchasing this product. You can use this item with Pads , Phones, Pods and many types of
Smart phone to stream music, and enjoy hands-free calling. In order to get the best results when using the
device, please read this manual first before using.
Q29
Features
IPX6 Water resistant Bluetooth Speaker
Perfect fabric speaker with rubber control panel
Rich and powerful sound output ( 10W*2=20W output )
Unique and patent design
Support TWS func�on
Type-C port
With adjustable LED light modes
Removable lanyard
Support AUX in func�on
Support TF card
Support USB func�on
Specifica�ons
Bluetooth version: 5.0
Loudspeaker: φ52mm 4Ω 10W *2
Built-in ba�ery: Li-ion 7.4V/2000mAh
Size: φ83.0mm*H205.0mm
SNR: >80dB
Bluetooth Frequency: 2.402-2.480 GHz
Wireless Transmission Distance: up to 10m
Charging �me : Approx. 3 hours
Weight: 0.72kg
Sensi�vity : - 90dBm
Input: DC5V, 1A
Profile: A2DP/AVRCP/HFP/HSP/OPP/HID/SPP/PBAP/GATT/SM
Audio Decoding: MP2, MP3, WMA, APE, FLAC, AAC, MP4, M4A, WAV(IMA - ADPCM & PCM), AIF, AIFC
1* Water resistant IPX6 speaker
1* USB to Type-C charging cable - 50cm
1* 3.5mm to 3.5mm AUX cable - 50cm
1* User manual
Important Safety Precau�ons
When using your Bluetooth Mobile Speaker, basic safety precau�ons should always be followed,
including the following:
• Keep this product and its accessories away from excessive heat.
• Do not operate this device with a damaged cable or a�er it has malfunc�oned or has been damaged
in any manner.
• No sharp object should be subjected to the speaker/speaker-drivers as it may damage the speakers.
• Only use a so� cloth, no harsh abrasives or chemicals to clean, as it may damage the surface finishing.
• Ensure the speaker is waterproof by removing all the connected cables and the cap is �ghtly closed
before exposing the speaker to liquid.
• Do not expose the speaker to water while charging, as doing so may result in damage to the speaker
or the power source.
Charging your Speaker
1. Connect one end of the included USB Charging Cable to the Charging Port on your speaker. Then plug
the other end of the USB Charging Cable into a suitable USB port on your computer, notebook or power
bank to recharge your speaker's internal rechargeable ba�ery.
2. When charging, a red LED light will illuminate to indicate that the unit is charging. The red light will turn
off when your unit is fully charged(under both turn-on/off speaker status)
A Quick Look At Your Speaker
1
2
3
4
5
6
7
1.Power on/off Bu�on:
To power on your speaker, press and hold the Bu�on.
To power off your speaker, Press and hold the Bu�on.
Press the Bu�on when music is playing to pause the music.
Press the Bu�on when music is paused to begin playing again.
8
9
2.Next song / Vol + Bu�on:
To skip to the next track, press the Bu�on. To raise the volume, press and hold the Bu�on.
3.TWS Bu�on:
1)TWS mode:
If you have two Q29, you can use them both in sync to listen in True Wireless Stereo (One speaker will play only the le�
channel, the other will play only the right channel).
A)Make sure both Q29 are without any Bluetooth connec�on.
B)Power on both units and press bu�on on one of speaker. The two speakers will connect automa�cally and you
should hear the indica�ng tone. When the blue LED blinks quickly on one unit and blinks slowlyon the other, the TWS
has connected successfully.
2)Hands free func�on:
A)Accep�ng or ending a call (during music playback included): Upon hearing the incoming call tone, press the Bu�on
once to answer the call. This will also pause your music. Press the Bu�on again to end the call. Music will resume.
B)Rejec�ng a call (during music playback included): Upon hearing the incoming call tone, press and hold the Bu�on
to reject the call.
4.Previous song / Vol - Bu�on:
To go back the previous track, press the Bu�on for 1 second. To lower the volume, press and hold the Bu�on
for more than 1 second.
5.Light Bu�on:
Press the Bu�on to se�ng the ligh�ng mode:
A)Light with music(under music mode)
B)Single color switch: Red/Purple/Blue/Sky blue/Green/Aqua
C)Breathing light color switch
D)Light off
6.AUX in port : Use the a�ached 3.5mm to 3.5mm audio cable to connect the speaker and an analog audio source.
7.Type-C charging port: Use the a�ached Type-C to USB charging cable to charging your speaker.
8.TF card port: Use TF card to enjoy the music, insert the TF card and speaker will turn on TF card mode automa�cally.
When U disk plug out , the speaker will turn to Bluetooth mode.
9.USB port: Use U disk to enjoy the music, insert the TF card and speaker will turn on USB mode automa�cally. When U
disk plug out , the speaker will turn to Bluetooth mode.
Bluetooth Pairing Procedure
1.Turn on you mobile device and go to the Bluetooth menu.
2.Make sure the speaker is within three meters from the mobile device.
3.Press and hold the
entered paring mode.
4.Select 'Q29' on the Bluetooth device menu. Ensure that the device shows 'Connected' in the status display. (If a PIN is
required, enter 0000.)
5.Press the
Bu�on on your speaker to power on. The LED light will blink blue to indicate that you have
bu�on twice to disconnect the Bluetooth mode.
True Wireless Stereo (TWS) Func�on
If you have two Q29, you can use them both in sync to listen in True Wireless Stereo (One speaker will play only the le�
channel, the other will play only the right channel).
A.Make sure both Q29 are without any Bluetooth connec�on.
bu�on on one of speaker. The two speakers will connect automa�cally and you
B.Power on both units and press
should hear the indica�ng tone. When the blue LED blinks quickly on one unit and blinks slowly on the other, the TWS
has connected successfully. The le� channel is master speaker and the right channel is slave speaker.
C.Under connec�on, search Bluetooth device and select 'Q29'.
D.Hands-free func�on is only available on the master speaker.
E.Under TWS status, if the slave speaker is turned off, the master speaker will con�nue to play music.
If the slave speaker is turned on again, the two units will automa�cally reconnect to TWS status and
con�nue to play music
F.Under TWS status, if the master speaker is turned off, the slave speaker will not turn off, but the music
will stop. A�er the master speaker is turned on again, it will reconnect to TWS and then reconnect Bluetooth.
Press the bu�on to play music.
Reconnec�ng to a disconnected device
1.If previously connected to a Bluetooth device, the Q29 will automa�cally reconnect with the device when
powered on.
2.The speaker will not automa�cally reconnect if the 10 meters distance is exceeded.
Sleeping mode
1.If no Bluetooth device becomes available, the speaker will power off automa�cally a�er 10 minutes.
2.If the speaker connected to device without playing music, the speaker will power off automa�cally
a�er 10 minutes.
AUX mode
1.Use the 3.5mm to 3.5mm (included) to connect to the 3.5mm Aux input jack on the speaker.
2.Connect the other end to the analog audio source.
3.Set the desired volume on the a�ached device. The blue LED light will be solid.
4.Press and hold bu�on to increase the volume
5.Press shortly bu�on to lower the volume
6.Press shortly bu�on to mute the speaker
FCC Statement:
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1)
this device may not cause harmful interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try correct the interference by
one
or more of the following measures:
- Reorient the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into and outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance could void your
authority to operate the equipment.